Need help building .exe when using 3D correlation surface

When trying to build an executable with the 3D correlation surface VI, I receive an error . . .
Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Item_OnDoProperties.vi -> AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: Generic file I/O error.
9/10/2009 9:25:09 AM
I receive the same error when creating a new project and inserting the NI example program (3D Contour Plot.vi) into the project (it is the only file in the project).
thank you.

Hi PikesPeakLV,
I was able to build an application using the example that you mentioned in LV 2009 on Windows XP SP3. I would like to know more details to figure out whats incorrect.
What are the NI Softwares installed in your system and what licenses you have?
Which Operating System you're using?
What is the location where you're attempting to store the build in? (Are you changing the default location?)
Is there any settings that you are using apart from the default settings?

Similar Messages

Need help please. When using Safari while banking online I cannot get rid of Pop ups although I have ticket no Pop ups. Any ideas ?

Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.

Get Adblock or GlimmerBlocker.

Building executables when using LV and MATRIXx

Hi!
With respect to Building executables when using LV and MATRIXx, I need clarification on following:
1) Pre-requisites to use MATRIXx? We have LV 7.1 FDS with application builder.
2) Licensing scheme? We would like to have MATRIX on 3 development stations.
3) Can we build stand alone executables when using MATRIXx with LV?
4) Do we need to purchase any addon to achieve (3) ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
Before I answer your questions, I am curious to know what you have in mind for the stand alone executables you are interested in building. It may help me to know a little more detail about your plans. Depending on your application, some of these answers may or may not be applicable. In any case, here are answers to your questions:
1) There are no prerequisites for using MATRIXx. LabVIEW is not required. However, with LabVIEW FDS, you do have an Xmath Script node located in the Functions > All Functions > Analyze > Mathematics > Formula palette. This node can be used to call Xmath scripts from LabVIEW.
Note: To use the Xmath Script node successfully, you will want to install LabVIEW 7.1.1 Maintenance Release. Refer to KnowledgeBase 300A6NDT: How Can I Resolve MATLAB and Xmath Script Node Issues in LabVIEW?
2) There are two licensing options for MATRIXx: node-locked and floating (concurrent). A node-locked license is restricted to a specific node and can be installed and used on that single computer. A floating (concurrent) license allows use of the product by a specified number of concurrent users on any computer on a local area network that includes a server running a single license manager. For more information, follow the link to the MATRIXx Price List from Products and Services: MATRIXx.
3) There are two ways you might build executables when using MATRIXx and LabVIEW. One way uses a component of MATRIXx to automatically generate C code. AutoCode is a component of MATRIXx that allows the user to turn system models into C code. This C code can then be compiled into an EXE or DLL. If built into a DLL, LabVIEW can be used to call the DLL. A more thorough explanation of this is provided in Developer Zone Tutorial: Running MATRIXx SystemBuild Models in LabVIEW/LabVIEW Real-Time.
Another way that may work is to build an executable from a LabVIEW VI that uses an Xmath Script Node. Any target machine running this executable would need to have Xmath and the LabVIEW Run-Time Engine installed.
4) No other add-ons are needed for (3). Do be sure to refer to the note following the answer to (1).
Regards,
Eric M.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

I need help from chile and use a language translator to write and not turn my iphone4

I need help from chile and use a language translator to write and not turn my iphone4

http://support.apple.com/kb/TS3281
Not turn on

Need Help Understanding How To Use iMessage Between Two iPhones

I have an iPhone 4 and my wife an iPhone 3GS. We both have iOS 5, but I have discovered something about iMessage I need to make sure I understand correctly. As I understand it iMessage can send text even if our voice carrier service is unavailable. I tend to loose signal inside the building I work in. I usually can get texts in and out, but sometimes not. But in testing the two phones sending iMessages, I've noticed is that if I have one of the phones with iMessage turned on and the other with iMessage turned off, the two phones will not be able to exchange text. Is that how it's supposed to work? Even though one of these phones can receive an iMessage doesn't mean the other one send one back. Can't the system detect when one phone is connected and another one not, and the one that is not gets sent SMS messages instead? I don't want to try to send my wife an iMessage because I can't get a voice signal in my building, but her have iMessages turned off and not able to get any messages from me, iMessage or SMS. I guess I need help better understanding how this actually works between the two phones so I can always get texts back and forth between my wife and I. My other misgiving is that this iMessage thing consumes my data limit. My wife gets unlimited because she had her phone before the limits were imposed, but I got on board after, so I am hesitant to use iMessage all the time because of it. I have no intention to send picture mail through iMessage, but the thing is if I wanted to switch to SMS to send picture mail to save data, but my wife's phone is set to iMessage, she won't get it. If this is how this thing is supposed to work, I'm not really impressed. Some insight would be appreciated

I think you are making this way too complicated. Why are you turning iMessage off? If you are at your office connect to the WiFi there and send your wife messages that way (unless your office is blocking the port iMessage uses). When possible the two phones will use iMessage but will revert to SMS is iMessage is not available if that option is set that way.
I would not worry about using up your data plan if you have the 2GB, text iMessages are going to be very small and MMS (picture) ones are not very large either. Unless you are sending hundreds of picture iMessages a day you will have a hard time using up your data.
If you are near an Apple Store you should explore signing up for an intro iPhone course and have them run through iMessage options.

Need Help - Custom Identity Assertor using MBenMaker known issue CR207766

I am facing below WL 9 knwon issue in WebLogic 10. How to resolve it , do I need to create constructor in identity Asserter IMPL classes ? If yes, what goes inside constructor. Pls help as there is no reference for this issue in WebLog release after WL 9. Below is as in WL 9 site at
http://edocs.bea.com/wls/docs90/issues/known_resolved.html
CR207766
The intermediate files that the WebLogic Server 9.0 BETA MBeanMaker generates erroneously includes two types of constructors for you to complete. One type is based on ModelMBean and the other type is based on RequiredModelMBean.
The constructors that are based on ModelMBean will no longer be generated or supported after this Beta release.
Workaround:
When using MBeanMaker to create MBeans for custom security providers, supply content only for the constructors that are based on RequiredModelMBean.

Not related to the issue. How do you build your project containing provider? Do you use workshop IDE build? Thanks

Need help in english to use my iphone4 with orange.fr in france

I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

Hello
The whole story is a little bit confusing for me. So lets see what you wrote:
>... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
> So now I have a computer I can't use
Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
> I have also bought the product recovery disks from toshiba's backup media site
But why if you already have recovery disc that you have used at the beginning of the whole story?
What you need to do is to use this original disc for OS installation.
-start your notebook and press F12 several times to enter BOOT menu
-when the menu is shown put recovery disc into ODD
-select CD/DVD drive in the menu and press ENTER
-follow the menu on the screen
After recovery image installation you will have factory settings again and everything should be OK.
More questions?

Build error when using custom error codes

When I try to build my application using custom error codes I receive the following error:
Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.

Hi Donovan,
The attached project is giving me the error previously discussed. Thanks for your help.
Attachments:
BuildError.zip ‏10 KB

Tab Control Property Node gives a build error when used in a VI for LabVIEW PDA

Hello,
    Iam new to LabVIEW development & need help regarding this:
    We are trying to port a LabVIEW application from desktop to a Windows Mobile PDA. Please note that the LabVIEW application works fine on the desktop. In one of the VIs, a Tab control property node is used which gives a build error with LabVIEW PDA project. A sample VI which shows the problem & the error list snapshot is attached with this post. Can anyone please suggest an alternate approach to achieve the same functionality with LabVIEW PDA? Waiting for an early response from anyone...
Thanks & Regards,
Subhashini
Attachments:
VI_Error.zip ‏31 KB

Hello Ton,
    Am glad that i got a response, thanks. The following links indicate that Tab control is supported on PDA target:
http://digital.ni.com/public.nsf/allkb/CBA335641E27B858862571490015EA88?OpenDocument
http://forums.ni.com/ni/board/message?board.id=170&message.id=221507&requireLogin=False
    I feel that the Tab control property node that has been used in the VI (which is attached earlier) may not be supported on the PDA target. Can u (or any LabVIEW expert) suggest an alternate approach to achieve the same goal with LabVIEW PDA (changing colour of Tab control pages programatically)??
    I had missed out some details earlier: We are using LabVIEW 8.5 PDA module on a Windows Mobile PDA.
Thanks & Regards,
Subhashini

Need help on how to use conference facility within adobe connect

I need some help on how to use conference facility within adobe connect?

I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community

Do I need to shut DB when using Veritas Backup Exec 10d w/ Oracle agent?

Hi All,
Do I need to shutdown oracle when we back up the database server using Veritas Backup Exec 10d with the Oracle agent?
thanks.

Not required !!

Need help on Self Hosting Using channel Factory

Hello,
     Need Help.
     I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
The scenario is something like below this : -
I want to create the endpoint connection to WCF service. I want to achieve this using custom channel factory(not using default channel factory API provided in .Net Framework).
I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
I am able to connect to server side service hosted on different machine using following sample code successfully.
In the case of “self-hosting”  I am receiving following error : --
     "There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
Below is the code which I have written for self hosting WCF service using custom channel factory.
// Method where I am calling CustomChannel Factory constructor
internal void ProxyCall(string msgEndpointConfigurationName, string url)
            string appConfigDirName, extConfigFilePath;
            FileInfo configFileInfo = new FileInfo(appConfigName);
            appConfigDirName = configFileInfo.DirectoryName;
            extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
            this.messageEndpointConfigurationName = msgEndpointConfigurationName;
            if (string.IsNullOrEmpty(url))
                this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
            else
               //EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
               this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
   ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
   foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
    if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
     operation.Behaviors.Add(formatterBehavior);
   this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
   this.messageFactory.Open();
// Custom Channel Factory Class
internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
        /// Custom client channel. Allows to specify a different configuration file
        /// <typeparam name="T"></typeparam>
        private string configurationPath, selectedMsgEndPoint, uriAddress;
        public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
            : base(typeof(T))
            this.configurationPath = configurationPath;
            this.selectedMsgEndPoint = selectedEndPoint;
            this.uriAddress = uriAddress;
            EndpointAddress e = new EndpointAddress(this.uriAddress);
            base.InitializeEndpoint(selectedEndPoint,e);
        //As you can see, a call to the method InitialiazeEndpoint of the base class is required.
        //That method will automatically call to our CreateDescription method to configure the service endpoint.
        ///Loads the serviceEndpoint description from the specified configuration file
        protected override ServiceEndpoint CreateDescription()
            ServiceEndpoint serviceEndpoint = base.CreateDescription();
            return serviceEndpoint;
        private EndpointIdentity GetIdentity(IdentityElement element)
            EndpointIdentity identity = null;
            PropertyInformationCollection properties = element.ElementInformation.Properties;
            if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
            if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
            if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
            if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
            return identity;
        private Binding GetBinding(IBindingConfigurationElement configurationElement)
            if (configurationElement is CustomBindingElement) return new CustomBinding();
            else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
            else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
            else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
            else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
            else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
            else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
            else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
            else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
            return null;
        private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
            BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
            if (bindingElementCollection.ConfiguredBindings.Count > 0)
                IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
                Binding binding = GetBinding(be);
                if (be != null)
                    be.ApplyConfiguration(binding);
                return binding;
            return null;
        private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
            EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
            for (int i = 0; i < behaviorElement.Count; i++)
                BehaviorExtensionElement behaviorExtension = behaviorElement[i];
                object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
behaviorExtension, null);
                if (extension != null)
                    serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
Thanks in advance !! :-)

Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards

Need help - chronic freezeups when playing streaming flashplayer videos.:

I am having a chronic problem with repeated freezeups of flashplayer videos that are being streamed online where the video repeatedly and randomly locks up for a moment, and then jumps forward to catch up to where it's supposed to be again and again, with no regularity or pattern to it at all. It doesn't matter which video it is; it doesn't matter where along a video's playback it is; it doesn't matter which website it is. This problem happens at any time of day, and every single day, at random, regardless. I've tried everything including reinstalling my Windows 8.1 64-bit operating system from scratch, and then trying streaming flashplayer videos before reinstalling any other software again first - no help. I tried streaming in Safe Mode; disabling all browser addons; disabling all startup executables; disabling my internet protection software entirely, each in turn - no help. I always keep Flashplayer, Shockwave player, and Adobe Reader up to date, along with the rest of my PC via Microsoft Windows Update, and any other updates that apply, but I even tried older versions of drivers as well as the very newest ones - no help. I tried streaming using different video cards - no help. I tried using an ethernet connection and then a wireless one, separately in turn, as well as connecting to a different network - no help. I also have Mozilla's Firefox browser installed and fully up to date - the exact same random, constant freezeup problem streaming flashplayer videos happens when using it as when using Internet Explorer. These freezeups act like the incoming internet stream's feed runs ahead of flashplayer's memory management (rendering?) of it, causing these momentary freezeups while flashplayer buffers, and then jumps forward to catch up again each time. Please contact me back and provide a corrected update(s) of flashplayer to download so as to play streaming flashplayer videos without this ongoing conflict. Please note that video files that are downloaded/installed on my hard drive do NOT have playback problems of any kind. This is only an online streaming problem with flashplayer. Thank you.

I am having a chronic problem with repeated freezeups of flashplayer videos that are being streamed online where the video repeatedly and randomly locks up for a moment, and then jumps forward to catch up to where it's supposed to be again and again, with no regularity or pattern to it at all. It doesn't matter which video it is; it doesn't matter where along a video's playback it is; it doesn't matter which website it is. This problem happens at any time of day, and every single day, at random, regardless. I've tried everything including reinstalling my Windows 8.1 64-bit operating system from scratch, and then trying streaming flashplayer videos before reinstalling any other software again first - no help. I tried streaming in Safe Mode; disabling all browser addons; disabling all startup executables; disabling my internet protection software entirely, each in turn - no help. I always keep Flashplayer, Shockwave player, and Adobe Reader up to date, along with the rest of my PC via Microsoft Windows Update, and any other updates that apply, but I even tried older versions of drivers as well as the very newest ones - no help. I tried streaming using different video cards - no help. I tried using an ethernet connection and then a wireless one, separately in turn, as well as connecting to a different network - no help. I also have Mozilla's Firefox browser installed and fully up to date - the exact same random, constant freezeup problem streaming flashplayer videos happens when using it as when using Internet Explorer. These freezeups act like the incoming internet stream's feed runs ahead of flashplayer's memory management (rendering?) of it, causing these momentary freezeups while flashplayer buffers, and then jumps forward to catch up again each time. Please contact me back and provide a corrected update(s) of flashplayer to download so as to play streaming flashplayer videos without this ongoing conflict. Please note that video files that are downloaded/installed on my hard drive do NOT have playback problems of any kind. This is only an online streaming problem with flashplayer. Thank you.

Need help building .exe when using 3D correlation surface

Similar Messages

Maybe you are looking for