Need help concerning computer case size

Hello support forum goers
I am looking to upgrade my GPU and PSU but I don't know if they will fit inside my case. I have already checked that they are both compatible with my motherboard, so my only concern is whether it will all fit in my case. Here is my computer (I do not know how big it is) and here is the card I want , and here is the PSU I want. By the way all the links will open in new windows, so no need to worry about that. Just from eyeballing it, my case is roughly 9"x15"x20" or so.
Thanks for the support.
This question was solved.
View Solution.

Hello IAmTheWalrusss,
I understand that you are inquiring as to whether the video card and power supply you are wanting to install will fit into your HP ENVY h8-1520t CTO Desktop PC. I could just say YES they will fit, but I am going to include a couple documents. The first is the HP Support document: Replacing the Power Supply in HP Pavilion HPE h8-1000 and HP ENVY 700 Desktop Series PCs and the second is the HP Support document: Replacing the Graphics Card and Expansion Cards in HP Pavilion HPE h8-1000 and HP ENVY 700 Desktop S..., both of which will walk you through the process of replacing the graphics card and the power supply on your computer.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

NEED HELP...FORMATING SIZE PROBLEM

I've been succesfully building and formating projects that only lasted 30 minutes.
I'm having some problems with my latest project (1 hour and 20 minutes)...
I did compress with "90 minutes best quality".
and when I import in dvdsp, the file size is 6 GB.
Now it won't format into a blank dvd-R.
I am kinda new at this and need to put it on a dvd for a client.
Could somebody tell me what should I do ?
Should I compress again or can I still burn it with another form of blank dvd?
I need help...
Thank you.

Make sure to select A.Pack/Dolby (make sure that file is made) and use that in the project, not the .aif file

Need help to find image size box

I am a novice, I need to find the image size box on illistrator but not able to so please explaine how to find it on the page. Thanks

You may also be talking about the "Info" window. To open it, go to Window > Info or hit command+F8. It will show you the dimensions of the bounding box containing whatever object you have selected.
Please let us know if we can help you further.

I need help to set font size in mail os x 10.9?

Just upgraded to os x 10.9 and mail messages display at a very small font and can not be expanded by spreading fingers on screen as was the method prior to upgrade. Have thus far not found a way to change the default size. Would appreciate any help.

No computer that runs Mac OS X 10.9 can change the size of things on screen by touching the screen -- the screens are not touch sensitive.
Those settings are in Mail > Preferences > Fonts & Colors

Need help concerning iyogi tech company

I called iyogi by mistake. i was going to transfer files to my old mac pro to my new mac pro. they kept saying they could do it and wanted $375 for a 5 year contract. I declined and after 59 minutes finally got off the phone with them. My concern is I stupidly gave the access to my computer and I am afraid the possibly copied my files which has very personal information ie pass words ss# etc. My question is has any one ever had any bank accounts or identity stolen from this group?

Since "iyogi" is a scam and the person to whom you gave remote access is a criminal, you have to assume the worst.
If you know or suspect that a hostile intruder has either had physical access to it, or has been able to log in remotely, then there are some steps you should take to make sure that the computer is safe to use.
First, depending on the circumstances, computer tampering may be a crime, a civil wrong, or both. If there's any chance that the matter will be the subject of legal action, then you should do nothing at all without consulting a lawyer or the police. The computer would be the principal evidence in such a case, and you don't want to contaminate that evidence.
Running any kind of "anti-virus" software is pointless. If I broke into a system and wanted to leave a back door, I could do it in a way that would be undetectable by those means—and I don't pretend to any special skill as a hacker. You have to assume that any intruder can do the same. Commercial keylogging software—which has legitimate as well as illegitimate uses—won't be recognized as malware, because it's not malware.
The only way you can be sure that the computer is not compromised is to erase at least the startup volume and restore it to something like the status quo ante. The easiest approach is to recover the entire system from a backup that predates the attack. Obviously, that's only practical if you know when the attack took place, and it was recent, and you have such a backup. You will lose all changes to data, such as email, that were made after the time of the snapshot. Some of those changes can be restored from a later backup.
If you don't know when the attack happened, or if it was too long ago for a complete rollback to be feasible, then you should erase and install OS X. If you don't already have at least two complete, independent backups of all data, then you must make them first. One backup is not enough to be safe.
When you restart after the installation, you'll be prompted to go through the initial setup process for a new computer. That’s when you transfer the data from a backup in Setup Assistant.
Select only users in the Setup Assistant dialog—not Applications, Other files and folders, or Computer & Network Settings. Don't transfer the Guest account, if it was enabled.
Reinstall third-party software from original media or fresh downloads—not from a backup, which may be contaminated.
Unless you were the target of an improbably sophisticated attack, this procedure will leave you with a clean system. If you have reason to think that you were the target of a sophisticated attack, then you need expert help.
That being done, change all Internet passwords and check all financial accounts for unauthorized transactions. Do this after the system has been secured, not before.

SERIOUSLY NEED HELP! Computer trying to display tons of jpegs when booting; causes computer to freeze.

Please help me. This is a terrible situation. Last night, I was making a movie with iMovie and trying to find a way to export it that would be compatible with the item on which I am going to be displaying it (an Epson MovieMate via a USB Thumb Drive). I was SO frustrated that none of the formats iMovie could export in were compatible with the MovieMate, and also frustrated that the software I found to convert it from one of the iMovie formats to a format usable on MovieMate wouldn't convert the entire movie for free in its trial version, only half the movie.
Desperate for a solution, I was going through all the different ways iMovie could export, and I found it odd, but I found this jpeg one. Knowing that jpeg is a format for still photo files, it did strike me as odd, but I thought I would give it a try and see what would happen. After all, my "movie" is just one still photo with music playing for a half-hour. It said it would take over 40 minutes to create the "movie," so I went to bed.
To my shock, when I got up this morning, my computer was freaking out. It said that it had no more memory left or something like that, and prompted me to quit a bunch of open programs that weren't responding. I tried to do this, but it just wasn't handling things. Eventually the clock stopped progressing but I could still hear the processor working, so I just hoped it would work through the issue then snap out of it sort of, but instead, I eventually stopped hearing the processor sounds, and the cursor was also frozen. At this point I could see the whole computer was frozen, so I held down the power button for a few seconds to force the computer to turn off.
When I restarted it, it was trying to re-start all the applications I'd had open previously. After several minutes of trying to get it to quit all these things, it finally did, but nothing was displaying on my desktop yet. Normally there would be a HD disk image and a few folders. I had seen in a Finder window that there were tons of jpeg files supposedly on the desktop (where I had designated the file to save to), but I couldn't see how many. It never occurred to me that this is how iMovie would render things when I told it to save the project in jpeg format. I expected one jpeg file, not some tremendous and unknown amount.There may be hundreds or thousands if it created a jpeg for each "frame." Even if it created one jpeg file per second, that would be 1,800, and I suspect there's more than that. There could be several per second. Five per second would be 9,000 jpeg files. I hate to think but there may be a whole lot more than that even.
Finder continued to "think." I was never able to access it to do anything with it. There was a "stuck" Finder window which was displaying the Desktop folder, which is how I saw that there are multiple jpegs there. After a few minutes, I re-launched the Finder and was able to command it to not try to open a Finder window upon re-launch. After it re-launched, I could hear the processor working for a few more minutes. I think it obviously was working to display all the files on the desktop. The clock froze again, and the cursor movement was jumpy. Shortly, the cursor would not move anymore, and I could not hear the processor sounds anymore. The computer was frozen again. I held down the power button again to force it to shut down. When I re-started it, I logged into the Admin account (which I am using right now), which is the only way I think I can use my computer right now. I was also hoping I could access the files from the Admin account and just get them to display in a window so that I could delete them. I just want to delete them at this point. I wish I had never done this! I wish iMovie didn't even have that option or that iMovie would have explained to me what was going to happen if I were to proceed! I don't use my Admin account very often and wasn't really sure what it would be capable of doing. I can open a Finder window and access my Time Capsule, which contains something that looks like my hard drive image but when I double click on it, I get an error that says The following disk images could not be opened Macintosh.sparsebundle: Resource temporarily unavailable.
Anyway, please help! What do I do to get my computer back to normal??? I just want all those jpegs deleted and want to be able to log in and boot up like normal! This is a terrible situation as I use my computer for work and everything. I was needing to print some things for a presentation tonight. Please help me! Thank you!
Melanie
P.S. I just now got a Time Capsule backup message that came up and said Time Capsule could not complete its backup because Time Machine is unavailable! I am concerned this jpeg situation has gotten completely out of control and has gone beyond affecting my computer to also affecting my Time Machine!
(Also, additionally, assuming I can get my regular user account to boot up again at some point, if anybody happens to know how to get an iMovie file to save as .mpe, .mpg, .mpeg, .dat, or .vob, that information would be greatly appreciated.)

It worked! Thank you! I finally just finished about 20 minutes ago! It took over 26 hours to complete the process you described, but I stuck with it and it worked. I am glad I didn't give up or "forget it" as some might have suggested. That would have set me back until tomorrow!
Ultimately, it turned out there were 45,910 jpgs created. No wonder it took so many hours to render/display them all. It ended up being about 10 hours before it seemed they were all rendered but the process between them displaying and being able to start really deleting them took a few hours because partly I was asleep and also partly it took forever to do anything. Any action as simple as selecting and right-clicking to Get Info, or emptying the trash, would take 20-30 minutes, a couple times longer. The clock stopped many times for 20-30 minutes at a time, a few times over 30 minutes, before catching back up. My cursor never froze which is what really kept me going, although it was a spinning beach ball for most of the time. I was never so relieved to see my regular cursor as opposed to seeing a spinning beach ball as I was early this morning after about 10 hours!
Once I was able to open a Finder window and select all 45,900 files (I had already deleted 10 in the previous couple hours during experimenting of trying to figure out what would work best), then right-click and select to move all the files to the trash, the process of moving them to the trash took 4.5 hours. Then deleting them from the trash took a couple minutes. There were 21.4 GB!!! No wonder the whole process took 26 hours!
mende1, thank you so much!

Need Help Escalating My CASE!!!

I'm starting to get extremely frustrated. It's been over 6mths without my computer, I've spent many hours I dont have on this chasing down customer service. customer service keeps promising me a call back and nothing has been done to resolve my case.
Long story short ... I sent my IdeaPad t400 for repair about 3 months ago to a place out in Grapvine, TX and within a few weeks recieved a notificatin advising all issues have been fixed and we should recieve laptop shortly in the mail. A few days later I received the laptop in worse condition. Powered laptop and it had a black screen with a media missing message and a day later a harddrive was sent seperatly? Hmmmmmmmm after more hours researching I finaly was able to determine the harddrive that was sent was the one for my laptop. WHAT and HOW and WHY??? !!!
More hours on the phone with techincal support and the warranty department. Finally, the case got escalated and a replacement system was supposed to have shipped out 2 weeks ago but the agent handling my case has stopped responding to any communication.
Two months have past and I have no updates. I advised the agent I needed a working system soon, they agreed to escalate it. then exchanged messages and calls with Crystal Holeman who indicated a replacement new system would be shipped out in 7-10 days since there was no ETA on my repair. That was almost 2 months ago. I've sent daily emails and called her almost every day--SHE will not respond. SHE is the worst customer service MANAGER there is I have no idea why she stills works there. This is not the fist time they see her names in threads this is LUDACRIST for someone who is management not to respond or better yet set examples for her employees or the company.
Need this computer for work. been an incredible waste of time already to deal with this and extremely disruptive.
can someone PLEASE help me get this addressed ASAP?
Case Number: 8003909099
THANKS!
Andreu
Moderator edit: Material which breached Community Guidelines was deleted

http://www.apple.com/support/itunes/contact/

NEED HELP: Problem with Canvas Size in Crystal design/report.

Hello,
I am having some trouble with one of my reports, the canvas size is so much bigger than my design/report, which is causing it to preview really small. I have gone into the document properties and tried to change those settings, I have also used the tools to try to make the canvas size smaller, it seems as thought nothing is really working. When I use those tools it cuts off part of my report and also adds huge scroll bars into my design... Does anyone have any insight on this? It would be a great help.
Thank you,
Kerry Jenkins
Harte-Hanks Analyst

Hi Kerry,
Are you using Crystal Reports Designer or BusinessObjects designer ( what ever it was called ) Crysstal Reports 5 was released in the summer of 1997 and definitely did not support a flash file.
Need more info and details on the versions you are using and info on the Clients portal, Is it Businessobjects Enterprise 5.1?
Thank you
Don

Need help with computer freezing up.

I seem to be having some trouble with my computer freezing up from time to time. Usually it's when I'm using the program Transmission or Toast Titanium. I can't access the applications files, the Dock icons or do any force quit on the programs. Also I can't do a restart or shut down. I have tried using the keystrokes to shut down and restart, but as well this doesn't work. Everything gets frozen. The only way I can stop the freeze is to manually turn the computer off by the on/off button in the back of the computer. I have heard it is really bad to do so. What else could I do when the computer is frozen like this to get it unstuck? Also being that this has happened a few times, how do I correct the programs so that it won't keep happening?
Thanks.

Hi,
When you run a program in Mac it loads the necessary information to the RAM and access it from there. If other programs are running in the computer along with the Toast Titanium then there is a possibility of the memory unable to address all the requirements. The best way is to keep an eye on the memory usage from Activity monitor when you start using the Toast next time.
While trying to burn the data into a CD the files are first loaded into the memory so that it will be written to the disk. So what I will suggest is to close all the applications and wait for a reasonable amount of time to see whether the computer frees up memory and starts to write onto the disk.
If not, you will also need to free up some hard drive space.
Also in the ~/Library/Logs/Crash Reporter look for crash files and see what is causing the issue.
Shutting down the computer with the Power on/off button is not that good however if nothing else is working, you have no choice other than that.
Hope that helps....
I wanted to add few more tips.

Need help to change the size of the Tablespaces.

Hi DBA's
Kindly help me on bellow tablespaces, which are the tablespaces need to increase the size in my R12.1.1 Instance? what size should i increase?
TABLESPACE_NAME SIZEMB FREEMB
APPS_TS_QUEUES 1000 894.88
CTXD 19 1.79
OWAPUB 10 9.92
APPS_UNDOTS1 1802 4
APPS_TS_NOLOGGING 64 25.63
APPS_TS_ARCHIVE 866 367.25
APPS_TS_TOOLS 500 499.88
APPS_TS_TX_IDX 7736.75 722.63
XXKGI 100 99
APPS_TS_SEED 2982 388.5
SYSTEM 12012.1328 1169.96
APPS_TS_INTERFACE 1041 253.63
ODM 11 1.44
PORTAL 100 99.53
APPS_TS_TX_DATA 5680.125 512.63
OLAP 17.2421875 1.75
APPS_TS_SUMMARY 1146 253.25
APPS_TS_MEDIA 1446 276.88
SYSAUX 472.6875
Regards,
SG

SG,
Kindly help me on bellow tablespaces, which are the tablespaces need to increase the size in my R12.1.1 Instance? what size should i increase?You are the best one to tell which tablespaces need to be increased (based on your monitoring to the datafile growth). I always keep 30%-40% free space in the tablespaces and get an alert when the used space go beyond that limit.
Another option is to enable AUTOEXTEND so you do not have to worry (assuming you have enough space at the OS level).
How To Check For Autoextensible Datafiles Set To Maxsize Unlimited [ID 468096.1]
How to Determine if a Datafile has AUTOEXTEND ENABLED [ID 1023280.6]
Thanks,
Hussein

Need help setting the exact size of my JSlider

Hello everyone. I'm trying to build a small program to help people learn a about RGB colour values, and at the same time teach myself a bit more about Java. Things have been going fine so far until I came to setting my JSlider's size. The intention is to have three JSliders with a JPanel next to each. The I need the track of the slider to be exactly 256 pixels tall (one pixel per gradient value painted into the adjacent JPanel) plus whatever extra padding and spacing the Look And Feel dictates.
I've got the height set to 256 pixels in the following code, but it makes the JSlider as a whole 256 pixels tall and so squishes the track. I've set the minor tick spacing to 2 so that if the track was actually 256 pixels tall, the ticks would alternate over each screen pixel. If you compile and run the code, you will notice that a few ticks appear next to each other without a one-pixel gap between them. I've also verified it by taking a screen capture, pasting it into the GIMP and then using the measure tool to check the size.
I've tried searching through the API documentation to find ways of doing it, or to see if some ideas I've had so far were possible, but so far, I've not found anything particulairly satisfactory. I even tried to see if I could set the JSlider size to current JSlider size minus the track size, plus 256, but I couldn't find a way of getting the current size of the track.
Can anyone help me out here? I'm rather stuck.

Here's the code with all but the JSliders stripped out. Sorry about having to put it in a seperate post; the forum wouldn't allow it.
Here's the code I have so far:
package com.stephenphilbin.colourcoder;
import java.awt.Color;
import java.awt.Dimension;
import javax.swing.GroupLayout;
import javax.swing.GroupLayout.Alignment;
import javax.swing.GroupLayout.ParallelGroup;
import javax.swing.GroupLayout.SequentialGroup;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JSlider;
import javax.swing.UIManager;
import javax.swing.border.LineBorder;
import javax.swing.border.TitledBorder;
public class Colourcoder extends JFrame {
    private void initComponents() {
        String colourcoderTitle = "Colourcoder";
        String lightsPanelBorderText = "Lights";
        // Create the lights panel, set the borders and set up layout references
        JPanel lightsPanel = new JPanel();
        TitledBorder lightsPanelBorder = new TitledBorder(LineBorder.createGrayLineBorder(), lightsPanelBorderText);
        lightsPanel.setBorder(lightsPanelBorder);
        GroupLayout lightsPanelLayout = new GroupLayout(lightsPanel);
        lightsPanel.setLayout(lightsPanelLayout);
        // Initialize each light slider
        JSlider[] lightSliders = new JSlider[3];
        for (int i = 0; i < lightSliders.length; i++) {
            lightSliders[i] = new JSlider(JSlider.VERTICAL, 0, 255, 0);
            lightSliders.setPaintTrack(false);
lightSliders[i].setMajorTickSpacing(16);
lightSliders[i].setMinorTickSpacing(2);
lightSliders[i].setPaintTicks(true);
lightSliders[i].setSnapToTicks(true);
// Loop through the light sliders and add them to the lights panel
SequentialGroup horizontalLightGroup = lightsPanelLayout.createSequentialGroup();
for (int i = 0; i < lightSliders.length; i++) {
horizontalLightGroup.addGroup(lightsPanelLayout.createParallelGroup().addComponent(lightSliders[i]));
SequentialGroup verticalLightGroup = lightsPanelLayout.createSequentialGroup();
ParallelGroup parallelLightsGroup = lightsPanelLayout.createParallelGroup();
verticalLightGroup.addGroup(parallelLightsGroup);
for(int i = 0; i < lightSliders.length; i++) {
parallelLightsGroup.addComponent(lightSliders[i], 256, 256, 256);
lightsPanelLayout.setHorizontalGroup(horizontalLightGroup);
lightsPanelLayout.setVerticalGroup(verticalLightGroup);
// Final window/frame configuration
setTitle(colourcoderTitle);
setResizable(false);
setLocationRelativeTo(null);
GroupLayout frameLayout = new GroupLayout(getContentPane());
getContentPane().setLayout(frameLayout);
frameLayout.setAutoCreateContainerGaps(true);
frameLayout.setHorizontalGroup(
frameLayout.createParallelGroup(Alignment.LEADING)
.addGroup(
frameLayout.createSequentialGroup()
.addComponent(lightsPanel))
frameLayout.setVerticalGroup(
frameLayout.createParallelGroup(Alignment.LEADING)
.addGroup(
frameLayout.createSequentialGroup()
.addComponent(lightsPanel))
pack();
public Colourcoder() {
setDefaultCloseOperation(EXIT_ON_CLOSE);
UIManager.put("swing.boldMetal", Boolean.FALSE);
try {
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
} catch (Exception ex) {
System.exit(1);
initComponents();
* @param args the command line arguments
public static void main(String[] args) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new Colourcoder().setVisible(true);
Edited by: S_Philbin on Sep 29, 2008 11:18 PM

Need help with upper case

I'm stuck on my coding when I have to write a function to
detect upper cases has been used in a sentence
For example if my array element has this:
2345
SAINT PAUL
STREET
APT 5
PHILADELPHIA
I need to be able to write a code to let me know that the 2nd
OR 3rd OR 5th element is written in upper case letter
Or if I set the variable not as array, 2345 SAINT PAUL STREET
APT 5 PHILADELPHIA
I need to be able to detect that at least one of the section
on that street name is written with upper case
Can anyone help please?

compare() cf function performs a case-sensitive comparison of
2 strings
and returns 0 is the strings are the same. so you can compare
an
uppercase version of the string to the original string, and
if the
comparison returns 0 then your string is in uppercase:
<cfif compare(ucase(myarray[2]), myarray[2]) is 0>

<cfelse>

</cfif>
the above code compares the value of the second array element
converted
to uppercase to the original value of the second array
element. if the
result is 0, i.e. the uppercase and original strings are the
same, then
you know the original string is in uppercase.
if you are dealing with a single string (which is equivalent
to a
space-delimited list), then use appropriate list function to
get
required list element, i.e. listfirst(), listlast(),
listgetat()...
<cfif compare(ucase(listlast(mylist, " ")),
listlast(mylist, " ")) is 0>

<cfelse>

</cfif>
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Need help concerning computer case size

Similar Messages

Maybe you are looking for