Need help connecting my I phone to Verizon MIFI4150

Can someone explain why I cannot get my Iphone to connect to my verizon MIFI?

jdansmithjr wrote:
Can someone explain why I cannot get my Iphone to connect to my verizon MIFI?
Without more details, probably not. What is happening when you try? Are you getting any error messages? Have you tried pulling the battery on the MiFi? Have you tried resetting the iPhone?

Similar Messages

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

    I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

    Not when you insist on being so impatient.
    These are user to user support forums.  No one here is paid to read or respond to messages.
    Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

  • Need HELP Connecting new Laptop to a wired modem

    Purchased a new HP Pavillion laptop with both ethernet and wireless capabilities-Win 7. Currently have only an old Westell E90-610015-06 modem.  Has one wired port to attach a pc.  Was/am using an old IBM wired Thinkpads using XP. Work fine, but slow.
      Decided to come into the modern world.  New laptop connects to the wired lan, can ping the ethernet card, the modem and yahoo.com. When entering most web addresses. get no display of the web page back to the display.  Took PC to another Verizon acct and get same failure on a different Westell model of modem/router.   
    Laptop works fine at Staples and a friends house using cable network PTD. Can access all web sites. 
    Have spent at least 25 hrs online with various Verizon of India support levels, trying all settings and tests on the HP and Westell.
    They blame the Laptop, which I have reloaded twice to factory settings.  They Refuse to send a current modem to eliminate that possibility.    Spoke with yet another new PC purchaser, he spent 2.5 hrs on the phone getting his to work. So not unique problems???
    Any help or direction I can use on my next 'trip' to India would be greatly appreciated!      
    Solved!
    Go to Solution.

    09-01-2011 09:56 PM
    New Westell 6100 arrived next day as promised.  Modern revision!
    As a precaution,  since we had played with and checked every setting we could think of,  I decided to reload the laptop back to factory settings, and set back up again to ensure we were back to stock settings where it had worked at other sites.
    After the reload,  I checked to see if the laptop acted the same before swapping out the modem,(for the 4th time)  and it did!  Didn't Work. Got the LAN connected msg, but would not pass internet data in both directions.
    I made sure I followed the new modem setup instructions word for word. 
    Disconnecting old modem and installed the new one.  Except,  I DID NOT use the new ethernet cable from the modem to the laptop nor did I replace the phone line (rj11 ends) from the phone jack.  Since I was sure both were good as they worked on the OLD IBM laptop.
    Modem powered up and after a bit, got the correct indicator lites per instructions.  At the point the instructions said open the browser and the Verizon Activation screen would come up,  it didn't, instead got a 404 error!  After closing and opening IE a few times with the same 404 error,  I decided to try entering Verizon.com and low and behold, the activation screen came up and was sucessfully completed.  
    After completion, It still didn't work.  I clicked around the network settings here and there for a bit, did a POR to the laptop, .......them NOTICED the Internet lite had turned red on the modem.   When it didn't go green after a bit....I powered off the modem,  waited about 30 seconds, powered back up and MY GOD....IT WORKS!   
    Loaded Google Chrome so I have another browser to compare with if future problems,  and will probably add FireFox to the mix.  Went out to EBAY, AOL, GOOGLE NEWs sites,  got info back sucessfully......   Connected the printer and Win7 went out and brought back the drivers.  Left the in-laws to familiarize themselves with Win 7 and ensure any other sites the use work.
    Will head back later to install Office and Virus protection and and MSN updates
    If it wasn't the modem, getting a new one forced a reactivation thru Verizon setup and settings being reset, that allowed the new HP Laptop to be recognized and work???.
    Special thanks to Smith6612 for working me through various attempts to repair and helping me keep my sanity.
    Verizon phone helpdesk needs figure out a way so that each time you call on the same problem, you are not starting back at square 1 with level 1 support.  After a given time or # of calls, there should be auto escalation to the next level of support.  After all, this process stared Aug 4th.   If I hadn't been able to see this laptop work at 2 other non Verizon locations, Level 1 would have had me returning this laptop to the MFG 4 times!!!!!
    Thanks again.

  • Need help connecting to the internet via Dial-up?

    Hi! My son and his mini have moved back to Vermont, and where he is only dial-up is available. I thought the hookup would be simple......I haven't a clue. I have been on high spped cable for so long that I need help!!!!! Here is what I tried. Phone cable to the modem. (Can't connect it directly to the mini because it only takes an ethernet cable) USB cable from the modem to the mini. Using the Verizon software we got nowhere because we could not get a connection...Need help, Thanks Bill

    The first bit of info is which Verizon number to use to dial-up, so that it is a local call. Is your son going to call from Essex Jct or somewhere else? Basically we need his area code and first three digits of phone number, if you are comfortable giving that. Otherwise you'll have to call Verizon and ask them for the local number to call.
    Then we have to look up how Verizon wants login info. Perhaps another customer can help here. The conventions vary from one ISP to another. Please don't give us you login here!
    That should be enough to get you connected and surfing. Then we have to configure the mail program. But again a little research or help from another Verizon customer will do the trick.
    Please don't install their software. I've spent countless hours removing ISPs' extra software from friends computers. Such software does not necessarily make things faster and it leaves you with a non-standard system. It's also about getting their hooks into you to push more advertising at you and more revenue their way. (This helps explain why they are so eager for you to use their software BTW.)
    There are techniques to speed up dial-up, but they don't involve extra ISP software and ads. They have to do with keeping the ads away in the first place.

  • Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

    Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
    Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

    Anybody wants to help me ?I wait your answer for my question...!
    Thanks

  • Need help connecting external monitor

    My brother needs help with connecting an external monitor to his 20" iMac G5. He has the adapter with the standard monitor port, and when plugged in, the monitor duplicates the iMac screen. His question is, how can he set it so that the desktop is extended, instead of duplicated? I, myself, have a MacBook and two months ago I used my adapter to connect a projector, and I remember an option where I could choose between duplicate and extended desktop, and right now I tried to find it on my MacBook and well as my Intel iMac and I can't find the option, and neither can he.
    Please help, thanks!

    The iMac G5 can only mirror the internal display unless you hack the firmware. 
    Display options like that only appear when you connect a display which is why you can't see them on the MB at the moment.
    mrtotes

  • Need help connecting to wifi and bluetooth

    Can't connect to wifi or bluetooth.  Keep getting told incorrect password.  I'm keying in the correct password.  Any suggestions on how to fix?  Need help!!

    You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

  • Need help connecting to 360 and pc with internet

    im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
    thanks in advance

    Hi....
             A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
                There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

  • Need help connecting to Oracle to create database

    Am student taking DBA course; have altered pfile so that path shows where createdb is located. Cannot connect to Oracle; keep getting message "insufficient privileges." Createdb file amended per book to "REMOTE_LOGIN_PASWORDFILE=exclusive" and still can't connect. Can I grant connect privileges to internal/oracle? Tried several times to create database and am now using new database name to try again, but when I get to svrmgrl and type in "connect internal" and give password "oracle" as book says to do I get the "insufficient privileges" message again. Need help.

    Linda,
    when you use exclusive in remote_login_passwordfile is necessary make one file. Use the following instructions:
    orapw file=orapw<SID> password=<password> entries=<users>
    where
    file=name of password file (mandatory)
    password=password for SYS and INTERNAL (mandatory)
    entries=maximum number of distinct DBA and OPERs (opt)
    There are no spaces around the equal to (=) character.
    Find orapwd.exe by Windows Explorer
    Bye,
    DQC

Maybe you are looking for

  • Using two different GPUs in a Mac Pro (4,1)

    Hi, so I've been Google'ing, and I've thus far been unable to find any hint whatsoever to my (somewhat difficult-to-understand) question. So here it is: I'm planning to purchase a Radeon 5870 to upgrade from my dated nVidia GT 120 GPU. However, there

  • PSE 8 - win. 7 prof 64 bit - high res. - book?

    A couple of questions here... Just ordered Photshop Elements 8 after purchasing new computer with Windows 7 Professional 64-bit.  From what I read on MS, it will be compatible???? Will PSE 8 be able to utilize all of the features of a) Windows 7 Prof

  • Unable to conv Number to DEC format :Error while Uploading data

    Can anyone help with the above error rectification plz.

  • I can't access my own Time Machine backups in ML

    A couple days ago I did an "erase and install" ML in my MacBook Pro. I had tested Time Machine backups and a bootable clone of my Lion system, so I was truly confident I had everything safe. But no. When registering my Mac as "new", I chose a subtle

  • Rich Client and firewalls??

    The documentation says that a range of ports will have to be opened in the firewall to allow RMI/IIOP traffic in. My question is is how do you determine that range and is it configurable? We're running iPlanet 6.0 sp2 on Solaris. thx A.