Need help changing OneDrive location in Windows 10
Running build 9879 right clicked on onedrive properties and couldnt find an option for changing the location like in windows 8 i changed the location in the registry but my files still sync to the default location any help would be greatly appreciated.
This worked for me:
Exit OneDrive by right-clicking icon in the tray.
Delete the OneDrive folder found in your User folder.
Restart OneDrive.
It should start with a wizard that gives you an option to change the location of your folder.
I hope this helps.
Similar Messages
-
How can I change the onedrive location using Windows 10 build 9226 and an Microsoft account to log in (I cannot unlinked the onedrive and relink again to specify the new location)
Any ideas?
Thanks!Hi Alexandre,
Yes in Windows 10 build 9926, there is no option to unlink OneDrive and reconfigure it, and also no Location tab when right-click on the OneDrive using File Explorer.
If we still would like to modify the OneDrive storge location on your local machine, you may try to delete the OneDrive folder which created under your user's folder, and then configure the location again.
1. Right click on the OneDrive icon on the right-down corner, then choose Exit.
2. Find the OneDrive folder under C:\Users\Your User Name, then click OneDrive and click delete;
3. Restart OneDrive on the start Menu, or double-click OneDrive under:
C:\Users\Your user name\AppData\Local\Microsoft\OneDrive
Then it will show you a message:
Click OK to reload the Wizard and configure the location there:
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is there a pre extracted version of the installer or a way of specifiying where the installer extracts itself to?
If Firefox on Windows is using the current temp folder then you need to change the location of the temp folder via the %TMP% and %TEMP% environment variables.
*Control Panel > System > Advanced > Environment variables
*Right-click My Computer > Properties > Advanced > Environment variables -
Need help I can't install windows 7 to my SATA HD
need help I can't install windows 7 to my SATA hard drive, when it gets to the part of selecting a drive partition to install windows it tells me my hardware does not support booting to this disk check that the disk's controller is enabled in the bios settings, I can't find any AHCI mode to switch to and RAID also did not solve my problem, bios version 786F1 v01.04
Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
I Need help changing my name on lipad and iPhone to sync. I have two different name1 is from my laptop and the other is from iPad ,so I can't sync iTunes. Please help!!!!!!
Plug the iphone in and go to the music tab in the iphone,not your itunes library.There will be a button in the borrom right that says autofill. Click that and it should thransfer all your music. It worked for me,and i had the same problem.
-
Guys, I have forgotten my security question answers, and the rescue email I placed in with my apple id has been closed down as well (it was a university id, when I graduated, the email service expired). I need help changing my password.
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
i need help changing my security information because i forgot it and i clicked forgot your answers on the apple website and its sopost to send me an email saying how to reset it but i never got an email.
Contact iTunes support:
http://www.apple.com/support/itunes/contact/ -
I need help with blue screen on Windows 7
Hi guys...I was wondering if someone could help me...!
While I play a video game, I recieve a error blues screen message...I don't know if it is an error from my S.O, or it is an error for that video game...!
The message that I been given so far says :
Problem signature:
Problem
Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 10250
Additional
information about the problem:
BCCode:
50
BCP1: FFFFF900C061C770
BCP2: 0000000000000000
BCP3: FFFFF96000636D15
BCP4: 0000000000000000
OS
Version: 6_1_7600
Service
Pack: 0_0
Product:
256_1
Files
that help describe the problem:
C:\Windows\Minidump\022710-26223-01.dmp
C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xmlHi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama -
Need help changing the default Save Path
Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=trueHi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh -
Need help regarding the location of Exchange 2013 Logs for parsing
Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
MattAudit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx -
I need help updating credit card. Details as its not sllowing me to get any apps
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
hi ,
im just a mom, not very computer savy.....however, I need to change the payment method my daughter uses to purchase things on her ipad due to the fact that the current one is expiring. ie: for such things like songs and games, etc.
I would appreciate any help as how to do so.
THanksOn a computer's iTunes you should be able to edit the payment info by going into the Store > View Account menu option (if you are not logged into the account that your daughter is using then Store > Sign menu option to log out of the currently logged in account ; that will then change to a Store > Sign In option so that you can log into her account) and log into the account (enter the account's password and click View Account on the popup)
And on the account's details page there should be a payment link.
If you are doing it on your iPad then tap on your id in Settings > iTunes & App Store (if not logged into her account then log out of your account via the popup that you get and then log in with her account) and tap on 'View Apple ID' on the popup and log into the account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918 -
My daughters IPod was stolen and I need help trying to locate it?
And I dont know how to do this and really need help
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Change catalog location of Windows System Image Manager
I can't build the catalog of my image because it takes up 20 gigs and fills the hard drive. Can I change the working directory of the program to a drive with more space?
Tools > create catalog > select wim > cooks for about 10 minutes, and eats up all space on C:\ > fails because of lack of disk space.
If I could make it use F:\ it could play with 400 gb instead of my ssd. And yes, the selected wim is on F:\
Moving the executables to F:\ (imgmgr.exe and dlls) doesn't change that it wants to use C:
Do I need to change some pagefile settings around?
Mediocre Access 2010 | (Baby) Beginner C Sharp | OK at Active Directory (2012) | Fragmented understanding of DNS/DHCP | Laughable experience with Group Policy | Expert question asker on MSDN ForumsHi UpTide,
When creating the catalog, imgmgr.exe will mount the WIM file in current user's temp folder, which is under {%USERPROFILE%\AppData\Local\Temp}. See this picture:
For the Temp file location, we could change it through the following two way:
Navigate to Control Panel\System and Security\System, on the left side, click the
Advanced system settings, on the Advanced tab, click
Environment Variables at the right bottom, see:
Edit both the TEMP and TMP file location (value input) to the same location that you wanted, click OK.
Or
we may edit the TEMP and TMP value with registry:
HKEY_CURRENT_USER\Environment
On the right pane, change the above two values with the same location.
After that reboot to check if issue still insists.
Best regards
Michael Shao
TechNet Community Support -
Need help changing from CC package to Photoshop only
I purchased CC membership for one year in December 2013. As I hardly ever need InDesign or Illustrator, I would like to change my order to Photoshop (and Lightroom) only. I find managing my account online very confusing. Is there a number I could call? Or some other way to get rid of the software I don't need, and that I did not re-order after my one-year membership was over?
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Maybe you are looking for
-
I have a small problem with encoding! if I use <%include file="file.html"%> it's include that page, but if I have there czech chars, it's show as unreading chars! And it's quite bad! I try to use <meta http-equiv="Content-Type" content="text/html; ch
-
AVI to MP4 - retaining original quality.
I am converting old (1999/2000) avi files to MP4 output. I'm using CS6. What is the best export setting to do this. The original recordings were onto DV Tape. The AVI files were outputs from Premiere v5 , 5.5 or 6 (years ago) I've noticed that usin
-
Is it OK for hobbyist users to run Solaris 10 w/o a support contract?
There's been a lot of talk recently about changes to licensing polices regarding Solaris 10 and I just had a quick question: what does this mean for those of us who are primarily hobbyists and not using the system in a commercial context. I know that
-
Hello, I have been just introduced to OBIEE 11g world. I and have some basic questions as below 1. Can we refer a RPD at runtime vis-a-vis mentioned in the config file? 2. Can we have two RPDs refer at runtime? Best Regards,
-
Photoshop not updating on creative cloud, and cannot find textures
hey I need help im trying to update photoshop on creative cloud on my alienware computer windows 8 it will not update it keeps saying retry or contact support I have tried a few times but it will not update support cannot help with my enquire also I