Need help connecting new HDTV to an old 5.1 speaker system

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

Similar Messages

  • Need HELP Connecting new Laptop to a wired modem

    Purchased a new HP Pavillion laptop with both ethernet and wireless capabilities-Win 7. Currently have only an old Westell E90-610015-06 modem.  Has one wired port to attach a pc.  Was/am using an old IBM wired Thinkpads using XP. Work fine, but slow.
      Decided to come into the modern world.  New laptop connects to the wired lan, can ping the ethernet card, the modem and yahoo.com. When entering most web addresses. get no display of the web page back to the display.  Took PC to another Verizon acct and get same failure on a different Westell model of modem/router.   
    Laptop works fine at Staples and a friends house using cable network PTD. Can access all web sites. 
    Have spent at least 25 hrs online with various Verizon of India support levels, trying all settings and tests on the HP and Westell.
    They blame the Laptop, which I have reloaded twice to factory settings.  They Refuse to send a current modem to eliminate that possibility.    Spoke with yet another new PC purchaser, he spent 2.5 hrs on the phone getting his to work. So not unique problems???
    Any help or direction I can use on my next 'trip' to India would be greatly appreciated!      
    Solved!
    Go to Solution.

    09-01-2011 09:56 PM
    New Westell 6100 arrived next day as promised.  Modern revision!
    As a precaution,  since we had played with and checked every setting we could think of,  I decided to reload the laptop back to factory settings, and set back up again to ensure we were back to stock settings where it had worked at other sites.
    After the reload,  I checked to see if the laptop acted the same before swapping out the modem,(for the 4th time)  and it did!  Didn't Work. Got the LAN connected msg, but would not pass internet data in both directions.
    I made sure I followed the new modem setup instructions word for word. 
    Disconnecting old modem and installed the new one.  Except,  I DID NOT use the new ethernet cable from the modem to the laptop nor did I replace the phone line (rj11 ends) from the phone jack.  Since I was sure both were good as they worked on the OLD IBM laptop.
    Modem powered up and after a bit, got the correct indicator lites per instructions.  At the point the instructions said open the browser and the Verizon Activation screen would come up,  it didn't, instead got a 404 error!  After closing and opening IE a few times with the same 404 error,  I decided to try entering Verizon.com and low and behold, the activation screen came up and was sucessfully completed.  
    After completion, It still didn't work.  I clicked around the network settings here and there for a bit, did a POR to the laptop, .......them NOTICED the Internet lite had turned red on the modem.   When it didn't go green after a bit....I powered off the modem,  waited about 30 seconds, powered back up and MY GOD....IT WORKS!   
    Loaded Google Chrome so I have another browser to compare with if future problems,  and will probably add FireFox to the mix.  Went out to EBAY, AOL, GOOGLE NEWs sites,  got info back sucessfully......   Connected the printer and Win7 went out and brought back the drivers.  Left the in-laws to familiarize themselves with Win 7 and ensure any other sites the use work.
    Will head back later to install Office and Virus protection and and MSN updates
    If it wasn't the modem, getting a new one forced a reactivation thru Verizon setup and settings being reset, that allowed the new HP Laptop to be recognized and work???.
    Special thanks to Smith6612 for working me through various attempts to repair and helping me keep my sanity.
    Verizon phone helpdesk needs figure out a way so that each time you call on the same problem, you are not starting back at square 1 with level 1 support.  After a given time or # of calls, there should be auto escalation to the next level of support.  After all, this process stared Aug 4th.   If I hadn't been able to see this laptop work at 2 other non Verizon locations, Level 1 would have had me returning this laptop to the MFG 4 times!!!!!
    Thanks again.

  • Need Help Connecting New MacBook Pro with Wireless Network Password

    Hi Linksys Community,
    I would like to ask for your help and advice.
    I recently purchased a new MacBook Pro, OS X, Version 10.8.3.
    I need to setup a password to the wireless internet network (I've successfully done this)
    I have a Wireless G,  WRT54G Router. 
    When I setup the password, I'm not able to connect to the internet with my new MacBook Pro, which is running Mac OS X Version 10.8.3.  I get the message 'cannot connect to Internet, connection timeout) However, I'm able to connect to the internet with an older MacBook Pro, and my iPad. The password works fine with other models.
    Would anyone be able to help me troubleshoot what is going on, or how I can solve this problem?
    I would like to be able to have a password on my network, and use the internet with my new MacBook Pro.
    I have read about manually adding in the MAC address of computers, and setting up a Wireless MAC fiter.
    Does anyone think this would solve the problem?  if so, how can I find out the MAC address of my MacBook Pro?
    Thanks in advance for you help and time!

    Hi,
    Thanks for your response.
    Yes, my computer connects when your network is open (no password set)?
    I used WPA Pre-Shared Key.
    Do you know how I could check if my new MacBook Pro is compatible with this?
    Thanks!

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • I need help getting new authorization codes for digital copies

    I need help getting new authorization codes for digital copies of movies. Can someone help me out?

    There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • Need help opening new software application Adobe Elements 12 on my new MAC. HELP?

    Need help opening new software application Adobe Elements 12 on my new MAC. HELP?

    Is it installed? If so, go to Applications and choose either Adobe Elements 12 Organizer, or Adobe Photoshop Elements 12>Support Files>Photoshop Elements Editor.

  • Need help getting new printer hp deskjet 3520 setup for eprint and wireless

    need help getting new printer hp deskjet 23520 stup for eprint and wireless

    Hi Pastorlee7,
    I see that you're having problems setting up your printer.  I would take a look at the document below.
    Hp deskjet 3520
    Let me know how it goes.  

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • I need help fixing itunes crashes on my old mac

    i need help fixing itunes crashes on my old mac

    Thanks for your reply,
    I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
    I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
    I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
    Thanks.

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • HT2155 I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

    I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

    Just setup the iPod with your Hotmail account email address/Apple ID
    The add the Hotmail email account to Settings>Mail

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • TS3037 I need help pairing my iPad Air to my Bose wireless speaker via bluetooth

    I need help pairing my iPad Air to my Bose wireless speaker via Bluetooth

    I think this document will solve your problem.
    Pairing and connecting to a Mac® computer

Maybe you are looking for

  • Invalid xml decl while creating template for a report created in BIP

    Hi I am in the process developing a report - extracting data from an xmltype column. I defined my query - as simple as (for now): select xmlcol.getclobval() from table1 The way information is stored in each xmltype column is with the xml declaration

  • How do I get my computer to start on the home page in safari

    My computer used to start up and open mail, and my home page in Safari, msnbc.  Now on startup the safari page opens to the last page I was on.  How do I change this?  It seems to have started with Lion because my MacBook does the same thing

  • How i can start session to synchronize my ipod touch 5g in Itunes?

    I can't synchronize my ipod touch 5g because when it start synchronizing Itunes tell me that I have to start session of synchronization.

  • How do you get to the box/area that shows open apps

    There was a little strip that popped up on my screen that showed the applications that I had open.  I don't know what I pushed to get there and it left before I could figure out what it was.  I don't know how else to describe it other than a long nar

  • System preferences icon bug?

    Hey, Look at this: http://tagus.ist.utl.pt/~pedro.nogueira/hum.jpg You'll surely notice two icons that are wrong! Those on/off switches in place of the Software Update and Startup Disk icons... I made a clean install a few days ago... and I dont thin