Need help!! Compaq V3500 No audio driver available in website

Need Help Compaq V3510TU P/N GG201PA#AKL Windows XP Professional 32 bit, After I re installed the new OS..
The windows doesn't have the audio driver. I tried everything download many of Conexant HD many many version...
they don't work at all.
Please tell me what you should do next
P.S. Last year I came to hp website, it provided many driver in windows xp but now nothing... where 'd they gone???
I tried these, but didn't work
sp36509
sp35682
and many many of them
This question was solved.
View Solution.

Hi:
Please read the XP downgrade guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The instructions for installing the audio for your model can be found under the section labeled 1. Easy Models
More than likely you didn't install the required MS UAA driver before installing your audio driver.
You will need to uninstall any audio drivers you tried before installing the MS UAA driver.
Paul

Similar Messages

Need help with the T400 audio driver.

I recently purchased a refurbished T400 (type 6475-GS6) at a great price. I've installed XP 64, downloaded then installed all, or what I thought was everything from the Lenovo web site.
But for the life of me, I can't install the Conexant audio driver because the device driver installation wizard can't find the device for the driver.
Does anyone have a suggestion?
Thanks in advance for your time and help.
Dale

You might need KB888111.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Need help regarding 5.1 audio on sblive va

dear users,
i m tight on budget thats y cant afford the audigy series or any new hifi cards.. i need help in activating 5. audio on my sbli've value card though old but i always love it.. theres a feature li've surround and when i activate it my surround mixer shows fi've speakers and sound comes from 4 speakers i wonder how can i connect the 5th speaker.. 2ndly there r two analog outputs on the card which connects front two and rear two speakers theres another spdif output now is that to connect 5th speaker? also plz guide me about the spdif cable which will connect with sbli've value cards and how can i get its output from ? i m really amauter in this stuff plz guide and help me thanks
regards
muddassar

Muddassar,
The SB Li've Value is only a 4/4. speaker system card and that does not support a 5. speaker as you would not have the available jack for such connection.
Jason

I need help finding this hp hard drive for dv6521eo

I need help finding this hp hard drive and memory for dv6521eo

Hi:
You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
Memory is PC2-6400.
Paul

Need help with networking external hard drive

Hi,
I am working on a corporate network and I have a Western Digital My Book Studio Edition external hard drive attached to a Mac OSX 10.4. i have other Macs connecting through the network to this Mac and accessing the external hard drive and it works just fine for that.
What I need help with is the fact that I also have several PCs on the same network (all XP), that need to connect to the hard drive and access the files. I've been able to connect to the Mac using the XP by accessing the IP address. I also set the Mac up with password credentials so that I had to log in to the Mac to access the files. But when I try to access the Mac, it only shows the main computer drive as the only available share and no external drive.
Does anyone know how to access a Western Digital external drive on a Mac from a PC through a network?

For an external hard disk drive or other (different) system shared
storage devices to work, they probably should be formatted in a
format seen by both operating systems.
If the WD unit is not seen by Windows computers on your network,
the WD may have been formatted in HFS+ for the Macintosh. That
is OK unless you need a Windows computer to access the same.
The Macintosh can see and use a standard Windows disc format;
so the external drive may need to be reformatted away from HFS+
if that is really what is going on (and archive any data on the suspect
drive elsewhere, since it will be lost to reformatting overwrites)
and then both Mac OS X and Windows should see the files on there.
And Macs set up to run Windows may also see the non-Mac format;
without having to re-boot via BootCamp, if that option is in use.
As to the other question(s) I really have no idea at this point in time.
And since that may be the rub, hopefully someone will follow up here.
Good luck & happy computing!

Need help setting up external hard drive for FCE project

Hi folks,
Basically I am looking at making a 20-30 minute video this summer of my motocross adventures and what not and have equipped myself with an iMac (2.93 GHZ Core2Duo 640GB 4GB) and of course, FCE. I have tried smaller projects before (ranging in length between 20 seconds to upwards of a few minutes) but have noticed an overall decline in computer speed which I am under the impression is being caused by the 10s of GBs of video project files and what not that seem to be scrawled away within my computer. Before I made any videos, my computer was sitting around 560 GBs of free space. Since making maybe 3-4 videos (50/50 iMovie and FCE) its down below 400GBs. I'm not sure whether it's the raw video files or the projects themselves that are so large, but it's slightly frustrating. Is there any sort of software (either third party or apple) that can look at your hard drive and tell you exactly where all the biggest files are? I'll post this question in the iMac forum as I realize this is for FCE, but I thought if anyone knew of one it would be extremely helpful.
Anyways, I have a SimpleDrive 320GB external HD that I plan to use as my external for making this project within FCE and would like some help in terms of how to set it up with FCE, what are the best settings etc. It is currently formatted with Windows, so I will also need help in setting it up for a Mac. I do have about 120GBs used on it already and was also wondering if I could keep this when re-formatting, but I'm pretty sure I already know the answer to that.
Sorry for the long-winded post; any information on this or something related would be fantastic. Thanks.

Yes, you can use your external HD with FCE ... provided it is formatted as +Mac OS Extended+ and is connected via FireWire.
You will need to back up any data that is on the drive that you want to keep. Before reformatting it. Formatting erases everything that is on the drive.
Use Disk Utility (located in your +Applications > Utilities+ folder) to format the drive.
After formatting the drive, go into +FCE > System Settings+ and change your FCE scratch disk location to the external drive.

Need help dealing with nested audio in Premiere Pro CC 7.2.2

Hi, so previously I have been working with nested multicam video and nested audio together (one video track, and one audio track).
However, I am hitting some issues with the nested audio workflow, and am hoping someone could help me iron out my issues.
1. Once I've completed my edit, how do I efficiently flatten my nested edits so I have all of my original audio back? (For mixing purposes)
2. Audio nesting sometimes seems glitchy. When making new nests, sometimes I will only get the topmost audio track in my nest, and I'm not sure what's causing that to happen.
I REALLY need helping getting my workflow together, as it's at a bit of a stand still right now. I think I'm going to switch to unnested audio to avoid issues, but still need to flatten my existing edits to do that as well.
Many thanks!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

Help!! Dowloaded Audio driver file corrupted

I downloaded the audio driver 'ADI SoundMax AC97 Integrated Digital Audio Driver' from HP site. When I tried to install it, the error message appeared to be 'The contents of this file cannot be unpacked, the executable you are attempting to run has been corrupted' . Please, is any one out there could help me to solve this problem?
PS: my PC's model is Evo D510 CMT
Driver downloaded:
Type: Driver - Audio Version: 5.12.01.3620 Rev D (23 Jan 2004) Operating System(s): Microsoft Windows 2000, Microsoft Windows 98, Microsoft Windows XP Home Edition, Microsoft Windows XP Professional File name: sp27103.exe (14 MB)

Try rebooting the computer and download again.
If not try to click Install only instead of Download only on the link.

Need help recovering files form external drive!

Well, I made a stupid mistake this morning. I am used to the Windows style of copying where if you have folders with the same name and it asks if you want to overwrite the folder, it typically merges the contents.
Apparently in OSX, when you overwrite a folder, it removes the content from the previous folder and proceeds to copy the folder..
So I went to backup from my laptops drive to my external and I copied the folder and it asked about the overwrite and I said okay and instantly had the thought that it was a bad idea and stopped it after only two images and the drive works perfectly fine, just missing a lot of images.
So how can I recover these images? I haven't used the drive since to ensure that I didn't overwrite the files... What recover software do you recommend for OSX? Especially looking for a free solution.. I don't have $80 to plop down on a more conventional program. Also, are there programs that can place the images in the folders they came from? Would take a while to try and restore my folder structure as well...
I did try the program PhotoRec that is free and open-source but it searches the whole drive and can't focus only on deleted files with the HFS+ file structures, which means there will be TONS and TONS of images that it 'recovers' that are already just fine on the drive.
Any help is GREATLY appreciated! I 'lost' nearly the whole years pictures. But I know they are all still there.
Thank you, thank you, thank you...
- KS

There isn't a free solution for data recovery, and even the commercial solutions may not be able to recover all the files, since you had already started writing to the drive.
More importantly, you said you deleted files from your backup drive, right? So, if it's a backup, don't you still have copies of those files elsewhere? If you don't, you need to quit thinking of this drive as a backup, because it isn't a backup if it contains the only copies of the images on it.

Captivate 7: Need help to diagnose background audio which increases suddenly mid-video.

http://www.youtube.com/watch?v=6hQ1GJpVQNU
I inserted a music file into the video background. At 1:39 you'll hear the background music suddenly jump up in volume.
When I imported the audio file to the background, I edited it by adjusting the volume. The volume was reduced appropriately in the preview, however, as you can hear, it jumps significantly. There is nothing I can see either in the audio file - or in the other elements that may cause this.
I've tried deleting and re-importing and changing the volume using the threshhold/ ratio settings (versus just the volume bar), but nothing changes that jump.
Any help is appreciated!

Thanks for considering the problem! Unfortunately, as I stated above, the voiceover needs to be a background audio file that plays throughout the project. It's not possible to record audio-per-slide because of the structure of the video - and because I do a lot of editing of the audio files for 8-minute videos.
FYI - I was able to have a chat conversation with a support tech. Here is the transcript of that chat:
Anvinder: We have not tested the workflow of captivate 7 with yosemite so far.
Anvinder: You might find some inconsistencies.
AMANDA: So, is there no solution to this error?
AMANDA: Do I need to publish the entire project every single time I make a small change?
AMANDA: Has Captivate 8 shown this error in Yosemite?
Anvinder: In order to make the changes evident in the output you need to publish the whole output.
Anvinder: Amanda, the best practice is to publish the whole project.We are in testing phase for the same. You can download the trial version of captivate 8 and work on it on yosemite.
If you have a suggestion for a better workflow for creating tutorial videos (ultimately published to YouTube) that need to include the following, please share!
a voiceover
heavily animated explanations of concepts
live screen capture of business processes in software
Thanks!

Need help picking the correct hard drive upgrade for my MBP

I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
Suggestions and recommendations very appreciated.

It will take almost any 2.5 inch sata drive.
Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
I'll start you off..
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

Need help to reformat the disk drive

Hi Guys,
I have a Powerbook G4 and I am trying to reformat my hard drive to be case insensitive instead of sensitive. The only problem is I don't have my installation disks. Is there any way i can reformat it without the disks? And if I do need a c.d. rom where can I get one?
Need help!!!
Thanks

Just to be sure . . .
You are aware that reformatting will erase the drive, right?
So if you want to keep any data, you'll have to figure out how?

Need help getting current/default audio playback device from VISTA

Hello,
I need to get the current audio playback device in VISTA.
It's easy enough in XP as I just get this information from the
registry. My understanding is that things are different under
VISTA. I was told you can't change the device but you can get the
device using the following...
--CoCreateInstance(IMMDeviceEnumerator)
--IMMDeviceEnumerator->GetDefaultAudioEndpoint(eConsole)
Problem is I don't know what to do with that. I assume it
needs to be compiled with some library (compiler, library, etc... I
don't have)
So... question, is there already an xtra that can get this
information OR... can I pay someone to make an xtra using the above
info?
If you are able/willing to help, please let me know asap as
project is due next week. I can pay you through paypal.
Thank you!!!!!
[email protected]

http://www.schmittmachine.com/asPitchDetect.html
Antoine Schmitt at that url builds Xtras and his
asPitchDetect Xtra can get info on recording devices... try
contacting him and he might be able to help you with a custom Xtra
to get info on playback devices in Vista.

I am a noob and need help.nvidia windows kernel mode driver stopped responding

Hello
I am a noob and need help. It happens when I run in SLI.
I keep on getting this error message: "nvidia windows kernel mode driver stopped responding and has been recovered." In most cases, screen freezes so I have to reboot.
Thanks for the help
S/N602-V282-22SB1307082992
602-V282-22SB1307082991
601--7811-010B1306093332
BennoSne
Video card driver version 337.88
Board: MSI z87 xpower
Bios: Version 1.7
VGA:2 MSI 770GTX Twin Frozr 4gb oc SLI
Intel Core i74770k 3.5GHz
MEM: Kingston KHX21C11T3K4/32X 32GB
HDD: Samsung 256gb SSD pro
COOLER: Corsair 80HWater Cooler
OC: (3,5) Normal mode
OS: Windows 8,1 64bit Professional
PSU: SilverStone ST1500
3.3V +5V +12V1 +12V2 +12V3 +12V4 +12V5 +12V6 +12V7 +12V8 +5VSB -12V
40A 40A 25A 25A 25A 25A 25A 25A 25A 25A 6.0A 0.5
Benchmark 3D Mark 11 score 12831 SLI

do you have any OC applied?
does it worked before or its a new build?

I am very new to Mac Mini and need help transferring files to thumb drive

I want to transfer the Mac Mini user guide (manual) to my thumb drive but do not find how to do it. Help, please!

The thumb drive is on the desktop. This is the most embarrassing question I have had to ask in public in a long time, but, how do you drag something. When I try by holding down my mouse on the file name I want to move it doesn't drag it just gives me several other options. I left Microsoft for this and I know nothing about Apple computers except for my iPad.

Need help!! Compaq V3500 No audio driver available in website

Similar Messages

Maybe you are looking for