Need help adding wifi to a wired network with multiple hardwired ethernet

Hello all ,
I have a question that I can't seem to find the exact answer for and so I solicit your help.
I am renovating a large old farm which has 4 main buildings, arranged in a line that spans 150 feet in length. I had installed hardwire ethernet to each of the buildings all connected to an ethernet Gigabit switch which is connected top the adsl modem/router. What I wish to do is to connect a wireless access point/borne/or whatever is needed to the ethernet access point in each building giving me wireless capacity in each . My main access point is 100 feet or more from the farthest building and since this a farm dating from 1845 , and made of stone , a 100% wireless networks doesn't seem feasable.
Do I need to use aps? ethernet bridges? any suggestions are very welcome
Saxman

It sounds, based on your network description, that you should be able to set up a "roaming" network by inserting a 802.11n AirPort Extreme Base Station (AEBSn) in each of the farm buildings that are attached to the Ethernet backbone that you installed.
For more information about a roaming network see pages 40 - 41 in the following Apple document: Designing AirPort Networks Using AirPort Utility

Similar Messages

Need help adding 2nd AExpress to wireless network

hey peeps, i'm adding my second AE to my system, which contains a Macbook, a wireless DSL modem and another AExpress which is wireless and is connected to a stereo. I am having trouble connecting the 2nd AE to the system. Everytime i try to configure it it asks me if i want to switch networks, which i don't want to do. When i do that i lose my connection. I need to tie the new AE in to my current system.

Ok, let's double-check the 2nd AX's configuration to join the wireless network provided by the 2wire.
Temporarily connect AX to your Mac Pro using an Ethernet cable, and then, using the AirPort Utility check the following:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing 2wire's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

How to setup WiFi to a wired network?

Can anyone help me with what I need for setting up WiFi to a wired network. Do I need a wireless adapter?

See Chapter 18 in the iPod Touch Users Guide. It can be found here:
http://www.apple.com/support/ipodtouch/
If you are trying to create a Wi-Fi network you will need a wireless adapter. There is a wiki which can get you started located here:
http://www.wikihow.com/Create-a-Wireless-Network

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
Dan

Moving the discussion to OnLocation
Thanks,
Atul Saini

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.

Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?

Do you have Restrictions turned on?

Airport Express and wired network with static IPs

I have a wired network with static IPs. I have a block of free IPs I can use to connect to this network. Manually setting any of one IP from this block on my MacBook Pro via ethernet works great - full network connectivity including internet.
What I wish to do is add an Airport Express in between my MBP and the network, so that I may have greater freedom (wireless opposed to wired). Is the AX capable of this? If yes, what are the correct settings? Keep in mind there is no DHCP server on the network.
I have tried giving the AX an IP manually and then accessing it from the MBP having the AX share IP (effectively becoming it's own DHCP server?). This gives internet connectivity, but I can't see any of the servers on the network. I assume because I'm now on a new subnet.
So I then changed the AX settings to not distribute an IP and gave the MBP another IP from the block (different from the AX). This gives me the network, but no internet.
What am I doing wrong?

Okay, I made a mistake and forgot to set the DNS servers manually. It seems the second method works fine. I've set up WPA2 security as well - I'm assuming this is okay in this situation. What is the correct term for this setup? A wireless access point bridge? Is there anything more I should know about this setup? TIA

I need help activating my iphone 4 cdma phone with straight talk please

i need help activating my iphone 4 cdma phone with straight talk please .. i have the starter kit just need help activating it please

Settings > General > About.
-> iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone. It works well for me for the past couple of years.
As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

Extend wireless network with multiple airport express and netgear powerline

I currently have the following network configuration:
1. Using ATT u-verse (2-wire 3800HGV-B "modem") to internet
2. Disabled the u-verse modem wireless router, and have connected an Apple Time Capsule wireless router (on a DMZ)
3. Have four Netgear XAVB5001 powerline adapters connected to the time capsule (for our iMac desktops and the Apple TV)
4. Have an Airport Express wirelessly connected to the time capsule to extend range (for our iPhones and iPad)
All this is currently working. What I would like to do is the following, keeping 1-3 above the same:
4. Connect the airport express to the time capsule via Netgear XAVB5101 powerline adapter (instead of wirelessly connecting to the time capsule as it is today) and use it to extend the wireless range of the time capsule
5. Add ANOTHER airport express to the time capsule via powerline adapter (and extend the wireless range elsewhere in the house).
Does anyone have any experience with this kind of setup and can assure that it would work? (I'm trying to decide whether to spring for a couple more powerline adapters and another airport express)
Thanks in advance!
Dave

I had a VERY similar problem: I was trying to extend my wireless network using a hardwired ethernet connection from Airport Extreme to my Time Capsule. Every time I plugged in the wire to the TC, everything disappeared. Unplugged, and boom. Came back.
Here's how I solved it:
Go into Airport Utility and select the unit you are trying to use as a wireless extender and choose to edit it. Then, on the wireless tab select CREATE a wireless network. But, give it the exact same name and password. This is completely counter-intuitive. You would think to choose EXTEND, but this would be wrong. Next choose the network tab. And, select Router mode to Bridge (off).
By choosing the same name and password, your phone, laptop, etc. will think it's on the same network and move seamlessly from one to the other.
See if this fixes your issue. Fixed mine instantly. AND, it only took 3 painstaking hours of checking ethernet connections and rewiring jacks, etc. to figure it out. LOL

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

Need help adding wifi to a wired network with multiple hardwired ethernet

Similar Messages

Maybe you are looking for