Need help ASAP! Paper on sorting algorythms! PLEASE!!!

Hello!
I don't do this normally but I'm really dead desperate and out of ideas! I need to do a paper on sorting algorythms for tomorrow (11th december), and I'm all out of ideas. Okay I start in the beginning:
I need to analyse 9 sorting algorythims, they are: Bubble, Insertion, Shell, Quick, Merge, Heap, Bucket, Couting, Radix.
I found plenty programcodes and stuff about these sortings, but there are other things I need to do. The task is: I need to run the sorts on 500, 1000, 2000, 5000, 10000 items, 10 times each, for each algorythm. And I need to count the swaps in each run and measure the time it takes to complete. This is the most important problem I have now. No matter what I did, NetBeans won't compile the codes I found on the net no matter what I do. If somebody can help me out so I can run the codes on my computer, or alternatively somebody can run the sorts for me and tell me the results I would be forever grateful!!!
I tried to find answers until now, you are my last hope! I need to deliver this paper tomorrow, so if somebody has any little idea, no matter how small, please do tell!!! PLEASE!!!!!! PRETTY PLEASEEE!!!!!

okay, I get it. I'm a lazy bastard. Someone who has tons of exams coming up that are too very important and didn't had the time to dig in to find solutions for his paper because he was busy studying the hell out of himself. I know I'm not the best student there is, and I have time managemet problems, and on top of that I tend to be lazy at times. But I was searching for solutions and possible answers all weekend, trying to make this work, but I couldn't do it. I come here in a last desperate attempt, hoping that somebody will actually help me, and what do I get? A kick in the ... and get all my bad things shoved in my face, and declare me a useless piece of junk and a shame of a Computer Sciences student.
but there are other things I need to do.I meant that I need other things in the paper too, not myself. And thanks for the kind words JosAH, you worked hard to spot the only mistakable part in my writing and turn it against me. And no, I did not forget all about my homework, but I was busy studying everything else for the exams. And yes I have time management problems and I'm pretty ashamed about it, but I'm only a third semester student.
Go away.I apologise for any inconveniece I caused, and I'm sorry I asked for help! Won't happen again.
A sad student from Hungary

Similar Messages

  • Need Help ASAP  my State tax form is in a PDF file and the attachment in my email says Please wait

    Need Help ASAP  my State tax form is in a PDF file and the attachment in my email says Please wait...
    I tried downloading updates like it said to but it still will not display the document.  How do I print the PDF file ASAP

    Can you give us a LOT more info?
    What email client? What version of Reader (I can only assume you even have Reader at this point)?
    Please wait? I'm sure it says more than that, right?
    Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
    Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
    Help us help you.

  • I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

  • How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    Vera,
    Use View > View Options, and set 'Sort By" to "Manual Order."
    Then you will be able to drag-n-drop songs up and down the list.

  • I restored my iphone and updated it but the progress didn't complete and now my iphone is not working. i need help asap.

    my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou

    it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

  • Need Help ASAP. Deleting Underline in Adobe Reader Touch.

    I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.

    thank you
    ส่งจาก จดหมายของ Windows
    จาก: ambersenos
    ส่งเมื่อ: อา. 11 มกราคม 2558 21:23
    ถึง: thang dinhvan
    Need Help ASAP. Deleting Underline in Adobe Reader Touch.
    created by ambersenos in Adobe Reader Touch for Windows 8 - View the full discussion 
    I don't understand why it won't let me delete the strikeout or underline in my Adobe Reader Touch. There is no clear option when I highlight it and write click and the "Ctrl-delete" option is not working either. I need to get rid of both of these. Did them by mistake....simple task but so frustrated that I have spent 30+ minutes trying to figure this out. Please help.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7085957#7085957 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7085957#7085957
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

    Hi experts!
    Got an error when extracting data with extractor 2lis_04_matnr.
    System says (short dump):
    DUMP TEXT START----
    Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
    Exception:   CX_SY_IMPORT_MISMATCH_ERROR
    Error when attempting to import object "MC04P_0MAT_TAB".
    The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
    An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure  "MCEX_BW_LO_API" "(FUNCTION)".                                                                             
    Since the caller of the procedure could not have expected this exception      
    to occur, the running program was terminated.                                
    The reason for the exception is:  When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
    DUMP TEXT END----
    Please, can someone explain me how to solve it? 
    Really need help ASAP!
    Thanks in advance,
    Jaume
    Message was edited by:
            Jaume Saumell
    Message was edited by:
            Jaume Saumell

    Hi,
    Check this note: 328181
    So you need to delete entries in SM13/LBWQ for application and also detup table content.
    And then refill teh set up table.
    If you are in production clear the entries by running collective run no of times for this application 04.
    With rgds,
    Anil Kumar Sharma .P

  • My Curve 9300 lost service need help ASAP

    I lost all serivce on my blackberry curve 9300 and the only way I get service is if I go outside my house. Sometimes I get service in my house but it's for 5 seconds and then I get "searching for network" then it goes to "SOS" I need help ASAP.

    yankeegirl32491 wrote:
    My carrier won't do anything about it because I'm not an authorized user of the account which is stupid. I wasn't having a problem with service for about a year and yesterday my service just cuts out for no apparent reason.
    Hello...well, that's a bit disconcerting...aiding and abetting what could be an unethical use of service...but I'm hopeful that there are further details that mitigate that suspicion. In any event, review this KB for perhaps helpful information:
    KB03448 Network status indicator shows "SOS" on the BlackBerry smartphone
    It is possible that they have a tower out, and you now are receiving service from a more distant tower, which does not have adequate signal strength to work through the walls of your house. But, sadly, there is no way for you to actually find out if such is the case or not.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPad deactivated. Need help asap!!!

    My daughter deactivated my husband's iPad. The screen says that it's deactivated and that I need to connect it to iTunes. The problem is, that it's connected and a little box appears saying "To allow access, please respond on your iPad...". How am I going to respond if its not working?! Need help asap!!!!

    Is that the computer that it's normally synced to ? With iOS 7 you need to need 'trust' computer that it's connected to, if the iPad is disabled you won't be able to trust it, you will need to put the iPad into recovery mode in order to be able to reset the iPad - there are instructions towards the bottom of this page : http://support.apple.com/kb/HT1212 . You can then restore/resync the content to it.

  • Need help ASAP...iPhone activation problems

    Today i bought two verizon iPhones from the apple store. I activated one just fine but I'm having problems with the other one. I used the upgrade for one of my lines on the account to purchase the other phone. I actually bought this for a friend who will use the iPhone on her own personal account. When I went to the apple store they "activated" the phone but didn't hook it up to the computer for iTunes or anything. Are there any steps I need to take before I give the phone to her so she can have a smooth transition in activating the phone because she lives in another state than I do? Do I have to hook the phone up to iTunes and activate it on my line or no? then switch back to old phone? Phone has never been hooked up to the computer. Need help ASAP please.

    What kind of problems?

  • Need Help ASAP!!! So FRUSTRATING!!! text message problems!!!

    I have 2 problems right now with my BB Torch 9810. I need help ASAP.
    1. It only saves 20 text messages. Messages that I received from august 2012. But it seems other messages are not stored. I don't delete messages, so I don't know where my other messages go. And sometimes if you create a new text, text history will show. But not anymore. This have been going on for a long time. 
    2. When I receive text message from some of my contacts, it will show the first few words of the text. But when you click on it, the message is empty. funny thing is, not all of my contacts are like this. 

    Hey iragarcia,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest performing the following to resolve the issue: 
    1. Create a backup of all your data by using BlackBerry Desktop Software.  In BlackBerry Desktop Software go to Device>Backup and save the file onto your PC or Mac.
    2. On the BlackBerry Torch 9810 smartphone go to Options>Security>Security Wipe and put a checkmark beside 3rd party applications as well.  Type in the word BlackBerry and press wipe data.
    Please Note: You can re-install your applications through BlackBerry World.
    3. Once completed test sending and receiving some SMS messages prior to restoring any data.  If the issue is resolved, then go into BlackBerry Desktop Software and go to Device>Restore and choose custom and only choose contacts.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • All my Albums in PSE 10 have disappeared.  Need help asap to recover.

    All my Albums in PSE 10 have disappeared.  Need help asap to recover.
    I have over 50 Albums and over 20K photos.
    I did nothing wrong that I am aware of.
    I believe Adobe intentionally sabotages older versions to force you to purchase the new version.
    This has happened now 4 times in a row.  To hide what they are doing they change the problems.
    When I purchase the new version the problem miracleously disappears.

    Hi,
    Please ensure that correct catalog is open. Can you please show me a screenshot of your Elements Organizer 10 catalog?
    To confirm if albums are actually gone or is in some odd view, you may check at one more place - click Find > By Details (Metadata) > choose "Album" and see if your albums get populated in the adjoining dropdown in this dialog?
    Thanks
    Andaleeb

  • Stuttering flv playback issue- need help asap

    We need help asap. Have a project is due to deliver today (5/14).
    We have a video to go on a dvd-rom, live action with Motion Graphics behind.
    When output is done thru Projector the Motion Graphics stutter as they scroll.
    Here is more technical info:
    Stuttering flv playback issue:
    Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
    Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
    Frame by frame analysis shows all frames are present with no jumps tears or skips.
    Tried several output paths, programs and settings to create a smooth flv file to no avail.
    We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
    We adjusted keyframe rates from low to all frames, no luck.
    We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
    Playback in the flash projector seems to choke slightly no matter what we do.
    Have also posted in the Director Forum.
    Any help much appreciated!

    Here are a few ideas off the top of my head:
    Try playing the file using a different xtra, sometimes different ones will work better.  If you have Director 11.5, there is a native flv playback xtra.
    You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
    Once you have the video in Director, try making the member Direct To Stage (DTS).  If it is already DTS, try making it not DTS.
    Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
    Try lowering your video's data rate further or try using a different codec.
    Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
    Try compressing the flv with different software.  FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

  • My ipod says i have no music on it, but when i plug it into itunes, and look under music on my ipod, its all there. NEED HELP ASAP!!!!! all the music came from a computer which i no longer have, so my ipod is the only place where that music is.

    This morning, i downloaded about 16 songs to put on my ipod, and i manually dragged them over to my ipod to sync that way (like i always do because the music on my ipod came from a different computer which I no longer have) and on my way to work, i realized my ipod says "no content" under Music. However, when I plug my ipod into itunes and click on the music tab under my ipod name, all of my music is there. What happened and how do i get that music back on my ipod? I need help asap.

    You had a glitch and the music files got corrupted. I know of no way to uncorrupt them.
    You can try using a computer app like iFunbox
    http://dl.i-funbox.com/
    to see if yo can get them from the iPod in a usable file.
    Otherwise you will have to re import them to your computer and sync
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My pages document wont open NEED HELP ASAP

    when I go to open a pages document on my mac book pro, the document I'm trying to open is pale and i can't open it. I NEED HELP ASAP.

    How did you install Pages & what version? What model of Mac are you using & what version of OS X?
    The answers to those questions will help anyone trying to answer.

Maybe you are looking for

  • Error Occured - Three state workflow

    http://www.eggheadcafe.com/software/aspnet/33106814/error-occured--three-state-workflow.aspx I faced this issue and was able to resolve it. I am hoping this will be helpful to someone who might get into trouble using the default three state workflow.

  • Gather_table_stats and AWR

    Hi all, i would like to disable automatic gathering of table statistics with dbms_scheduler.disable(name => 'SYS.GATHER_STATS_JOB'), because we like to gather statistics every time immediatly after we batch load our tables in our data warehouse. Is i

  • In iTunes, it shows that there are 6 apps to be updated, but afaik that's wrong.

    This started happening a few months ago and I have ignored it and just gone about updating my apps more or less weekly, but it just went from 5 updates available to 6 -- I don't know why = is there any way to clear this out or figure it

  • Regarding Excel file generation from java

    Hi all, I want export my JTable information to an excel when a specified action is occured. I already completed this task using some third party api. Some body told me, there is api in j2sdk itself for export data to excel file. but i didnt find that

  • Set up/maintain order type dependent parameters for order type PI01

    hello all, i would like to know how to set up/maintain order type dependent parameters for order type PI01 for a particular plant. thanks, maxx