Need Help configuring updates via mms.cfg

I am running Win 7 x64 and have both the ActiveX and Plugin installed. My Flash Player version is 11.9.900.117 and when I open the Flash Player entry in Control Panel and go to the Advanced tag and click Check Now, the resulting page says the current version is 11.9.900.152.
I followed the the instructions here (http://helpx.adobe.com/flash-player/kb/administration-configure-auto-update-notification.h tml) and in the admin guide (http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html) to configure for updates using the mms.cfg file. My mms.cfg file contains 3 lines (below) and is placed in C:\Windows\SysWOW64\Macromed\Flash.
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
AutoUpdateInterval=0
From all the instructions, the update check should happen at each run of Flash Player per AutoUpdateDisable=0 & AutoUpdateInterval=0 and then should silently install per SilentAutoUpdateEnable=1, but I cannot get my Flash Player to update. I have restarted my computer and IE multiple times; visiting a Flash enabled sites in between to kickstart the process, but no luck.
I am testing this process to deploy to about 2500 machines in my organization. I can't even get to work on my machine though. Any help is appreciated.

We are having the same problem.
We got 250 client, and only some of the clients receive a prompt on login (who shuld not happend, se mms.cfg) with information on downloading 11.9.900.152.
But downloading and install is not posible unless user is a Administrator on the PC.
mms.cfg
AutoUpdateDisable=0
AutoUpdateInterval=0
SilentAutoUpdateEnable=1
Reagards RoarSk

Similar Messages

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

HT4623 I need help ASAP updating my jailbroken iPod touch 4th generation

I have a 4th generation iPod that's jailbroke by Cydia, I need help to update it to IOS 6. From my ipod

You can't, over-the-air update did not become available until iOS 5, you show iOS 4.1.
And we cannot discuss jailbroken devices here per the moderators.

Please i need help i updated my iphone 3gs and now its not activating

i need help i updated my iphone 3gs and now its not activating

What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message?

Need help for Update and cancel SalesOrder

Hi All,
I written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
can give any related links for update and cancel salesorder.
Thanks and Regards,
Srinivas

Hi srinivas.L
It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
Dim oOrder As SAPbobsCOM.Documents
        oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        If oOrder.GetByKey(530) Then
            oOrder.Lines.SetCurrentLine(1)
            oOrder.Lines.WarehouseCode = "01"
            If oOrder.Update() <> 0 Then
                MsgBox(oCompany.GetLastErrorDescription)
            End If
        Else
            MsgBox("Nothing found")
        End If
Hope this helps

HT4623 Need help to Update my Ipad2 please

hello um i have a problem i'd like to update my Ipad2 but i don't have the "Software Update " Botton...what can i do? please help me :/

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Need help configuring Excel Services

I've configured both the Excel Serives and Secure Store Target applications and continually receive the following error message when trying to view the Simple Projects List sample report:
An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
Project Server - Simple Projects List
The Server Logs show the following errors:
Access Denied: Claims stored in the credentials did not match with the group claim for a group app.
The Microsoft Secure Store Services application Secure Store Service failed to retrieve credentials. The error returned was 'Access Denied.' ...
Access is denied. (Fault Detail is equal to Microsoft.Office.SecureStoreService.Server.SecureStoreServiceFault)
SSS has failed with the following exception: Access is denied.
Unable to esablish a connection using credentials retrieved from SSS. This could be because the Unattended Service Account is not configured or because the credentials retrieved from SSS are not valid.
I've repeated the steps to create these configurations a few times, and continue to get the same errors. Any help would be appreciated!
Thanks

Hello,
I need help setting up excel services.
Excel service is already running on sharepoint server.
I have one reporting file which is generated by DBA with database connection. i want to upload that file under document library and i want whenever user open it through document library, it gets updated through database connection
This is my first time, so pls guide me
Reporting file has authentication set to --> None
Do i require any specific settings for authentication? like unattended account ? which username should i use
Connection String -->
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=True;User ID=ExcelServices;Initial Catalog=SurveyData;Data Source=jdb1;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RSTKW7W-06709;Use Encryption for Data=False;Tag
with column collation when possible=False
http://../training/sptestsite/Medication_Audit_Report
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
Trusted File Location - is this place do i need to upload that reporting file?
Trusted Data Connection Libraries - is this place do i need to save connection file .odc ?
If i am not wrong, should i put
Trusted File Location = http://../training/sptestsite/Medication_Audit_Report
Trusted Data Connection Libraries = http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
http://../training/sptestsite/Medication_Audit_Report -- Here only reporting file will be uploaded right?
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/ -- Here only database connection .odc file will be uploaded?
what other settings are required. please correct me
my email address - [email protected]
Harsh

I need help configuring three products: WRVS4400N, WAG325N and WVC200

Hello,
I want your help in three linksys products as mentioned below:
WAG325N ADSL2+ Router
WVC200 PTZ CAMERA
WRVS4400N VPN Router
The computer connections and configuration of above linksys products which I am working with and which are connected with the above three linksys products at present are as follows:
1) I have one server and one laptop.
2) Laptop has two wireless adapters which I use to connect to the routers.
3) The server is connected to the WRVS4400N Router through one of the four ethernet ports mentioned on backside of the WRVS4400N Router. The DHCP of this router is disabled by me and the router's default IP 192.168.1.1 was changed to 192.168.1.12
4) The WRVS4400N router is connected to the Wag325N router for internet access to the server and server is connected to WRVS4400N Router as mentioned in point number 3 above.
5) The WAG325N router is setup as per the instructions mentioned that came with the CD of this router. The only change that I have modified is the router's default IP. I have changed the default IP of WAG325N from 192.168.1.1 to 192.168.1.13 and DHCP is enabled on this router.
The help that I want is step by step as follows:
1) I want to configure the both routers in such a way so that I can access them from anywhere across the world i.e. remotely using internet.
2) I have WVC200 Camera which I setup according to instructions mentioned in the CD and also configured the DDNS service. But when the " RJ45 Cable is connected " to my WAG325N router and Camera, then only the camera works properly. What I want is that after the setup is completed, I want to remove the RJ45 Cable connected from my camera to router and use the camera wirelessly from any location within the range of my above mentioned WAG325N router. I need flexibility to use my camera without cable connections from any location and any rooms of my house. I also configured the port forwarding and DDNS properly. The only problem is that if I remove the Cable after the setup of camera is finished, then the camera access is not working on LAN or internet(through DDNS). Whereas the same works on LAN and internet using the DDNS service, when the cable is physically connected to the WAG325N router. Also I want one more thing additionally other then this. I want to use this camera wirelessly by configuring the port forwarding options on both routers at a same time(i.e. simultaneously at once on WRVS4400N and WAG325N).
3) Now as two DHCP cannot work at a same time and as my routers are connected with each other, So I have disabled the DHCP on WRVS4400N. Here I need help so that DHCP can be enabled on both at a same time. Because if the DHCP is not enabled on WRVS4400N then I have to give IP to the server which is connected with server. If I enable the DHCP then there are two DHCP's at a same time on same network and thus problems occurs in internet access to the server. So, what should I do in such a way so that I do not have to give any IP to my server and set it to automatic.
4) This question is just for my knowledge so that I can use the above mentioned linksys purchases upto full extent possible in future. I want to know what is VPN and how is it usefull? What is the difference between VPN and VPN tunnel? How can VPN be used to access all my network resources connected with my server in the above situation where my server is connected to WRVS4400N which in turn is connected to WAG325N?
Thanks !
Sincerely
Kalpesh Sharma
+91-79-25351208
+919227435453
Ahmedabad, India.

for question number 1:
you said that your main router is WAG325N, for you to remotely access the 2nd router is for you to forward the IP addr [192.168.1.12] on your first router and change its management port of your second router that is located on either the security tab or the administration tab on its User Interface
to access your first router open and Internet Explorer and enter
http://[public IP addr]:[management port]
the PUBLIC IP or INTERNET IP is located on the status page of your router
to access your second router just change the management port to
ex.
http://66.77.88.99:8080 first router
http://66.77.88.99:8081 second router
for question number 2:
make sure that you have configured all wireless settings on both your camera and your main router WAG235N, once done save settings and power down your camera and power it back up.
for question number 3:
for you to enable DHCP on both routers your connection can go like so...
from a regular port of your main router going to the INTERNET port of your second router [this way you can enable DHCP on both routers]. INTERNET is no problem, your cesond router will be able to get connection
for question number 4:
VPN - Virtual Private Network
VPN tunnel -is/are connections from router to router [gateway to gateway]
VPN is used to connect a diff network on a diff location for you to have access to the shared filed [it is like a file sharing through the internet]
for you to be able to use VPN tunnel you have to connect to a different VPN router on a diff location. In that way you can get access to the other network

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

Need help configuring VPN on RV120W Router (WiTopia VPN)

Hello Cisco Community,
I need some help configuring a VPN from WiTopia on my RV120W router. I am trying to make it so that if any device connects to the router it can automatically connect to the VPN from WiTopia.
Please note that the VPN plan includes PPTP, L2TP, & IPSEC VPN types.
Is this possible? And if so, how?
Thanks in advance!

Hello,
If WiTopia is providing only client to gateway VPN, where WiTopia is the gateway allowing connections to clients, than you will not be able to configure RV120 to connect to it. RV120 in its VPN configurations cannot be configured to be a client.
The only tunnel where can play the role of the connecting part is IPSec gateway to gateway, when in the IKE policy the Direction type is Initiator and the Exchange mode is Aggressive. And you will need to receive all additional configuration parameters from WiTopia -the Encryption, Authentication Algorithm, PFS, SA lifetime and so on. But this means that WiTopia have to provide gateway to gateway VPN connection.
Regards,
Kremena

I need help configuring a connection with asdm 5.2 for asa

Hi All
I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
When he tries to connect he gets the error
Cant connect to MySql Server at "IP Address" (10060)
He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
Any help would be greatly appreciated

Hi,
I'm not a security specialist but here is how I had it set up at home:
Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
Hope this points you in the right direction.

I need help with updating my Ipod 5

So i am updating my ipid 5 to IOS 7.0.3. I am doing it through Itunes on my computor. I have sucsessfully updated the ipod, and am now in the process of setting up the ipod after the update. I am connected to wif-fi, but for the past 20 hours all the ipod has said was "restoring ICloud settings". I need help! i dont know what to do
Thanks!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The try again.

Need help regarding updated rows

Dear sir,
need help on this query
how many rows got updated when i execute an update statement

If you are executing update statement from sqlplus session.
Make sure "feedback" is turned on. It'll show numbers of rows updated just after the command;
SQL> update tt1 set col1 = 1;
0 rows updated.
SQL> show feedback
FEEDBACK ON for 1 or more rows
SQL> set feedback off
SQL> update tt1 set col1 = 1;
SQL>Details about this sqlplus system setting:
FEED[BACK] {6|n|OFF|ON}
Display the number of records returned (when rows >= n )
OFF (or n=0) will turn the display off
ON will set n=1
Regards,
Ullhas

HT1338 i need help o update my ipod touch 5th gen

how do i update my 5th gen ipod ?

If you have iOS 6.1.5 you have a 4G iPod. iOS 7 is only compatible with the 5G iPod.
To update:
iOS: How to update your iPhone, iPad, or iPod touch
If you update via iTunes yo need iTunes 11.1 or later and that requires OSX 10.6.8 or later which requires a Mac with an Intel processor

Need help in UPDATE data in SQL Query

Hi all,
I am trying to update data in the sql table as per below screenshot but couldn't able to do it. Can anyone help to update the data as I mention in screenshot.Appreciate you help.Thanks.
Yellow highlighted columns are source
Green highlighted columns are target
Colored data should be update as per source data in sql table.Data is not static as it might have more rows to update and query should be bit dynamic.
Maruthi...

You have already asked this question once. You did not get any good answers, because you the information you gave was insufficient. And I'm afraid that the information is still in sufficient.
Or more exactly, from the example you have given, the answer is: can't be done. And the reason it can't be done, is as I explained in response to you first thread: there is no information in the data to from which we can deduce that Clorox Company
should be under "Week 1-1,K.B,F". The fact that rows are listed in a certain order in the screenshoot is of no importance, because a table is an unordered object.
But you said in another post that you have a timestamp column. Maybe that column is usable - maybe it is not. But at least it is a key that you have more columns that the ones you show.
The best way to get help with this type of problems is to post:
1) CREATE TABLE statement for your table(s).
2) INSERT statements with sample data.
3) The desired result given the sample.
4) A short description of the actual buisness problem you are trying to solve.
5) Which version of SQL Server you are using.
This makes it easy to copy and paste into a query window to develop a tested solution. Screenshots with an insufficient amount of data is not going to help you very much.
Erland Sommarskog, SQL Server MVP, [email protected]

Need Help configuring updates via mms.cfg

Similar Messages

Maybe you are looking for