Need help ASAP- Audio Problem

I am using a Vixia HV40 Canon camera with an external mic (Aazden 105 series UHF) with Final Cut Express 4.0.1 to create a video. When I listen to the audio output through the mic or the camera, everything sounds fine, but after I capture the data onto my computer, the sound comes with a very fuzzy background noise. I don't think that there is any problem with the camera or external mic (I have had a sound technician check them to see if there was something wrong with the sound), but I don't know what to do to fix the problem.
Recently I have been getting an error message when I open FCE saying, "Unable to locate the following external devices: Built-in audio," could this have something to do with my problem? Also, why is it saying this?
I can't seem to find anything online that relates to this problem, please help!

Wondering why you're using the "Voice-over" tool instead of the "Capture" tool. Are you recording live audio or capturing (video and) audio from something you pre-recorded?
Normal practice for me, in capturing stuff I've recorded on my camera, is to connect the camera to the computer (firewire cable), launch FCE, and choose "File/Capture."

Similar Messages

!NEED HELP ASAP! Problem with syncing 4th generation ipod touch

I just bought a new ipod from a friend and itunes won't sync my music and apps onto it because it says it "waiting for changes to apply", what does this mean and how do I fix it? Please help ASAP so I can listen to my music before my 6 hr trip in a couple days.

I figured it out myself the easiest and best thing to do (or it was for me at least) if you already have your own music just go to settings on the ipod and then go to General, then reset, then tap Erase all Content and Settings and accept it. Now my ipod has all my music and apps on it and music cloud which it didnt have before lol. But thank you for the help its greatly appreciated .

Need help with Audio problem

I just installed iTunes 7.3. Now when I try to run the program, I get an error: "iTunes cannot run because it has detected a problem with your audio configuation." Could someone help please?

This is usually due to a Quicktime proble, this Apple article should help:
http://docs.info.apple.com/article.html?artnum=304424

Audio acting up in Premiere Pro | Need Help ASAP

Okay, I need help ASAP because this has been a serious issue for me.
So my source video (an interview) is on PR's timeline. I start playing it and it's working fine, but all of a sudden, the audio skips back to the beginning of the interview, then about 10 seconds later, it gets back on track. I checked the original video that I imported it from and it's all fine. I even reimported the file, but the problem persists.

Okay, problem solved. I took the working source video, took the audio out and put it in there.

Need help ASAP...iPhone activation problems

Today i bought two verizon iPhones from the apple store. I activated one just fine but I'm having problems with the other one. I used the upgrade for one of my lines on the account to purchase the other phone. I actually bought this for a friend who will use the iPhone on her own personal account. When I went to the apple store they "activated" the phone but didn't hook it up to the computer for iTunes or anything. Are there any steps I need to take before I give the phone to her so she can have a smooth transition in activating the phone because she lives in another state than I do? Do I have to hook the phone up to iTunes and activate it on my line or no? then switch back to old phone? Phone has never been hooked up to the computer. Need help ASAP please.

What kind of problems?

Need Help ASAP!!! So FRUSTRATING!!! text message problems!!!

I have 2 problems right now with my BB Torch 9810. I need help ASAP.
1. It only saves 20 text messages. Messages that I received from august 2012. But it seems other messages are not stored. I don't delete messages, so I don't know where my other messages go. And sometimes if you create a new text, text history will show. But not anymore. This have been going on for a long time.
2. When I receive text message from some of my contacts, it will show the first few words of the text. But when you click on it, the message is empty. funny thing is, not all of my contacts are like this.

Hey iragarcia,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing the following to resolve the issue:
1. Create a backup of all your data by using BlackBerry Desktop Software. In BlackBerry Desktop Software go to Device>Backup and save the file onto your PC or Mac.
2. On the BlackBerry Torch 9810 smartphone go to Options>Security>Security Wipe and put a checkmark beside 3rd party applications as well. Type in the word BlackBerry and press wipe data.
Please Note: You can re-install your applications through BlackBerry World.
3. Once completed test sending and receiving some SMS messages prior to restoring any data. If the issue is resolved, then go into BlackBerry Desktop Software and go to Device>Restore and choose custom and only choose contacts.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Objects outside of workspace show in SWF... Need help ASAP!

When I export a flash movie (.swf file)And play it on full screen, the objects that are outside of the workspace show. Can anyone tell me how to fish this problem? need help ASAP! Thanks :]

If what follows isn't sufficient for you to figure out, you'll have to spend some time learning how to work with Flash. While you'll often get help solving problems in these forums, it's less likely you will get tutoring services. Google is a very good resource for tutorials.
To create a mask you draw a shape to the size you want and place it on a layer above all the content you want to mask. A mask is actually not well named because masks normally hide things, while in the graphics world, masks define the are where things are shown... so when you apply a mask to something, only what is under the mask shows. To finalize, you right click on the label area of the mask's layer and select Mask from the menu that appears. You may have to drag lower layers up towards the mask layer to get them included, whicxh is why I mentioned creating the rest of the content as a movieclip (a single layer object).
To control the visibility of objects you set their visibility to true or false (AS2: mcName._visible = true (or false), AS3:mcName.visible = true (or false)).
To create a frame around the stage, add a new layer atop everything and draw a rectangle big enough to hide all the content you don't want showing that is off the stage. Then draw a rectangle that is the same size as the stage on top of that first rectangle, placing it over the stage, and then deselect anything that is selected. Then reselect the smaller rectangle you just drew and delete it. The larger rectangle is now framing your stage.

My Curve 9300 lost service need help ASAP

I lost all serivce on my blackberry curve 9300 and the only way I get service is if I go outside my house. Sometimes I get service in my house but it's for 5 seconds and then I get "searching for network" then it goes to "SOS" I need help ASAP.

yankeegirl32491 wrote:
My carrier won't do anything about it because I'm not an authorized user of the account which is stupid. I wasn't having a problem with service for about a year and yesterday my service just cuts out for no apparent reason.
Hello...well, that's a bit disconcerting...aiding and abetting what could be an unethical use of service...but I'm hopeful that there are further details that mitigate that suspicion. In any event, review this KB for perhaps helpful information:
KB03448 Network status indicator shows "SOS" on the BlackBerry smartphone
It is possible that they have a tower out, and you now are receiving service from a more distant tower, which does not have adequate signal strength to work through the walls of your house. But, sadly, there is no way for you to actually find out if such is the case or not.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Premiere Pro CS6 keeps crashing when exporting h.264 (NEED HELP ASAP!)

Alright, so I have a video that I've probably rendered around 30 times now and it ALWAYS ends up either freezing up, and then Premiere stops working, or it just stops working.
I have a YouTube channel and I'm going away for 2 days tomorrow and I really need to get my videos up online, but I just can't render them! Does anyone know how to fix this? I really need help ASAP!
Here are my export settings.
http://imgur.com/ZgAuI4a,OMz4FEd,B8gjHws

While there are "some" Adobe employees who read/post here, this is primarily a user to user forum... NOT Adobe support
You are simply going to have to wait for someone to read your message, and look at your settings, and reply... IF that person has an idea (20 minutes is really not much time)
While you wait for someone to reply with ideas, some reading about your freezing problem... and questions to help people help you
1st, what are you editing?
Codec & Format information, with 2 links inside to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
2nd, you need to give LOTS more information about your computer
-PPro Information FAQ http://forums.adobe.com/message/4200840
3rd, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
4th, do you have Dual video adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

IPad deactivated. Need help asap!!!

My daughter deactivated my husband's iPad. The screen says that it's deactivated and that I need to connect it to iTunes. The problem is, that it's connected and a little box appears saying "To allow access, please respond on your iPad...". How am I going to respond if its not working?! Need help asap!!!!

Is that the computer that it's normally synced to ? With iOS 7 you need to need 'trust' computer that it's connected to, if the iPad is disabled you won't be able to trust it, you will need to put the iPad into recovery mode in order to be able to reset the iPad - there are instructions towards the bottom of this page : http://support.apple.com/kb/HT1212 . You can then restore/resync the content to it.

All my Albums in PSE 10 have disappeared. Need help asap to recover.

All my Albums in PSE 10 have disappeared. Need help asap to recover.
I have over 50 Albums and over 20K photos.
I did nothing wrong that I am aware of.
I believe Adobe intentionally sabotages older versions to force you to purchase the new version.
This has happened now 4 times in a row. To hide what they are doing they change the problems.
When I purchase the new version the problem miracleously disappears.

Hi,
Please ensure that correct catalog is open. Can you please show me a screenshot of your Elements Organizer 10 catalog?
To confirm if albums are actually gone or is in some odd view, you may check at one more place - click Find > By Details (Metadata) > choose "Album" and see if your albums get populated in the adjoining dropdown in this dialog?
Thanks
Andaleeb

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

My ipod says i have no music on it, but when i plug it into itunes, and look under music on my ipod, its all there. NEED HELP ASAP!!!!! all the music came from a computer which i no longer have, so my ipod is the only place where that music is.

This morning, i downloaded about 16 songs to put on my ipod, and i manually dragged them over to my ipod to sync that way (like i always do because the music on my ipod came from a different computer which I no longer have) and on my way to work, i realized my ipod says "no content" under Music. However, when I plug my ipod into itunes and click on the music tab under my ipod name, all of my music is there. What happened and how do i get that music back on my ipod? I need help asap.

You had a glitch and the music files got corrupted. I know of no way to uncorrupt them.
You can try using a computer app like iFunbox
http://dl.i-funbox.com/
to see if yo can get them from the iPod in a usable file.
Otherwise you will have to re import them to your computer and sync
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Need help ASAP- Audio Problem

Similar Messages

Maybe you are looking for