Need help adding music to Zen Nano P

I just purchased it a few days ago. Initially, I downloaded 30 songs. When I tried to add more music a day later, it didn't happen. The player still said I was at 30 songs, although when I clicked on check the device,all the music is there. So where was it on the player?I ended up deleting all, and starting again... I downloaded all of the music together. It's on the player.But once it's downloaded, I can't add to it. What am I doing wrong?My cheap,little?Sansa Disk was so much easier, lol. Any help would be appreciated. Thanks.

Welcome to the forum.
As Mylenium points out, this is not the Photoshop Elements Forum.
I will Move your post to the PSElements Forum, where you will get the answers to your question.
Good luck,
Hunt

Similar Messages

Need help moving music from iPod nano to new computer

I had a computer that had all of my music on it, it was a combination of music I purchased from iTunes, purchased from other places, and that had been transferred from my CDs. That computer died, and the music was lost. My CDs are in storage and I can't put my hands on them easily. All of that music was on my iPod Nano, but when I plug it in it only gives me the option to erase and sync, and I don't want to lose what's on my iPod but I would like to add new music that I've added to iTunes on my new computer to the iPod. Is this even possible?

it 's possible you just have to change your sync option from automatic to manual
the way to do this is the do the following
-open iTunes while ipod is connected
-if you get the message to erase and sync just click cancel
-on the left hand side of the iTunes window click on your device in the devices section
-in the ipod summary page go to the bottom of the page and choose "manually manage music"
-click apply and now any new music you want to sync you just drag the music from the library section and drop it onto the ipod in the devices section in iTunes
hope this helps:)
ps: this is only a temp fix but if you want something more then just a work around just post back

Need Help Adding Music to Slide Show - PS Elements 11

I am using PS Elements 11 to create a slide show. The photos and transitions are complete. But when I try to add music in an mp3 format, the songs are there but the text for the songs does not appear in the bar below the photos in the slide show review mode. All I can see is a fuzzy gray line. I need to see the text for the songs so I can trim and reorder the songs. I have tried to create a new slide show with new music but the music area is also fuzzy. Texts appeared one time but no longer. Please help! Need for Wed.!!!!

Welcome to the forum.
As Mylenium points out, this is not the Photoshop Elements Forum.
I will Move your post to the PSElements Forum, where you will get the answers to your question.
Good luck,
Hunt

Need help adding music to my phone. music shows up on my phone in itunes but is grayed out and looks like it is syncing., need help adding music to my phone. music shows up on my phone in itunes but is grayed out and looks like it is syncing.

so i restored my phone because it had quit playing any sound out of the speaker. now after trying to re-add my music now of it will go on. i have tried syncing it and manually adding it, neither one works. nothing shows up on my phone under music, but in itunes when i drag music on it goes to puts them in the transfer stage (grey with the circle arrows) and they just stay like that never going on my phone

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Need help adding music to Imovie.

I've been working on a slide show in Imovie and importing music I've purchased at Itunes. I find some of the songs need to be shortened to work with the amount of pictures I have. What I did was purchase a song at Itunes, burned this song to a CD, then saved it back to my hard disk to work on it in Jasmine- an audio editing program. I was told this was the way to do it in the Itunes discussion group. When I save it out of Jasmine after shortening it, I saved it as an AIFF file. I then tried to bring it into Imovie, but the program doesn't seem to allow me to do it. Am I going about this all wrong? Is the a simpler way to do this?
Dick Skover

Hi!
Jasmine- an audio editing program. I was told this was the way to do it in the Itunes discussion group.
I am sure that everyone in the itunes discussion group gives very good advice. However, have you tried simply importing the burned song to imovie and
i then
editing it by splitting and deleting or by direct trimming?
Sue

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

*** Need help recovering music on iPod/iTunes ***

* Need help recovering music on iPod/iTunes *
I bought my iPod 30G when it first came out back in the day. With the protective case it looks like a Walkman, if you know what that is. The new ones are half the thickness of my old skool one. lol!
Anyway, years ago I accidently uploaded a virus in both my PC and laptop. Yeah, real *******. Well, the person who restored my computers couldn't save my music. I still have the iPod but my library on iTunes is gone. If I try to update my iPod in either computer it will erase every song I have on it and only upload the songs/album I'm trying to add. I'm told that this is something Apple did to prevent file sharing, blah, blah, blah...
Does anyone know a way around it? I keep buying CDs just not able to load them into my iPod thru iTunes.

Hello yourantihero,
And welcome to Apple Discussions!
There are several ways you can pull the music off your iPod and onto iTunes. The first link below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple Google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
[5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
Here are a few more helpful sites.
[Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer]
Or
[How to copy songs your iPod to your PC|http://lifehacker.com/software/ipod/how-to-copy-songs-from-your-ipod-to-your -pc-105256.php]
Also, here is an article for the direct method that is for both Windows Vista and XP.
http://ipodtips-tricks.blogspot.com/2008/10/howto-transfer-music-from-ipodto-itu nes.html
Hope this helps.
B-rock

Yikes! I need HELP RE: connecting my iPod Nano!

I just bought a 4G iPod Nano TODAY. I'm kind of "electronically challenged." So I plugged my Nano into my computer, using the very brief instructions that were provided with my Nano. My songs loaded fine, but when I removed the Nano from my computer, I could not get the USB cord out of my Nano. Of course, like a *******, I pulled and pulled and pulled, until the wires started coming out of the connection. Then I really started freaking out! Got out my pliers, and finally was able to remove the connector. However, in doing so, I have now done something so that a new connector won't go in. I realized AFTER I had done all of this that I needed to press on the two sides of the connection in order to get it out of the Nano. Does anyone know if Apple will fix this? I am going to cry if this can't be fixed. Please let me know ASAP. I don't think I can sleep until I find out. Thanks for your help.

this falls into the category of abuse, so no, i don't believe apple will fix it. i would try buying a new cord first, see if that helps. unless it is the nano's connector that is messed up, then you are SOL.

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

Record line in music with Zen Nano 51

how can we record the music with line in?
which line in?
can we use earphone jack as line in?

It's the Zen Nano Plus that has a line in port. It would be on the bottom of the player (opposite end from the headphone jack), next to the USB port and have Line-In written next to it.
There's menu options to recording using it on the player.

Need Help With Videos on Zen V P

I need help putting videos on my Creative Zen V Plus. I convert them to avi using Super Converter and I drag and drop them into the folder for the videos on my zen. When I turn on my Zen and go to the videos the video is there however when I try to play it it says video format not supported.

Original?Creative software after internet upgrades easy convert any video to Zen format and automaticaly transfere it to player.

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

ComboBox (dropdown) Need Help Adding URL links!!!

I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,

Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful.

I have recently bought a zen touch (20gb) and need help putting music on

I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.

You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.

Need help adding music to Zen Nano P

Similar Messages

Maybe you are looking for