Need Help: Connecting to Repositroy(Reply to this thread is my doubt only)

Hi,
I am using WLP 10.0
When I open my WLP admin page under content management tab I can see two repositories namely Community_repository and Shared Content Repository.
I created my application (portal application) and created a jsp which uses content API's to fetch the content from these two repositories.
However from debugging I found out that my application does not know anything about these two repositories.
Can anyone provide pointers as to how to connect to and fetch content from WLP repositories.
Also the two repositories that we see on WLP admin page. Does these repositories exist for all the application or they are configured for some selected applications(groupspace) only?
I am really confused.
Please guide.
Shakti
Edited by pshaktig at 09/17/2007 5:10 AM

This is in continuation to my previous post.
I created a portal application and portal web project in workshop.
When I try to connect to the content management system of Weblogic portal, I fail and this is the thing going on from last few days.
Today I was able to successfully create a node and add content to it through my portal application. But again I could do it only for the BEA Repository.
I was not able to access any of the defined repositories (Shared Content Repository, Community_Repository)which comes packaged with your WLP 10.0
Please help
Regards,
Shakti

Similar Messages

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • I need help from Customer Support. Whatever this charge is on my credit card,

     He recibido un cargo de su tienda, que curiosamente he visto que se han hecho muchos cargos a diferentes personas bajo el mismo copncepto y tienda.Favor acreditarme dicho monto porque no he comprado nada con ustedes y ni tengo idea donde está Minesota.Este es mi cargo. 23/07/15323343GEEKSQUAD RENE00015826 RICHFIELD UUSRD$1,428.010.00 Y veo en Internet que otros clientes han hecho reclamos del mismo concepto.   Subject Author PostedGEEKSQUAD RENE00015826Care‎03-09-2015 06:30 PMGEEKSQUAD RENE00015826 Unknown ChargePriscillaQ‎12-29-2014 10:08 PMrandom 10 dollar charge from richfield MN to my ac...ChrisBurns‎07-01-2015 12:50 PMUnknown Geeksquad charge on my Credit CardHardingR‎12-01-2014 05:57 PMGeekSquad protection terms changed without being i... Lo que me hace pensar que algo anda muy mal en ese Best Buy.  Como es posible que no hayan corregido e identificado quienes están detrás de este fraude que lleva años. I need help from Customer Support.  Whatever this charge is on my credit card,jesmann‎10-05-2014 04:52 PM  

    Hola scj2000-
    Muchas gracias por visitar nuestro foro en búsqueda de una explicación al cargo que recién apareció en tu tarjeta de crédito.
    Entiendo su preocupación, ya que cualquier cargo extraño que aparece en un estado de cuenta puede ser alarmante. En este caso, el último cargo que puede recuperar usando el correo electrónico que usaste para registrarte al foro, refleja que se renovó un antivirus Kaspersky. Esta autorización nos diste cuando realizaste la compra de tu Lenovo, desde entonces se renueva automáticamente la licencia de antivirus.
    Las otras publicaciones que has leído, indican lo mismo. Un cargo que se ha hecho a la tarjeta de crédito que se presentó durante la compra con la autorización del cliente.
    Lamento mucho la confusión y espero esto aclare tu duda.
    Atentamente,

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • I need help why does i send to this friend there is a redbox + x

    i need help why does i send to this friend there is a redbox + x , but i send to other friend there is no problem. for anorid samung s3 phone

    Are you sure you have the right pin for your other friend? Try deleting the contact and re-adding them. Also, BBM has to be approved in the countries of both parties.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

    Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
    Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

    Anybody wants to help me ?I wait your answer for my question...!
    Thanks

  • Need help connecting to the internet via Dial-up?

    Hi! My son and his mini have moved back to Vermont, and where he is only dial-up is available. I thought the hookup would be simple......I haven't a clue. I have been on high spped cable for so long that I need help!!!!! Here is what I tried. Phone cable to the modem. (Can't connect it directly to the mini because it only takes an ethernet cable) USB cable from the modem to the mini. Using the Verizon software we got nowhere because we could not get a connection...Need help, Thanks Bill

    The first bit of info is which Verizon number to use to dial-up, so that it is a local call. Is your son going to call from Essex Jct or somewhere else? Basically we need his area code and first three digits of phone number, if you are comfortable giving that. Otherwise you'll have to call Verizon and ask them for the local number to call.
    Then we have to look up how Verizon wants login info. Perhaps another customer can help here. The conventions vary from one ISP to another. Please don't give us you login here!
    That should be enough to get you connected and surfing. Then we have to configure the mail program. But again a little research or help from another Verizon customer will do the trick.
    Please don't install their software. I've spent countless hours removing ISPs' extra software from friends computers. Such software does not necessarily make things faster and it leaves you with a non-standard system. It's also about getting their hooks into you to push more advertising at you and more revenue their way. (This helps explain why they are so eager for you to use their software BTW.)
    There are techniques to speed up dial-up, but they don't involve extra ISP software and ads. They have to do with keeping the ads away in the first place.

  • Need help connecting guitar, a/i, speaker together.

    I'm new to this forum, and sure this has been covered, but i couldn't find what i'm trying to do. I want to connect my guitar to garageband, then output it live to either my stereo. I have an airport express connected to stereo if that helps me or not. At this point i can connect the guitar into my m-audio fast track usb, then into garageband. this works fine for playing through the built in speakers or headphones. I'm having problems finding a way to output live to speakers. Do i need to buy apple speakers to connect directly to my powerbook or can i output to my stereo. Also i might buy an amplifier to play on soon, and was wondering on how to connect that so that i can still go through garageband. I'm new to both garageband and playing guitar so any help would be greatly appreciated. - aaron
    ps also if any one knows of garageband friendly sites that will show tab and strumming patterns to to learn to play popular songs that would be cool too.

    Either go out from the Macs audio out or your fast track to your stereo.

  • Need help connecting SmartView

    I recently got Smarview installed and I'm having issues getting it to connect to the database. This is probably really simple but I have no idea what I'm doing. The person who helped this up with the consultant left right after it was finished and the consultant left the company a few months later. So I have the Essbase bootcamp and little else to go on.
    Our data is hosted by Oracle. I access Essbase via a URL - [Company Specific Info].oracleoutsourcing.com/easconsole/easconsole.jnlp. The server is [Server Name?].oracleoutsourcing.com:10045.
    We also use Workspace https://[Company Specific Info].oracleoutsourcing.com/workspace/index.jsp
    There is also a shared services URL https://[Company Specific Info].oracleoutsourcing.com/interop/content
    So basically I'm asking for help to know if I choose to connect via a shared services provider or a url provider and then what I put in for the address.
    Also anything else I need to be doing - like do I need to be logged into Essbase when I do this. etc would be helpful.

    Not really - I've been looking at the help documents for the past two days and nothing I try works.
    For example, I go to Excel > Hyperion > Connection Manager > Add > URL Provider and then put in https://[admin servcer].oracleoutsourcing.com:13080/aps/smartview
    I click 'Next' and it says the request timed out.
    I Excel > Hyperion > Connection Manager > Add > Shared Services Provider and put in https://XXXXX.oracleoutsourcing.com and click 'Update'
    I get a list of 'Hyperion Shared Services on XXXXX.oracleoutsourcing.com:443'. I click on 'Hyperion Provider' and then '[admin server]:13080'.
    I highlight that and click 'Next'and get the error 'Cannot connext to provider. The server name could not be resolved'

  • Need help connecting to a database with an applet

    I am making a Java game that runs in an applet and needs to connect to a Java DB database. I created the database and table in NetBeans and now I have no idea how to connect this applet to the database. I tried using a DataSource and an InitialContext and I got a NoInitialContextException. Any help would be appreciated thanks.

    Already made the InitialContext. This is the code I used in the applet:
    InitialContext ic = new InitialContext();
    DataSource ds = (DataSource) ic.lookup("jdbc:derby://localhost:1527/GameDatabase");
    Connection con = ds.getConnection();
    Statement stmt = con.createStatement();
    ResultSet rs = stmt.executeQuery("SELECT * FROM Scenery");

  • Need help connecting to database on website!!!!

    Hi there
    I am doing a school project and have decided to make a database which i can store user info and car info (its a car auction program)
    But i am having trouble with the connection to the database... we have been told to use jdbc odbc connection so is there a way to use this method to connect to my database?
    this is my connection code when connecting to the database locally:
    con = DriverManager.getConnection("jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb, *.accdb)};DBQ=CarDealership.accdb");
    i omitted the other code because it is pretty standard code to do this connection.
    But now i want to connect to a database of the same name on this site:
    sites.google.com/site/card3al3rsh1p
    what must i change in my code to be able to connect to the database on the internet????
    please please plssssssss help me really want to get this to work
    thanks and regards

    OK I apologise and realise I was in a rush. I will try explain more clearly now.
    I am using Netbeans 7 and am having troubles connecting my java program to a Microsoft Access database which is on this website:
    sites.google.com/site/card3al3rsh1p/
    The database name is "CarDealership.accdb".
    When I use the class below to connect to my database locally, it is a success.
    import java.sql.*;
    public class DB {
    Connection con;
    Statement stm;
    ResultSet rs;
    public DB(){
    try{
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    con = DriverManager.getConnection("jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb, *.accdb)};DBQ=*CarDealership.accdb*");
    } catch(Exception ex){
    System.out.println("Error opening database.");
    System.out.println(ex);
    System.out.println("Database successfully opened.");
    However, when I change the bold text above (or the text between the asterisks, not sure if it will change) to "sites.google.com//site//card3al3rsh1p//CarDealership.accdb" it throws an error signifying that it can't find the file specified.
    I am unsure of how to connect my program to an external file so I need assistance in how to change the url String of the DriverManager.getConnection() method above so it can connect to the database on the website mentioned above. I would appreciate it if you could assist and thanks.

Maybe you are looking for