Need help adding audio to a slideshow in iDVD. I don't see my playlists.

I'm a relatively new Mac user & am trying to create my first DVD ever. I'm just learning as I go. I'm trying to create a slideshow with about 400 pictures to show at a "Going Away" Party. I've created a playlist to go along with it, but when I click on Audio & then on iTunes, it pulls up all of my songs in my whole library, but doesn't show my playlists anywhere. When I click on "help" it tells me that I should be able to go to Audio, click on iTunes, click on "library", & then find my playlist. However, I don't see "library" under iTunes. Help!

+but is it possible to make many different slideshows on the DVD but somehow have it play automatically from one to the other+
No. You can do that in DVD Studio Pro.
Here's a couple of examples of how I did these projects a couple of years ago:
*Mediterranean 2003 cruise*
I had over 1000 images from a Mediterranean cruise. I broke them down in to 24 Albums in iPhoto (fewer than 99 images each). In iDVD, I created 6 Folders which created sub-menus. Main Menu buttons (folders/slideshows) such as Barcelona, French Riviera, Florence, Rome, Naples, Malta. Then I added each of the corresponding 24 iPhoto Albums to those 6 slideshows, thereby creating 24 total slideshows on sub-menus. Takes some planning. All slideshows had transitions and music.
*Ireland 2004 iDVD Project*
Nearly 800 images dragged into iDVD as organized folders from the hard drive. Transitions on each image, and menus, sub-menus, and sub-sub menus. The sub-menus are created by clicking on the Folder icon on the iDVD interface.
Main Menu has 6 buttons: Downpatrick, Antrim Coast, Letterkenny, Sligo, Trim, and Extras. Behind each button are additional buttons ranging from 3 to 6 buttons. The Extras button goes fairly deep. When you click on Extras, it gives you 3 choices on a new menu. The "B&Bs" button opens a new menu with 5 buttons. The "Movies" button opens a new menu with 4 buttons. If you click on the "Irish Music" button, you open a new menu with 2 buttons. At that point, you are at a "sub-sub-sub menu."
Music was on most of the slideshows. Some movies converted to QT DV from Canon S400 digicam .AVI files (iDVD 4). Now convert to H.264 with QuickTime 7. Images are original 4MP (2MB) JPEG images from the same digicam. This DVD project is around 4GB with all pictures as DVD-ROM content.

Similar Messages

  • I need help adding a mouse motion listner to my game. PLEASE i need it for

    I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
    i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
    i am able to shoot targets but it jus clicks to them ive been using this:
    public void mouse() {
    dotX = mouseX;
    dotY = mouseY;
    int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
    if(d < 15) {
    score++;
    s1 = "" + score;
    else {
    score--;
    s1 = "" + score;
    and here's my cross hairs used for aiming
    //lines
    page.setStroke(new BasicStroke(1));
    page.setColor(Color.green);
    page.drawLine(dotX-10,dotY,dotX+10,dotY);
    page.drawLine(dotX,dotY-10,dotX,dotY+10);
    //cricle
    page.setColor(new Color(0,168,0,100));
    page.fillOval(dotX-10,dotY-10,20,20);
    please can some1 help me

    please can some1 help meNot when you triple post a question:
    http://forum.java.sun.com/thread.jspa?threadID=5244281
    http://forum.java.sun.com/thread.jspa?threadID=5244277

  • Need help adding schedule to xcode 4

    I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

    I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
    I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
    I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
    As you can see, I'm low tech!
    Good luck!
    Powerbook G4   Mac OS X (10.3.9)  

  • I Need help. I Change My Number and now imessage don t work.

    I Need help. I Change My Number and now imessage don t work.

    Hi Ivonka88,
    Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers!
    - Ari

  • So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

    So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you aren't getting the link then that implies that you don't have one and you won't be able to add one until you can answer 2 of your questions - you will need to contact iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been resetyou can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Need help adding Arch to Grub

    I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l  I need help!

    Fdisk -l
    Disk /dev/sda: 80.0 GB, 80026361856 bytes
    255 heads, 63 sectors/track, 9729 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0xb38ab38a
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1        9544    76662148+  83  Linux
    /dev/sda2            9545        9729     1486012+   5  Extended
    /dev/sda5            9545        9729     1485981   82  Linux swap / Solaris
    Disk /dev/sdb: 40.9 GB, 40992473088 bytes
    255 heads, 63 sectors/track, 4983 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x0002eb1f
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1   *           1        4891    39286926   83  Linux
    Disk /dev/sdc: 250.0 GB, 250059350016 bytes
    255 heads, 63 sectors/track, 30401 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x000ea9be
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdc1               1       30401   244196001    7  HPFS/NTFS
    I think Arch is on the 40GB partition
    Menu.lst
    # menu.lst - See: grub(8), info grub, update-grub(8)
    #            grub-install(8), grub-floppy(8),
    #            grub-md5-crypt, /usr/share/doc/grub
    #            and /usr/share/doc/grub-doc/.
    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default        0
    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout        0
    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    hiddenmenu
    # Pretty colours
    #color cyan/blue white/blue
    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line)  and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    ## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret
    # examples
    # title        Windows 95/98/NT/2000
    # root        (hd0,0)
    # makeactive
    # chainloader    +1
    # title        Linux
    # root        (hd0,1)
    # kernel    /vmlinuz root=/dev/hda2 ro
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below
    ## DO NOT UNCOMMENT THEM, Just edit them to your needs
    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ##      kopt_2_6_8=root=/dev/hdc1 ro
    ##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=ce3a864f-3f72-480b-96b3-54516b307170
    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ##      alternative=false
    # alternative=true
    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ##      lockalternative=false
    # lockalternative=false
    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=quiet splash
    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ##      lockold=true
    # lockold=false
    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=
    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0
    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ##      altoptions=(recovery) single
    # altoptions=(recovery mode) single
    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ##      howmany=7
    # howmany=all
    ## specify if running in Xen domU or have grub detect automatically
    ## update-grub will ignore non-xen kernels when running in domU and vice versa
    ## e.g. indomU=detect
    ##      indomU=true
    ##      indomU=false
    # indomU=detect
    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ##      memtest86=false
    # memtest86=true
    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false
    ## should update-grub add savedefault to the default options
    ## can be true or false
    # savedefault=false
    ## ## End Default Options ##
    title        Ubuntu 9.04
    uuid        ce3a864f-3f72-480b-96b3-54516b307170
    kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
    initrd        /boot/initrd.img-2.6.28-11-generic
    quiet
    #title        Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
    #uuid        ce3a864f-3f72-480b-96b3-54516b307170
    #kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro  single
    #initrd        /boot/initrd.img-2.6.28-11-generic
    #title        Ubuntu 9.04, memtest86+
    #uuid        ce3a864f-3f72-480b-96b3-54516b307170
    #kernel        /boot/memtest86+.bin
    #quiet
    # (0) Arch Linux
    title  Arch Linux 
    root   (hd1,0)
    kernel /vmlinuz26 root=/dev/sda3 ro
    initrd /kernel26.img
    ### END DEBIAN AUTOMAGIC KERNELS LIST
    title Arch
    rootnoverify (hd0,1)
    chainloader +1

  • Need help, No audio for mpeg on Quicktime

    Ok, the other day i downloaded a third party movie player that played movies that quicktime wouldnt play. It was MplayerOSXB8r5 and it worked ok. When i tried to play my regular mpegs that worked fine with quicktime i got no audio. the avi files work just fine, its only my mpeg movies that wont play with audio.
    So i trashed the Mplayer hoping the problem would be fixed & nothing. I downloaded quicktime pro & nothing. I need help in fixing this problem.
    any suggestions

    Flip replies:
    We have recently become aware of an audio compatibility issue revolving around Flip Video and the latest QuickTime 7.4.5 update running on the Mac OS X 10.4 Tiger operating system. Apple is aware of the issue and is investigating it with Flip Video.
    This issue does not affect customers running the Mac OS X 10.5 Leopard operating system.
    Several customers have reported that they have had success using the QuickTime components available from Perian (http://perian.org). Please note that we cannot officially recommend this as we have not fully tested the application, nor do we have knowledge of what other applications may be affected.
    We apologize for any inconvenience this may have caused. Please do not hesitate to contact us for further assistance.
    Thank you,
    PS: Perian does me no good. A friend with 10.5 says he has no problem, just as indicated above.

  • I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

    I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article.  I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

    The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
    The issues are to do with your web page not with Pages.
    I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
    The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
    Nor to what those links would be to.
    From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
    Peter

  • ComboBox (dropdown) Need Help Adding URL links!!!

    I am somewhat of a newbie....Anybody know how to use URL
    links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
    make it so that after selecting an option, the user is directed to
    another URL within the same browser window. Using flash 8!
    Thanks,

    Im a bit a newbie myslef but i think you make flash
    commuincate to javascript wich will make the browser goto the URL.
    do a search on getURL and javascript together and i am sure
    you will find something.
    And when slecting to redirct i think its on?(onPress)
    something so maybe look throught the help section in flash 8 and
    look at componets. I think there is some actionscript help there.
    Sorry i could not be more helpful.

  • Need help with Audio controller or cue points

    Haven't set up the actual project yet. Just trying to
    determine best method. Will be using Flash Pro 8.
    Goal: create an initial page showing a TOC that represents
    chapters in an hour long audio piece. Clicking a topic brings them
    to a certain point in the audio. Once leaving the TOC, the user
    will see a still PPT jpg associated with that section of audio. But
    they'll also need access to an audio controller so they can scrub
    to different portions of the audio. Once they let up, the PPT image
    needs to change -- if they went to a different section.
    So at first I thought about a regular flash set-up with the
    audio spanned throughout the timeline, PPT images set-up throughout
    the timeline, and frame labels to jump to. But I couldn't figure
    out how to set up an audio controller with this set-up.
    Then I thought about a Flash Slide Presentation set-up using
    a Media Playback component with the Media Controller component and
    cue points. I've looked at some of the on-line examples of this and
    they seem to work when playing forward but I notice that when you
    scrub backwards that the images fall out of synch. It seems if you
    have cues A, B and C and if you begin dragging from the C cue and
    let up BEFORE the B cue the image displays B. It should be
    displaying A though since your somewhere in-between A and B. But A
    doesn't show unless you scrub back far enough to cross the A cue
    time.
    So what is the best method. It seems the latter if there was
    only a way to calculate the time between the two cues. For instance
    "if time is >A but <B then display A".
    But the first example with the long timeline and frame labels
    would be fine if there was a nice controller out there that I could
    implement.
    And remember I need to be able to jump to any spot in the
    audio clip from the TOC menu on the first screen.
    Thanks!

    Is it AVCHD, Mini-DV, or DVD?  What format does the camera record to?

  • Need help adding avatar and signature to outgoing email messages

    I am trying to put an avatar and signature on my email messages. The mail Help files tell me to go to Mail-preferences and click signatures. When I got to Mail- preferences I don't see any options for clicking signature-only account information, special preferences and advanced. Please advise. Thanks much.

    Hello and welcome to Apple discussions.
    When you are in Mail Preferences, from the menu, click on View, then select Show Toolbar. Then you will see the Signature panel.

  • I need some help adding music to my slideshow in iPhoto.  When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

    When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

    When I open iTunes as the source, it says it needs to be open to populate, which it is.  I have no knowledge of computers...like, at all....so I need some (simple) help?  If possible?  Thanks.

  • Need help with audio portion of iDVD

    I have added a playlist from iTunes to a slideshow. When I play it on slideshow, all music in the slideshow is played. However, when I export to iDVD and play back the slideshow, only the first song plays. The rest of the slideshow has no music playing once the first song ends. Help! Thank you!

    Hi jMoose and welcome to the forums!
    My bet is that the audio tracks that won't transfer to iDVD are purchased tracks in iTunes rather than from your own CDs?
    If so what you are up against is DRM copy protection. The workaround is to burn a CD in iTunes of those tracks you need, then re-import them from that CD into iTunes and save them as AIFF files.
    Then iDVD will use them with a smile!

  • Need help adding video to a site

    Hi Everyone:
    I really need some help please. The owner of a site I am
    working on sent me a DVD with video's he has taken and wants them
    put on his site.
    The files are VIDEO_TS and are MPEG files. How can I add the
    video's to the site so that when I user clicks on the link, they
    are able to either view the site or download the video to watch
    later. I have other video's added to the site but I was able to
    copy them and safe them the way there were added. The owner sells
    products from the site I copied them from.
    The site I am working on is www.buggyworld.net. Most of the
    individual pages for the vehilces have videos on them and I am
    trying to add these new ones the same way. I have never done this
    before so really not sure how to. The videos that are already added
    at Windows Media Audio/Video Files and that is how I would like to
    convert this video to.
    Any help would be so greatly appreciated.. thank you
    Linda

    Best bet would be to make Flash video so that everyone who
    wants to (and has
    the Flash Player plugin) can see them. Do you have Flash?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Frank Branker" <[email protected]> wrote in
    message
    news:f4ph73$rcd$[email protected]..
    > What?s the size of your MPG file?
    >
    > It?s better if you convert your file to a wmv file
    format because it?s
    > important to keep your file size under 6 Megs. Do you
    have the software to
    > do
    > this?
    > Windows Movie maker might be able to do this you can
    find it in your
    > program
    > files on your computer.
    >
    > If not we will have to work with what you have and do a
    quick and dirty
    > but I
    > don?t advise that.
    >
    > Below is a list of tools you may want to consider
    owning.
    >
    > Ripping Software
    > This software will rip from a dvd to just about any
    format including WMV
    >
    http://www.imtoo.com/dvd-ripper.html
    >
    > Compressing software
    > Sorenson Squeeze Suite 4.5 is the industry-leading video
    encoding tool
    >
    http://www.sorensonmedia.com/pages/?pageID=2
    >
    >
    >

  • Need help with audio on button ASAP THANKS!

    Hi,
    Using CS3 I added via properties audio to the "over" part of a gold button.  The audio I added is 4Mb in size which I had imported to the library.  When I selected "over" on the button and then using properties assigned the audio file .... the wave form appeared ... but not under "over" but over, down and hit.  Thus when I publish what is happening is the page loads fine ... the audio begins to play on roll over as wanted ...
    HERES THE GLITCH:  if you accidently roll over again a new audio begins to play out of sync with the first one ... basically you get the row, row row your boat effect where each roll over audio is delayed.
    MY FAILED SOLUTION:  I tried to move the audio file and assign it via properties under hit. Thus have to have someone click on the sound.  Yet the same outcome happend where the wave form appeared not just under hit but it showed on over, down and hit. The same thing happened when I tried assigning to "down".
    MY QUESTIONS:
    Is this caused by the sound file being too big?  I tried a small audio beed and it would assign directly under the part I assigned but not with the bigger 4MB audio file.
    If it is the size of the sound file, can I link the button to an external audio file. If so, what code would I use if I am using Action Script 2.0. I am very new at action script.
    If it is not the size, could some one please tell me how to fix this glitch.  I would be satisfied with the button working on either over or hit.  If you wish to see what the button is doing, you can see it online at www.signaturehill.com.
    THANKS.

    Hi Erika,
    That might just be what I need ... but I am confused as to where do put the action code.  Can you help me with the following questions:
    1. Did you put it inside the button via actionscript or did you select the button just and ad it there ...  or somewhere else? Since I have several buttons doing the same thing on different pages, I am not sure where to put it.
    2. What was the exact code you used  ie  on (release)  {....   StopAllSounds(); }  .... did you even use "release" or some other mouse event.
    Please include the action script code I might try since I am very new to scripting. THANK YOU>

Maybe you are looking for

  • Help with PS Elements?

    Says my redemption code does not exist. It does. I've entered it 11 times!!!!!! I'm trying to get a serial number for Photoshop Elements.

  • Report for wrongly posted vendors

    Hi All,             I have made payment to the wrong vendor and the check also realised. At that time I passed a jv to balancing the account instead of creating credit memo. Now I would like to get a report like what are the vendors has been wrongly

  • Table name decided at runtime - How to do a select?

    Hi, Searching these forums I found how to do a select * from where the table name is decided at runtime. You use paranthesis on the variable containing the table name. However, I still get syntax error I can't solve and need some help. This syntax do

  • PSE 10, Adobe Bridge

    I installed PSE 10 on my Mac, left PSE 9 installed, and removed PSE 8. Apparently PSE 8 and Bridge CS4 are not separate programs - although they appear separate to the user.  I had no intention of removing Bridge as it has been a valuable and highly

  • How to stop Flash Screen?

    Hello!! I have a JSP page which has iFrame. <iframe src="test.jsp" name="printframe" width="0%" height="0%" onLoad="abc();" > </iframe>I am generating PDF content in the iFrame and I am able to do that successfully. But the problem is, whenever I gen