NEED HELP ASAP on RAM for MBP Unibody 15"

I need to max out the memory/ram in my MBP 2.53 4GB 250GB..... Can anyone tell me what type of RAM I need and what my options are please?
I have taken on a project that requires to have multipe applications and windows running at the same time and my computer is running like a dog for the first time EVER!!!!!
Hellllllpppp!!!

You could always look in your manual however I believe your model (Mid 2009) will max out at 8 GB using RAM like this.
Regards,
Roger

Similar Messages

Needs help in buying ram for w520

hi guys!
Im going to buy a w520 with "8 GB ram (installed) / 16 GB (max) - DDR3 SDRAM - 1333 MHz - PC3-10600 ( 2 x 4 GB )" from amazon.
So i was thinking of buying w520 with a "Corsair 8 GB DDR3 Laptop Memory Kit CMSO8GX3M2A1333C9" to make it into 16g ram. will there be any problem?
this is the spec im looking for:
Product Features
Intel Core i7 2820QM / 2.3 GHz ( 3.4 GHz ) ( Quad-Core )
8 GB (installed) / 16 GB (max) - DDR3 SDRAM - 1333 MHz - PC3-10600 ( 2 x 4 GB )
500 GB - Serial ATA-300 - 7200 rpm, DVD-Writer
15.6" LED backlight TFT 1920 x 1080 ( Full HD ) - 16:9, NVIDIA Quadro 1000M / Intel HD Graphics 3000
Microsoft Windows 7 Professional 64-bit Edition
Processor, Memory, and Motherboard
Hardware Platform: PC
Processor: 2.3 GHz Intel Core i7
Number of Processors: 1
RAM: 8192 MB
RAM Type: DIMM
Hard Drive
Size: 500 GB
Type: Serial ATA
Additional Drives: DVD+-RW
Graphics and Display
LCD Native Resolution: 1920x1080
Cases and Expandability
Size (LWH): 0 inches, 0 inches, 0 inches
Weight: 7 pounds
Wireless
Wireless Type: 802.11n
Solved!
Go to Solution.

Hi, X, et al,
I too have been using these exact same Corsair DIMMs with no problems since April. The "however" part is that I would get 1600mhz CL 9 DIMMs instead at this juncture. They don't cost much more, and if you want to upgrade your existing 1333mhz RAM at some point you can, without throwing away all four DIMMs. Yes, you can mix 1600 and 1333 - they will be clocked at 1333. Just make sure to get CL 9 and not CL 11. For example:
1600 mhz CL 9 $50 8GB
might work out for you. I do prefer buying from Amazon over Newegg though. Less return hassles.
Anything higher than 1600mhz is a waste - it's the fastest clock rate your chip set can handle.
Best, ZZ

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Need Help ASAP. Deleting Underline in Adobe Reader Touch.

I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.

thank you
ส่งจาก จดหมายของ Windows
จาก: ambersenos
ส่งเมื่อ: อา. 11 มกราคม 2558 21:23
ถึง: thang dinhvan
Need Help ASAP. Deleting Underline in Adobe Reader Touch.
created by ambersenos in Adobe Reader Touch for Windows 8 - View the full discussion
I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7085957#7085957 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7085957#7085957
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Objects outside of workspace show in SWF... Need help ASAP!

When I export a flash movie (.swf file)And play it on full screen, the objects that are outside of the workspace show. Can anyone tell me how to fish this problem? need help ASAP! Thanks :]

If what follows isn't sufficient for you to figure out, you'll have to spend some time learning how to work with Flash. While you'll often get help solving problems in these forums, it's less likely you will get tutoring services. Google is a very good resource for tutorials.
To create a mask you draw a shape to the size you want and place it on a layer above all the content you want to mask. A mask is actually not well named because masks normally hide things, while in the graphics world, masks define the are where things are shown... so when you apply a mask to something, only what is under the mask shows. To finalize, you right click on the label area of the mask's layer and select Mask from the menu that appears. You may have to drag lower layers up towards the mask layer to get them included, whicxh is why I mentioned creating the rest of the content as a movieclip (a single layer object).
To control the visibility of objects you set their visibility to true or false (AS2: mcName._visible = true (or false), AS3:mcName.visible = true (or false)).
To create a frame around the stage, add a new layer atop everything and draw a rectangle big enough to hide all the content you don't want showing that is off the stage. Then draw a rectangle that is the same size as the stage on top of that first rectangle, placing it over the stage, and then deselect anything that is selected. Then reselect the smaller rectangle you just drew and delete it. The larger rectangle is now framing your stage.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

First, ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others

My Curve 9300 lost service need help ASAP

I lost all serivce on my blackberry curve 9300 and the only way I get service is if I go outside my house. Sometimes I get service in my house but it's for 5 seconds and then I get "searching for network" then it goes to "SOS" I need help ASAP.

yankeegirl32491 wrote:
My carrier won't do anything about it because I'm not an authorized user of the account which is stupid. I wasn't having a problem with service for about a year and yesterday my service just cuts out for no apparent reason.
Hello...well, that's a bit disconcerting...aiding and abetting what could be an unethical use of service...but I'm hopeful that there are further details that mitigate that suspicion. In any event, review this KB for perhaps helpful information:
KB03448 Network status indicator shows "SOS" on the BlackBerry smartphone
It is possible that they have a tower out, and you now are receiving service from a more distant tower, which does not have adequate signal strength to work through the walls of your house. But, sadly, there is no way for you to actually find out if such is the case or not.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm restoring my iPhone right now, need help ASAP

So I've had a corrupt file that's been taking up 7GB in my 'other' stuff on my iPhone 5 so I'm finally restoring it right now, but I'm guessing the backup data with have saved whatever that corrupt file is in it.
So 3 questions: • If I don't want to backup now but for some reason decide I want to in a say a day or so what would I do?
• Can I restore my phone from my iCloud backup, if so how?
• After restoring my iPhone will it create new backup data that will wipe over the already existing data with the corrupt file in it or what?
Thanks for any help/advice, I'm in the middle of doing this so need help asap if anyone can help.

1. make a backup any time you want.
2. Yes, if you have a iCloud backup
Settings > General > Reset > Erase All Content and Settings
3.Yes on computer it will replace the old backup. (I suggest you manually delete the backup first)
iTunes > Preferences... > Devices > select backup and click the Delete button.

Premiere Pro CS6 keeps crashing when exporting h.264 (NEED HELP ASAP!)

Alright, so I have a video that I've probably rendered around 30 times now and it ALWAYS ends up either freezing up, and then Premiere stops working, or it just stops working.
I have a YouTube channel and I'm going away for 2 days tomorrow and I really need to get my videos up online, but I just can't render them! Does anyone know how to fix this? I really need help ASAP!
Here are my export settings.
http://imgur.com/ZgAuI4a,OMz4FEd,B8gjHws

While there are "some" Adobe employees who read/post here, this is primarily a user to user forum... NOT Adobe support
You are simply going to have to wait for someone to read your message, and look at your settings, and reply... IF that person has an idea (20 minutes is really not much time)
While you wait for someone to reply with ideas, some reading about your freezing problem... and questions to help people help you
1st, what are you editing?
Codec & Format information, with 2 links inside to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
2nd, you need to give LOTS more information about your computer
-PPro Information FAQ http://forums.adobe.com/message/4200840
3rd, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
4th, do you have Dual video adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Audio acting up in Premiere Pro | Need Help ASAP

Okay, I need help ASAP because this has been a serious issue for me.
So my source video (an interview) is on PR's timeline. I start playing it and it's working fine, but all of a sudden, the audio skips back to the beginning of the interview, then about 10 seconds later, it gets back on track. I checked the original video that I imported it from and it's all fine. I even reimported the file, but the problem persists.

Okay, problem solved. I took the working source video, took the audio out and put it in there.

Need help ASAP...iPhone activation problems

Today i bought two verizon iPhones from the apple store. I activated one just fine but I'm having problems with the other one. I used the upgrade for one of my lines on the account to purchase the other phone. I actually bought this for a friend who will use the iPhone on her own personal account. When I went to the apple store they "activated" the phone but didn't hook it up to the computer for iTunes or anything. Are there any steps I need to take before I give the phone to her so she can have a smooth transition in activating the phone because she lives in another state than I do? Do I have to hook the phone up to iTunes and activate it on my line or no? then switch back to old phone? Phone has never been hooked up to the computer. Need help ASAP please.

What kind of problems?

Need Help ASAP!!! So FRUSTRATING!!! text message problems!!!

I have 2 problems right now with my BB Torch 9810. I need help ASAP.
1. It only saves 20 text messages. Messages that I received from august 2012. But it seems other messages are not stored. I don't delete messages, so I don't know where my other messages go. And sometimes if you create a new text, text history will show. But not anymore. This have been going on for a long time.
2. When I receive text message from some of my contacts, it will show the first few words of the text. But when you click on it, the message is empty. funny thing is, not all of my contacts are like this.

Hey iragarcia,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing the following to resolve the issue:
1. Create a backup of all your data by using BlackBerry Desktop Software. In BlackBerry Desktop Software go to Device>Backup and save the file onto your PC or Mac.
2. On the BlackBerry Torch 9810 smartphone go to Options>Security>Security Wipe and put a checkmark beside 3rd party applications as well. Type in the word BlackBerry and press wipe data.
Please Note: You can re-install your applications through BlackBerry World.
3. Once completed test sending and receiving some SMS messages prior to restoring any data. If the issue is resolved, then go into BlackBerry Desktop Software and go to Device>Restore and choose custom and only choose contacts.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

NEED HELP ASAP on RAM for MBP Unibody 15"

Similar Messages

Maybe you are looking for