Need Help Blocking Xbox Live Ports on ES4200

Can someone instruct me on best method for blocking access to Xbox Live on my ES4200? I want to prevent my niece/nephew from hogging bandwidth and/or limit/restrict their usage.  Please advise.
Thank you,
Nicky

Hi Nicky, is your router E4200 or ES4200? If your Xbox is connected wirelessly, all you need to do is access the setup page of the router. Look for this page http://ui.linksys.com/files/E4200/1.0.00/Status_Lan.html and click the DHCP client table option.
You will find the MAC address of your Xbox on the list, just take note of it and go this tab on the page http://ui.linksys.com/files/E4200/1.0.00/Wireless_MAC1.html. Once you're there, enable the Wireless Mac Filter and select the option Prevent. Input the Mac address of the Xbox on the list and make sure to save the settings. Hope this will help you. Update us!

Similar Messages

  • Need help w/ setting up ports to run a server for America's Army

    Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
    Q: How do I run my own server?
    A: Quick and dirty server info:
    1. Edit RunServer.bat to change the map.
    2. Run RunServer.bat
    Or:
    server.exe LAN MAPNAME.aao (Host a LAN game)
    server.exe global MAPNAME.aao (Host a Public game)
    Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
    There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
    [Engine.GameEngine]
    ServerActors=Andromeda.AndromedaMBS
    [Andromeda.Andromeda]
    GameServerIp=
    Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
    If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
    [Andromeda.AndromedaMBS]
    QueryPort=20025
    Punkbuster user fix correction.
    If [Engine.GameEngine] block has been changed to read as below:
    [Engine.GameEngine]
    ServerActors=IPDrv.AndromedaMBS
    Please add the following block to your INI file:
    [IpDrv.AndromedaMBS]
    QueryPort=20025
    (Last Updated: 2006-04-20)

    Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
    Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

  • I need help blocking outgoing traffic.

    I need to block all outgoing traffic on port 8008 to a specific IP address. I have been told by the guys at the genius bar that this can be done but I can't make it happen. This is imperative to my work. I am currently being blacklisted by my web host every ten minutes because something which can't be identified on our network is probing our web hosts IP using port 8008. I know this can be done on other wireless routers but I can't find how to do it on my 802.11n Extreme. There are several advantages to the extreme and I would like to continue to use it but I can't if I can't block that port.
    Can someone please help me?

    That's completely stupid. Why on earth does apple even make a router if they are not capable of keeping it up to par with other routers on the market. I admit it has several neat features but they are useless if I can't use it. Guess I'll have to use a cheapo Netgear router. They will at least allow me to block a port if I so desire.

  • Need help for SB Live

    Need help for SB Li've CT4850 driver for windows 7. Thanks

    Hi,
    I don't think there is a Windows 7 driver for this model. If you just purchased this card, I suggest you take it back to store for something newer.

  • HT201304 i need help blocking safari for explicit material for my iphone 4s. any ideas

    i really need help setting up a parental control of some kind on a iphone 4s for mt 12 year old son any help would be appreciated.

    You can't restrict Safari on the iPhone other than to turn it off.  My recommendation is that you turn it off in restrictions, then use an alternate browser from the app store that offers this capability, such as McGruff Safeguard Browser.

  • I need port forwarding help for xbox live. I have a WRT54G router.

    I forwarded the ports but it still says I have a moderate NAT. I think I need to get a static IP address on my PC and I know how but what DNS servers do I put in. When I made my static IP the internet didn't work and I figured it was the wrong DNS servers. Do I also have to switch anything in the router settings? Like switch from DHCP to static IP? Any help would be appreciated.
    PS. I know nothing about routers and will need to be told where to switch things.
    TYTY

    in order to open the ports for the x-box , u need to assign a static ip address on the x-box itself and not the pc.....it should be anywhere in between the following range
    192.168.1.2 to 192.168.1.99 or
    192.168.1.150 to 192.168.1.254
    the dns numbers would be the one from the status page on the router ui...to access the router ui , you need to type http://192.168.1.1 .. logon using "admin" password......on the setup page , adjust the mtu settings to 1365.....under "applications and gaming" , open ports 88 and 3074 and give the ip address of the x-box...

  • Need Help Blocking Port 53

    I hava an Actiontec MI424WR Gen2 wireless router. I also have a family member who is addicted to video games. To stop gaming acces I programmed my router to route all traffic thru OpenDNS server. In OpenDNS I selected blocking of Games. After this failed, OpenDNS said the only solution is to force ALL my network traffic thru OpenDNS servers by blocking port 53. But I am not a geek and need steo by step instructions. Please help.

    You can use the parental controls in the Actiontec router to block all internet access for a particular computer (or groups of computers) on a schedule.  This may be easier than mucking around with OpenDNS.  You could even unplug the router if you don't mind loosing access for everyone in your household.
    However, If your game playing family member has more tech skills then you, you may be fighting a loosing battle.  If one of your neighbors has an open WiFi network or is willing to help your family member, you'll loose all technical controls.
    If the game player is a youth, you may be better off with more traditional methods such as locating the gaming computer in a common area so it is subject to supervision at all times.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Xbox Live Port Setttings

    I have a wireless network set-up in my home which allows me to connect with my ibook or my xbox 360.
    In the past i've always had a firewall activated & gamed no probs but recently when trying to speak to friends, or accept game invites from them on live, I keep getting kicked off!! I can join a player or ranked match no probs but when i try to play or speak with my friends - NO JOY!!
    I've heard that I have to enable certain ports which will allow me to play without compromising my security but I don't have a clue where to start!
    Has anybody else had probs like this? Or does anyone know what ports I need to enable?
    My old provider was via cable (ntl) but i recently switched to a standard phone line (bt), if this makes a difference?
    This prob seem intermitent as sometimes everythings fine & then the rest of the time it's 'as above' !!
    The only service I already have enable is FTP Access as this seems to help with downloading via bittorrent.
    PLEASE HELP?! CHEERS.....
    iBook G4   Mac OS X (10.4.8)  

    Xbox and xbox 360 uses 3 ports they are as follows: #1=UDP88  #2=UDP3074  #3=TCP3074.  that is the port setting for the xbox and xbox 360.  Be sure the MTU is set for 1365 and if you are using Xbox 360 wireless change the channel to9 and 11 .  Make sure the becond interval is 50 and reduce the RTS and Fragmentation Threhold by fourty each.

  • Need help setting XBOX 360 to have bandwidth priority over my laptop

    I have a WRT54GS wireless router.  I have a laptop connected wirelessly through it, and an XBOX 360 wired into it.  If I use my laptop at the same time as my XBOX then my laptops connection works great, but my XBOX lags hardcore.  I need to figure out how to set the router to send most of my bandwdith to the XBOX and not as much to the computer.  I would rather the computer lag than the XBOX.  I don't know what all info I need to provide in order to get the answers that I seek, but if anyone can provide me with any explanation then I will be able to give you more info about my stuff.  Thanks

    1. Log into your router's web management tool by pointing your internet browser to 192.168.1.1 (default username: admin password: admin)
    2. Click on the "Applications and Gaming" tag
    3. Click on the "QOS" subtab
    4.  Ensure Internet Access Priority is Enabled
    5. Pull down the "Category" menu box
    5a. If you know the MAC address of the Xbox select "MAC Address"
    5b. If you know the port number the xbox is plugged into the router,  select "Ethernet Port"
    6.Input the information in the box below the pull down menu and setthe priority to high
    7. Save your settings
    *** PLEASE NOTE ****
    Network performance may be degraded for other devices while you are using the network on the xbox

  • I need help with my Live! cam video im

    My camera has problems with showing the picture. The video is deformed, the video background shines through the view.What can I do with that? How can I turn the background off
    Ohh, in the Live ! cam center there are questionmarks almost on every button.What can help?

    i have a problem. When i try to use a backround (like ayers rock) in Advanced Video FX, I do what i am supposed to do, i capture the backround but it only half works! I have half of my bedroom in the picture aswell!

  • NEED HELP BLOCKING A CALL

    I keep getting a call from a 9 digit number, call doesn't come through but phone rings until I answer, can't block it because it's only 9 numbers, please help ! They are waking me, annoying me, getting very frustrated, can't get in touch w/Verizon people !

        That sounds very annoying lluscher! Please try tapping the i in the circle on the right side of that number from your call log, then scroll down and tap block number. This has worked for me with any number. I have the latest iOS version 7.1, if you don't have this version please update your software and then try the above steps. Keep us posted.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Need Help installing webcam live ultra........PLEASE

    I can install the software, but the cam is not working....... I'm getting a message: download win xp hotfix kb822603 or install usb 2.0......can anyone help me please.... I can access the software but my cam is NOT working......thanks for your input PS... I have win xp, webcam live ultra you can post or email me direct @ [email protected] THANKS AGAIN FOR YOUR HELP!!!!!!!

    Did you install at least SP for your Windows XP? Also, have you try downloading the hotfix that the error message mention. If not give it a try since it's meant for correcting some issue of USB with SP.
    Jason

  • Need help with Soundblaster Live! 5.1 and King Theatre 5.1 speake

    Hi,
    First time ost and need some help.
    Ok i bought a nice Soundblaster Li've! 5. sound card around a month ago. 2 days ago i bought myself som speakers "Kingtheatre 5." I doubt it any of you have ever heard of this brand, i bought speakers from local shop. Ok this is where the problems start. When i try to connect the speakers i can only ever get 4 out of 5 satelites to work and the subwoofer. If i change the wiring around, i will only ever have 4 speakers working at a time. Can anyone help me with the connecting. In the back of the subwoofer i have 3 cables, one says "Centre/subwoofer" the other says "Input | surround L/R" with the word Input on the side of it, and the last one says "Front L/R(Stereo)". At the back of my soundcard i have the following colour plug ins (sorry im only 4, im not used to technical terms) Ok from left to right black, green,pink(mic),blue and a orange/brownie colour. Can anyone help with the pluging it part.
    Cheers, sorry about the long post.

    Dooda,
    If you can post a link for the layout diagram of your speaker system then it will be great.
    From your description, you could try this. Connect the audio cable from subwoofer "Front L/R(Stereo)" to Green jack on the sound card, "Input | surround L/R" to the Black jack and "Centre/subwoofer" to the Orange jack on the sound card.
    Do a speaker test via the Creative Surround Mixer application.
    Jason

  • NEED HELP WITH OXYGEN MIDI PORT ISSUE

    O.K I AM SO FRUSTRATED CAN SOMEONE PLEASE PLEASE HELP ME! HERE GOES:
    I'm running Logic 9 on new Macbook Pro. I use the oxygen v2 25 key midi keyboard controller with no problem. The Mrs. buys me a new OXYGEN (BLUE)61 Key MIDI KEYBOARD for Chrsitmas. When I use the oxygen61 it plays but when I press play on Logic 9 and run my track the message comes up
    Device "Oxygen" is assigned to MIDI Port Oxygen 61 which is not present.
    Please ensure taht all MIDI settings are connected and switched on. if this is the case please check the mdi port setting of device "OXYGEN". If this is correct, click "reset All Midi Drivers" in Preferences > MIDI> General.
    I reset and still the same problem.
    Please HELP!!!!!!!!!!
    Thanks guys all the best,
    Drew

    Hey,
    Thanks for the help but I had already done that.problem is I can play the keys when I pressplay on the track it's stops the message comes up and the board loses power.
    But thanksfor the reponsegladly appreciated.
    All the ebst

  • Need help blocking poker website

    is there any programs that will stop websites like party poker from popping up, i use safari and chrome to browse the internet, and when i think i've blocked these sites they pop up. Any help would be much appreciated
    Frank

    That's ok. Just wanted to make sure.
    From your Safari menu bar click Safari / Block Pop-Up Windows.
    See if that helps.
    If not, try GlimmerBlocker. It's now compatible with v10.7 and free.
    http://glimmerblocker.org/
    I've had good luck with GlimmerBlocker for several years. You can access the settings from System Preferences / Other / Glimmer Blocker.

Maybe you are looking for