Need Help: Can not detect monitor

I have built a computer from scratch and the computer restart itself once awhile. I tried to update all the drivers by running a live update from MSI. All the drivers were updated, except the BIOS. I also updated the newest AGP Video driver. When I restarted the computer, the monitor went blank. It says no sync. I tried with different monitor, same thing happened. Everything is running in the system, lights all are on. I thought it might be the video graphic, so i put on an other video card to test it, same thing, no screen. Please HELP?
MSI PT880 Neo V2.0 -LSR (MS-7043 v1.2)
Intel P4 HT 3.2GHz 800MHz
Corsair DDR-SDRAM PC3200 512Mbx2 (VS512MB400)
GeForce FX5500 128mb AGP Video v71.89
IDE0 (Master) - WD Caviar SE drives 200Gb 7,200 RPM 8MB buffer
IDE0 (Slave) - WD Caviar SE drives 120Gb 7,200 RPM 8MB buffer
IDE1 (Master) - PX-716A DVD±R/RW CD-R/RW internal E-IDE
Fudin ATX868WBP "Scorpio" 420W Mid ATX Case
Raidmax ATX12V PSU +3.3v/26A +5v/32A +12v/13A -12v/0.5A -5v/2A
Windows XP Pro SP1a w/all pre-SP2 Critical updates

try to refer to this link
http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_alp.php

Similar Messages

[nVidia Series] Need Help: Can not detect monitor

I have built a computer from scratch and the computer restart itself once awhile. I tried to update all the drivers by running a live update from MSI. All the drivers were updated, except the BIOS. I also updated the newest AGP Video driver. When I restarted the computer, the monitor went blank. It says no sync. I tried with different monitor, same thing happened. Everything is running in the system, lights all are on. I thought it might be the video graphic, so i put on an other video card to test it, same thing, no screen. I don't know what to do now. Please HELP?
MSI PT880 Neo V2.0 -LSR (MS-7043 v1.2)
Intel P4 HT 3.2GHz 800MHz
Corsair DDR-SDRAM PC3200 512Mbx2 (VS512MB400)
GeForce FX5500 128mb AGP Video v71.89
IDE0 (Master) - WD Caviar SE drives 200Gb 7,200 RPM 8MB buffer
IDE0 (Slave) - WD Caviar SE drives 120Gb 7,200 RPM 8MB buffer
IDE1 (Master) - PX-716A DVD±R/RW CD-R/RW internal E-IDE
Fudin ATX868WBP "Scorpio" 420W Mid ATX Case
Raidmax ATX12V PSU +3.3v/26A +5v/32A +12v/13A -12v/0.5A -5v/2A
Windows XP Pro SP1a w/all pre-SP2 Critical updates

I bought the Antec NeoPower 480 and installed it. Ran it over a few hours, no restart, it's a good sign.
I use the SpeedFan 4.24 program to monitor my system.
Under the VCORE: 1.36v
+3.3V: 3.30V
+5V: 4.97V
+12V: 12.04V
-12V: -12.03V
-5V: 3.55V
+5VSB: 5.48V
VBAT: 3.14V
Fan1: 2722 RPM
Fan2: 0 RPM
Temp1: 35c
Temp2: 45C
HD0: 31C
How come the +12V only has 12.04V, shouldn't it be 18V? I have 5 fans running in the case, not including the PSU fan and CPU fan, but Fan2 is 0 RPM. Also, Temp2 sometime went up to 52C, then dropped to 45C. Is this normal? Did I install the power supply correctly?

HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

Try Perian.
http://perian.org/

Need help can not use my Photoshop Elements

Hi
I bought the Samung Series7 Ultra "CORE i5" from Bestbuy.
but every time I try to open photoshop so I can not. Why ? Error 213:19

http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html

Need help - can not invoke interface

Experts,
I am working in an assignment where I am using MS Access databases as sources and oracle as a target. I have defined an interface where I am using 10 tables from a single MS Access database and loading a target table. Insert/Update/Commit flags are on, flow and static control flags are off.
When I am trying to invoke the interface execution from designer, it freezes. It does not matter if I am using an agent or not (i.e. local agent), the behaviour is same. If I try to generate a scenario, the same happens. If I try to open the interface and save it, there are no issues.
There is a single context and all connections are working. I have other interfaces using multiple tables with the same source systems and targets and they are working nicely. I am connecting to MS Access through ODBC and access database file is stored in a remote machine. I have tried to export (and delete the interface after that) and import (in both insert/update and duplication mode) the same interface to see if that works and it is not working. I have run out of ways, the only other choice is to raise a ticket to infrastructure (oracle on demand), but if the client installation is incorrect then how are my other interfaces working? I can re-work the interface with a new component and see but is there anyone who has faced and solved it?

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Note: Data will not be affected.

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.

also say explorer not reading SWF files and I have to reload them? Not sure what that is either,
Thanks
Jim

Hi Nancy
Trying to update my site got to make some changes. Do you work on sites via remote? I am on Cloud.
: Nancy O.
Sent: Monday, September 01, 2014 3:47 PM
To: James Neidner
Subject: Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
created by Nancy O. <https://forums.adobe.com/people/Nancy+O.> in Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6692200#6692200>

Windows 10 elitepad in Dock can not detect VGA monitor

Windows 10 will not detect my external monitor. I loaded Winbdow 10 on elitepad 1000 about 2 days ago. This is the first time I've tried to use my extenal monitor. My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81. I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock. Now tablet can not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in . I've run the detect monitor several times.   Any one got a solution. The new HP support page does not even list tablet as an option for display support. Thank you

            Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
          So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

Guys I really need your advice please...
I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
Thanks in advance.
ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

My iphone 4s had upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios org back in to ios 6 again?

my iphone 4s has upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios or back in to ios 6 again? i have try to restore iphone , reset all but it can't solve my problem. any one can help me?

You can't downgrade the iOS level.
Try using Settings > General > Reset > Reset Network Settings.

Need Help: Can not detect monitor

Similar Messages

Maybe you are looking for