Need Help: BBZ10 Stuck on Usb Moniter Screen Unable to Boot / Start

Hi,
I recently purchased a Balckberry Z10, while trying to transfer my data from my existing blackberry I accidently reset my device to factory setting. now it is stuck on the usb moniter screen.
I  have tried reloading the phone using Link but it keeps on showing me a message: Unable to reload due to error: No Update Available.
I am using a Mac.
Need Help!

So this is the problem and the resolution is this.. But unfortunately it is not working because I keep on getting this message that no update available.

Similar Messages

  • Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    When you contacted the modem manufaturer what did they have to say?

  • Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my SL

    Hi...Im in needs of help in my new OS Mac World.Had my Logic Pro 9(9.0.2) install in my Snow Leopard(10.6.3).Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my Snow Leopard.Just a real basic audio interface that works with my Macbook pro Specification.You're help will be much more appreciated..
    Best Regards:RatzyMazzy

    In any case I would suggest to get an audio interface which is *Core Audio* compatible. This means that you just need to plug it in and it will work with OS X’s integrated driver. I once had an M-Audio interface which needed its own driver and it had latency problems because of them. I am currently using the EDIROL FA-66 with 10.6.3 on my MacBook Pro. It still works flawlessly and has worked without problems in the past with 10.4 and 10.5, too. Here is how it looks like: http://www.rolandus.com/products/productdetails.php?ProductId=731
    I have also heard good things about the FireWire interfaces from Presonus, like the FireBox.
    Björn

  • I need help getting my OS X Mavricks download to work and start downloading but it wont work

    i need help getting my OS X Mavricks download to work and start downloading but it wont work

    Contact http://www.apple.com/support/mac/app-store/contact/. They're responsible for getting this abysmal delivery system to work.

  • Urgently, Help. Stuck on this issue when unable to figure out what methods to use...

    Urgently, Help. Stuck on this issue when unable to figure out what methods to use...
    Attachments:
    enquiry.jpg ‏101 KB

    so sorry about that
    I have an example attached.
    How to control the pause function automatic control by the system timing? when only reaches 0000hrs, pause function execute?
    Attachments:
    pause_button.vi ‏16 KB

  • My phone iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    My iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    Try a reset.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

  • My iPhone 4 is stuck on USB/iTunes screen. Please help!

    I tried updating my iPhone 4 via iTunes and received a error message and now my phone screen is stuck on the USB/iTunes screen. I have tried plugging, unplugging, starting, restarting, now iTunes doesn't even recognize the device. Please Help!

    Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button, for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then click the Restore button of iTunes.
    If any Error Messages are given, write then down so you can look up the cause and solution.
    If you still have Warranty or AppleCare, you may have to take to Apple for resolution. Make Genius Reservation for shorter wait time.

  • Help! Stuck on white/grey screen apple logo spinning wheel

    Hi, I wonder if anyone can help me?
    I have a MacBook pro snow leopard 10.6 It won't start up it freezes on the white/grey screen with the apple logo. I have tried it in safe mode it has the bar underneath as it loads up to half way it goes off & the spinning wheel just carries on spinning forever!
    I have tried cmd & v typed in a few things that I saw other people do then on the black screen white text the page is full of  Disk0s2: I/O Error   tried rebooting but same thing happens doesn't start up.
    Then I put my mac os x snow leopard 10.6.3 installation, features and refinements disc in but still nothing! I'm stuck anybody know what to do?
    Thanks in advance if you can help me.

    If it won't boot with the just the c key held down off the disk, it could mean there is a firmware password set.
    If it won't boot off the disk with just the option/alt key held down, that  means firmware has been wiped if all you see is a white screen.
    If it has a firmware password, it should have asked you for it with a screen with a lock icon on it.
    However it also could mean there is a hardware problem or the 10.6 disk is dirty, scratched, defective or not from Apple (warz).
    Or your keyboard is bad or your using a external one and not the built in keyboard.
    I think you might have to look into the possibility your EFI firmware has been hosed.
    See this section of my User Tip here:  ..Step by Step to fix your Mac
    Need machine/operating system identification help?
    Find the serial number, thus the model number and thus gives the operating system that originally came with the machine. However gives not what operating system version the boot drive was later upgraded to. Do not use older OS X verisons to repair newer verisons. It is possible to use the original operating system version installed on another boot drive to recover files from a later operating system non-booting drive.
    https://support.apple.com/kb/HT1159#MacBook_Pro   https://support.apple.com/kb/HT1349
    https://support.apple.com/kb/HT1559   http://www.everymac.com/ultimate-mac-lookup/
    If the computer just ignores the at boot key commands (without showing the firmware password request) especially if you boot to a white screen (no initial boot screen), it might be your EFI firmware stored in NVRAM memory has been wiped. EFI is like a powerful operating system type firmware that loads before OS X or Windows in Bootcamp loads, programs can be installed in EFI, even malicious ones. (why it's very important to trust the source of your instaled software)
    To restore EFI you need to use the identification links above to find the exact model of your machine. Then use another computer to download the correct EFI firmware from this Apple.
    https://support.apple.com/kb/HT1237
    Then follow these instructions to burn it to a cd or USB (untested) and apply it to the non-booting Mac. It likley will take 2 reboots for it to take hold and return the at boot key commands.
    https://support.apple.com/kb/HT2213
    ..Step by Step to fix your Mac

  • [LENOVE G460] Stuck at Lenovo Logo Screen when a Boot-able USB plugged in

    The subject says it all.
    I was thinking of doing a Live Install of a Linux Distribution using a Bootable USB.
    So I plugged the Boot-able USB and then Power the Laptopn ON and then press F2 to enter the BIOS SETUP
    But even after a few minutes the screen doesn't even budge from the Lenovo Logo... It just says "Entering Setup..."
    First I thought something was wrong with my Boot-able USB so I checked it by using another laptop and TADA!!!! I managed to enter the bios setup screen, change the boot order and then start the Linux Installation without any problem.
    And then I decided to do it again on the Lenovo G460 and then... The same Stuck at The Lenovo Logo Screen happened again.
    Could Anyone shed some light on this problem?
    Thanks XD

    Hi Warnbroom,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
    Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
    Hope this helps. Do post back if issue persists!
    Best regards,   
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPod touch stuck on USB connect screen but not recognized by iTunes

    I downloaded the update for my iPod via iTunes but when the update attempted to install on the iPod, I received a message that the update failed. Now, my iPod is stuck on the USB connect screen (with the image of a cord below an arrow pointing to the iTunes logo). Every other thread says to connect to iTunes and attempt to reset the device (off and home button for several seconds) so I can restore it through iTunes, but even if I do that, it fails to connect to iTunes. Last time I had problems connecting to iTunes I downloaded the update through the iPod itself but seeing as I can't get off the USB connect screen, downloading it from the iPod is impossible. How can I get my iPod working again? Either getting it off the frozen screen so I can download the update, or getting my computer to recognize it so I can restore? Last time it wouldn't connect to iTunes (when it wasn't frozen) the computer still recognized it but now it does not. (I'm on a Windows 8 laptop)

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I need help with my K7N2G-ILSR Black screen

    hey!
    I need help with my Mainboard!
    All the time when i want to start it it doesn't boot. You can listen to the noise of the fan and it is working but only black screen, also the LED says that the Ram is damaged red-green-red-red!
    I have an Athlon XP 2400+
    Volcano 9 Fan
    512MB ram Kingston PC2700
    512MB Ram Infineon PC2700
    I read that the board doesn't support Kingston the first time and also i set the jumpers cleared CMOS and put the battery out. Also I put the Ram in different Dimms but still the same error.
    The other things what i have aren't really important just that i have an enermax 431Watt. MSI wrote me that i have to put out the mainboard out of the case but why should i do this, the case is open right now and normally that shouldn't change anything. I read also some posts here and about new Ram but maybe there is someone who knows whats going on!
    thanks for the reply to everyone
    Regards
    Jan(It's german say it like Yan)

    i can't even look on the screen because the screen is black, and how can I change the timings manualy from ram? man, i never heard about that I mean it's easy to overclock a cpu but how are you changing the timings of the Ram! If u can give me a webpage snf i will lock for it, or just descibe me how to do it, thanks a lot for the replies!

  • Need help im stuck right now

    Ok so I have built a function that will increase in increments that is specify and I am outputting it to a device to control it. Now this is the part i need help with I want to to hold at the setpoint that I can specify for a period of time then slowly decrease can anyone help im usisng labview 7.1
    Attachments:
    Niks Test.vi ‏167 KB

    In that case, it can be greatly simplified.
    The "Add 0" function obviously isn't doing you any good.
    If you don't need it for timing, you can remove the Wait function.
    The "Add 1" function and feedback node can be replaced with the "i" (iteration terminal).
    A good rule of thumb for loops is: "If you know how many times it will run before it starts, use a For Loop.  If the number of times it runs is uncertain, use a While Loop."
    It looks to me like you want to generate an array that goes from Init+0.001 to SetPoint by steps of 0.001.  The attached VI will do this. 
    I realize this doesn't solve your problem yet, but I think it puts us a step towards figuring out what to do next.
    Can you check this out and tell us what else is needed?
    Attachments:
    Niks%20Test[1].vi ‏8 KB

  • Hp probook 4520s stuck at hp logo screen without shoing boot options

    while battery is present, hp probook 4520s stuck at hp logo screen without showing any boot options .   Without battery , by connecting AC adapter, it works normally

     If your notebook is new enough to have the UEFI diagnostics installed run the barttery test there instead. There is a System Diagnostic UEFI version 3.7.0 update available for your notebook. Install that one if you haven't already done so.
    is your notebook still in warranty? HP product warranty status check web page
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need help installing my graphics driver in windows vista via boot camp

    New to mac so first time on forum as well.
    Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
    I am currently using below.
    Mac mini Mid 2011 processor 2.5 GHz Intel Core it
    Memory 4 GB 1333 Mhz DDR3
    Graphics AMD Radeon HD 6630M 256 MB
    Software Mac OS X Lion 10.7.5
    Installing windows vista home premium 32 bit
    I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
    When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
    Advise?
    I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
    What is the driver i need to install to get these games working? What do I need to do or what am I missing???
    Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
    Any and all responses will be greatly appreciated i have been at this everyday for hours.

    Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

  • I need help I cant connect on wifi just "unable to join the network"

    I have problem to my WiFi connection
    I cant connect on WiFi home
    and i have MSG unable to join the network
    but my Iphone this is old iPhone 3
    I need help how can I fix it and i don't know if my phone or the router the problem.
    Pls help give me a easy answer and how i solve it.

    Hello, thanks for your answer, I try that reset, nothing change but my WiFi router when I off it my WiFi it is back after a minute my WiFi it doesn't  work again. I think my router WiFi is the problem because I try everything apple community they suggestion still not working.

Maybe you are looking for