NEED HELP BADLY ON SOME FUNNY ERROR

"This installation package could not be opened. Verify that the package exits and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
I NEED HELP! I TRY TO INSTALL BUT CANT! what happen anyone noe? can anyone pls help me out with this problem? this is what happen when i try to open the file and install. it just cant open and it will show me that msg on top

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT1926?viewlocale=en_US

Similar Messages

  • Adobe reader not working. Needs help badly!!

    I get this error  message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
    do I fix this. Not happy!!
    My error messge I get. I need help badly to fox this !!
    Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
    has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    Can anybody Please help  me !!!!!!!!!!!!!!!!!!!!!!!!!!
    Michael Ladd and email is [removed]

    Adobe Reader cannot open ZIP files. It only opens PDF files.

  • I need help getting past the installation error "windows cannot fint TEMP file"

    I need help getting past the installation error "windows cannot find TEMP file"

    Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
    http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
    http://www.compusa.com/products/product_info.asp?product_code=339900#ts
    http://www.xpcgear.com/ide2sata.html
    http://www.ubuyitdirect.com/-p-1045.html?currency=USD
    http://www.satasite.com/sata-ide-converter.htm
    http://www.pcgears.com/default.aspx?oid=187150
     

  • I need help badly with my ibook and palm pilot

    Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

    I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
    At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
    I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
    -NA

  • HT4009 Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

    Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

    You need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Portege M900 cannot detect/read from DVD drive - Need help badly!

    I have this problem with Portege M900. My laptop cannot read from the DVD drive.
    Does any one has similar problem? Need help badly as I cannot play my game from the CD.

    Test if the dvd drive is seated correctly in the compuer, I had a computer the dvd drive did not work until I removed one of the on back of the laptop (machine was a Toshiba different model) and then I was able to seat the dvd drive correctly.

  • Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

    Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

    Hi watanabei,
    Please see Countries where ExportPDF is available for purchase. - Adobe Community. It's necessary to have a credit card billing address in one of the countries listed in this document. If ExportPDF is unavailable to you, you may want to consider an Acrobat subscription, which would also allow you to convert PDF files to Word and other format. For more information, see www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • My ipad can't connect to itunes store.. need help badly :(

    my ipad can't connect to itunes store.. need help badly :(

    have you tried quiting the app, ie removing it from the multitasking bar also, and then retrying it? Failing that, flick the ipad into airplane mode for a minute, then flick it back, wait for your wifi to connect then try again.

  • Need help badly!! how can i use the front camera i...

    guys, i need help with the front camera of my device
    how can i enable the front camera of nokia N900 to shoot photos or videos,
    this problem is really bugging me...
    need help badly...

    You can't.. it is terrible..
    the only app that really uses it is mirror
    Open this link on your phone to install mirror
    http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
    the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

  • Need help with Java always get error

    hey guys need help
    this the problem i get :
    I go to certain websites and I get this error with firefox.
    This Site requires that JavaScript be enabled.
    It is enabled.
    This is the one of the errors in java script console with firefox.
    Error: [Exception... "'Component does not have requested interface' when calling method: [nsIInterfaceRequestor::getInterface]" nsresult: "0x80004002 (NS_NOINTERFACE)" location: "<unknown>" data: no]
    I have installed the java script from there home site and did a test and says everything is fine. Any ideas?
    please help

    Hi 49ers,
    Sorry not to have any real idea of how to help you out here, but this is a Java forum, not JavaScript.
    Some Firefox expert may stumble across your post and be able to offer some advice (I hope they do) but this isn't really the best place to post such questions.
    Try here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3
    Good luck!
    Chris.

  • Hi, I'm new. Need help bad!

    Fixed myself.
    Edited by: jpechart on Oct 17, 2009 7:16 PM

    no body can help me,not with the way you are posting your questions, no. You first say you need help "urgently". If you've spent any time on these forums, you should know that the only thing "urgently" does is piss off many of the smarter programmers, greatly diminishing your chances of getting any help whatsoever. Your second problem is that you are expecting us to drop everything and help you, to put in tremendous and prompt effort, and yet you show no effort to help us. You don't use code tags, so we really can't read your code, you say a constructor "doesn't work" and yet you don't say how it doesn't work, how it's supposed to work, what error messages you've gotten,....
    I mean come on here. If you want help from us, you have to put in some work on this post first. We are volunteers, and your job is to make our job of helping you as easily as possible. You've failed that. Please try again, and we'll see.

  • I need help with Mavericks Server: an error occurred while configuring your server.  I

    I need help with Mavricks Server, I get the following: an error occurred while configuring your server.  I have deleted the Server.app several times along with the associated com.apple and Server folder.  Any more help would be appreciated.

    There are usually some log files around, related to the installation.  See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

  • IMAC NOT STARTING! I NEED HELP BADLY!

    so one day i had left with my imac G5 on, maybe some programs open, and while i was away our power went out, so the imac was turned off without correctly powering down obviously, when i turned it back on it took forever and never even reached the screen where you sign into an account...
    it stays on this blue screen forever and never starts up all the way. i tried putting the install disk in and it ignores it, it runs or atleast i can hear it trying to, but nothing happens. ive correctly turned it off, pushing the button until it shuts down, but ntohing works. i cant get on my mac! this *****! i need help and asap.
    HELP ME PLEASE!
    -Hayley
    Message title was edited by: Host

    So i have the back off now, and i see how that button works, i pressed it once with the power cord out, just messing around, so now i dont know what im suppose to do...
    i put the power cord in and this green light shows up inside, but then i dont know how to power it up with the back off, while pressing that button, i dont even know, i need help!
    please help!
    lol
    -Hayley

  • Need help with Acrobat Xi installation error

    Here is the error I am getting...
    Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 3 error(s)    ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab.  Verify that the file exists and that you can access it.  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab.  Verify that the file exists and that you can access it.  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603  ------------------------------------------------------------------------------------- "Windows 7.  Have tried installation several times.  Need help now, considering I am paying for this service!

    Thank you for the replies. 
    Jeff, I will check that link and try what is suggests.
    Bill, to answer your questions...
    1. This is a CC installation.
    2. Yes, I am logged in as the admin and I have no anti-virus other than Microsoft Essentials enabled.
    3. This is a download installation.
    To give even more info that might help, I am using a Windows 7 machine with more than enough capability to run CC.  I had installed Photoshop, Illustrator, among other apps successfully.  I then tried the Acrobat XI installation.  Acrobat XI downloaded and extracted, but when it started installing it froze around 50% and then I received the installation failed error from Windows.  Once that was confirmed the CC install progress finishes but shows failure.  The More Info reveals the error I pasted in above.  Afterward, none of the CC apps worked properly and had to be uninstalled.  So, next I installed the CC downloader and tried to start installing Acrobat XI first but the same error occurred.  That's when I got frustrated and posted my original message.  My limited knowledge leads me to think the error issue lies in the AcroPro.msi file but I have no idea what that is or how to find, correct, or install it.
    Thanks again for any help you can provide.  I'm really frustrated that I'm paying for something that I can't use.

  • Need help bad, screen problem

    heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
    i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
    been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
    i need help here
    Last edited by ssl6 (2007-09-16 07:00:40)

    nvm, i just deleted the xorg.conf and rebooted, its fine now
    edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
    ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
    well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    RgbPath "/usr/lib/X11/rgb"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 30.0 - 110.0
    VertRefresh 50.0 - 150.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "sun"
    HorizSync 31.5 - 82.0
    VertRefresh 50.0 - 90.0
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    Identifier "geforce"
    Driver "nvidia"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "geforce"
    Monitor "sun"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "True"
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    any ideas here?
    Last edited by ssl6 (2007-09-16 07:53:48)

Maybe you are looking for