Need Help ASAP with steps in repairing file

Im am currently recording a audio book at 48000 24bit mono (as requested by individual) and I need to do three things and I'm not sure if the order is important and if I have extra steps not needed. Three things needed repair clipping, delete noise and normalize to -0.1
I have been running the restore lightly clipped and it seems to work fine but I notice it reduces the amplitude (no problem) I know I can normalize. I also need to extrac the noise with which I can use noise reduction, then I need to noramalize everything. Are these the proper steps or should I be doing it differently and if so how and why. I am doing this out of the country right now and internet is very slow and irregular so I patiently await any response anyone may have.
Thank you so much....

Thank you for your input and suggestions. The language that we are recording is one that has many sounds that will peak unless we set the gain so low there would hardly be any sound at all. We are also in a area with many outside noises such as cars, motorcycles, construction work etc etc.
our sound booth is nothing more than
Mattresses put together to inclose the reader and this is one of our best situations we have been able to do so far, so as you can see there are many challenges that we face with each situation and area we have to work in. Thanks for your comments and suggestions we appreciate them.
Sent from my iPhone
My apologies for any typos

Similar Messages

  • Need help ASAP with photoshop elements 11

    Please I need help its photoshop elements 11 but I can't put up the pic I need help with could someone help me out by using Facebook, Amanda Jayne Clarke I have a pic of a little girl n a horse
    Please i need help ASAP

    well you can find many tutorials about how to change background in Photoshop Elements. It ranges all the way from using magic extractor to making a selection using lasso and magnetic lasso tools. But I really prefer using a mask for it. Here is how I would change the background of image A and use Image B as the background.
    Open image B in photoshop elements editor- expert mode.
    go to file->place and choose the image A to place over image B
    go to layers panel by choosing Window-> layers from menu bar. Right click the layer A choose simplify layer.
    with layer A selected, choose layer>layer mask> reveal All from menu bar. It would create a layer mask on the layer A.
    Select the mark layer of layer A, choose the brush tool and change foreground color to black. Paint all over the are you want to remove from the layer A. if you make an error, change the color white to get your image area back. it is a good practice to use lower opacity(~60) while using layer mark as it gives you more control over with how much opacity you want to remove the background
    Happy Editing

  • NEED HELP ASAP with finishing setup of new ipod

    So I have the screen where it shows which things to sync...music, pics,etc. Its where i am finishing the setup for the new ipod. I click DONE and everytime itunes freezes and wont do anything. When i close the laptop then open it back up, a message comes up saying ipod can not be synced, the disk can not be read from or written too. ive tried restarting the computer, uninsstalling and reinstalling itunes, restoring ipod, doing it under a different user on the laptop. also everything else runs fine while itunes freezes after clicking done so i dont know what is wrong. I think i just need to take back the ipod and get a new one. please help ASAP and thanks

    Matrick65 wrote:
    I did take it back and it did the same thing.
    Right, well it must be something to do with either your computer or some program that is running that are causing the problem.
    Totally uninstall iTunes by using Revo Uninstaller (see the below link for the download site). If you have already uninstalled iTunes then reinstall it. The reason I say this is because Revo does a more thorough job at uninstalling than the usual uninstall methods that Windows or the programs own uninstaller does, and for to be able to use Revo to uninstall, you will first need to install iTunes again.
    Revo Uninstaller link http://download.cnet.com/Revo-Uninstaller/3000-2096_4-10687648.html?part=dl-6294 459&subj=dl&tag=button
    Download and install the latest version if iTunes from here, remembering to chose the correct version for your operating system:
    http://www.apple.com/itunes/download/
    Once iTunes has downloaded, reinstall. Once its finished installing, it might be an idea to access your computers list of startup programs and deselect any items that are not necessary, has one of these might be what is causing the problem. A program called CCleaner has a feature that allows selection & de-selection of startup items/programs.
    Once you have deselected the unnecessary startup programs, restart your computer and try again with iTunes and see if you still have the problem. Just be careful has to not de-select a necessary program when going through the startup programs. If the problem still remains after de-selecting has many programs has you think are safe to be de-selected in order to determine if these are the cause of your problem. Then use Revo Uninstaller to uninstall iTunes. When you use Revo to uninstall iTunes, choose the ADVANCED method, has this is the most thorough method and removes left over registry entries, which might be what is causing your problem. Only choose the BOLD entries in the list (Revo uninstaller). Once you have selected and deleted the leftover entries, restart your computer and try to reinstall iTunes again.
    Are you using Windows 7?

  • Need help ASAP with Data Flow Task Flat File Connection

    Hey there,
    I have a Data Flow Task within a ForEach loop container.  The source of the flow is ADO.NET connection and the destination is a Flat File Connection.  I loop through a collection of strings in the ForEach loop.  Based on the string content,
    I write some data to the same destination file in each iteration overwriting the previous version. 
    I am running into following Errors:
    [Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
    [Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
    [SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
    I know what's happening but I don't know how to fix it.  The first time through the ForEach loop, the destination file is updated.  The second time is when this error pops up.  I think it's because the first iteration is not closing the destination
    file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.
    This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
    Any help is greatly appreciated.
    Thanks! 

    Thanks for the response Narsimha.  What do you mean by FELC? 
    First time poster - what is the best way to show the package here?

  • Need help: Problems with exported Dreamweaver html file in different browsers

    I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded.  For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook.  Does anyone know how to help with this, or had to work around this problem in the past?
    I've attached our html file as well.
    We're an eco startup with limited time and budget - so any help you have would be so appreciated.
    Thank you!!

            World Centric Monthly Newsletter   August 2009     
    Palo Alto Joins the Ban Against          
             Non-Recyclable Materials
           This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
           by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
           Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
           to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
           were not addressed in bill’s contents.
           Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers.     There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
             are present in 100% of all human fat tissue in the
             United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
             PS is rarely recycled and does not biodegrade.     Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
           to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010!     For more information about polystyrene
           visit Earth Resource.     For a partial energy, emissions and water analysis
           of polystyrene and its alternatives visit our website.           World Centric Compostable
             Hot Cup Lid
             World Centric is pleased to announce we now offer a fully compostable hot cup lid that
             fits our 10oz, 12oz, 16oz,
             and 20oz paper hot cups.
           The lids can be ordered in cases of 1000 or packs of 100.
           For more information or to order, please visit our website.           This Month
             We’d Like to Applaud
           Project Open Hand
           San Francisco's non-profit
           organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
           California’s San Francisco and Alameda counties.
           Programs include meals, groceries and nutrition information as well as education and referral programs
           for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
           and staying healthy.
           Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
           If you are interested in making a donation,
           please visit Project Open Hand.
           Help Project Open Hand continue to do what it
           does best – deliver quality food to those in need.           
    “World Centric has gone
               about every aspect of
               business in the most
               sustainable of ways. 
               It is a model for socially
               responsible business.”
               Ari Patz
               Styrophobia                          
                   Industry Trends
               Although PLA is a sustainable alternative to a petrochemical-
               derived product, its limitation has
               been not only its cost, but its inability
               to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
               However, researchers at Teijin
               (formerly in partnership with Cargill)
               have improved their plant-based
               ‘Biofront’ PLA polymer to be able
               to withstand higher temperatures –
               by modifying its hydrolytic resistance.
             Get more information here.                          
                   Get Great Deals!
                   Check out our clearence items.
                   Did you know?
               Styrene can leach from polystyrene.
               Over the long term, this can act as
               a neurotoxin. Studies on animals
               report harmful effects of styrene
               on red-blood cells, the liver, kidney,
               and stomach organs.
               US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.                          
                   Where to Find us:
                   CRRA Conference
                   August 2 - 5
                   Palm Desert
                          Western Foodservice
    & Hospitality Expo
                 August 30 - September 1
              Livable Green
                 September 19
    San Mateo                                
         Find us:            World Centric
    2121 Staunton Ct. Palo Alto, CA
    You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
    Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
    This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
    You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
    Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
    This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.

  • Need Help ASAP with MS Project Professional 2013 - 60-day Trial Download

    I followed all steps to download the 60-day trial of MS Project Professional 2013, and it doesn't work.
    Once I get to the download manager and download what I think is the trial application, the file comes in as: ProjectProfessional_x86_en-us.img. I tried to launch the program once downloading was completed while Download Manager was open, and it
    asks for "choose program you want to use to open this file". The file is specified as disc image file (saved on my file - downloads). An icon didn't successfully download to my deskstop.
    Where can I download the actual 60-day Trial Application? I've tried link below and started steps from that point and wasn't successful as it just accepted file as .img and wouldn't save onto my computer.
    Has anyone encountered the downloaded trial file as an .img file?
    How can I prevent my computer from reading the file as a disc image file in my downloads?
    What is the correct extension file of the trial application?
    Will product key from original attempted trial download work when attempting 2nd download?
    When downloaded successfully, should the file be full data application not just .img file that originally was received on 1st and 2nd attempts at downloading trial?
    Thanks for your help!
    Loren

    Helga --
    Do not despair, my friend, for there is a way to install the trial software without burning a CD.  I use a tool called 7-Zip that can extract the files in an IMG or ISO file easily.  It extracts the files and folders into a folder of your choice. 
    You can download the 7-Zip software for free at:
    http://www.7-zip.org/
    And no, I do not work for this company.  I simply user their tool and like it because it allows me to install software without needing to burn a CD or DVD of the software.  And by the way, I downloaded the same trial IMG file that you did and
    7-zip was able to extract the files.  From that point, I could install the trial version of Project 2013, as needed.  Hope this helps.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • Need help asap with Error #2109!

    Need major help in an error that is driving me crazy! I have a movie clip button, however, once you click on it the output will say:
    ArgumentError: Error #2109: Frame label instance15 not found in scene Scene 1.
    at flash.display::MovieClip/gotoAndStop()
    at index_fla::MainTimeline/goLabel()
    i am new in flash and trying to learn as3.  i've looked at what error this is but i cant get my head around it.  what i m trying to do it if you click on a button, a swf file will load on the the page. but it is not loading and the error comes up!
    my code is:
    function goLabel(e:MouseEvent):void
    gotoAndStop(e.target.name);
    if anyone knows how to solve this problem please help! let me know if i need any other codes, but this should be it!
    thanks. i am about to go bald.

    Do you have a frame on your timeline that is labeled as "instance15"?
    The code you show will do nothing in the way of loading an swf.... gotoAndStop is a timeline command, not a file loading command.

  • I need help asap with my blackberry curve

    I bought a blackberry curve 9330 on ebay and when I plug it in to charge the red led comes on then goes off after a few seconds and it acts like it wants to turn on but doesnt any ideas at all please please help me anything is helpful!

    Connect the 9330 to your OEM wall outlet charger.
    Leave it charge a few hours.. and then,
    With the charger still connected, remove the battery and reinsert the battery...
    does it boot up properly?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need help ASAP with rendering problem. (CS 5.5)

    Beginning two days ago, rendering became a problem. I cannot complete rendering without freezing. All obvious troubleshooting has been done except perhaps to reinstall Premiere Pro.  Your thoughts?

    Welcome to the forum.
    When you say "rendering," do you mean Rendering for smoothest playback, or do you mean Export to an output file?
    Do you get any error messages?
    At what point on the Timeline, does the program quit?
    What is at that point in the Timeline?
    Good luck,
    Hunt

  • How do you overlap PDF's and finish with one PDF file? Need help ASAP

    how do you overlap PDF's and finish with one PDF file?
    Need help ASAP

    I'm not sure if you can do that with CreatePDF.  Try it; you got one free use when you sign up with Acrobat.com
    If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

  • User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    First, ask in the forum for the program you are using
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others

  • Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

    Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I  am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
    Pls explain me the steps for adding data from xml to B1 quotation step by step.
    thanks and regards
    Priya

    Hi,
    Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
    Thanks,
    Gordon

  • Need Help ASAP  my State tax form is in a PDF file and the attachment in my email says Please wait

    Need Help ASAP  my State tax form is in a PDF file and the attachment in my email says Please wait...
    I tried downloading updates like it said to but it still will not display the document.  How do I print the PDF file ASAP

    Can you give us a LOT more info?
    What email client? What version of Reader (I can only assume you even have Reader at this point)?
    Please wait? I'm sure it says more than that, right?
    Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
    Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
    Help us help you.

  • Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

    Hi experts!
    Got an error when extracting data with extractor 2lis_04_matnr.
    System says (short dump):
    DUMP TEXT START----
    Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
    Exception:   CX_SY_IMPORT_MISMATCH_ERROR
    Error when attempting to import object "MC04P_0MAT_TAB".
    The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
    An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure  "MCEX_BW_LO_API" "(FUNCTION)".                                                                             
    Since the caller of the procedure could not have expected this exception      
    to occur, the running program was terminated.                                
    The reason for the exception is:  When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
    DUMP TEXT END----
    Please, can someone explain me how to solve it? 
    Really need help ASAP!
    Thanks in advance,
    Jaume
    Message was edited by:
            Jaume Saumell
    Message was edited by:
            Jaume Saumell

    Hi,
    Check this note: 328181
    So you need to delete entries in SM13/LBWQ for application and also detup table content.
    And then refill teh set up table.
    If you are in production clear the entries by running collective run no of times for this application 04.
    With rgds,
    Anil Kumar Sharma .P

  • I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    Here is how to do it yourself.
    http://www.youtube.com/watch?v=2h53otOBTsI
    Here is how to send it to apple.
    http://www.apple.com/support/ipod/service/battery/
    Hope this helps!

Maybe you are looking for