NEED HELP cannot find data

Hi all
I just developed a registration application using netbeans 6, glassfish and mysql, JSF EJB
The program runs perfectly apart from a little instability from netbeans. But after the success page has displayed, i Cannot find the data I persisted in the database.
Can some one help me since i'm a bit new to this.
Thanks in advance

Sorry but my problem is that after the persistence, i could not find the data I entered in the JSF register page.
The progran first displays a register page:
after validation the backing bean invokes the session bean method to save the data.
The method returns a string which is then used in faces config to display the login page.
Well when I run the program, everything works fine.
then i enter the select command in the mysql server console to view the data but the new entry could not be found in the database
Is it that the program is faulty or the data was not saved since there was no exception or error dispalyed

Similar Messages

Need help: Cannot find Microsoft Word installed on your system.

I am having issues trying to generate a pdf from a robohelp 7 html project. Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."
I have tried to uninstall both Office (2003) and robohelp, re-installing office first and then robohelp, but it doesn't help. Can anyone shed some light on this issue?

Colum,
Thanks for the reply, but it's Microsoft Office, not Open Office.
I have read many threads here and tried most of the suggestions, up to and including:
Uninstall/Reinstall of Office and RH 7
Adjusting Macro security
comparing registry entries
There are others but I can't think of them all right now. Point being, nothing has worked thus far. I must admit this is fairly frustrating but I haven't given up yet. Any more suggestions are welcome, and I will review the link you gave me just to make sure I cover all my bases.

Need Help ;cannot find any full board waterblock for BigBang 2 x79

I've just bought this MSI BigBang Xpower II and I am really happy with it. Then it comes I cannot find any waterblock for it.
Please recommend me where can I get it, I really do want one.
Thank you very much
PS. If no one make them, I wish MSI encorage them to because all X79 board in the market, MSI rules, Peeople still bus Rampage 4 Extreme because of the fullboard water block and also its's ATX. for BigBnag you really have a big case EG TJ11, therefore it's hi -end board and Im sure that a lot of user that buy BigBangII would be real happy having full board waterblock for their Extreme system.

Quote from: Henry on 18-February-12, 07:34:19
From what I've found you can use LGA 1366 water block for CPU and then purchase a screw kit made for LGA 2011 MBs. Footprint for water block is the same for both just mounting depth is different and requires a special screw kit. Look it up, you certainly don't need us for that kind of research.
The Cpu block isnt a problem, anything that support LGA 2011 will fit well. What I actually want is a Fullboard block or at least PWN waterblock, In thailand it does get very hot, there are only summer.
Quote from: HU16E on 18-February-12, 06:59:00
Recommend to use the search features of the internet. Too new a board for much information about availability of aftermarket components. It is doubtful MSI is going to encourage any manufacturer to build aftermarket parts. Contact them & voice your thoughts;
http://support.msi.com
I will try asking waterblock manufacurer but I dont know how long will it take. thanks for the advise tho.

Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help in finding the number of occurrences of a pattern.

Hi All,
I need help in finding the number of occurrences of a pattern in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C"
My requirement is:
I should get the count of S's which are immediately preceded by A or P.
for the above data i should get count as 3+2+1=6 (S-S-S-A, S-S-P, S-A)
The pattern data is stored as VARCHAR2 type.
Thanks in advance,
Girish G
Edited by: Girish G on Jul 21, 2011 11:22 PM

I am sure there exists a better way then this one:
SQL> with dt as
2 (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
3 SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
4                                     Regexp_count(str, '(S\-?)+(A|P)+') - (
5                                                  LEVEL - 1 )), 'S')) len
6 FROM   dt
7 CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
8 /
       LEN
         6

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

Need help in finding mpeg2 component number to unlock key so I can burn a dvd?

Need help in finding mpeg2 component number to unlock key so I can burn dvd?? I have premiere elements 3.0
Thanks,
sylvia

Sylvia,
I cannot comment on PrE 3, as I did not start until PrE 4. With the latter, when one went to use one of the modules, they were automatically "registered." Based on comments in the Help file, I asked pretty much this same question, back then. All was done automatically, in PrE 4.
Maybe those, familiar with PrE 3, can be of help to you.
Good luck,
Hunt

I need help in finding all the new fontsin iPad 2 using iOS 5

I need help in finding all the new fonts in ipad 2 using ios 5

You cannot change the email font. You can make it bold, italics and underline the type, but Helvetica is your only choice in the mail app.
In the notes app you have 3 choice Noteworthy, Helvetica and Marker Felt. The font can be changed in Settings>Notes>Font.
You can only use fonts that are built into the app that you are using at the time. You cannot pick and choose fonts from a list of all of the fonts that may be on the iPad but only from the list of fonts that the app allows.

Cannot find Data Neighborhood in NI-DAQmx Base to create a Task

I cannot find Data Neighborhood in NI-DAQmx Base inorder to create a Task.
I am trying to follow the "Learning with LabVIEW 8" tutorial book.
I am using a NI USB-6008, and have downloaded NI-DAQmx Base 3.0.
The book says to right click on Data Neighborhood and "Create New". I cannot find Data Neighborhood anywhere. The help documents referance Data Neighborhood but I still can not find it. Is Data Neighborhood not in the base version?
Please Help Thank you

Hi Lazysmartperson,
DAQmx base uses a different utility to create tasks. This is called the NI DAQmx Base Configuration Utility. It can be found in Windows by going to Start » Programs » National Instruments » NI-DAQmx Base » Utilities » C Interface. The reason behind this is because NI DAQmx Base is typically used on non windows operating systems such as Linux, Mac OSX, and some RT systems. Since there is no Measurement and Automation Explorer (MAX) for these operating systems we use a different utility for customers to configure tasks. If there is no specific reason you cannot use DAQmx, I would highly recommend switching to it. Our DAQmx driver is fully supported within MAX and should show up as in Matthew's last post. If you are looking to develop in DAQmx Base so that the applications can be used later on Linux, Mac, or other DAQmx base supported operating systems, I would suggest taking a look at the DAQmx Base Configuration Utility.
I hope this helps,
Paul C.

I need help to find my iphone 5C. I have id apple but perhaps I can do more to find it. Please contact to ********

I need help to find my iphone 5C. I have id apple but perhaps I can do more to find it. Please contact to ********
<Edited by Host>

Hi Oliveira_Lisboa,
The article below has some information about the options and features available, it also has some tips that might help you locate your iPhone.
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/ht5668
If you lose your iOS device or think it might be stolen, these steps may help you locate it and protect your personal data.
If you enabled Find My iPhone on your missing device
These steps require that Find My iPhone was enabled on your device before it was lost or stolen.
Attempt to locate your device using Find My iPhone at icloud.com/find, or using the free Find My iPhone app.
Put the device in Lost Mode to set a 4-digit passcode and display a custom message with your phone number on your device. While the device is in Lost Mode, you can also keep track of changes to your device's location. Lost Mode requires that your missing device be using iOS 6 or later. If your device is using iOS 5, you can still lock your device remotely and display a message on the screen.
If you want to delete all of your personal information from your missing device, you can erase it remotely. Please note that when you erase a device, you will no longer be able to locate it.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.
Note: If your missing device is offline, you can still put it in Lost Mode, lock it, or erase it. Your commands will take effect when the device comes back online.If you did not enable Find My iPhone on your missing device
If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.
Additional Information
Visit iforgot.apple.com/appleid if you need help remembering your Apple ID.
-Jason

Need help in finding patterns and there counts

Hi All,
I need help in finding patterns as well as number of occurrences of those patterns in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-P-S-B-S-S-C-S-P"
My requirement is:
I should get all the patterns that are followed by 'S'.
Example: for the above given data the patterns and counts are
SS - count is 3
SP - count is 2
SB - count is 1
SS - count is 1
There is one more condition for the above requirement:
If 'S' is followed by 'A', then 'SA' should not be considered as a pattern. The pattern should stretch until a non 'A' character is found.
Consider sample data for the above case:
"S-S-A-S-S-A-A-C-S-P-S-A"
for the above given data the patterns and counts are
SS - count is 2
SP - count is 1
SAS - count is 1
SAAC - count is 1
The data column is stored as VARCHAR2 type.
I have Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
Thanks in advance,
Girish G

Hi, Girish,
Girish G wrote:
Hi All,
I need help in finding patterns as well as number of occurrences of those patterns in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-P-S-B-S-S-C-S-P"
My requirement is:
I should get all the patterns that are followed by 'S'.Do you mean "I should get all patterns that *start with* 'S'"?
Example: for the above given data the patterns and counts are
SS - count is 3
SP - count is 2
SB - count is 1
SS - count is 1Why are there two rows of output for 'SS'? What does the second one, with count=1, mean?
There is one more condition for the above requirement:
If 'S' is followed by 'A', then 'SA' should not be considered as a pattern. The pattern should stretch until a non 'A' character is found.
Consider sample data for the above case:
"S-S-A-S-S-A-A-C-S-P-S-A"
for the above given data the patterns and counts are
SS - count is 2
SP - count is 1
SAS - count is 1
SAAC - count is 1
The data column is stored as VARCHAR2 type.
I have Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit ProductionThanks; the version information is very helpful.
Thanks in advance,
Girish GWhenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
For example, your sample data might be:
CREATE TABLE     table_x
(       x_id     NUMBER     PRIMARY KEY
,     txt     VARCHAR2 (30)
INSERT INTO table_x (x_id, txt) VALUES (1, 'S-S-S-P-S-B-S-S-C-S-P');
INSERT INTO table_x (x_id, txt) VALUES (2, 'S-S-A-S-S-A-A-C-S-P-S-A');and the results you want from that data might be:
X_ID TXT                       PATTERN                          CNT
   1 S-S-S-P-S-B-S-S-C-S-P     SB                                 1
   1 S-S-S-P-S-B-S-S-C-S-P     SC                                 1
   1 S-S-S-P-S-B-S-S-C-S-P     SP                                 2
   1 S-S-S-P-S-B-S-S-C-S-P     SS                                 3
   2 S-S-A-S-S-A-A-C-S-P-S-A   SAAC                               1
   2 S-S-A-S-S-A-A-C-S-P-S-A   SAS                                1
   2 S-S-A-S-S-A-A-C-S-P-S-A   SP                                 1
   2 S-S-A-S-S-A-A-C-S-P-S-A   SS                                 2(This corresponds to what you posted, except that there is only one output row for 'SS' when x_id=1.)
One way to get those results in Oracle 11 is:
WITH   got_s_cnt    AS
     SELECT     x_id, txt
     ,     REGEXP_COUNT (txt, 'S')     AS s_cnt
     FROM     table_x
,     cntr          AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL <= (
                               SELECT MAX (s_cnt)
                         FROM    got_s_cnt
,     got_pattern     AS
     SELECT     s.x_id
     ,     s.txt
     ,     c.n
     ,     REGEXP_SUBSTR ( REPLACE ( SUBSTR ( txt
                                             , INSTR (s.txt, 'S', 1, c.n)
                     , 'SA*[^A]'
                        )       AS pattern
     FROM    got_s_cnt s
     JOIN     cntr        c ON c.n <= s.s_cnt
SELECT       x_id
,       txt
,       pattern
,       COUNT (*)     AS cnt
FROM       got_pattern
WHERE       pattern     IS NOT NULL
GROUP BY x_id
,            txt
,       pattern
ORDER BY x_id
,            pattern
;At the heart of this query is the call to REGEXP_SUBSTR:
REGEXP_SUBSTR ( x
           , 'SA*[^A]'
           )which is looking for:
S = the letter S
A* = the letter A, repeated 0 or more times
[^A] = anything except the letter A

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help in transfering data to my new iphone4 from my old iphone3

Hello, just received my new iphone 4, need help in transfering data from my old iphone 3 photos, emails etc. apps, thank you

http://support.apple.com/kb/ht2109

NEED HELP cannot find data

Similar Messages

Maybe you are looking for