Need Help Adding Movie Artwork
Whenever I try to add a JPEG poster to one of my movies, nothing happens. In album view, there's a snapshot of the movie, but the snapshot doesn't appear in get info nor does "remove downloaded artwork" get rid of it. Does anyone know how to fix my problem so I can have artwork for my movie? Thanks!
Another one I'll have to try tonight.
It would also be nice to be able to have 1 artwork for an artist, so if you have 5 videos from 1 artist, they went under 1 category and you had control of the artwork that was on the link to that artist.
Similar Messages
-
I need help adding a mouse motion listner to my game. PLEASE i need it for
I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help meplease can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277 -
Need help adding schedule to xcode 4
I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????
I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9) -
I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!
Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1 -
I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.
The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter -
ComboBox (dropdown) Need Help Adding URL links!!!
I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful. -
Needs help adding images to movie clips and referencing the frames
i havent started with a blank, script made movie clip.
I want to add frames from action script 2, and be able to
reference/show the induividual frames for a video game and not a
movie. I dont realy need animation, i just need certain frames to
show, that i want to load load(from a non script made movie clip
with one loaded frame(bitmap data).you can't add frames to a movieclip using actionscript. so,
if that's what you're trying to do you'll need to find some other
way to accomplish your goal. -
Need help adding video to a site
Hi Everyone:
I really need some help please. The owner of a site I am
working on sent me a DVD with video's he has taken and wants them
put on his site.
The files are VIDEO_TS and are MPEG files. How can I add the
video's to the site so that when I user clicks on the link, they
are able to either view the site or download the video to watch
later. I have other video's added to the site but I was able to
copy them and safe them the way there were added. The owner sells
products from the site I copied them from.
The site I am working on is www.buggyworld.net. Most of the
individual pages for the vehilces have videos on them and I am
trying to add these new ones the same way. I have never done this
before so really not sure how to. The videos that are already added
at Windows Media Audio/Video Files and that is how I would like to
convert this video to.
Any help would be so greatly appreciated.. thank you
LindaBest bet would be to make Flash video so that everyone who
wants to (and has
the Flash Player plugin) can see them. Do you have Flash?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Frank Branker" <[email protected]> wrote in
message
news:f4ph73$rcd$[email protected]..
> What?s the size of your MPG file?
>
> It?s better if you convert your file to a wmv file
format because it?s
> important to keep your file size under 6 Megs. Do you
have the software to
> do
> this?
> Windows Movie maker might be able to do this you can
find it in your
> program
> files on your computer.
>
> If not we will have to work with what you have and do a
quick and dirty
> but I
> don?t advise that.
>
> Below is a list of tools you may want to consider
owning.
>
> Ripping Software
> This software will rip from a dvd to just about any
format including WMV
>
http://www.imtoo.com/dvd-ripper.html
>
> Compressing software
> Sorenson Squeeze Suite 4.5 is the industry-leading video
encoding tool
>
http://www.sorensonmedia.com/pages/?pageID=2
>
>
> -
Flash Newbie needs help with Movie Clips/Action Scripting
Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
CarolineEach layer has a blank keyframe before and after each
movieclip. Each movie clip is at a different frame. Even with the
blank keyframes added, the second video starts to play and then the
first video begins to play. Same happens if I click on the third
button. Third plays, and starts 1st and 2nd shortly thereafter. Is
there an action script I can put in that will tell the timeline
that, when a button is clicked, no matter where the movieclip is,
it will stop and start the newly selected movieclip? -
Flash CS5 Newbie - Need help adding URL link to animated banner
I apologize if this is a very basic question, but I am a newbie at designing in Flash. I have created a basic animation in Flash CS5 and I need to add a clickable URL link to it. I've tried a few tutorials that looked promising, but none of them solved my problem. I've tried a number of things including converting parts or all of the images to simple buttons or movies and linking them that way as well as typing in code for ActionScript 2 and 3, none of which were successful. The animation plays correctly when viewed in my browser, but when I click on it, the link does not work. I would prefer that the entire banner be clickable to take viewers to the linked website rather than using hyperlinked text. Also, when I open the Code Snippets window, it is empty, no matter what image or frame I've selected. Do I need to import code snippets from somewhere or am I simply going about things the wrong way? Any help is greatly appreciated!
It all depends whether you're decisively using AS2.0 or AS3.0 .
In the latter, you would need to use a URLRequest() method in conjunction with a navigateToUrl() call (not sure the exact syntax for navigate to Url, it might be a capitalized "URL" in the method but the request takes a String argument such as http://www.adobe.com) -
Need Help Adding Flash Intro To Existing Site
OK I'm helping a buddy of mine out and he's already got his sie built for him by someone else, the index file is .php. Now I've got this little Flash animation that we want to run first, then when it's done go to his website. When I try to add it to the top of the index page all that happens is the site loads like in normally did but with the Flash movie at the top instead of being another page. What do we need to do to have it load on it's own first?
yes. the index.html should embed your flash intro swf and at the end to your swf (and in a skip intro button code) you should open the current main page (using getURL or navigateToURL).
-
Need help adding AM/PM to my clock program
Hi everyone
I would be grateful if you could help me adding AM/PM to my clockDisplay program, been trying but i'm not very familiar with Java.
Thanks
I have used 2 classes:
NumberDisplay and ClockDisplay
the clock automatically convert hours after 12 noon such as 14:34 to 02:34 so all i need is to add PM and AM accordingly.
NumberDisplay classs:
public class NumberDisplay
private int limit;
private int value;
public NumberDisplay(int rollOverLimit)
limit = rollOverLimit;
value = 0;
public int getValue()
return value;
public String getDisplayValue()
if(value < 10)
return "0" + value;
else
return "" + value;
public void setValue(int replacementValue)
if((replacementValue >= 0) && (replacementValue < limit))
value = replacementValue;
else if ( (replacementValue>=limit) && (replacementValue>=0) )
value=replacementValue-12;
public void increment()
value = (value + 1) % limit;
}ClockDisplay class:
public class ClockDisplay
private NumberDisplay hours;
private NumberDisplay minutes;
private String displayString; // simulates the actual display
public ClockDisplay()
hours = new NumberDisplay(12);
minutes = new NumberDisplay(60);
updateDisplay();
public ClockDisplay(int hour, int minute)
hours = new NumberDisplay(12);
minutes = new NumberDisplay(60);
setTime(hour, minute);
public void timeTick()
minutes.increment();
if(minutes.getValue() == 0) {
hours.increment();
updateDisplay();
public void setTime(int hour, int minute)
hours.setValue(hour);
minutes.setValue(minute);
updateDisplay();
public String getTime()
return displayString;
private void updateDisplay()
displayString = hours.getDisplayValue() + ":" +
minutes.getDisplayValue();
}As you see value=replacementValue-12; do the job.
i tried do this:
if(hours.setValue(hour)>=12)
updateDisplayPm();
else
updateDisplay();
and for
private void updateDisplayPm()
displayString = hours.getDisplayValue() + ":" +
minutes.getDisplayValue() + "PM";but it didnt work.
so should iwrite if statemnt in NumberDisplay class and refer it to ClockDisplay or i can do something in clockDisplay.
Looking forward to hear from you
thankssolved
public class NumberDisplay
private int limit;
private int value;
private boolean isam;
public NumberDisplay(int rollOverLimit)
limit = rollOverLimit;
value = 0;
public int getValue()
return value;
public boolean getAm()
return isam;
public String getDisplayValue()
if(value < 10)
return "0" + value;
else
return "" + value;
public void setValue(int replacementValue)
if((replacementValue >= 0) && (replacementValue < limit))
value = replacementValue;
isam=true;
else if ( (replacementValue>=limit) && (replacementValue>=0) )
value=replacementValue-12;
isam=false;
public void increment()
value = (value + 1) % limit;
public class ClockDisplay
private NumberDisplay hours;
private NumberDisplay minutes;
private String displayString; // simulates the actual display
private NumberDisplay amCheck;
public ClockDisplay()
hours = new NumberDisplay(12);
minutes = new NumberDisplay(60);
updateDisplay();
public ClockDisplay(int hour, int minute)
hours = new NumberDisplay(12);
minutes = new NumberDisplay(60);
setTime(hour, minute);
public void timeTick()
minutes.increment();
if(minutes.getValue() == 0) {
hours.increment();
updateDisplay();
public void setTime(int hour, int minute)
hours.setValue(hour);
minutes.setValue(minute);
updateDisplay();
public String getTime()
return displayString;
private void updateDisplay()
if(hours.getAm())
displayString = hours.getDisplayValue() + ":" + minutes.getDisplayValue() + "AM";
else
displayString = hours.getDisplayValue() + ":" + minutes.getDisplayValue() + " PM";
} -
Need help adding audio to a slideshow in iDVD. I don't see my playlists.
I'm a relatively new Mac user & am trying to create my first DVD ever. I'm just learning as I go. I'm trying to create a slideshow with about 400 pictures to show at a "Going Away" Party. I've created a playlist to go along with it, but when I click on Audio & then on iTunes, it pulls up all of my songs in my whole library, but doesn't show my playlists anywhere. When I click on "help" it tells me that I should be able to go to Audio, click on iTunes, click on "library", & then find my playlist. However, I don't see "library" under iTunes. Help!
+but is it possible to make many different slideshows on the DVD but somehow have it play automatically from one to the other+
No. You can do that in DVD Studio Pro.
Here's a couple of examples of how I did these projects a couple of years ago:
*Mediterranean 2003 cruise*
I had over 1000 images from a Mediterranean cruise. I broke them down in to 24 Albums in iPhoto (fewer than 99 images each). In iDVD, I created 6 Folders which created sub-menus. Main Menu buttons (folders/slideshows) such as Barcelona, French Riviera, Florence, Rome, Naples, Malta. Then I added each of the corresponding 24 iPhoto Albums to those 6 slideshows, thereby creating 24 total slideshows on sub-menus. Takes some planning. All slideshows had transitions and music.
*Ireland 2004 iDVD Project*
Nearly 800 images dragged into iDVD as organized folders from the hard drive. Transitions on each image, and menus, sub-menus, and sub-sub menus. The sub-menus are created by clicking on the Folder icon on the iDVD interface.
Main Menu has 6 buttons: Downpatrick, Antrim Coast, Letterkenny, Sligo, Trim, and Extras. Behind each button are additional buttons ranging from 3 to 6 buttons. The Extras button goes fairly deep. When you click on Extras, it gives you 3 choices on a new menu. The "B&Bs" button opens a new menu with 5 buttons. The "Movies" button opens a new menu with 4 buttons. If you click on the "Irish Music" button, you open a new menu with 2 buttons. At that point, you are at a "sub-sub-sub menu."
Music was on most of the slideshows. Some movies converted to QT DV from Canon S400 digicam .AVI files (iDVD 4). Now convert to H.264 with QuickTime 7. Images are original 4MP (2MB) JPEG images from the same digicam. This DVD project is around 4GB with all pictures as DVD-ROM content. -
Need Help Adding Music to Slide Show - PS Elements 11
I am using PS Elements 11 to create a slide show. The photos and transitions are complete. But when I try to add music in an mp3 format, the songs are there but the text for the songs does not appear in the bar below the photos in the slide show review mode. All I can see is a fuzzy gray line. I need to see the text for the songs so I can trim and reorder the songs. I have tried to create a new slide show with new music but the music area is also fuzzy. Texts appeared one time but no longer. Please help! Need for Wed.!!!!
Welcome to the forum.
As Mylenium points out, this is not the Photoshop Elements Forum.
I will Move your post to the PSElements Forum, where you will get the answers to your question.
Good luck,
Hunt -
Need Help Converting movie files!!!!
I created a 66mb movie in IMovie 08 that I need to save and convert to be less than 50mb and be view by Windows Media Player. Any help will be greatly appreciated.
Amyhttp://www.flip4mac.com/wmv.htm
You'll have to buy the $50 version to convert to WMV, unfortunately.
Maybe you are looking for
-
Opportunity Product reporting with # of Periods and Frequency
We are just about to roll out out a business unit and they will be using the frequency, number of periods, and the start/close date fields on the revenue record. In staging, I created a test report and it 'explodes' the product to have 12 individual
-
New rMBP 13" - Trackpad/Keyboard not working during Win7 Bootcamp Installation
Hi, I bought the new rMBP 13" 2 weeks ago and now wanted to install Win7 on an extra partition. Using the Bootcamp Assistant, I created a bootable USB drive to install. However, when booting the USB drive and getting to the first installation screen
-
How to export contacts, calendar, notes from outlook 2013 for mac to out 2013 PC
I have been unsucessful with syncing my iPhone5 and iPad Air (both are iOS7). My MS Outllok 2013 is installed on my iMac (Maverick). My iMac is dualt booted with Windows 7 and Maverick operating systems. I visited my local Apple store and was told
-
Color not consistent for Line Chart and Legend for prev and curryr
Hi I am trying to pull last year and current year data in line chart with different color coding. I have multiple parameters selection on single chart. For some it reflects the color properly and for others it interchanges the color. Crystal xI R2..
-
I'm getting an error code 30 when trying to print an email attachment. How can I fix this?
The dialog box says "Printer not activated, error code -30"