Need help changing an Adaptive RFC Model in WDJ

Hello All,
We have an existing application with few custom BAPIs are called. However we added few fields added to the custom BAPI.  We could not figure out how to bring the new fields show up in used Model and context.
Any Help greatly appreciated.
Thanks.
PK

Hi ,
The following link help you.
Importing Models Using the Search Console - Developing Java Web Dynpro Applications - SAP Library
SAP Library - Development Manual
Now to call the FM you have to follow the steps:
1)In NWDS click on models->then right click it select import Adaptive RFC model
2)Here gave the name of the Model , package etc and the names of the JCo Destinations tht will be needed to call from R/3.
3)Give the Information abt the R/3 Host and username password of the R/3.Press Next
4)Now search for the Bapi you want to Use. Select it Press Next
5) press Finish. You have imported a Bapi from R/3.
Now you can play around with it according to your requirement..
You need to create the Context, Views to show the Data of the Bapi.
Hope this helps you out.
Thanks & Regards,
Durga Rao

Similar Messages

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • Error while creating a Adaptive RFC Model

    Hi all,
    I am trying to create a Model using a Adaptive RFC Model, I assign a Model name and the logical system names, enter the details in SAP Logon Information for the Single server,here it gives me a Gateway error. What could be the issue here?
    NB: In the Host Name , I tried with both the Host name of the r/3 server and also with the SAProuter string ( as we have the server at other place) ,still it doesnt work. and I am able to login to the R/3 system from the SAPLogon GUI from my desktop normally.
    Is there any issue of the firewall related to this, if so whats the port number that should be opened so that i can connect to the r/3 system get the list of BAPIs present there into my Webdynpro application .
    Need help on this
    Regards,
    Vijay

    Hi Lohi n Gopi ,
    I have checked out with the your given suggestion of trying with the host name as well as  IP address and also typing all the details,without copy pasting the details . In both the cases it gave the " Connect to gateway failed " error mesg.
    But one intersting thing here that i observered when trying with hostname, IP address, or SAProuter string is as follows .
    <b>with IP address</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="ipaddress",GWSERV=sapgw10,ASHOST="ipaddress",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      patner not reached(host "ipaddress",service=3310)</i>
    <b>with SAProuterString</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="SAProuterString",GWSERV=sapgw10,ASHOST="SAProuterString",SYSNR=10
    LOCATION SAPRouter on " some HostName"
    ERROR      hostname unknown</i>
    <b>with HostName</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="hostname",GWSERV=sapgw10,ASHOST="hostname",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      hostname "hostname " unknown</i>
    Is there any firewall port blocking issue here ?if so , whats the port that needs to be opened ?
    Appreciate your help.
    Thnks,
    NR

  • Reimporting of Adaptive RFC model

    Hi all, I have added two fields in the BAPI and i have reimported the Adaptive RFC model in Web Dynpro.
    After running the application and accessing the new fields, i am getting this exception.
    java.lang.ArrayIndexOutOfBoundsException
         at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10161)
    What could be the reason?

    Hi,
    As the error states MetaData.getType it seems that the new changes are not yet reflected in the J2EE server. You need to restart your engine once. You can search this forum for a workaround  by Valery which doesnot need a restart.
    Regards
    Ayyapparaj

  • Adaptive RFC Model - disconnectIfAlive()

    Hi,
    In my Web Dynpro application, I am using Adaptive RFC model and executing the RFC as below
    ZRfc_Test_Input input = new ZRfc_Test_Input();
    // set input
    input.setParam1("xxx");
    input.setParam2("xxx");
    input.execute();
    My application works fine for couple of days and suddenly I get an error that
    "com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:Could not create JCOClientConnection for logical System: WD_TEST_MODELDATA_DEST - Model: class com.test.TestModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!"
    Our basis guys are unable to figure out why the SLD is misbehaving suddenly. If we restart the SLD, everything will be fine for next couple of days.
    I just want to make sure that it is not happening due to my application or due to the way the RFCs are being executed.
    After I execute my model, do I have to explicity disconnect the connection using below statement?
    <b>input.modelInstance().disconnectIfAlive();</b>
    Do I have to do this even when I am using Adaptive RFC model?
    Default min and max number of connections are used while creating JCO destinations.
    Appreciate your input.
    Thanks
    Kumar

    Hi Siva,
    >>> It is always better to close the connection after executing the RFC<<<
    Thanks for the response. I am sorry for being adamant, I agree that it would be nice to disconnect but IS IT MANDATORY? If the pool size is increased appropriately, doesn't web dynpro runtime takecare and disconnect the connections after the execution.
    In SAP tutorials and help.sap.com (at least the ones I have gone through), it is never mentioned any where that one MUST close the connections EXPLICITLY after the execution. All these days I am under the impression that it is not needed for Adaptive RFC models. I may be wrong.
    Could you please confirm if we should close the connections explicity?
    Thanks
    Kumar

  • Dynamic JCo Connection with Adaptive RFC Model 2

    Hi gurus,
    I'm trying to dinamically change a model data connector inside my web dynpro. I'm using an Adaptive RFC Model 2 to communicate with the R/3 backend. I've found that is possible to change the connector modifiyng the code inside the web dynpro. In detail I've found this example:
    IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
    I put this code into wdDoInit method but I get the following error:
    "<comp_name>.wdDoInit failed to create or init instance of model 'model_name' in scope NO_SCOPE with instanceId 'null'"
    Furthermore I've used the deprecated Adaptive RFC Model and when I instantiate a model, ModelName m=new ModelName(), I see that the methods m.setJcoClient(client) and m.setSystemName(systemName) are visible, while when I try to do the same with Adaptive RFC Model 2, with my model m, the methods before there aren't.
    So this is my question: is it possible to change data connector dinamically with Adaptive RFC Model 2?
    Thanks a lot

    Dear Lukinho,
    You may try this ;
    try {
    IWDJCOClientConnection clientCon =  WDSystemLandscape.getJCOClientConnection("<name of the JCO connection>");
    String clientName      = clientCon.getClientName();
    String lang          = clientCon.getLanguage();
    String passowrd          = clientCon.getPassword();
    String sysID          = clientCon.getSystemIdentifier();
    String user          = clientCon.getUser();
    //etc...
    } catch (WDSystemLandscapeException e1) {
    // TODO Auto-generated catch block
    e1.printStackTrace();
    I got this code from the thread   [Multiple Client Logon in JCO   |Re: Multiple Client Logon in JCO;
    Also have a look at this thread
    [JCo Destination   |Re: JCo Destination;
    Hope it helps!!
    Warm Regards
    Upendra Agrawal

  • SAP R3 Conector System at the Adaptative RFC model

    Hi folks!
    We´ve generated a Web Dynpro project using the Adaptative RFC model. When running the application we get the exception:
    com.sap.dictionary.runtime.DdException: at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
    This surely happens because we haven´t defined the SAP R3 connector system:
    Could someone please show us how to do this?
    We are using SAP R3 Dedeicated connection, should we use the SAP R3 ConnectionString? At least, we need to know which is the Gateway Host, the SAP R3 machine or the J2EE WAS one? Is the other the Application Server Host? What would be the Gateway Service?
    In the other hand, at defining the RFC Destinations on the SAP R3 server, we´re using the "Registered Server Program" Activation Type. Is this correct? When testing the connection, it fails because the program is not registered at the server.
    Thanks in advance.

    Hi Bernanrdo,
    I have given answer to your another post.
    Just look at that. It will help you.
    Regards,
    Bhavik

  • Issue with adaptive RFC model - BAPI

    Hello,
    I created a simple web dynpro application (as a DC project in NWDS) which is using a bapi in an adaptive RFC model.  I based my developments on the official tutorial from SAP and followed each and every step.
    The first view shows a single field and an action button to trigger the bapi call.  Based on the value entered (employee number), the other view should display a list of data (addresses).
    The problem is that after I press the action button, it doesn't make it to the next view.  The animated web dynpro icon shows up briefly but the page stays on the first view.
    I've monitored user activity on the back-end (SM04) and noticed some activity for my user after the button is pressed so I assume, there is no connection issue.
    Any help to solve that issue will be greatly appreciated!
    Thanks,
    Laurent

    Hi,
    Regarding navigation between different view in an WebDYnpro project please have a look into this very good tutorial... and this will solve your navigation problem..
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a137c339-0b01-0010-a688-a87b88706845">How to Navigate Inside Web Dynpro Component Interface Views</a>
    and if need any help regarding Adaptive RFC in WebDynpro.. let me know.. Please reward points if helps..
    Thanks and Regards
    Avijit

  • Error while importing a Adaptive RFC Model

    Experts,
    I am trying to import an Adaptive RFC Model. Before importing I need to speciy the connection parameters in the import wizard. I am using the single server method to connect and have specified all the parameters correctly. I have not specified a SAP router as I am using a test system. when I click next on the Model import wizard I get an error.
    The trace shows-
    [code]ConnectionFailed Exception : com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=test833, GWSERV=sapgw00, ASHOST=test833, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host 10.3.82.177, service 3300)
    TIME        Fri Jun 29 08:54:18 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r.cpp
    LINE        8715
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUN
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connect(ConnectionManager.java:220)
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connectToSingleServer(ConnectionManager.java:206)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.internalConnectToServer(SAPLogonPage.java:1769)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.access$2300(SAPLogonPage.java:46)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage$9.run(SAPLogonPage.java:1730)
         at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
         at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
         at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.block(ModalContext.java:136)
         at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:261)
         at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.connectToServer(SAPLogonPage.java:1699)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.performFinish(SAPLogonPage.java:1805)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelWizard.initializeReimporter(ModelWizard.java:1410)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelWizard.performPostSapLogonPageForReimport(ModelWizard.java:1433)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:85)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.reimportModel(ModelEditorCallback.java:218)
         at com.sap.ide.webdynpro.service.modeleditor.ModelService.reImportModel(ModelService.java:207)
         at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.reImportModel(ServiceWithUI.java:120)
         at com.sap.ide.webdynpro.tsmodel.application.actions.ReimportModelAction.run(ReimportModelAction.java:11)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBReimportModelAction.run(PBReimportModelAction.java:77)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBDevelopmentObjectAction.runInternal(PBDevelopmentObjectAction.java:80)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBDevelopmentObjectAction.run(PBDevelopmentObjectAction.java:61)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=test833, GWSERV=sapgw00, ASHOST=test833, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host 10.3.82.177, service 3300)
    TIME        Fri Jun 29 08:54:18 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r.cpp
    LINE        8715
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUN
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1125)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connect(ConnectionManager.java:216)[/code]
    Can someone tell me problem..
    Thanks in advance,
    Vineeth

    In service file if entry is not there... give the enty like
    <b>sapgw<Inst.No>       33<Inst.No>/tcp
    sapgw<Inst.No>s      48<Inst.No>/tcp</b>
    where <Inst.No> = System Number of your R/3 system(00 or 01...)
    In host file....
    ip of the server                            name of the server....

  • Login failed error while importing an adaptive RFC model

    Hi there,
    I am trying to import a adaptive RFC model for a BAPI from a 46D system, to which I have connected using VPN from my WAS J2EE server. I have given the login details as Single server(Not load balancing), and given the user login details. However, I am not able to proceed further because it gives me the error 'Name or password is incorrect, please re-enter'. This is strange because I am giving the correct name and password, and I am able to login to this system through SAP GUI using same logon credentials.
    I am confused as to what it is expecting to move forward. I have tried changing case of the user name, restarting my WAS etc. The client is correct, and the login language is EN.
    Could anybody have any clues or have you faced a similar problem?
    thanks in advance,
    LM

    I have had the same problem.
    I think whoever programmed the logon routine at that point should be fired immediately and banned from programming for life! Logging on is a very basic and well-understood task, and programmed gozillions of times since 1940s. Common sense and unwritten rules of programming dictate simply if you make something case-sensitive, then you should accept an input in its original form (i.e. password in smalls, or whatever) but not change it to uppercase and then work case-sensitively. Either this, or you program everything case-insensitively.
    Fire that programmer or give him to us gollumvoice

  • How to find out the destination of an "Adaptive RFC Model - DEPRECATED"

    Hi All,
    How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
    and Where is the destination created in the server .
    I have got the code of the running project from NWDI .
    Thanks in Advance
    Regards
    Piyas Kumar

    Hi,
    I am not sure I fully understand the question, but as per the guide
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
    Excerpt from Page 7
    Caveat Confector!1
    ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
    still available for compatibility reasons, but the destinations it creates are not used by ARFC2
    models!
    Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
    the NetWeaver Administrator.
    Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
    Browse your application here, and then select the JCO Connections tab on the right hand side.
    I hope this helps.
    Best Regards,
    Ervin

  • Adaptive RFC model connectivity to SAP R/3 4.6 B

    We are developing a new webdynpro application which uses the backend R/3 version is 4.6B using Adaptive RFC model.
    We are able to connect to Web As systems without any issues but getting error messages while creating the Adaptive RFC model to R/3 4.6 B system as backend.
    Appreicate your help.
    Message was edited by: Udaya Chada

    Hi ,
    I think SLD,s/w Catalog and Creating Logical Systems were Configured,
    Go through the Following Steps Like,
    -- General Data, Enter the Client of the System and Client No. (JCo Connection is Pointing to)
    --J2EE Cluster, Select the J2EE Cluster you wish the JCo destination to be assigned
    -- Select the Destination Type, Either Application/Dictionary data
    -- Appl.Server, You may only select Servers/Logon Groups From the Drop down list that have first been defined as technical Systems in SLD.
    -- Message Server, Application Data JCo destination is connected must have atleast one logon group.( if this is not done ,use SMLG transaction code to create in SAP System)
    --Security, If you have selected connection Type as Application Data , then in the Security Screen you would appear Authentication Techniques and select a appropriate one .
    if you have selected connection type as a Dictionary meta data then provide User Name and Password
    If this is useful to you ,don't forget to award Points
    --Venkat

  • Problem in displaying a field in webdynpro using Adaptive RFC model

    HI,
    I created a webdynpro application using adaptive RFC model and i have a problem in displaying one of the output fields.
    When i execute the function module it is giving the exact value for my output field in this case telephone number (of type STEXT which is char with length 40).But when i am trying to display that telephone number in webdynpro application it is taking only first 4 digits.
    i deleted the model and recreated it still it doesnot work.
    please let me know how to resolve it.
    points will be awarded for sure
    Bala

    Hi Bala,
    Whenever you reimport the model server restart is necessary otherwise the changes will not get reflected. You will get an error when you deploy the application.There is no go around except restarting the server as the meta data gets cached in the server as long as the server is runnig.So, Once you restart the server the cache will be cleared.
    Check once again whether you are fetching data from correct BAPI field. Still problem persist try debugging.
    Regards, Suresh KB

  • Importing adaptive RFC model in NWDS CE 7.1 doesn't work

    Dear all,
    I am unable to create an adaptive RFC model in my Web dynpro DC in NWDS CE 7.1.
    This is what happends:
    I select create model from the web dynpro, fill in name and jco destinations on the first page and move to the second page where I fill in SAP login information.
    After clicking next I come to "Select RFC modules", but I never see the studio logging in to the server system. The result is that I dont find any function modules when i click search.
    I am new to NWDS 7.1 so I suppose there is a setting that I have missed.
    Have anyone else experienced the same problem and solved it?
    I currently have an old SAP system (NW04) and a new system (NWCE7.1). On my PC I have installed NWDS 04 and NWDS CE7.1. The old studio can connect to both the new and old backend system just fine but the new studio cant connect to any of them.
    I am very grateful for any help or pointers in the right direction.
    Sincerely,
    Richard Linnander

    Never mind. I solved this myself.
    It was caused by DLL-hell. I was running an old version of librfc32.dll that was for NWDS 04. Works fine with the version that comes fresh with install of NWDS CE 7.1

  • Error in Import Adaptive RFC Model

    Hi SDN,
    I am trying to develop an application using Import Adaptive RFC Model, while creating a model i could not able to connect to the backend system after giving the single server parameters. When i click on the next button a pop up is displayed with an error message *"User Name or Password wrong" *.
    But i could able to login to R/3 with the same userid and password from SAP logon pad.
    Really i am at Six and Seven's to trace out this error. Please suggest me how to overcome this error and create the model succesfully.
    Regards
    Basha

    Hi Praveen & Chaitanya
    Thanks for your quick response and informative threads.
    Actually in order to import an adaptive rfc model
    I have right clicked the model node to create a model and given the model name,package name,model data and metadata names and clicked next button. Then in the next screen
    Tab Strip -> Single Server:
    Host name :
    System Number :
    client details:
    Tab Strip -> Load balancing:
    System :
    Message Server:
    System Name:
    Group:
    (in Tcode: SLMG i have added the group public also)
    client details:
    After entering the required details either in Single Server or Load balancing and clicked the next button  I could not able estabilish a connection to the backend R/3 and get the list of Bapi's or RFc's. Instead i am getting a pop up message "User Name or Password Wrong". I could not able to proceed from here.
    But with the same above parameters i could able to logon to R/3 from SAP Logon Pad. I have tried by giving the user name in Cap's and small letters but no use.
    As i was strucked at the intial step while creating the model but not during the execution of the program, as far as my knowledge is concerned i think we no need to worry on SLD or JCO connections during the creation of the model. Please correct me if i am wrong and suggest me to rectify the error.
    Regards
    Basha

Maybe you are looking for