Need help connecting to laptop

I have hooked my HTC incredible phone to my laptop using a usb cord to try and connect to the internet but can't figure out how to do it once its hooked up. I clicked on the box to make sure its using the broadband but after that I'm lost. Some help with this would be awesome.

Are you paying for a tethering data plan?

Similar Messages

Need HELP Connecting new Laptop to a wired modem

Purchased a new HP Pavillion laptop with both ethernet and wireless capabilities-Win 7. Currently have only an old Westell E90-610015-06 modem. Has one wired port to attach a pc. Was/am using an old IBM wired Thinkpads using XP. Work fine, but slow.
Decided to come into the modern world. New laptop connects to the wired lan, can ping the ethernet card, the modem and yahoo.com. When entering most web addresses. get no display of the web page back to the display. Took PC to another Verizon acct and get same failure on a different Westell model of modem/router.
Laptop works fine at Staples and a friends house using cable network PTD. Can access all web sites.
Have spent at least 25 hrs online with various Verizon of India support levels, trying all settings and tests on the HP and Westell.
They blame the Laptop, which I have reloaded twice to factory settings. They Refuse to send a current modem to eliminate that possibility.    Spoke with yet another new PC purchaser, he spent 2.5 hrs on the phone getting his to work. So not unique problems???
Any help or direction I can use on my next 'trip' to India would be greatly appreciated!
Solved!
Go to Solution.

09-01-2011 09:56 PM
New Westell 6100 arrived next day as promised. Modern revision!
As a precaution, since we had played with and checked every setting we could think of, I decided to reload the laptop back to factory settings, and set back up again to ensure we were back to stock settings where it had worked at other sites.
After the reload, I checked to see if the laptop acted the same before swapping out the modem,(for the 4th time) and it did! Didn't Work. Got the LAN connected msg, but would not pass internet data in both directions.
I made sure I followed the new modem setup instructions word for word.
Disconnecting old modem and installed the new one. Except, I DID NOT use the new ethernet cable from the modem to the laptop nor did I replace the phone line (rj11 ends) from the phone jack. Since I was sure both were good as they worked on the OLD IBM laptop.
Modem powered up and after a bit, got the correct indicator lites per instructions. At the point the instructions said open the browser and the Verizon Activation screen would come up, it didn't, instead got a 404 error! After closing and opening IE a few times with the same 404 error, I decided to try entering Verizon.com and low and behold, the activation screen came up and was sucessfully completed.
After completion, It still didn't work. I clicked around the network settings here and there for a bit, did a POR to the laptop, .......them NOTICED the Internet lite had turned red on the modem. When it didn't go green after a bit....I powered off the modem, waited about 30 seconds, powered back up and MY GOD....IT WORKS!
Loaded Google Chrome so I have another browser to compare with if future problems, and will probably add FireFox to the mix. Went out to EBAY, AOL, GOOGLE NEWs sites, got info back sucessfully...... Connected the printer and Win7 went out and brought back the drivers. Left the in-laws to familiarize themselves with Win 7 and ensure any other sites the use work.
Will head back later to install Office and Virus protection and and MSN updates
If it wasn't the modem, getting a new one forced a reactivation thru Verizon setup and settings being reset, that allowed the new HP Laptop to be recognized and work???.
Special thanks to Smith6612 for working me through various attempts to repair and helping me keep my sanity.
Verizon phone helpdesk needs figure out a way so that each time you call on the same problem, you are not starting back at square 1 with level 1 support. After a given time or # of calls, there should be auto escalation to the next level of support. After all, this process stared Aug 4th. If I hadn't been able to see this laptop work at 2 other non Verizon locations, Level 1 would have had me returning this laptop to the MFG 4 times!!!!!
Thanks again.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

HT4199 I need help connecting to my WIFI. I purchased a new router and am having trouble connecting.

I need help connecting to my WiFi. I purchased a new router and am having trouble connecting.

your gonna want to contact your internet service provider for the best info on setting that router up. but for connecting to wifi on the iphone, ipad, and ipod
go to
settings > wifi
then choose your connection and enter the password

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

Need help connecting laptop via ethernet connectio...

can anyone help me connect my laptop to the bt homehub via ethernet. i have my xbox 360 in port 1 and that works flawlessly i am trying to connect my laptop to the second port but i cant connect. dont think i am using correct settings. if someone could walk me through it i would appreciate it..... thanks daniel

It is probably just that your laptop has been used with a router before and it may be set up to use a fixed IP address - one which is outside the ranfge of your current router. Follow Jarviser's excellent instructions here and you should be up and running.
"To forbid us anything is to make us have a mind for it."
-- Michel de Montaigne, Essays, 1559

Need help adding 2nd laptop to router WRT160N

I need to add another laptop to our home network so it can connect to our internet connection. The 2nd laptop shows our home network as an available network connection, however, when I try to connect and enter in the key, the computer gives me a message "please wait while windows connects to the xxxxxx network- waiting for the network" This message stays for approximately 45 seconds then disappears, leaving me at the wireless network connection screen. I have confirmed the network key is correct.
I can connect to the internet if I choose an unsecure connection so I am wondering what other items I need to configure.
Any help would be greatly appreciated.
Thanks!

Yes, those sound like they should be compatible security modes.
What I'd suggest is to reboot your second laptop and power-cycle the router, see if that helps you to be able to connect both laptops.
If that doesn't help, then write down any configuration data that you'll need to re-enter after resetting the router. There's a recessed reset switch on the back of your router, hold that in for about 30 seconds and release it. This will set the router back to factory defaults, so you'll need to re-enter your configuration data using the router web GUI. Then try again to reconnect with both laptops, and see what happens. Please post the results from trying these.

Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Need help connecting to the internet via Dial-up?

Hi! My son and his mini have moved back to Vermont, and where he is only dial-up is available. I thought the hookup would be simple......I haven't a clue. I have been on high spped cable for so long that I need help!!!!! Here is what I tried. Phone cable to the modem. (Can't connect it directly to the mini because it only takes an ethernet cable) USB cable from the modem to the mini. Using the Verizon software we got nowhere because we could not get a connection...Need help, Thanks Bill

The first bit of info is which Verizon number to use to dial-up, so that it is a local call. Is your son going to call from Essex Jct or somewhere else? Basically we need his area code and first three digits of phone number, if you are comfortable giving that. Otherwise you'll have to call Verizon and ask them for the local number to call.
Then we have to look up how Verizon wants login info. Perhaps another customer can help here. The conventions vary from one ISP to another. Please don't give us you login here!
That should be enough to get you connected and surfing. Then we have to configure the mail program. But again a little research or help from another Verizon customer will do the trick.
Please don't install their software. I've spent countless hours removing ISPs' extra software from friends computers. Such software does not necessarily make things faster and it leaves you with a non-standard system. It's also about getting their hooks into you to push more advertising at you and more revenue their way. (This helps explain why they are so eager for you to use their software BTW.)
There are techniques to speed up dial-up, but they don't involve extra ISP software and ads. They have to do with keeping the ads away in the first place.

Need help connecting external monitor

My brother needs help with connecting an external monitor to his 20" iMac G5. He has the adapter with the standard monitor port, and when plugged in, the monitor duplicates the iMac screen. His question is, how can he set it so that the desktop is extended, instead of duplicated? I, myself, have a MacBook and two months ago I used my adapter to connect a projector, and I remember an option where I could choose between duplicate and extended desktop, and right now I tried to find it on my MacBook and well as my Intel iMac and I can't find the option, and neither can he.
Please help, thanks!

The iMac G5 can only mirror the internal display unless you hack the firmware.
Display options like that only appear when you connect a display which is why you can't see them on the MB at the moment.
mrtotes

Need help connecting to wifi and bluetooth

Can't connect to wifi or bluetooth. Keep getting told incorrect password. I'm keying in the correct password. Any suggestions on how to fix? Need help!!

You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

Need help connecting to 360 and pc with internet

im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
thanks in advance

Hi....
A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

Need help connecting to laptop

Similar Messages

Maybe you are looking for