Need help bad. Installed new HD and I dont want to lose my music on ipod

Can someone please help I had a HD crash and had to install a new HD. but when I plug my ipod into my computer it is telling me I have to reformat. I have allot of songs I purchsed and I dont want to lose them.
Is there a way to transfer playlists and songs with out formatting?
Please help
Thank you

Check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Similar Messages

I cant get itunes to update and when trying to download the new version it says error i dont want to lose the music i already have

help i tried to update my itunes last night and it wouldnt update now my itunes wont open it says theres an error so i have tried to download the new itunes and it still says error i dont want to lose what music i already have on my itunes

You're using a Mac computer?
You are always at risk of losing your music. If you are worried about it now too it means you don't have a backup. Get one. Soon.

I have two iphone wich are protected by two different password ! but when i woke up today ! i'v found that my two iphone ( iphone 5 et iphone 4 ) refuse my passwords of 4 numbers i have important data and i dont want to lose please help me ! thank you !

i have two iphone wich are protected by two different password ! but when i woke up today ! i'v found that my two iphone ( iphone 5 et iphone 4 ) refuse my passwords of 4 numbers i have important data and i dont want to lose please help me ! thank you !

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, or you don't have a backup, you will have to force it into recovery mode & restore as a new device.
See this for more info... http://support.apple.com/kb/HT1212

HT4623 i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect, Thanks Angela

i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect,
Thanks Angela

Your phone is in recovery mode. All your data are already gone.

I have forgotten my restrictions passcode and i dont want to lose any media on my iphone, or any apps, i am scared to back up my media for restore in future as these photos and videos mean a great deal to me, is there any way i could get around it? Thanks

I have forgotten my restrictions passcode and i dont want to lose any media on my iphone, or any apps, i am scared to back up my media for restore in future as these photos and videos mean a great deal to me, is there any way i could get around it? Thankyou if you can help; oh and last time i restored my iphone it didnt restore ALL the media only some and very improtant photos went missing :(

All media and apps on the device should already be in iTunes on the computer.
If you have forgotten the restrictions passcode, the ONLY option is to restore as new.
Then sync back any media, apps, contacts, etc back to the device.
You can not restore from backup as the restrictions passcode is included in the backup.

Today is last day of my lightroom trial and i dont want to lose book i am working on so i bought the photoshop/lightroom monthly package for 9.99. Where do i find the serial number to register lightroom?

today is last day of my lightroom trial and i dont want to lose book i am working on so i bought the photoshop/lightroom monthly package for 9.99. Where do i find the serial number to register lightroom?

There is no serial number for the CC version of LR.
You should uninstall the trial which is asking for a serial number – your catalog and images won’t be affected.
Then Quit the CC Desktop application, using Gear / Quit or right-click / Quit
Then restart the CC Desktop application.
Now you should have LR listed in the CC Desktop apps list with an Install button.

Im changing my notebook and i dont want to lose my applications in the iphone

Im changing my notebook and i dont want to lose my applications in the iphone 5, so is there any way that i can back up and then restore in another computer, because in the past i have to delete all the content
thanks!

See the instructions wjosten has posted in the user tips section here: https://discussions.apple.com/docs/DOC-3141

I need help badly with my ibook and palm pilot

Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA

I got a new computer and don't know how to get music from ipod touch to itunes library

I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library.

You need to transfer the iTunes folder from the old computer to the new one.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527

HELP I'm getting a blinking folder with a question mark at start up? Have been trying to fix this for 3 hours and I dont want to lose all my files by resetting it completely!!

I currently have Mavericks but my original OS X disk that I have I'm pretty sure is Mac OS X 10.6.6. I'm not great with computers but am usually able to fix problems I have had with mine in the past. I have reinstalled and reset my computer to factory settings before, but I am locked out of my computer completely & can't get to my files to save them & I really dont want to lose them. I was in Safari earlier opening a file, the page started to not respond & froze up my whole desktop so I did a hard shutdown & restarted my computer. I haven't been able to get back into my account ever since. If my only choice is to lose my files & reinstall everything, I need detailed instructions because I actually attempted to do this at first, out of desperation to fix my computer & the installer was asking me to select what disk I wanted to reinstall lion to yet I dont have a disk for that nor do I know what it exactly is asking of me? Please help

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I want to recover only c partition cause i have shrieked the c partition and i dont want to lose dat

Hi
i have hp pavilion dv6 6180se ..i have made the recovery media disks..then i shrinked the c partition to make E partition that used to store my data...now i want to recover my windows with recovery media disks without losing the E partition that i'v made..because there is a lot of data i dont want to lose and i can't move it to external storge.
please could you guide me how to make this procedure ?
Best regards
walid shahin
HP pavilion DV6
serial number {Removed for privacy}
PRODUCT NUMBER: QF459EA#ABV
INSTALLED WINDOWS: WINDOWS 7 64BIT SP1

Hi,
There is no option when using your Recovery Discs to reinstall that will allow you to keep a custom partition, so you'll have to do this another way. A possible option is described below.
First, click the Start Menu, open Computer and double-click Local Disk C - you should see a folder called swsetup. This will contain all the driver installers and practically all of the software installers for your notebook - back this up to an external device/media.
Next, create a retail installation disc yourself - just download the correct Disc Image ( this must be the same as the version you currently have ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.
Windows-7 sp1-iso-official-32-bit-and-64-bit
With reference to the guide on the link below, use this disc to perform the installation - when you get to Step 7, choose the Custom ( advanced ) option and select the C partition as the destination to install Windows.
Windows 7 Custom Installation.
Enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
When the installation has completed, use the installers in the swsetup folder to reinstall your drivers etc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Iphone 4 is stuck in recovery and i dont want to lose photos

my iphone is stuck in recovery and I dont want to do the restore on itunes. I dont want to lose my photos. What can I do.

You will need to restore your phone, just do the restore from your backup in itunes, assuming you have backed up your phone recently, and had your photos synced.

Hard Drive Crash - need help with choosing new drive and installation

My hard drive seems to have crashed. My computer froze, and when I tried to reboot, it got stuck at the startup screen. I started from the system CD, ran the disk repair utility, and it said it could not repair the disk. I ran Tech Tool Pro and it could not repair the disk. I tried to start up in Target disk mode while connected to my older G4 iMac (that I'm using now as my backup), and the disk would not mount. So I need some expert advice - I am assuming the hard drive is toast. I wish I could at least mount it in target disk mode to transfer files, but I haven't been able to do that. I was going to take it in for repair (or possibly buy a new computer), but after reading some of the posts here, I am thinking I could just replace the internal hard drive with a 3.5" SATA drive.
What I need to know is am I correct about this? And is this the right kind of drive for my iMac? Are there any specifications I need to be aware of when ordering a new drive? I downloaded the manual explaining how to replace the drive and it looks doable. I would appreciate any guidance as to choosing the new drive (specific brand names/models would be great), installing the drive, and tips for formatting, etc. Thanks in advance for your help!

Welcome to Discussions - any 3 1/2" SATA drive will be fine, go to [macsales.com] or [smalldog.com] or [newegg.com] and choose whichever drive fits your wallet. Most of them are reliable, I have heard of problems with Seagate and Hitachi, but there are always some failures with any brand. Make sure to get a good warranty.Instructions will come with the drive, but you can download them from [Apple|http://www.apple.com/support/manuals/imac> as well.

Need help with installing new hard drive in Satellite Pro M10

Hi All,
My hard disk died in my Satellite Pro M10 so I decided to fit another.
It fits fine in the caddy but just doesnt want to slot into place correctly as something seems to be stopping it.
Does the M10 only accept a certain make/model?
Also does anyone know what the highest capacity the M10 will accept?
Many thanks.
Regards
J

As far as I know there should not be problem at all. Take old and new HDD and compare the connectors. I hope they are the same. I can just imagine the new HD is not placed properly in the HDD bracket. Be sure the new one is placed as old one after removing it from the notebook.
About max HDD capacity there is no precise info and we can just speculate about it. Try to use search option on this forum. Maybe someone already wrote about HDD upgrade on Sat/Sat Pro M10.
The fact is that Satellite Pro is delivered with 30, 40 and 60 GB HDDs. How many GB has your new HDD?

I had my iphone and ipad synched to a old computer. Need to sync to new computer but don't want to lose data

I need help on how to sync to a new computer with out losing all of my music and apps off of my iphone and ipod.

iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527

Need help bad. Installed new HD and I dont want to lose my music on ipod

Similar Messages

Maybe you are looking for