Need help adding numbers to PDF drawing and more

I'm not an Adobe superuser so hopefully this isn't a stupid question. I receive drawings in PDF from my clients. The drawings look like Autocad and are pictures of parts with dimensions that I build for them. I number all the dimensions on the PDF drawing from 1 to whatever. I then create a spreadsheet with the numbers and the corresponding dimension plus other info. Currently I print the PDF then with a pen I manually number each dimension. Then I manually enter the dimension and special symbols in my spreadsheet. Ideally I'm trying to find a way to just click and have it enter a 1 then click and have it enter a 2 etc. If that's not possible then what's the easiest way to just click and allow me to type 1 then click and I type 2 etc.
Thanks in advance,
Mark

I think what you actually need is a dynamic stamp. Try searching these forums and also acrobatusers.com . There's a lot of information about it.

Similar Messages

Need help adding footer to PDF

I have Adobe Acrobat XI and I am trying to add a footer to a PDF, but I only receive a pop up message: You do not have sufficient permissions to perform this task. Please help!!

I think what you actually need is a dynamic stamp. Try searching these forums and also acrobatusers.com . There's a lot of information about it.

Needs help adding images to movie clips and referencing the frames

i havent started with a blank, script made movie clip.
I want to add frames from action script 2, and be able to
reference/show the induividual frames for a video game and not a
movie. I dont realy need animation, i just need certain frames to
show, that i want to load load(from a non script made movie clip
with one loaded frame(bitmap data).

you can't add frames to a movieclip using actionscript. so,
if that's what you're trying to do you'll need to find some other
way to accomplish your goal.

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

привет Roman,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Mac OS X: О сброса системы Печать ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 инструкции ...
В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
http://www.macosxhints.com/article.php?story=20031215144430486
Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
Сброс системы печати в Mac OS X 10.5.x + + +
1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
2. Выберите Системные настройки в меню Apple.
3. Выбери для печати и факса в меню Вид.
4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
http://support.apple.com/kb/ht1341
Перезагрузку.

I need help in converting a pdf to a fillable form in my adobe

I need help in converting a pdf to a fillable form in my adobe

"Adobe" is a company. If you mean "Adobe Reader" then you can't (at least not easily). You need Adobe Acrobat for that.

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

Need help my window is in thai and i dont understand at all.how to convert to english?

need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.

Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far.

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!

Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

I need help viewing password protected PDF files on my tablet

I need help veiwing password protected PDF files on my tablet

Any free apps available especially for this purpose?
not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

More information about this game:
The game should generate a random obstacle course for the player. The first column of the grid, however, should consist of all empty pieces, with the exception of the upper left-hand corner, which is the grid location where the player initially resides.
Enter a loop in which the following things happen (not necessarily in this order):
Print the current board configuration. Additionally, a key should be printed describing what each piece is.
Get an action from the user. The player can move up, down, left, or right. Use the following controls: up = 'i', down = 'm', left = 'j', right = 'k'. The player can move at most one block at a time. Of course, if the player tries to move into a spot occupied by an immovable block, the player will not move.
Inform the player whether they have won, or if they have lost (a player loses if they step on a bomb piece).
If the player types 'q', the game should terminate.
I am still stuck on this maze generator stuff.... Please help me....

I need help opening up the pdf doc that i just saved. i need to open it up with excel?

I need help opening up the pdf doc that i just saved. i need to open it up with excel?

Yes, I need help configuring the settings.
Re: I need help opening up the pdf doc that i just saved. i need to
open it up with excel? created by David Kastendick<http://forums.adobe.com/people/dave_m_k>in
Adobe ExportPDF - View the full discussion<http://forums.adobe.com/message/4711293#4711293

Need help adding numbers to PDF drawing and more

Similar Messages

Maybe you are looking for