Need help adding services to clusrter

I'm trying to add two new services to an existing 2 node 11Gr2 RAC cluster. I want to use them for application partitioning. I want some apps to always connect to node 1 and others to always connect to node 2, unless a node is down in which case I want them all to go to the surviving node.
I added both new service names to both instances with - ALTER SYSTEM SET SERVICE_NAMES ='...,service1,service2' scope=both sid='*';
I created 2 new service names with - srvctl add service -d dbname -s servicename -r "InstName1" -a "InstName2". For the 2nd new service I reversed preferredInstName and otherInstName.
I enabled the services with - srvctl enable service -d dbname -s "service1,service2".
I started the services with - srvctl start service -d dbname -s "service1,service2".
I tested the new service names with - sqlplus user/password@scanName:1521/serviceN (where N is 1 or 2).
My problem is that it's not always connecting me to the preferred instance. Sometimes it does and sometimes it doesn't. What did I do wrong?
I also noticed that if I run - srvctl status service -d dbname - it does not contain the last line that I usually see which says "Service is enabled on instances:"
If I run - srvctl status service -d dbname -s service1 - it only shows it running on one instance (the preferred one). Sam thing with service2.

In addition to not adding the services with ALTER SYSTEM you should also try lsnrctl status on all your scan listeners to check if the service gets registered against all listeners correctly
bjoern

Similar Messages

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

ComboBox (dropdown) Need Help Adding URL links!!!

I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,

Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful.

Need help adding video to a site

Hi Everyone:
I really need some help please. The owner of a site I am
working on sent me a DVD with video's he has taken and wants them
put on his site.
The files are VIDEO_TS and are MPEG files. How can I add the
video's to the site so that when I user clicks on the link, they
are able to either view the site or download the video to watch
later. I have other video's added to the site but I was able to
copy them and safe them the way there were added. The owner sells
products from the site I copied them from.
The site I am working on is www.buggyworld.net. Most of the
individual pages for the vehilces have videos on them and I am
trying to add these new ones the same way. I have never done this
before so really not sure how to. The videos that are already added
at Windows Media Audio/Video Files and that is how I would like to
convert this video to.
Any help would be so greatly appreciated.. thank you
Linda

Best bet would be to make Flash video so that everyone who
wants to (and has
the Flash Player plugin) can see them. Do you have Flash?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Frank Branker" <[email protected]> wrote in
message
news:f4ph73$rcd$[email protected]..
> What?s the size of your MPG file?
>
> It?s better if you convert your file to a wmv file
format because it?s
> important to keep your file size under 6 Megs. Do you
have the software to
> do
> this?
> Windows Movie maker might be able to do this you can
find it in your
> program
> files on your computer.
>
> If not we will have to work with what you have and do a
quick and dirty
> but I
> don?t advise that.
>
> Below is a list of tools you may want to consider
owning.
>
> Ripping Software
> This software will rip from a dvd to just about any
format including WMV
>
http://www.imtoo.com/dvd-ripper.html
>
> Compressing software
> Sorenson Squeeze Suite 4.5 is the industry-leading video
encoding tool
>
http://www.sorensonmedia.com/pages/?pageID=2
>
>
>

Need help adding AM/PM to my clock program

Hi everyone
I would be grateful if you could help me adding AM/PM to my clockDisplay program, been trying but i'm not very familiar with Java.
Thanks
I have used 2 classes:
NumberDisplay and ClockDisplay
the clock automatically convert hours after 12 noon such as 14:34 to 02:34 so all i need is to add PM and AM accordingly.
NumberDisplay classs:
public class NumberDisplay
 private int limit;
 private int value;
 public NumberDisplay(int rollOverLimit)
 limit = rollOverLimit;
 value = 0;
 public int getValue()
 return value;
 public String getDisplayValue()
 if(value < 10)
 return "0" + value;
 else
 return "" + value;
 public void setValue(int replacementValue)
 if((replacementValue >= 0) && (replacementValue < limit))
 value = replacementValue;
 else if ( (replacementValue>=limit) && (replacementValue>=0) )
 value=replacementValue-12;
 public void increment()
 value = (value + 1) % limit;
}ClockDisplay class:
public class ClockDisplay
 private NumberDisplay hours;
 private NumberDisplay minutes;
 private String displayString; // simulates the actual display
 public ClockDisplay()
 hours = new NumberDisplay(12);
 minutes = new NumberDisplay(60);
 updateDisplay();
 public ClockDisplay(int hour, int minute)
 hours = new NumberDisplay(12);
 minutes = new NumberDisplay(60);
 setTime(hour, minute);
 public void timeTick()
 minutes.increment();
 if(minutes.getValue() == 0) {
 hours.increment();
 updateDisplay();
 public void setTime(int hour, int minute)
 hours.setValue(hour);
 minutes.setValue(minute);
 updateDisplay();
 public String getTime()
 return displayString;
 private void updateDisplay()
 displayString = hours.getDisplayValue() + ":" +
 minutes.getDisplayValue();
}As you see value=replacementValue-12; do the job.
i tried do this:
if(hours.setValue(hour)>=12)
updateDisplayPm();
else
updateDisplay();
and for
private void updateDisplayPm()
displayString = hours.getDisplayValue() + ":" +
 minutes.getDisplayValue() + "PM";but it didnt work.
so should iwrite if statemnt in NumberDisplay class and refer it to ClockDisplay or i can do something in clockDisplay.
Looking forward to hear from you
thanks

solved
public class NumberDisplay
 private int limit;
 private int value;
 private boolean isam;
 public NumberDisplay(int rollOverLimit)
 limit = rollOverLimit;
 value = 0;
 public int getValue()
 return value;
 public boolean getAm()
 return isam;
 public String getDisplayValue()
 if(value < 10)
 return "0" + value;
 else
 return "" + value;
 public void setValue(int replacementValue)
 if((replacementValue >= 0) && (replacementValue < limit))
 value = replacementValue;
 isam=true;
 else if ( (replacementValue>=limit) && (replacementValue>=0) )
 value=replacementValue-12;
 isam=false;
 public void increment()
 value = (value + 1) % limit;
public class ClockDisplay
 private NumberDisplay hours;
 private NumberDisplay minutes;
 private String displayString; // simulates the actual display
 private NumberDisplay amCheck;
 public ClockDisplay()
 hours = new NumberDisplay(12);
 minutes = new NumberDisplay(60);
 updateDisplay();
 public ClockDisplay(int hour, int minute)
 hours = new NumberDisplay(12);
 minutes = new NumberDisplay(60);
 setTime(hour, minute);
 public void timeTick()
 minutes.increment();
 if(minutes.getValue() == 0) {
 hours.increment();
 updateDisplay();
 public void setTime(int hour, int minute)
 hours.setValue(hour);
 minutes.setValue(minute);
 updateDisplay();
 public String getTime()
 return displayString;
 private void updateDisplay()
 if(hours.getAm())
 displayString = hours.getDisplayValue() + ":" + minutes.getDisplayValue() + "AM";
 else
 displayString = hours.getDisplayValue() + ":" + minutes.getDisplayValue() + " PM";
}

Need help adding device to Canon ELPH 320 HS

I just bought a Canon ELPH 320 HS. I am having trouble adding my laptop as a device. I have Windows 8, and I downloaded what I thought was the windows 8 compatible version of Canon Picture Window. All of the settings in my control panel seem to be correct as far as media sharing, etc.
Here are the steps I've been taking. Please tell me if I'm doing something wrong.
I touch the internet icon
Then the computer icon
Click Add a device
Our wireless connection shows up, so I select that, I enter our network password and
then my laptop shows up and I select that.
And at this point it says connected to Kelly's Laptop, and has that spinning circle. It takes forever to connect. And then I get a communication error/connection failed error.
Please tell me what I'm doing wrong! Thanks!! The wifi was one of the main reasons why I bought this camera. It will be a huge disappointment if it doesn't work.

Hi kelly1010!
The instructions for setting this up also mention needing to make some changes to the Windows Firewall settings. Certain ICMP Inbound Echo Requests and UPnP services must be enabled. You mentioned you have been through the necessary Control Panel options already. Did you also enable these in the Windows Firewall settings?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I need help adding text!

I need some help with PE 12 and adding text...

this forum is for photoshop elements and photoshop elements doesn't support editing GIF.
You might want to post to photoshop community Photoshop General Discussion

Need help adding a second page on reports builder, paper layout.

Hi,
I have a requirement where I need to create a paper layout using Reports Builder (10.1.2.0.2). This report will print out the following:
1) Invoice
2) VAT Slip (on a separate page)
So far I have created the invoice part and it is printing properly. Now I want to add the Vat slip. When I use the "Trailer Section" on the rdf report, I create a frame and inserted some text. The report ran just fine. Then in the same frame, I added a repeating frame. And now the report is completing with the following error:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 86
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
*** glibc detected *** ora_rw20_run: munmap_chunk(): invalid pointer: 0x09067b10 ***
Anyone have any idea why this is happening? Any help is much appreciated.
Or is there any way I can add a page that has to be printed after the invoice?
Thanks
-Nelly

If you have created your own template (but it sounds like you haven't) you will need to 'capture' that page so it repeats on following pages.
The whole process is described here:
"Letterhead and follower sets"
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

Need help adding field data from a table to a text box

I have a form that has a table. Within the table is a description box. The user enters data into the box and can add/remove new items. When they are done I would like the text from these fields to be concatenated into a large text box. Essentially what they are doing is creating a list of descriptions that will be pushed into a report field.
Thanks,

Hi,
Yes, you should be able to adapt the example to work for the main summary textfield.
I would place the script in the exit event of the table textfields. You would still need to clear the summary textfield and then loop through the table and update.
Inside the loop the text would be like:
summary.rawValue = summary.rawValue + xfa.resolveNode("Table1.Row1[" + i + "]").textField.rawValue + " ";
Hope that helps,
Niall

Need help adding 2nd hard drive

Hey guys whats up. I need some advice about adding a second hard drive. Right now i have a WD 320GB 7200 RPM IDE Ultra ATA100 Hard Drive running on the primary IDE. Everything is fine but i wanted to get a smaller and faster drive for the operating system and for some small video editing. I recently purchaced a Western Digital Raptor 36.7GB 10,000 RPM Serial ATA150 Hard Drive.
Now the questions:
1. How should i assing the drives? (which master/slave/cable select)
2. Also am i going to have to do anything since im going to have one on the IDE and another on SATA?
3. Any advice that you have...
What i was thinking is this...i should disconect my current HD and hook up the new one to SATA port 2, and set it to master(or CS maybe). Format it and then install the operating system. Once OS installed and working, ill hook back up the IDE drive and make the setting to slave(or CS maybe). Then uninstall the operating system from the IDE.
Thanks for any input

Thanks NovJoe,
What setting (master/slave/cable select) should i set the IDE drive to? And yes i do want my OS on the raptor.
Thanks for your advice...didnt think that anyone was going to.

Need help adding image to datagrid column

Hi,
Can anyone tell me how to add an image to a datagrid column?
I have created a flex library project which contains a mxml component with a datagrid, an item renderer mxml component which rendered the image within the datagrid column depending on the value coming back from the database for that column and a folder 'assets' which hold all the images. When I add the library to my main project and call the mxml component with the datagrid an image place holder is visible in the datagrid column but not the image. However, if I take the image out of the library project and added to an 'assets' folder in the main project the image is displayed in the datagrid column.
It looks like, even though the images are in the flex library project and only the flex library project is trying to display the images in the datagrid, the library project is looking in the main application project folder for the image.
Does anyone know why this is happening and how to fix it?
Thanks in advance for an help,
Xander.

I have tried embedding the images in my library but it still didn't work. Also I can't embed the image as I'm using the value of the column to complete the image name, for example in my mxml item renderer component I have the added the following code
<mx:Image source="@Embed(source='assets/' + data.mycolumnvalue + '.png')" tooltip="{data.mycolumnvalue}"/>
but nothing is displayed.

I need help adding an additional button to a web template

Hello,
I am trying to add an aditional button to a web template I inherited. I am not a web person just trying to fill a gap at the company.
If you look at my test server www.pondviewtech.com I want to add another button above the request demo one. I have tried a bunch of things: making the button smaller, adding a similar line to my index file as the same button, deleting the "Welcome to" text. The best I could get was this www.pondviewtech.com/buttontest.html . I have attached my buttontest.html file. I couldn't figure out how to paste a few lines of code in this page.
I didn't create the template so if it is a mess don't worry about my feelings.
Thanks for any help or suggestions.

Change this -
 Welcome to Automated Compliance Solutions
 <a href="contactacs.htm"><img src="button.png" width="266" height="56" border="0" align="right" /></a>
to this -
 Welcome to Automated Compliance Solutions
 <a href="yourlink.htm"><img src="yourbutton.png" width="266" height="56" border="0" align="right" /></a>
 <a href="contactacs.htm"><img src="button.png" width="266" height="56" border="0" align="right" /></a>
Be aware that my suggestion here is NOT valid XHTML, but since you are not a web developer, and the 'invalid' markup that I have suggested will not affect the rendering or operation of the page, I decided to keep it simple for you. In my suggestion, "yourlink.html" refers to the page to which you want this button to link, and "yourbutton.png" refers to the filename of the button image (obviously you'd want to change this to correspond to the filename and extension of the image you have created).

Need help adding services to clusrter

Similar Messages

Maybe you are looking for