NEED HELP Connecting To Mac At Office Using ARD 3

I have a MacBook Pro that I would like to leave at my office without having to bring it home every night. I installed ARD 3 on my admin computer (my mac mini) at home. I have also installed the client software on my laptop at work. I have all of the correct IP addresses, DNS names, port numbers and all that but I can't figure out how to connect to my mac at work. When I went to enter the IP address of my mac at work under the add by address menu, after I entered my user name and password, it said connection failed. What do I need to do? What information do I need to enter into the right places?
Thanks!

You may need to open TCP and UDP port 3283 and TCP and UDP port 5900 in the routers on your end and your company's end. For encrypted file transfer (ARD 3.0), also open TCP port 22. You may also need to open TCP (and perhaps UDP) 5988 and 5989, though it's not clear under what circumstances this will be necessary.
If your systems at work get their IP addresses via NAT, you'll also have to forward those ports to your MBP's internal IP address.

Similar Messages

Need help connecting to an aws instance using a key from my macbook

i need to connect to an amazon instance using terminal and a keypair from a macbook pro. please help since its possible to connect to the aws instance easily using putty on windows 7 OS but failing to connect on my new macbook pro. step by step really appreciated.

You may need to open TCP and UDP port 3283 and TCP and UDP port 5900 in the routers on your end and your company's end. For encrypted file transfer (ARD 3.0), also open TCP port 22. You may also need to open TCP (and perhaps UDP) 5988 and 5989, though it's not clear under what circumstances this will be necessary.
If your systems at work get their IP addresses via NAT, you'll also have to forward those ports to your MBP's internal IP address.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

VGA is an analog signal HDMI is digital. A simple cable would not work you would need something that converts the analog signal to digital.
A search of VGA to HDMI turned up a few possibilities but nothing specific. In any case the picture on the TV will not be very good given the source.
You should check to see if the TV has a VGA input. Some TV's have a computer connection port and this is usually VGA.
Message was edited by: Frank Caggiano - I'll ask the hosts to move this to the proper community.

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

I totally understand.
Check some things from here, I have 2 and they have been great so far.
Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
Clean off your on the G5 drive and off you go.
I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
http://eshop.macsales.com/search/elite+pro
You can talk to a person for REAL advice, Phone: 800.275.4576 Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
Quick delivery and willing to help.
Hope this makes you back up and running :-)
Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
All the best

I need to connect my mac air with my mac mini home computer?

I cannot find out what is needed to connect my mac air with my home computer, a mac mint

If you have a WiFi network at home, the MBA should easily connect to the Mac mini or vice-versa for anything from file sharing, oprical disc sharing, or even screen sharing. Start in System Preferences > Sharing and turn on the desired services. In that same panel you can choose whether that access is for all users or for specific user accounts on the particular system.
Then go to the other computer and open Finder then look under "shared" and select the computer you want to share. If you have activated screen sharing as well as file sharing you will actually have logon to both shares using the user account and password for the user you specified on the other machine.

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard?

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

Do I need to connect to a modem to use the AirPort?

Do I need to connect to a modem to use the AirPort Express? I currently have a PC and thinking about getting a Mac.

To use WiFi only (means as a wireless local area nework only), you do not need a modem but as most of us do, you need to connect it to some type of modem (cable, DSL or fiber optic) in the ethernet port at the bottom to share the Internet connection using WiFi.

What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

Do I need a more recent mac mini to use my iphone 4 with. Im unable to download snow leopard because my mac mini is older. Do I need to get a new mac or is there something else i can do

Do I need a more recent mac mini to use my iphone 4 with. Im unable to download snow leopard because my mac mini is older. Do I need to get a new mac or is there something else i can do

Get Leopard.
System Requirements
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)
http://www.apple.com/iphone/specs.html

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

HT4199 I need help connecting to my WIFI. I purchased a new router and am having trouble connecting.

I need help connecting to my WiFi. I purchased a new router and am having trouble connecting.

your gonna want to contact your internet service provider for the best info on setting that router up. but for connecting to wifi on the iphone, ipad, and ipod
go to
settings > wifi
then choose your connection and enter the password

NEED HELP Connecting To Mac At Office Using ARD 3

Similar Messages

Maybe you are looking for