Need help buying a logic board!!!

Hi,
So I posted a while back about my mac failing to boot up. Now I concluded it was the logic board that was faulty. I need help deciphering what the part numbers mean.
My logic board part number is 630-6694/T6690 and model 820-1592-A. This came with the dual 2.0 ghz PPC970fx 90nm model (June 2004). There are boards with the same model number as mine, but different part number prefixes (i.e. 661-xxxx instead of 630-xxxx), so what does this mean????
I would like to really get the latest motherboard that is still compatible with the processors, if that's possible? I have seen different dual socket boards like 820-1760-A, which I'm interested in since it is the Early 2005 model.
Can anyone here with technical knowledge shed some light on what these model numbers and part numbers mean?
Thanks!

Hi, if it were me, I'd call one of these and see what'd work, I'm no expert but I hear G5s are really particular...
http://www.dvwarehouse.com/Logic-Boad-for-PowerMac-G5-(Early-2005)-820-1592-A-p-35673.html
http://www.welovemacs.com/6613584.html

Similar Messages

  • I need help buying iPhoto photo album.

    I need help buying iPhoto  photo album. iPhoto was built in to my iMac. I am supposed to be able to make picture albums using my photos. It won't let me purchase the photo album i just made. I can't find any kind of help anywhere. Please help

    If you have iPhoto '08 or older it is no longer supported for print products
    If you have iPhoto '09 or '11 reboot, launch iphoto and
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If the preview s good and you can not order boot into safe mode, preview again and order
    LN

  • My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

    I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

    I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
    Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
    This is reality. Best get used to it because it won't get any better.

  • How to identify my logic board 2009 macbook...i need to buy a new board

    my question is ....how do i find out what logic board i have in order to purchase the correct board ...they all look the same

    When consulting parts houses, you could use the serial number of
    the MacBook you have, so as to get a match in build year vintage.
    That would be more direct than say, MacBook5.2, etc. per your model.
    Several builds within a model series can vary enough to be wrong.
    Good luck & happy computing!

  • Need help buying a new computer

    Ok so I desperately need a new computer. my current one is 6 years old and is dying on me. What I'm looking for is something that will be able to run games like Knights of the Old Republic, The Sims 2, and eventually Star Wars: The Old Republic once it is released next spring. I don't want something that would be overkill for these games, but enough so that they don't lag and don't look awful. And I'm fine with buying a graphics card separately if it would be cheaper then buying some epic pc. My price range is $800-$1100, preferably $800 ^^; $1100 is like last resort no other option.
    so any help would be greatly appreciated
    On a side-note, my current pc until recently could play the above games fine, so I know I don't need some epic gaming computer to play them, but I just need help with which companies are reliable and what will be able to handle something like swtor's graphics in the near future.

    Asus Essentio Desktop / Intel® Core™ i5 Processor / 8GB Memory
    Model: CM5675-11 | SKU: 1308316
    This desktop features a double-layer DVD±RW/CD-RW drive for creating customized CDs and DVDs and a 16-in-1 media reader for storing or transferring important documents, favorite songs and special photos. The NVIDIA GT240 graphics features 1GB video memory for lush images.Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel.
     3 Read reviews (4)
    Sale: $849.99
    Hey! You don't need a powerhouse, but as long as you have such a nice budget, you might as well get something nice. This is my personal recommendation based on specs, hardware and branding. Also, the case doesn't try to be 'too cool', it's a standard, functional case with a little better construction. No video upgrade needed. (This is tower only, if you need a monitor, that's a whole different cup of tea).
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Need help buying new hard drive

    I have a macbook that needs a new hard drive and need help knowing what hard drives to buy that will be compatible with it. It is a macbook pro 17inch model no: A1297.
    Any help would be appreciated, Thanks

    Any 2.5" diameter, 9.5mm thick SATA drive will be compatible.  Currently they come up to 1.5 TB in capacity.  I have a 1 TB Seagate SSHD (hybrid) drive installed in my primary MBP.  The cost is a modest premium over a conventional HDD of the same capacity.  Boot and shutdown times are significantly faster when compared to a conventional HDD,  I can recommend this as an option.
    If the bank account permits, an SSD will produce the overall maximum performance gains.  Boot, shutdown and resource hungry applications will be noticeably faster.  Casualyll use such as e-mails and text editing will produce no meaningful performance differences compared to a conventional HDD.
    I am of the opinion that the cost premium is still too high for the benefits that they afford.  Other have different views.
    Ciao.

  • I need help buying a mba or mbp

    hello, my laptop is gone mad not literally but he's gone mad, so im going to buy a macbook air or a pro so i need help choosing:
    i will be using it for the following:
    1. documents
    2.  power points
    3. excel
    i need it to have:
    a long lasting battery,
    iam  a heavy gamer  i just like to play games so i need it for games and work
    and  most importantly i will need it in school and iam more of '' staying in house''
    sorry if i had bad english i didnt went to america a long time.

    For your top 3 things, I'd recommend the Air. It does everything really fast, and as long as you're not doing processor- or graphics-heavy things you will find it extremely speedy. Which brings me to games. If you're a heavy gamer you'll want a MacBook Pro with a discreet graphics card. This means you should get a 15-inch model (both retina and non-retina have discreet graphics). But avoid retina if you're a gamer for now, because using retina resolution really strains your graphics card, and not using retina graphics on a retina screen makes the graphics usually look worse.
    So - Air for your main applications
    And if gaming's important - a 15" non-retina MBP

  • Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

    I just recently aquired a Power Mac G5 early 2004.
    When I power the system up. I get 2 beeps
    and the small front panel light blinks 2 times continuously.
    The error codes show that it means a memory problem or
    no memory present. Memory is installed.
    In this case do I need to replace the mother board.
    The system goes no futher, no video or any thing.

    Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
    I would contact the seller if you did not personally see the computer working before you bought it.
    As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

  • Need customer relations phone #- logic board

    Long story short-- my G3 800mhz is 2 months out of apple care. I already had the logic board replaced twice in the last few years. So, when the problem happened again yesterday I decided to call apple and ask for an exception- as they had already replaced the logic board before, I thought I shouldn't have to pay to replace something with a known problem. I was very, very nice and the tech person said they would make an exception. Then, she tried to get it to go through and couldn't. So she said customer relations had to call me about it and that would take 24 hours.
    She would not give me a phone number or transfer me.
    I am a grad student, teaching during the day, and I am hard to reach by phone. I need to call customer relations TODAY as I can't be without my laptop for a long time. And she said they would fix it and I wouldn't be charged.
    Please- does anyone have their phone number?

    Congratulations on arranging a repair!
    The number you have found is formally known as the "AppleCare Support - Legacy" number, as found on this list of Apple Phone Contacts:
    http://www.apple.com/contact/phone_contacts.html
    This makes sense, since our iBooks are now considered "Legacy" (i.e. "ancient") equipment.
    Congratulations, again, and thanks for the info on the phone number. You are the very first person who has reported that Customer Service was unable (or refused) to transfer them to Customer Relations.

  • Need help buying soundc

    Hi,
    I need to buy a soundcard wich could work under Windows NT4. Can you tell me if such a product still exist ?
    Evilo from France.

    I don't like upmixing very much either, but normally there are two DPL modes on the decoder, movie and music, have you tried both?If you want to bypass the decoder and try the soundcard upmixing disconnect the 3x stereo miniplug cable (lime green, black and orange) ?from the decoder and connect them directly to the soundcard outputs and then select some mode of CMSS, my favorite is stereo x2/x3?(I don't know exactly the options available in a Li've! 24bit), but to use the decoder for DVDs the cable must be connected again to the decoder. You may also want to try this:?http://www.driverheaven.net/general-...3-encoder.html?I haven't tried it but it might allow you to use the speakers in 5. without changing cables.

  • Need help buying 15inch Macbook

    I am an industrial design student and need help configuring a macbook pro. Should I go for the 2.3Ghz model or the 2.6 one? I prefer the 2.3 Ghz one as it is cheaper. Should I get an extra 4gb ram? I do not play games, will be mainly using sofware such as solidworks and indesign on it. I am not considering the retina display models. Also, should I pay $100 to get an antiglare screen? I do have poor eyesight and think this would be a good option.
    Thanks

    matthew --
    You'll get a lot of advice here, but I feel the most important point when working with InDesign, is to get as much RAM as you can afford.  I have the non-glare MBP, and I also have the regular screen iMac.  I like them both.  I think you should think about where you will be working the most, and how much light will be there.

  • Need help in Mapping Logic

    Hi all,
    In mapping i need to mapp like this
    Idoc--file scenario, sending delivery document to file system
    in header of file structure, i have a field called Total Units, the logic for this field shld be
    Sum up the field ZCONV_QUAN for each delivery.
    How to do this please help me
    Regards

    Hi satish,
    I have to do some thing more in this.
    As you said i mapped the field to sum and to target field.its fine
    Now this field is there at header level and comes only ones, i should repeat this field as many number of times the line item repeats.
    Now iam using the ligic like this
    ZCONV_QUAN--UseOneAsMany-Sum--Target Field
    to UseOnaAsMany function i mapped ZCONV_QUAN as first argument and changed the context to Idoc and the second argument as line Item segment changed the context to Idoc, third argument as line itme segment.
    its giving the error as
    Too many values in first queue in function useOneAsMany. It must have the same number of contexts as second queue
    Regards

  • Need Help in improving logic for determining the range

    Hi guys,
    I need some help in my program logic to determine the range of value. My purpose of this program is to find which combinations have the lowest amplitude.
    In the attachment is a set of number.
    e.g 10    0 is a combination.
    Each combination, I will need to draw a graph of data acquired using this combination VS gray level. There is 255 gray level. Every 5 gray level I will acquire a point so I will have 52 points.
    Next, I will get the maximum value - minimum value. And this is the amplitude for the combination. I can do all this function, however it is not practical for me to do it this way until 360 360. There is a round 1200+ combination. It requires a long time since I need to interface all this function with my hardware.
    The graph of each combination maybe a irregular shape. Do any of you have a logic to help me to shorten the process and find the range of values (combination) where the lowest amplitude may lies. Thanks!!
    Attachments:
    example.txt ‏11 KB

    Hi Johnsold,
    This is a example of my result. This is only a portion of it. The last column is the amplitude, I store all the 52 points into array and used Array Min and Max function. Then I use max - min to get the amplitude. From the amplitude I cannot see any pattern. Can you please advice me on it. Thanks!!!

  • NEED HELP!! LOGIC CRASHES AFTER splash screen plss hel

    hey i recently updated to osx 10.6.6 and since then my logic pro has been acting up. But it has come to the point to where now it doesnt even open it crashes right after checking midi drivers. here is the report if anyone can pleasee helpp
    Process: Logic Pro [483]
    Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier: com.apple.logic.pro
    Version: 8.0.2 (1502.22)
    Build Info: Logic-15022200~9
    Code Type: X86 (Native)
    Parent Process: launchd [410]
    Date/Time: 2011-01-23 18:53:35.804 -0500
    OS Version: Mac OS X 10.6.6 (10J567)
    Report Version: 6
    Interval Since Last Report: 406669 sec
    Crashes Since Last Report: 78
    Per-App Interval Since Last Report: 367569 sec
    Per-App Crashes Since Last Report: 59
    Anonymous UUID: A3586FC6-6081-439D-A15C-C8042C0882EB
    Exception Type: EXCBADACCESS (SIGABRT)
    Exception Codes: KERNINVALIDADDRESS at 0x0000000049b45b69
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Application Specific Information:
    abort() called
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x9128a176 __kill + 10
    1 libSystem.B.dylib 0x9128a168 kill$UNIX2003 + 32
    2 libSystem.B.dylib 0x9131c89d raise + 26
    3 libSystem.B.dylib 0x91332951 __abort + 124
    4 libSystem.B.dylib 0x913329cd abortreportnp + 0
    5 com.apple.logic.pro 0x002b37ff 0x1000 + 2828287
    6 libSystem.B.dylib 0x9128f46b _sigtramp + 43
    7 ??? 0x0000000b 0 + 11
    8 com.apple.logic.pro 0x00020cff 0x1000 + 130303
    9 com.apple.logic.pro 0x00021f94 0x1000 + 135060
    10 com.apple.logic.pro 0x00032e0b 0x1000 + 204299
    11 com.apple.logic.pro 0x002b741e 0x1000 + 2843678
    12 com.apple.logic.pro 0x002b75e3 0x1000 + 2844131
    13 com.apple.logic.pro 0x00012e8c 0x1000 + 73356
    14 com.apple.logic.pro 0x0019534e 0x1000 + 1655630
    15 com.apple.logic.pro 0x004d3c78 0x1000 + 5057656
    16 com.apple.logic.pro 0x0051f9db 0x1000 + 5368283
    17 com.apple.logic.pro 0x005205f9 0x1000 + 5371385
    18 com.apple.AppKit 0x94753040 -[NSDocument readFromURL:ofType:error:] + 743
    19 com.apple.logic.pro 0x00520410 0x1000 + 5370896
    20 com.apple.AppKit 0x9463eddd -[NSDocument initWithContentsOfURL:ofType:error:] + 311
    21 com.apple.AppKit 0x9463e981 -[NSDocumentController makeDocumentWithContentsOfURL:ofType:error:] + 383
    22 com.apple.logic.pro 0x0053d6d3 0x1000 + 5490387
    23 com.apple.AppKit 0x9463e739 -[NSDocumentController openDocumentWithContentsOfURL:display:error:] + 886
    24 com.apple.logic.pro 0x004d8b79 0x1000 + 5077881
    25 com.apple.Foundation 0x923d5588 nsnotecallback + 345
    26 com.apple.CoreFoundation 0x9851f793 __CFXNotificationPost + 947
    27 com.apple.CoreFoundation 0x9851f19a _CFXNotificationPostNotification + 186
    28 com.apple.Foundation 0x923ca384 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128
    29 com.apple.Foundation 0x923d7789 -[NSNotificationCenter postNotificationName:object:] + 56
    30 com.apple.AppKit 0x94423422 -[NSApplication _postDidFinishNotification] + 125
    31 com.apple.AppKit 0x94423332 -[NSApplication _sendFinishLaunchingNotification] + 74
    32 com.apple.AppKit 0x9457a4ed -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 274
    33 com.apple.AppKit 0x9457a10d -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 101
    34 com.apple.Foundation 0x9240a7a4 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 511
    35 com.apple.Foundation 0x9240a568 _NSAppleEventManagerGenericHandler + 228
    36 com.apple.AE 0x92dc8f58 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
    37 com.apple.AE 0x92dc8e57 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
    38 com.apple.AE 0x92dc8d61 aeProcessAppleEvent + 197
    39 com.apple.HIToolbox 0x97a07389 AEProcessAppleEvent + 50
    40 com.apple.AppKit 0x943f39ca _DPSNextEvent + 1420
    41 com.apple.AppKit 0x943f2fce -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    42 com.apple.AppKit 0x943b5247 -[NSApplication run] + 821
    43 com.apple.prokit 0x0210df5c NSProApplicationMain + 326
    44 com.apple.logic.pro 0x00003942 0x1000 + 10562
    45 com.apple.logic.pro 0x00003869 0x1000 + 10345
    Thread 1: Dispatch queue: com.apple.libdispatch-manager
    0 libSystem.B.dylib 0x9124f982 kevent + 10
    1 libSystem.B.dylib 0x9125009c dispatch_mgrinvoke + 215
    2 libSystem.B.dylib 0x9124f559 dispatch_queueinvoke + 163
    3 libSystem.B.dylib 0x9124f2fe dispatch_workerthread2 + 240
    4 libSystem.B.dylib 0x9124ed81 pthreadwqthread + 390
    5 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
    Thread 2: com.apple.CFSocket.private
    0 libSystem.B.dylib 0x912480c6 select$DARWIN_EXTSN + 10
    1 com.apple.CoreFoundation 0x98540c83 __CFSocketManager + 1091
    2 libSystem.B.dylib 0x9125685d pthreadstart + 345
    3 libSystem.B.dylib 0x912566e2 thread_start + 34
    Thread 3:
    0 libSystem.B.dylib 0x912290fa machmsgtrap + 10
    1 libSystem.B.dylib 0x91229867 mach_msg + 68
    2 com.apple.audio.midi.CoreMIDI 0x025090c1 XServerMachPort::ReceiveMessage(int&, void*, int&) + 155
    3 com.apple.audio.midi.CoreMIDI 0x0252797a MIDIProcess::RunMIDIInThread() + 150
    4 com.apple.audio.midi.CoreMIDI 0x0250a2d9 XThread::RunHelper(void*) + 17
    5 com.apple.audio.midi.CoreMIDI 0x02509ca6 CAPThread::Entry(CAPThread*) + 96
    6 libSystem.B.dylib 0x9125685d pthreadstart + 345
    7 libSystem.B.dylib 0x912566e2 thread_start + 34
    Thread 4:
    0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
    Thread 5:
    0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
    Thread 6:
    0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
    Thread 7:
    0 libSystem.B.dylib 0x912570a6 _semwaitsignal + 10
    1 libSystem.B.dylib 0x91282ee5 nanosleep$UNIX2003 + 188
    2 libSystem.B.dylib 0x91282e23 usleep$UNIX2003 + 61
    3 com.apple.AppKit 0x9455cfe1 -[NSUIHeartBeat _heartBeatThread:] + 2039
    4 com.apple.Foundation 0x923d5bf0 -[NSThread main] + 45
    5 com.apple.Foundation 0x923d5ba0 _NSThread__main_ + 1499
    6 libSystem.B.dylib 0x9125685d pthreadstart + 345
    7 libSystem.B.dylib 0x912566e2 thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x913328e1 ecx: 0xbfffde9c edx: 0x9128a176
    edi: 0x1ed7c800 esi: 0x251df830 ebp: 0xbfffdeb8 esp: 0xbfffde9c
    ss: 0x0000001f efl: 0x00000286 eip: 0x9128a176 cs: 0x00000007
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x010b7818

    Hi, ish1919.
    Have you updated the drivers for your hardware? An OS update sometimes needs later drivers. Older ones can cause conflicts. Check the manufacturer website [eg. RME] for your hardware and get the latest version.
    Hope this helps.
    Scorpii.

  • Do I need to buy the development board from Phytec or would any LPC229x board do the job?

    Hi,
    I am planning to test LabView embedded on an LPC2294 development board.
    Should I buy the PhyCore development board for LPC2294 or would any other LPC2294 development board do the job?
    I have seen a huge difference in price  between the PhyCore LPC229x development board and a standard LPC2294 from other parties. However, the other party's development board seems to have more features than the one from the PhyCore development board.
    Please, let me know your advice and recommendations.
    Thank you
    Kolemale

    Hi,
    The example target in the LabVIEW Microprocessor SDK is designed specifically for the Phytec LPC2294 development board, so it would be easiest to start there. You can certainly modify the example target implementation to fit your needs for alternate development boards (in fact, that's the idea!).
    Michael P
    National Instruments

Maybe you are looking for