NEED HELP APP PROBLEM PLWASE READ

Ok so basically when I go to a free app I try to re install it says to confirm or verify and when I click on it it takes me to my credit card and when I type in the right info and I have money in my account it declined me and then tells me to try again later after I've tried like 10 times its really frustrating and confusing and I need help please reply on what im supposed to do please it even does this for when I try to update apps aswell

I have created an apple id with a credit card. When I download a free app, I am asked for my apple id password. I am not asked for a credit card. There is a setting for login out of your apple id. Perhaps you should log out. So things get reset.
you can create an apple id without a credit card.
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
Robert

Similar Messages

I need help with adobe iv reader.

iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.

i am trying to pin a website in internet explorer to my task bar,i get a
message that adobe v1 could not decode the website, i am not computer saavy
so i don't know what that means,plus this is a new computer 4 me.plus it
worked fine a few days ago. tyvm 4 ur help.
regards,
ray nist
In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time,
[email protected] writes:
Re: i need help with adobe iv reader.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5400013#5400013)

Hi! Need help! I downloaded Reader 9.1 and now it won't install Get error message "Error 1606. Could no access network location %APPDATA%\. I'm about ready to trash my computer! Thanks!

Hi! Need help desperately! I downloaded Reader 9.1 and it won't install. Get the error message "Error 1606. Could not access network location %APPDATA%\. Thanks!

Hello again:
I don't mean to step on any toes here but it seems that the root of the problem is being ignored. I offered before that the problems you are experiencing are due to inconsistencies in the Windows registry. While I could speculate on the various methods of how this came to be, I don't have that kind of time nor is there a need. More than likely it is some type of malware that has infected the system but that should be explored on more suited forums such as MajorGeeks.com or BleepingComputer.com. The way I see it, you have a few paths you can take, all of which will lead you to the same place: no more error 1606 and a functional Reader:
Option 1: Run the Windows Live OneCare free safety scanner to resolve any broken registry links it can find.
Option 2: Manually fix the "broken" registry entries in the Windows registry. While I understand Pat's hesitation to do so, the truth of the matter is it will resolve the immediate issue. Once the APPDATA path is corrected, you should then be able to install Reader.
Option 3: Restore Windows to a previous date using System Restore located in Help & Support of the Start menu.
Option 4: [SLEDGE HAMMER] Reinstall Windows over the top of the current installation (NO FORMAT). Use this option only if you have no other recourse. The potential to lose all personal data and settings is high if this option is not performed correctly. If this option is chosen, be certain to use a "setup" profile (username) different than your current username. If you only have a manufacturer's system restore disk rather than a Windows CD/DVD, you may not have the option NOT to format which WILL result in the loss of personal data. This option should only be performed by someone who has previous knowledge of such or is willing to learn even at the expense of data loss/time/effort.
I HIGHLY recommend that any and all personal data is backed up to an external location such as a USB key, CD/DVD, or external hard drive prior to performing option 2 or 4 above. If you would like any of the options explained in greater detail, feel free to ask and I will oblige.
Best of success!
Michael

Need Help Skype Problems

Please HelpMy skype wont work anymore, it says that it wont work when I try to call someone and I need help thanks. (P.S I have reinstalled Skype with no luck)

lalo-116 wrote:
it works thx so much u are a lifesaver
You are very welcome.
For others:
1. There is no need to uninstall first. It's wasted time and a wasted step that is NOT required.
2. It is important to inform people that if they delete their Skype folder, that they will be deleting ALL their Skype history:
For others:
You do not need to uninstall, or delete anything, if you have this issue, simply install over, what you have, with this:
At the moment the quickest method to fix this is to install the beta version from here: http://skype.com/go/getskype-beta
Note: If you still have issues after doing the above, it's best to post back and get more instructions than to delete ALL your history.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

I need help starting my adobe reader app. no browser seems to recognize I have it.....HELP.?

Ive downloaded reader app for android from play store and opened it , followed your instructions , but still filling out the forms , applications etc... still says I need to download .....NOW WHAT. Can you please help me im very frustrated. Sincerly, Karen O'Brien

Plug the iphone in and go to the music tab in the iphone,not your itunes library.There will be a button in the borrom right that says autofill. Click that and it should thransfer all your music. It worked for me,and i had the same problem.

Help needed: Bluetooth App problem

Hi all,
I am trying to create a bluetooth app using j2me, but i am stuck and i need some help. The bluetooth app i am trying to create is a simple 2d tic-tac-toe game, which uses bluetooth to pass messages between devices in order to play the game. I can send these message in the MIDlet class,but i can't use these methods to send message from the canvas class which is used to create the tic-tac-toe user interface. I have the code available on request if anyone would like a look.
Any help would be great, thanks the help in advance.

I can send these message
in the MIDlet class,but i can't use these methods to
send message from the canvas class which is used to
create the tic-tac-toe user interface.And WHY can't you do that? If you want help, you'll have to give us some more information...

Need help identifying problem (lockup/freezing in Warcraft III & CS)

my macbook pro:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
Serial Number: W862318KVWY
Sudden Motion Sensor:
State: Enabled
It freezes and has black screens during games in which apple Q and force quit doesn't work. I would need to restart the comp. when it freezes the sound would stutter, repeating whatever the game had playing.
things I tried but the macbook pro still froze:
running the game off USB storage device(so i think HD is fine)
wiping HD and reinstalling OS, updating everything and playing it on both USB and the installation of game (not 3rd party apps)
opening the macbook pro and cleaning out the dust (didn't take anything out, just blew dust off)
resetting RAM with apple options P R
took RAM out and put it back in
ran apple hardware test (everything was okay)
running a different game (Counter-Strike on CrossOver and still froze)
Disk Warrior 4 (only minor repairs and it froze in the test game after i ran DW4)
booting system from an external and running the game from USB
things to note:
although sometimes when it freezes, the temperatures are really high - even with fan control (70-80C) but, i've reproduced the lock up with the temperatures at 60C, so i don't think its a heat problem (thermal paste and whatnot)
sometimes in safari, quicktime, itunes, or just on desktop picture i would see a single, horizontal, 1 pixel-height distorted line running across the screen, which i can take screenshots of. no idea what's causing it but it could have some relation with the freezing/lockups
some days it will run without problems for the entire day, just to see lockups the very next day. I think it could be random.
help please..

=\ no one....

I need help having my program read in finite amounts of data at a time

I've attached my diagram. The problem(s) I am having are as follows
I need to read the data from a .txt (alternately .lvm) file 250 entries at a time. The problem with the construction I have now is that the dynamic to array buffer kind of destroys the point of segmenting the data because it reads it in all at once. In addition, I need a way of reading and writing this data so that I am not using the express VI's. Pretend my data file is say C:\data.txt and it is a single column of values approx. 5m entries long.
Further, I have set up the while loop to stop after everything has been processed, I need to set it up such that the while loop stops when all the data have been read in.
Thanks for the help.
Solved!
Go to Solution.
Attachments:
readindata.JPG ‏103 KB

Use the Number of Rows and Offset inputs and the Mark after Read output to get a segment of your array. Put it into a loop until finished or until maximum amount of data you can handle at one time is in memory.
Lynn
Attachments:
Read Segments.vi ‏32 KB

Need Help with Problem Batch Rotating Images in iPhoto 8!

Hello, recently I have been having a lot of problems with pic files becoming unusable once I batch rotate them in iPhoto 8, so now I want to rotate the pictures 180º before I import them into iPhoto. Is there a free program out there that can help me do this without losing any picture quality. I REALLY don't want to have to individually open up over 2000 photos in Preview and individually rotate them that way.
Does this same batch rotating problem occur in Aperture 1.5.6?
TIA for ANY and ALL help!!!

You can create an Automator workflow application to batch rotate a folder of photos 180 degrees. You need to download and install GraphicConverter first. You can use it in the demo mode by first opening it before you drop your folder of photos onto the application .
When you install GC select the option to install the GC Automator workflows. Open Automator and put in the following elements: 1 - Get Finder Items; 2 - Rotate. You can select to use Quicktime or the internal algorithm. Save it as an application.
This all must be done outside of iPhoto and then import into iPhoto.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.
Message was edited by: Old Toad

Need help using JTextArea to read large file

Hi here is the deal.
I've got a large file (about 12Mbytes) of raw data (all of the numbers are basically doubles or ints) which was formed with the ObjectOutputStream.writeInt/writeDouble (I say this to make clear the file has no ascii whatsoever).
Now I do the file reading on a SwingWorker thread where I read the info from the file in the same order I put it originally.
I need to convert it to string and visualize it on a JTextArea. It starts working. However a one point (56% to be exact since I know exactly the number of values I need to read) it stops working. The program doesn�t freeze (probably because the other worker thread froze) and I get no exceptions (even tough I�m catching them) and no errors.
Does anyone have any idea of what the problem could be?
Thank you very much in advance.
PD: I don�t know if it matters but I'm using ObjectInputStream with the readInt/readDouble functions to get the values and then turning them to strings and adding them to the JTextArea.

I can put up the code.
I don't have it with me right now but I'll do it later.
Thank you.
Second. I need to debug a function aproximation that uses a method that has to manage that many numbers. If I don�t put it into a txt and read it there is no way I will know where the problems are, if any. And yes I can look at the txt and figure out problems. It's not that hard.
What I'll try to do is to write directly to regular txt file instead of doing it to the JTextArea.
Thank you for your help and I'll post back with the code and results.
PD: I don't know what profiling is, would you mind telling me?

Need help to not have reader as option

First I am not well spoken when it comes to pcs in general. I am trying to download amazons kindle android app for pc. At one point I attched reader to it and now I dont want it as aoption as I get ammessage that it wont do what I need I have been having trouble trying to figure how allow it to get pst firewall but now when i try to download reader program is only option and considering it wont work how to I get adobe dis-associated from the process. I hope this makes sence to someone out there. please help thanks

It's difficult to follow your explanation as it isn't exact. A good thing would be to post screen shots of your error messages, if not please quote the messages exactly, word for word, completely.

Need help in using dbms_lob.read

I need to upload a file into an Oracle table into a Blob column. The file name along with the file contents are all in one BLOB column.
Once that is done I need to read from the file and extract the file contents and load it into a staging table.
File being uploaded is a *.CSV* file.
E.g. Of the .CSV file is: ABC.csv file and its contents will look like:
1,Hello,Nisha
2,Hi,Ravi
3,Bye, Rahul
Etc…..
Therefore the table containing the BLOB column will contain:
File Creation_date
ABC.csv 09/11/2009
How can I read a file from the BLOB column and upload into a staging table?
Final Staging table should look like:
Record Number Greet Name
1 Hello Nisha
2 Hi Ravi
3 Bye Rahul
I think I am suppose to use dbms_lob.read, but I am not really sure how to use it. If there is any script, kindly mail me the same.
Thanks....

Nisha,
Check this example (test) and see if it can be any help. I have utl_file and sqlldr
First Method -- I loaded alert.log successfully and you can imagine how big this file can be (5MB in my test case)
create table t1clob
( clob_text clob);
CREATE OR REPLACE DIRECTORY DIR AS '/path_to_csv_file/;
DECLARE
   clob_data   CLOB;
   clob_file   BFILE;
BEGIN
   INSERT INTO t1clob
   VALUES (EMPTY_CLOB ())
   RETURNING clob_text INTO clob_data;
   clob_file   := BFILENAME ('DIR', ABC.csv');
   DBMS_LOB.fileopen (clob_file);
   DBMS_LOB.loadfromfile (clob_data,
                          clob_file,
                          DBMS_LOB.getlength (clob_file)
   DBMS_LOB.fileclose (clob_file);
   COMMIT;
END;Second Method: Use of Sqlldr
Example of controlfile
LOAD DATA
INFILE alert.log "STR '|\n'"
REPLACE INTO table t1clob
   clob_text char(30000000)
)Hope this helps.

Need help urgently,problem going on for 3 years

I have had broadband issues for 3 years,in total 7 engineer visists,100s of calls etc and lots of promises and lies from international call centres.
The BT offered to sell me a 2nd line into my property,this seemed like one solution,until,that has now had 3 engineers visits,the last one yesterday,where the engineer was working on the new line,packed up and went without telling me he was going,or that he still couldnt do the work.
I am now under meds from my doctor due to this issue,and I have gone in desperation to the BBC watchdog programme and ofcom for help.
I simply do not know what to do next,please could someone advise me,I am at my wits end and this is causing problems within my home and family.
Thanks

Hi,
Welcome to BT Retail's Community Forum. This is a customer to customer forum.
What colour is the broadband light on the homehub? Do you have any connectivity at all?
Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
A summary of the checks are:
1) Are you connected by master or test socket?.
2) Can you please run a BT speed test (including IP Profile) http://speedtester.bt.com (not beta version)[Best done with a wired, ethernet, connection]
3) is there any noise on your line. dial 17070 option2 from landline. should be silent but slight hum normal on cordless phone.
4) please post adsl line statistics
ADSL Line Statistic Help:
If you have a BT Home Hub like the one below...
Then:
1) Go to http://192.168.1.254 or http://bthomehub.home
2) click Settings
3) Click Advanced Settings
4) Click Broadband
5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
cheers
I'm no expert, so please correct me if I'm wrong

Acrobat 9.4 Crashes, Need Help Diagnosing Problem

I'm running Acrobat 9 Standard (9.4.4 ) on Windows 7 Enterprise 64-bit Service Pack 1. When I choose the File --> "Create PDF Portfolio" menu option in Acrobat I get: "Adobe Acrobat 9.4 has stopped working". Acrobat works fine for just reading PDFs, but it crashes when I try to use "Create PDF Portfolio". I would like to be able to use Portfolios so I'm looking for help in resolving this issue. So far I have:
1.] Googled, looking for others that have reported the same problem. Which was fruitless.
2.] Tried using the Help -> "Repair Acrobat Installation" option. This reinstalled Acrobat, but the problem still existed after the reinstallation.
I'm wondering what log file I might look in to get more information pertaining to the crash when I get "Adobe Acrobat 9.4 has stopped working".
Thank you

I don't have a solution but will add that I have the same problem with Acrobat Pro 9.4.5. I had the problem with my previous XP Professional laptop with 9.4.5 and continue to have the same problem with a new Windows 7 laptop I got two months ago.
With my new laptop I was able to use Create Portfolio one time on the first day I had my new laptop, with Acrobat freshly installed. Next day I got the error message. Had a local admin uninstall and reinstall Acrobat Pro and it worked that day. Next day I got the error message again. Haven't bothered with Portfolios since then.

I need help with problems after the April 2015 update

In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. After over a month of these frequent audio problems and several calls to Verizon during which they boosted my signal and guided me through a factory reset which took all of my photos out of their albums, the final suggestion a few days ago (April 21, 2015) was to download the new software update. I did and I'm not happy with some of the changes e.g. I wish I could have the old home touch buttons back,The jury is still out on sounds quality, but now I have two new annoying problems.
The first is that my car and phone used to bluetooth (connect) as soon as I put my engine on. Now, every time I get in my car I have to go into settings and give the phone permission to have other devices find my phone. Then after one or two tries the bluetooth eventually connects them. I am a Realtor and I need my phone and car to connect automatically every time I get in. I can give the phone permission to connect for up to an hour, but then it goes off. How do I get the opton to stay on?
The second is that I often turn my data off, and I used to do it from the notification panel that I can pull down. I just pulled it down and tapped "data" and the light would go off if the data was off and on if it was on. Now when I tap "data" I can turn it on or off, but the data button stays lit so when the data is off the light is still on. No more quickly glancing to see the data status...I have to tap it and read the notice to find out. Yes, 3G or 4G light up in tiny letters at the top, but data is the only button that stays lit when it is turned off.
Am I missing the steps that would fix these issues?

SiBIMe,
I am sorry to hear of the issues with your device before and after the update. We want to restore the love back to your device. Please keep us posted on the audio issues to see if the update did assist with that issues.
In regards to the two new problems, we want to make sure we get this worked out. Do you have issues with the device only auto connecting to your car or all bluetooths? Do you receive and error message when the device doesn't auto connect and you attempt to connect manually but it fails? As for the data icon, when you tab on the data icon from the notification tab does the 4G actually disappear even thought the data icon is still lit?
Please test your device in Safe mode and let us know if you still experience the same issues. Here is how to place the device in safe mode. http://vz.to/1owbN8K
LindseyT_VZW
Follow us on Twitter @VZWSupport

NEED HELP APP PROBLEM PLWASE READ

Similar Messages

Maybe you are looking for