Need help cisco products.
i've got an request from an ISP for a cisco product but i really can't find a solution on Cisco web site or maybe i'm to blind to see what the product is?!!!
Product Description:
PGW 2200 Softswitch
MGC-X42K-AC216-2
PWG2000-UPG-TO-9.7.3
SFB22-upg-CC-9.7.3
SWP22-SIP-RTU
can anyone please help me define this product, i see its end of life but whats the successor of it?? thanks you...
Dear Shala,
We're happy to offer our product SVI_MGC which can not only act as a replacement for the PGW but can also provide Media Gateways Controller functionality for other 3rd party gateways such as AudioCodes & Lucent TNTs etc. Our product has been deployed in more than 50 countries around the world and our customer list includes names like Vodafone, Orange and many other Tier 1 & Tier 2 Telco's all over the world.
Please visit our website http://www.squire-technologies.co.uk/products/Cisco_SS7_Over_IP.php. for product information.
For further information and clarification please do not hesitate to contact me.
Kind regards,
Sanjeev Verma
Global Sales Director
Squire Technologies Ltd
www.squire-technologies.co.uk
Similar Messages
-
Need help on Production order confirmation cancel issue
Hi,
I need your help regarding Prduction Order issue.
We have created Production Order and issued raw materials and we done paritial confirmation also. Now the order status is PNCF.
After that we notice that it was wrong confirmation so we went CO13 we cancel those confirmations.
But in our zprogram still those order is showing as paritial confirmation order.
I need in which SAP table confirmation status stored and what will be the production order status after cancel the confirmation.
and in which table cancel production order confirmation data will be availiable.
please guide me
sateeshHI,
There is No Standard Status for Reversing or cancelling the Confirmation.
Generally, When you confirm the status PCNF or CNF gets active.
When you reverse it theybecome inactive.
also let us know, whether You cancelled or reversed the confirmation or revesed the GI postings.
If you have reversed the GI postings using Reverse Movement type or Materail documents, it is possible to have the PCNF order status unchanged.
Regards
Ratan
Edited by: Ratan on Aug 28, 2009 7:23 PM -
Need help buying products!
O.K. I found this really great site(s) with some really cheapish products. Are these sites legit? I figured some of you guys may know.
1. Hard Core Mac, http://store.yahoo.com/hardcoremac/macosxcd.html (IS THIS DISK FULL INSTALL. I HAVE 8.6. WILL THIS WORK?)
2. Other World Computing,http://eshop.macsales.com/item/Other%20World%20Computing/100SO256168/ (I NEED TO UPDAE MY RAM. IS THIS THE CORRECT ITEM?)
ThanksI have the complete iMac software bundle of 8 CDs; 10.1.3, 9.2.2, Hardware Test, Applications, Software Restore 1,2,3,4.
If you're interested e-mail me.
smileyme mac.com (insert the @)
Rick -
DEAR
i am experiecing problem on cisco unity. i have a doubt but not sure. I was configuring call management - Auto Attendant. I didn't make any big changed i just created one handler thats it and deleted later.
After that i am not getting voice mail even if i check from cisco iphone its not asking pin code and message operator not available at this moment.
i checked users are created. what coulf be the issue.Dear Mr. Mahmood;
I really appreciate your concern and solution to the point and well understanding about the issue, Thanks alot.
One more issue, recently i have configured IM & Presence 9.x. cisco jabber voice is working on android and iphone within coporate network. Like Lync Server, you don't need for any vpn because configuration on doman level. Can we do like that if not is there any VPN software which i can install on phone. we have ASA 5500 series firewall with VPN - group tunnel password. I install cisco anyconnect but there is no option for Group Tunnel Password.
Is there any best way for conectivity using jabber without coporate network please suggest me... -
Need help - Cisco ASA with FirePOWER
hi
currently we are using asa 5510 without firepower feature. our aim is to publish web servers and microsoft lync with reverse proxy method. control internet traffic , apply particular extensions file not to download , bandwidth management etc.
Is it possible when we add firepower on asa 5510 ..... please guide me.... thanksThanks for your detailed reply brother. actually we have deployed lync server 2013 with reverse proxy so it is must. see the comparison . i should go with Sophos UTM Firewall what you advice me...
Feature
Cisco Firepower
Fortinet
Sophos Utm
Firewall
✓
✓
✓
IPS
✓
✓
✓
Antivirus Gateway
✓
✓
AntiMalware*
✓
✓
Antispam
✓
✓
HTTP Proxy
✓
✓
Reverse Proxy
Partially
✓
✓
Web Filtering
✓
✓
✓
Email Protection
✓
✓
Wireless Controller
✓
Bandwidth Control
Expected in Next Year
Limited
✓
Application Visibility and control
✓
✓
✓
Data Loss Prevention
✓
✓
Advance Threat Prevention
✓
✓
✓
On BOX reporting
Limited
✓
External Reporting
✓
✓
✓
Web Reputation defence
✓
✓
✓
Failover
✓
✓
✓ -
Need help registering product I have serial numbers
I have serial numbers but they want registered, how do I get them registered?
Hi There,
Please click on the following link to chat with an expert and get some help in registering your keys : Chat
with an Expert
Regards,
Mayank -
Need help: Cisco Contact Center Management Portal 7.2(3)
Hi all,
I can not move Peripheral from a tenant to Shared folder in administration page. Any one can help me?
Regards,
ThanhThis is the error message:
Items cannot be moved outside their tenant. -
I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389. -
The product that I purchased is not working!!!! I need help and I've been stuck in your "Contact us loop" for the last few days and I'm getting frustrated. How do I contact you for HELP!
Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a long dead product used by big companies, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (please check your invoice, as Adobe have many similar products), and we can perhaps direct you. Good luck!
-
on Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.
The ID Program folder will be relevant to your OS...
I took a shot and right clicked on my Scripts Samples, choose reveal in Explorer and opened up the ID Program folder.
As shown, there is a Fonts folder.
Drag/Copy/Paste fonts to this folder. -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
-
Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help
Hi shannonr98244154,
Flash player is not supported on mobile devices
-Varun -
I need help configuring three products: WRVS4400N, WAG325N and WVC200
Hello,
I want your help in three linksys products as mentioned below:
WAG325N ADSL2+ Router
WVC200 PTZ CAMERA
WRVS4400N VPN Router
The computer connections and configuration of above linksys products which I am working with and which are connected with the above three linksys products at present are as follows:
1) I have one server and one laptop.
2) Laptop has two wireless adapters which I use to connect to the routers.
3) The server is connected to the WRVS4400N Router through one of the four ethernet ports mentioned on backside of the WRVS4400N Router. The DHCP of this router is disabled by me and the router's default IP 192.168.1.1 was changed to 192.168.1.12
4) The WRVS4400N router is connected to the Wag325N router for internet access to the server and server is connected to WRVS4400N Router as mentioned in point number 3 above.
5) The WAG325N router is setup as per the instructions mentioned that came with the CD of this router. The only change that I have modified is the router's default IP. I have changed the default IP of WAG325N from 192.168.1.1 to 192.168.1.13 and DHCP is enabled on this router.
The help that I want is step by step as follows:
1) I want to configure the both routers in such a way so that I can access them from anywhere across the world i.e. remotely using internet.
2) I have WVC200 Camera which I setup according to instructions mentioned in the CD and also configured the DDNS service. But when the " RJ45 Cable is connected " to my WAG325N router and Camera, then only the camera works properly. What I want is that after the setup is completed, I want to remove the RJ45 Cable connected from my camera to router and use the camera wirelessly from any location within the range of my above mentioned WAG325N router. I need flexibility to use my camera without cable connections from any location and any rooms of my house. I also configured the port forwarding and DDNS properly. The only problem is that if I remove the Cable after the setup of camera is finished, then the camera access is not working on LAN or internet(through DDNS). Whereas the same works on LAN and internet using the DDNS service, when the cable is physically connected to the WAG325N router. Also I want one more thing additionally other then this. I want to use this camera wirelessly by configuring the port forwarding options on both routers at a same time(i.e. simultaneously at once on WRVS4400N and WAG325N).
3) Now as two DHCP cannot work at a same time and as my routers are connected with each other, So I have disabled the DHCP on WRVS4400N. Here I need help so that DHCP can be enabled on both at a same time. Because if the DHCP is not enabled on WRVS4400N then I have to give IP to the server which is connected with server. If I enable the DHCP then there are two DHCP's at a same time on same network and thus problems occurs in internet access to the server. So, what should I do in such a way so that I do not have to give any IP to my server and set it to automatic.
4) This question is just for my knowledge so that I can use the above mentioned linksys purchases upto full extent possible in future. I want to know what is VPN and how is it usefull? What is the difference between VPN and VPN tunnel? How can VPN be used to access all my network resources connected with my server in the above situation where my server is connected to WRVS4400N which in turn is connected to WAG325N?
Thanks !
Sincerely
Kalpesh Sharma
+91-79-25351208
+919227435453
Ahmedabad, India.for question number 1:
you said that your main router is WAG325N, for you to remotely access the 2nd router is for you to forward the IP addr [192.168.1.12] on your first router and change its management port of your second router that is located on either the security tab or the administration tab on its User Interface
to access your first router open and Internet Explorer and enter
http://[public IP addr]:[management port]
the PUBLIC IP or INTERNET IP is located on the status page of your router
to access your second router just change the management port to
ex.
http://66.77.88.99:8080 first router
http://66.77.88.99:8081 second router
for question number 2:
make sure that you have configured all wireless settings on both your camera and your main router WAG235N, once done save settings and power down your camera and power it back up.
for question number 3:
for you to enable DHCP on both routers your connection can go like so...
from a regular port of your main router going to the INTERNET port of your second router [this way you can enable DHCP on both routers]. INTERNET is no problem, your cesond router will be able to get connection
for question number 4:
VPN - Virtual Private Network
VPN tunnel -is/are connections from router to router [gateway to gateway]
VPN is used to connect a diff network on a diff location for you to have access to the shared filed [it is like a file sharing through the internet]
for you to be able to use VPN tunnel you have to connect to a different VPN router on a diff location. In that way you can get access to the other network -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
I can't get the product i bought need help NOW doesn't let me connect when i have good internet
i can't get the product i bought need help NOW doesn't let me connect when i have good internet
[personal information should not be posted - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
https://www.adobe.com/account.html to check your subscriptions
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
Maybe you are looking for
-
Firefox opened today at 5 pm. I closed it when finished, then tried to reopen it about 6 pm - it will not open. I have tried several times in the last hour and it will not open. When I attempt to open Firefox, the 'busy' circle spins for several seco
-
How do we view a list of the temporary and free sites we are using?
Adobe Web Host - Free Sites / How do we view a list of the temporary and free sites we are using? When logged into Creative Cloud we used to be able to see the temporary and hoe many of the 5 free sites we were using. Can't find a list on my Creativ
-
I am having a problem with getting my form to submit as an attachment once the submit button is clicked. What I envision happening is , a form is completed on line from my website, the user click the SUBMIT button, the email box opens , receipent ad
-
Safari 4 will not import bookmarks saved with Safari 3.2.3!
Safari 4.0 (Build 530.17) for Windows DOES NOT correctly import bookmarks saved with Safari 3.2.3 for Windows!! There are no links!! But it does import the folders. For example if I open the bookmarks in Safari, it looks like an HTML file. It says th
-
Nokia N95 (CAN'T ABLE TO BROWSE WAP IN 3G)
Dear Experts, i am facing a problem in 3G service in NOKIA N95. i am having the service of 3G when i will connect the internet via WAP it will connect but i cannot able to browse or open any web page and if i will discoonect the wap and try to connec