Need help connecting to 360 and pc with internet

im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
thanks in advance

Hi....
A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

Similar Messages

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Need help connecting to wifi and bluetooth

Can't connect to wifi or bluetooth. Keep getting told incorrect password. I'm keying in the correct password. Any suggestions on how to fix? Need help!!

You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

Need help for drill up and down with sum urgently !!

Hi everyone,
I'm now using Discover plus but I've got problem with using drill up and down.
exp)
now
shop
L supplyname
L $600
Jancode1 ---sum $300
L aaaaa-------$100
bbbbb-------$200
Jancode2---sum $300
aaaaa-------$100
bbbbb-------$200
want to do
shop
L supplyname
L $300
Jancode1 ---sum $300
L aaaaa-------$100
bbbbb-------$200
Jancode2---sum $300
Laaaaa-------$100
bbbbb-------$200
as showing exsmple,
the sameitem(Jancode) value are same area and sum is separetated as correctly then do drill up, but the reslut of sum is 600 which I don't want the double result like example. I want to make correct result(sum) such as 300 which means not summing double item value as 1item value.
does anybody know what I should do with it or has any idea for it??
I really need it know ASAP if it possible to do it or not and also if I can do,
please tell the how to do it.
Thank you for reading.

Usually you can tailor your antennas to the coverage pattern you need. AP placement, antennas, and power level are best determined pre-install by a good, comprehensive site survey.
It may be possible to change your antennas to higher gain types (i.e., 180 degree patch or sector antennas instead of Omnidirectional rubber ducks).
Be advised though that changing to higher gain antennas will also change their coverage pattern; you might reach farther in one direction but less in another. Each antenna should have a chart that describes the side profile and overhead profile of the radiation pattern.
Running in mixed mode (b & g) will reduce your throughput, but it shouldn't affect your range. The brief version is that it takes time to switch modes, and the AP has to notify clients on one protocol that there's activity happening on the other protocol ... it all takes time & bandwidth.
Both are the same frequencies and have the same basic coverage.
CCX (Cisco Client Extensions) should not affect your client's range or throughput; they are extensions - if you don't use them, they are pretty much ignored.
Each vendor has there own "formula" for when to roam to the next AP. Some vendors use Inter Access Point Protocol (IAPP) to communicate between the old AP and the new AP so the handoff happens in a coordinated fashion. Using a single vendor for all of your APs (at least in the same / adjacent neighborhood) increases your chances of a smooth handoff.
Good Luck
Scott

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton

HT4199 I need help connecting to my WIFI. I purchased a new router and am having trouble connecting.

I need help connecting to my WiFi. I purchased a new router and am having trouble connecting.

your gonna want to contact your internet service provider for the best info on setting that router up. but for connecting to wifi on the iphone, ipad, and ipod
go to
settings > wifi
then choose your connection and enter the password

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

I need tow connect a Presonus firestudio mobile with my Mac Book Pro???

I need tow connect a Presonus firestudio mobile with my Mac Book Pro??? I don't know which cable to buy?
I bought http://www.monoprice.com/Product?ab3=b&utm_expid=58369800-11.KFcpHWqASSutMqNPOqa JVg.1&c_id=103&cp_id=10301&cs_id=1030105&p_id=3542&seq=1&format=2&utm_referrer=h ttp%3A%2F%2Fwww.monoprice.com%2FProduct%3Fab3%3Db%26c_id%3D103%26cp_id%3D10301%2 6cs_id%3D1030105%26p_id%3D3542%26seq%3D1%26format%3D2
but I cannot connect on the macbook pro??? please help, regrds, Real

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

Need help connecting to 360 and pc with internet

Similar Messages

Maybe you are looking for