Need help adding ports to my router.

I have a Linksys WRT54GS Router. I am having an issue with Xbox Live and I was told by Xbox customer support to add the ports UDP 88, UDP 3674, and TCP 3074. The problem is is that I have no idea how to do this. I am at the Applications & Gaming tab of the Router page (192.168.1.1), I just don't know where to put the numbers. Any help is greatly appreciated.

First, setup up a static IP address on the XBOX. I can't tell you how to do that. Check the manual. Currently the XBOX is probably on "automatic IP address" or "DHCP" or whatever they have called it. Set up a static IP address and use these numbers on the XBOX:
IP Address 192.168.1.50
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DNS 192.168.1.1
If the XBOX has some Status pages to check the current IP address verify that you have those values after the change. Also verify you have a working internet connection on the XBOX.
Now the port forwarding. I assume it looks something like this demo UI. For port UDP 88 enter
Application udp88
Start 88
End 88
Protocol UDP
IP address 192.168.1.50
Enable SET
Do similar with all other ports. The application name is only a descriptive text for you. You can enter anything you like, but keep it short and simple and don't use special characters in the name. The above "udp88" is O.K.
Don't forget to save the settings at the end.

Similar Messages

Need help adding 2nd laptop to router WRT160N

I need to add another laptop to our home network so it can connect to our internet connection. The 2nd laptop shows our home network as an available network connection, however, when I try to connect and enter in the key, the computer gives me a message "please wait while windows connects to the xxxxxx network- waiting for the network" This message stays for approximately 45 seconds then disappears, leaving me at the wireless network connection screen. I have confirmed the network key is correct.
I can connect to the internet if I choose an unsecure connection so I am wondering what other items I need to configure.
Any help would be greatly appreciated.
Thanks!

Yes, those sound like they should be compatible security modes.
What I'd suggest is to reboot your second laptop and power-cycle the router, see if that helps you to be able to connect both laptops.
If that doesn't help, then write down any configuration data that you'll need to re-enter after resetting the router. There's a recessed reset switch on the back of your router, hold that in for about 30 seconds and release it. This will set the router back to factory defaults, so you'll need to re-enter your configuration data using the router web GUI. Then try again to reconnect with both laptops, and see what happens. Please post the results from trying these.

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Error: "Could not sign in. Please check your network connections and try again", regardless of which Apple ID used. Do I need to open ports on the router?

Attempting to log into FaceTime on iMac and get this error Could not sign in. I have tried multiple Apple IDs and checked that connection to internet is working as normal. Do I need to open certain ports on the router to allow a Facetime connection with iMac.
I am able to connect FaceTime with iPhone over wifi. iMac is connected via etehrnet cable to router.

I have the same problem with my MacBook Pro I have it connected to WiFi

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

Need help to set wireless Linksys Router WRT150N to work with Nettalk Duo

I have Linksys Router WRT150N , connect to it Nettalk Duo but there is no ring tone, the orange light is flashing trying to connect, then i have the green light blinking then go Red.
I thied to call Nettalk but no answer to their phone, chat with customer support at last they said someone from technical support will call back, but that not happen since two weeks.
I make several tickets to them but no reply, service is very bad.
Please any help to configer inside the router to recognise Nettalk, i have cable internet they said there is no blockage from there side.

Hey sam63. Based from what I've read, RED lights means the device has failed to connect to the network. I'd suggest that you perform a powercycle. Unplug the power of the NetTalk Duo and the router for 30 seconds. Once done, power on the NetTalk first then, the router. Also, make sure that it is properly connected to the router's Ethernet port and the router is working online. You may try using another Ethernet cord or plug it into another Ethernet port.
If that won't work still, I found a link that might help you. Here: http://www.nettalk.com/support/customer-support/
Help, learn and share

Need Help with Packet Loss and routing Loop perhaps???

Hi,
I am running into a very odd situation. One of our highly critical systems (172.18.1.2/16) is losing connection intermittently for brief periods of time (1minute, 3 minute, 50 seconds and so on).
I have gathered some information that I would like to share with you guys:
The switch is a 3560 (Show version is in ShowVersion.txt)
default gateway is 172.18.10.254/16 (virtual IP in an HSRP , packet capture is done on the active node)
I have noticed that pings to one of the default gateways drop infrequently (more frequently from machines on 172.18.0.0/16) segment.
total number of machines on 172.18.0.0/16 do not exceed 200
I have captured packets on Interface Vlan1 and I found something very weird, perhaps pointing to a routing loop??? (see capture.png) The ICMP request comes and hits the 172.18.10.254 with TTL of 128 TWICE! then packet capture shows that same packet with TTL decremented by one TWICE! again and again until it reaches TTL of 1 and then it responds with a reply.
At times it completely ignores the requests and causes a request timed out.
I am confused and need help in right direction. I really appreciate it.
can you also confirm if the multiple packets mean routing loop somewhere?
Thanks

Could you post a copy of your HRSP config and the results of a #show standby?
Thanks

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

ComboBox (dropdown) Need Help Adding URL links!!!

I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,

Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful.

Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room

My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.

Hi ,
I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network.
The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x.
The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch.
With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
Hope this helps.
-ATTU-verseCare

Need help with port mapping on Airport Utility 6.1

Ive been trying to port map on my TC with Airport Utility 6.1 and failing miserably. Port still closed. Can anyone advise where Im going wrong? Am trying to set up my home camera to be viewed outside.
I managed to key in the ports etc under Network and Port Settings. But nothing works. I'm tearing my hair out.
Any suggestions to try would be helpful.
Thanks

Use the 5.6 utility.. it is much easier and I think works better.. although you cannot load 5.6 directly into 10.8 the version for Lion actually works fine.
Download 5.6.
http://support.apple.com/kb/DL1482
Download unpkg
http://www.macupdate.com/app/mac/16357/unpkg
Open the AU 5.6 dmg and drag the pkg over the open unpkg.. it will create the directory on the desktop. You can either run it from there or drag the utility to your utilties directory.
Take screen shots of each step. Post them here.
That way we can tell you where it has gone wrong.
What port exactly does the camera need open?
How are you connecting remotely?
ie do you have a fixed public IP?? If not how are you getting IP?
Is the TC the only router in the network.. it is irrelevant unless the TC is the one and only router.

Need help identifying ports needed to access a website.

I am trying to access the following site:
Interactive mapping | City of Lawrence, Kansas
At the bottom of the page is a button that states "I agree with the above disclaimer".
When I press that button, I am redirected to this site:
http://ims03.ci.lawrence.ks.us:10002/iisstart.htm
I have added these rules:
Source Interface: All
Destination Interface: Public Interface
Packet Type: MapSite Out
Protocol: TCP
Source Port: 1024-65535
Destination Port: 10002
Source Address: All
Destination Address: 208.191.35.52
Source Interface: All
Destination Interface: Public Interface
Packet Type: MapSite In
Protocol: TCP
Source Port: 10002
Destination Port: 1024-65535
Source Address: 208.191.35.52
Destination Address: All
I get a "Loading the viewer" text message, but then eventually get a 504 Gateway TimeOut error.
If I drop the BorderManager Firewall...
unload ipflt
unload ipxflt
unload filtserv
then the site works just fine.
I just can't seem to get the filter exceptions correct for this site.
Any help would be appreciated.

In article <[email protected]>, Cadd wrote:
> Source Interface: All
> Destination Interface: Public Interface
> Packet Type: MapSite Out
> Protocol: TCP
> Source Port: 1024-65535
> Destination Port: 10002
> Source Address: All
> Destination Address: 208.191.35.52
>
This looks good. TCP packets with dest. Port 10002 will be allowed to
pass through BM only if they go from the private to the public
interface, and only if they are addressed to 208.191.35.52. So far so
good, but since you made this non-stateful, you have to add a return
exception. (Easier for you to make another exception, like '10002-st'
and just enable the stateful feature on it).
Your goal in the next exception is to allow the replies to these
outbound packets. Everything will be reversed in the exception for the
replies - interfaces, ports and addresses.
> Source Interface: All
> Destination Interface: Public Interface
> Packet Type: MapSite In
> Protocol: TCP
> Source Port: 10002
> Destination Port: 1024-65535
> Source Address: 208.191.35.52
> Destination Address: All
>
This one is the problem. It only allows the 10002 replies (source
port) from 208.191.35.52 if the reply is passing through the public
interface second. You did not reverse the interfaces. The packet
needs to go from public to private (or public to all if you have more
than one private interface). This exception is not allowing the return
in, which you would see if you have filter debug enabled looking at tcp
discards. You would see ACK packets with source port 10002 being
discarded.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Need Help for configuring Floating static route in My ASA.

Hi All,
I need your support for doing a floating static route in My ASA.
I have tried this last time but i was not able to make it. But this time i have to Finish it.
Please find our network Diagram and configuration of ASA
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1 track 1
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1
route rOutside 0.0.0.0 0.0.0.0 3.3.3.3 10
route inside 10.10.4.0 255.255.255.0 10.10.3.1 1
route inside 10.10.8.0 255.255.255.0 10.10.3.1 1
route inside 10.10.9.0 255.255.255.0 10.10.3.1 1
route inside 10.10.15.0 255.255.255.0 10.10.3.1 1
route rOutside x.x.x.x 255.255.255.255 5.5.5.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.3.77 255.255.255.255 inside
http 10.10.8.157 255.255.255.255 inside
http 10.10.3.59 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 123
type echo protocol ipIcmpEcho 8.8.8.8 interface outside
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
crypto ipsec transform-set cpa esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map vpn_cpa 1 match address acl_cpavpn
crypto map vpn_cpa 1 set peer a.a.a.a
crypto map vpn_cpa 1 set transform-set abc
crypto map vpn_cpa 1 set security-association lifetime seconds 3600
crypto map vpn_cpa interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
track 1 rtr 123 reachability
telnet 10.10.3.77 255.255.255.255 inside
telnet 10.10.8.157 255.255.255.255 inside
telnet 10.10.3.61 255.255.255.255 inside
telnet timeout 500
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 10.10.3.14
webvpn
tunnel-group .a.a.a.a ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
smtp-server 10.10.5.11
prompt hostname context
Cryptochecksum:eea6e7b6efe5d1a180439658c3912942
: end
i think half of the configuration stil there in the ASA.
Diagram.
Thanks
Roopesh

You have missed the last command in your configuration, Please check it again
route ISP1 0.0.0.0 0.0.0.0 6.6.6.6 track 1
route ISP2 0.0.0.0 0.0.0.0 3.3.3.3
sla monitor 10
type echo protocol ipIcmpEcho 8.8.8.8 interface ISP1
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability
You can do NAT in same way, here the logical name of the interface will be different.
Share the result
Please rate any helpful posts.

Need help on the WRT54G wireless router!

Hello all! I need your help guys! I have a Linksys Wireless router WRT54G V4 and it was working fine till yesterday when a power drop happen in my neighborhood. I notice that my router was alright but when I tried going online it didn't work. So I resetted my router and ran the CD for all the steps and now it keeps reading that it can't pick up on my At&T DSL Modem. It keeps stating that I should see if it's on, which it is, and if not then try to turn it off then back on. Well, I've tried that and no luck!
My next step was to go the the router's setup page and do the setup through there. Ok, so, I've done everything right but when you go to the Status section of the page and push connect it reads that my PPoEp, or how ever it's spelled, has failed. In troubleshooting, I checked to see if my modem was bad so I connected the internet directly to my computer without the router and the modem works fine.
So there you have guys. What do you think is wrong or what should I do!? My 3 Year warranty has expired on this router and I'm not about to cough up $25-$29 dollars for tech support from Linksys. The router is still good. Every thing lights up and is in good shape.
My guess is that the port where the internet is connected on the router may be a bad port.
Suggestions!?

You can try these settings
Open reouters set up page ,under internet connection type use "automatic configuration DHCP",click on save settings.
Click on "mac clone" sub tab ,enable the service click "clone my pcs mac" & click save settings .
Now under status tab check the internet Ip address ,if you are getting public Ip ,then try going online .
If Ip is 192.168.1.x ,then under set up change the Local Ip address to 192.168.2.1. save the settings & power cycle for 1 min .
Then again try going online.
If Ip is 0.0.0.0,then use PPPOE under internet connection type & enter username & password provided by your
ISP .click on connect under status tab.If getting a valid Ip address try going online OR
Let me know the exact error message on status tab after clicking connect .

Need help adding ports to my router.

Similar Messages

Maybe you are looking for