Need help changing the default load page in Flash

Welcome,
I recently purchased a flash template. The one problem I am having is that the default page that starts up when you play the movie is not the page I want it to start on. It is starting on the gallery section of the menu item which is the 3rd tab and I wanted to start on the very first tab/menu item which is,About Us section. What steps would I take to change the default homepage so it opens on About Us instead of Gallery.
Here is an example. This is not my site but it's to illustrate what I am talking about. www.thunderfuel.com. It's like my webpage is starting up on the Web Design Tab, instead of the Games Tab which I want it to.
Thanks

That's why the gallery shows up first then, its first in the timeline. There are a number ways you can change this. 1. You might select the section in the timeline that you want to show first and move it to the beginning of the timeline. 2. You could add a simple gotoAndPlay() directive at the start of the movie to tell the playback head to move immediately to the section that you want to show first.

Similar Messages

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

Need help changing the default download location in Firefox3.6.16

<blockquote>Locking duplicate thread. 
Please continue here: [/questions/808920]</blockquote> 
I have been having default download location problem for over a year now and no one has been able to offer a solution so if you can figure this out, well, I can't say enough good about you.
Here's my problem. I'm an online math instructor for a college. I use Firefox 3.6.16, and have also tried the latest version. Os is Vista. Students email me Microsoft Word 2007 documents every day as attachments to email. I click on the documents, make corrections and when I go to save their document to my computer, the default always wants to save it in a temp file! I read where Firefox is supposed to default save in the desktop (which is where I want it to default to, but that never happens). When the save defaults to the temp file, I have to scroll up numerous files and find the desktop option and click it to save it on the desktop. This is not a huge deal until you have to do it for 90 students and then it becomes time consuming.
Numerous times I have followed the standard process of (TOOLS>OPTIONS>SAVE FILES TO DESKTOP) within Firefox but that never works. I've reinstalled Firefox, that doesn't work. I've also tried to change the "Save Options" settings within Word 2007 and that hasn't solved the problem either. Please advise if you have a solution. Thanks in advance!

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

Howto change the default error page in EP

Hello all,
I'm trying to find out where can I change the default error page when portal is loading ("application stoped...") and replace it with my own friendly message .
Thanks
Amity

Hi,
Take a look at SAP Note 795699.
Hope that helps,
Keith

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Unable to change the default login page

I would to change the default login page (to /content/ethz_ch/Login)
I configured tha page by "Day CQ Login Selector Authentication Handler":
In ./launchpad/config/com/day/cq/auth/impl/LoginSelectorHandler.config I see
auth.loginselector.defaultloginpage="/content/ethz_ch/Login"
as expected.
I then configured a page (/content/ethz_ch/de/auth_test.html) with a closed user group and left the login page field blank.
Instead on the newly defined login page I am redirected to
https://..../system/sling/cqform/defaultlogin.html?resource=%2Fcontent%2Fethz_ch%2Fde%2Fauth_test.html&$$login$$=%24%24login%24%24
Any idea on what I am doing wrong?

Try 1 & 2 if does not work please file a daycare for further assistance.
1. In "Day CQ Login Selector Authentication Handler" for path info add an empty row then verify.
2. Delete the existing entry for "Day CQ Login Selector Authentication Handler" , Configure your custom at repository level & verify

Help please, I need to change my default home page.

Hi,
Help please in changing my default home page.
Thanks

See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
 
 
'''You need to update the following plugin:'''
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

I need help changing the account number my daughter uses for payment for her apps and itunes, etc. can anyone talk me through this.

hi ,
im just a mom, not very computer savy.....however, I need to change the payment method my daughter uses to purchase things on her ipad due to the fact that the current one is expiring. ie: for such things like songs and games, etc.
I would appreciate any help as how to do so.
THanks

On a computer's iTunes you should be able to edit the payment info by going into the Store > View Account menu option (if you are not logged into the account that your daughter is using then Store > Sign menu option to log out of the currently logged in account ; that will then change to a Store > Sign In option so that you can log into her account) and log into the account (enter the account's password and click View Account on the popup)
And on the account's details page there should be a payment link.
If you are doing it on your iPad then tap on your id in Settings > iTunes & App Store (if not logged into her account then log out of your account via the popup that you get and then log in with her account) and tap on 'View Apple ID' on the popup and log into the account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

How can i change the default Portal page

When i access Portal (3.0.9) with my browser it leads me to the well known 'Welcome to Oracle Portal' page (which was installed during Portal configuration). From there i can continue to the login screen, log in and start working.
Now, i would like to change the welcome screen to another Portal Page, one with my company's info on it. Can anyone tell me how to to it?
Thanx
Ben

Just change the default page of the public user.
Regards,
Arnoud Koot
Oracle Web Consultant
http://thedoc.nl

How to change the default code page in SAP?

My colleague tries to download a report in Excel but she is having some problems with the output as each of the lines are all included in one cell. When I download the same report, my output is fine and the columns in the lines are properly aligned in various columns in Excel.
I noticed that her code page is 4110 and mine is 1160.
4110 Unicode UTF-8
1160 Microsoft 1252, Superset of ISO 8859-1
As a workaround, I just asked her to modify the code page to 1160 everytime she downloads a report. I want to know how this setting is derived.
My questions are:
1) Is there a way to set the default code page?
2) Is this a problem with the SAP version? If she downloads another SAP GUI, will the issue be gone?
Thanks!
Joey

1, You can change the codepage in SAPGUI: Select the system => Properties => Others
2, Could be, best is to have the same and most up to date SAPGUI for all

Need help finding the default payment method for supplier site in R12

I am using the following query to find out what the default payment method is for a supplier site.
select pv.vendor_id ,
pvs.vendor_site_id,
iepa.ext_payee_id,
ieppm.payment_method_code
from ap_supplier_sites_all pvs
,ap_suppliers pv
,iby_external_payees_all iepa
,iby_ext_party_pmt_mthds ieppm
where pv.pay_group_lookup_code = 'EMPLOYEE'
and pv.vendor_type_lookup_code = 'EMPLOYEE'
and pv.employee_id is not null
and pv.employee_id =92584--p_person_id
and pv.vendor_id= pvs.vendor_id
and pvs.vendor_site_code = 'HOME'
and pvs.pay_group_lookup_code <> 'ATTACHMENT'
and ((pv.end_date_active is null) or (pv.end_date_active >= sysdate))
and ((pvs.inactive_date is null) or (pvs.inactive_date>= sysdate))
and pvs.pay_site_flag = 'Y'
and pvs.vendor_site_id = iepa.supplier_site_id
and iepa.ext_payee_id = ieppm.ext_pmt_party_id
and ieppm.primary_flag = 'Y'
and pv.segment1 = '131678'
The problem is that I am returning two rows.
I have gone in to the application and changed the default payment method from 'Check' to 'Electronic' and I am able to see the change on one of the records, however I am unable to determine how I'm supposed to narrow it down to just this record. I am pulling what hair I have left out!
Please help.
Chris

Here is the generic query for some one who is faing problem like us.This query will return all the payment methods for all sites of a supplier
SELECT ieppm.payment_method_code,ieppm.inactive_date
FROM ap_supplier_sites_all assa,
ap_suppliers ass,
iby_external_payees_all iepa,
iby_ext_party_pmt_mthds ieppm
WHERE ass.vendor_id = assa.vendor_id
AND assa.pay_site_flag = 'Y'
AND assa.vendor_site_id = iepa.supplier_site_id
AND iepa.ext_payee_id = ieppm.ext_pmt_party_id
AND ass.segment1 = '10033' -- Supplier Number
AND( (ieppm.inactive_date IS NULL)or (ieppm.inactive_date > sysdate)) ;

I need to change the default network name on my iMac

I recently changed routers and my iMac keeps trying to join the "default" net work as it did in the past. That is no longer working and I need to have the default changed to the name of the new network. It keeps trying for some time (meanwhile I am not connected to the internet) and eventually the computer finds the name of the new network that works and after a long wait it works.

Open System Preferences > Network > Wi-Fi (or AirPort) > Advanced, and remove your old network from the list of preferred networks. Your computer won't try to connect to the network anymore, and it will only connect to your new router

I need help changing the previous owners id and password

I bought a use macbook Lion os-x 10.7.5 software. My apple id and password don't work because the previous owners password is still in there. I have tried to get to the Disc Utility by restarting and holding the control, alt/option and r keys but it just starts up to the normal screen. No disc utility. Any suggestions?
thanks, carl s

If you started holding the Option key, and only saw Macintosh HD rather than that and Recovery, then it seems that Recovery is missing or damaged on your computer. Some models of MacBook will start in Internet Recovery if you use Command Option R; although it seems that yours is not suitable.
If you are able to start in Single User mode (hold Command & S at the chime), then you may be able to follow the steps below to change the password. Print them out first, & make sure that you know the name of the user that you wish to change. This won't alter the AppleID name & password that were used to install previous software, so you may still need to erase & (re)install yourself; starting with the relevant install DVD(s) which are usually available from Apple for around $20, if you call with the serial number.
Start in Single User mode & wait for the :/ root#    prompt to appear
type        mount -uw /        then press enter (the slash is important)
again, wait for the :/ root#    prompt
type    passwd username
then press enter (swapping 'username' for the name you need to change the password for)
You should see
:/ root# passwd username
Changing password for username
New password:
You now type a password, which won't be shown onscreen, then press enter
then you should see
Retype new password:
type the same new password again, then press enter.
wait for the :/ root#    prompt, then type     reboot    & press enter

How to prevent the change of Home page everytime I start Firefox? Claro search starts everytime I start firefox even when I change the default Home page

http://www.claro-search.com/?affID=116677&tt=4612_6&babsrc=HP_ss&mntrId=c66222c1000000000000bc773772d22a
This link becomes my homepage whenever I launch firefox. Even if I change the homepage to one of my bookmarks, on restart it is automatically changed to the above link.

if your manual changes don't 'stick' after a restart of the browser, please look out for any suspicious extensions (like 3rd-party-toolbars or things you have not installed intentionally) presently installed under '''firefox/tools > addons > extensions''' or the programs section of the windows control panel and remove those entries.
afterwards install the search reset addon, it will revert the most common settings that got modified by adware back to the default ones: https://addons.mozilla.org/firefox/addon/searchreset/
in case this doesn't solve the issue please try this: go to firefox > help > troubleshooting information > profile folder - "show folder", then a new window will open up. in this window look out for a file named '''user.js''' (it might be used to overwrite your custom settings). in case it is present , delete or rename this file and restart firefox afterwards.
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[How to fix preferences that won't save]]

I need help changing the security key for WRT54G2 1.5

I already know the security key on my network, I just need to change it. I don't have 'cisco connect'. I've tried the web based method with the 192.168.1.1 IP and using 'admin' for the password, but that gives me a '401 Not Authorized' error. I've tried using my own security key instead of 'admin' and that doesn't work either. How do I change this. I tried to use the Linsky's knowledgebase and that didn't help. Live Chat won't help unless I'm willing to sign-up for some paid service plan, and there is no way I'm doing that. I've never heard of a company charging their customers just to explain how to do something. All I have is a simple question about how to change the network security key when I already know what it is and there is no problem with the connection. Can anyone help me. PLEASE.

If admin didn’t work, it’s possible that you might have setup a different password to login to the setup of the router when you initially set it up. Since admin and your security key didn’t work when you tried accessing your router page, the other option for you then is to reset the router. Push and hold the reset button on the router using a pin or a paper clip for 30 seconds and unplug the power cord for another 30 seconds. Once the power light goes solid, you may start reconfiguring the settings of the router. For instructions, refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection. Once you establish the wired internet connection, you may then start reconfiguring the wireless settings. Go to the Wireless tab: set the wireless configuration to manual; set a network name; then save the settings. Once saved, click on Wireless Security subtab: set the security mode to WPA2 Personal and enter a new security key on the passphrase bar.

Need help changing the default load page in Flash

Similar Messages

Maybe you are looking for