Need help connecting to wifi using PEAP

Today is the first time I've even heard of PEAP. My condo told me that connect to the wifi here, I need to use the provided user name and password. When I tried connecting via my iPad and my android phone, they were able to detect that the wifi system is using PEAP and to connect me after I entered in the username and password.
Now I'm trying to connect my laptop running archlinuxx, and wifimenu is unable to automagically figure out how to connect; it finds the correct SSID, but after I select it, it doesn't even prompt me for a username and password. It says:
successfully initialized wpa_supplicant
WPA Authentication/Association Failed
After looking around a bit, I tried adding an entry to my /etc/wpa_supllicant/wpa_supplicant.conf file like this:
network={
ssid="MySSID"
key_mgmt=WPA-EAP
eap=PEAP
identity="myusername"
password="mypassword"
I omitted ca_cert, phase1, phase2and priority, because I've no idea what to put for those values and it seems like my other devices can connect without asking me for those values. I'm just making guesses as to what the values should be for key_mgmt and eap.

You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

Similar Messages

Need help connecting to wifi and bluetooth

Can't connect to wifi or bluetooth. Keep getting told incorrect password. I'm keying in the correct password. Any suggestions on how to fix? Need help!!

You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

Need help connecting to WiFi

I am constantly having trouble connecting to wifi. I've tried numerous mode sand networks and I get the same problem. Can anybody be of some help as to why my Mac is not connecting ?

You'll have to give us some more info as far as error messages or screen shots (Shift-Command-3).

Need Help Connect to MySQL using dg4odbc

I am looking for some help getting a dblink working from my Oracle 11.1.0.6 Dtabase to a MySQL 5.0.77 Database (Holds Bugzilla).
This is the error I get when I try select * from "bugs"@bugz;
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[MySQL][ODBC 5.1 Driver][mysqld-5.0.77]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '"bug_id" FROM "bugs" A1' at line 1
ORA-02063: preceding 2 lines from BUGZ
On Server hosting Oracle DB:
lsb_release -id
Distributor ID: RedHatEnterpriseServer
Description: Red Hat Enterprise Linux Server release 5.7 (Tikanga)
rpm -qa|grep mysql
mysql-connector-odbc-5.1.8-1.rhel5
mysql-5.0.77-4.el5_6.6
tnsping BUGZ
TNS Ping Utility for Linux: Version 11.1.0.6.0 - Production on 08-DEC-2011 07:53:52
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SID = BUGZ)) (HS = OK))
OK (0 msec)
tnsnames.ora
BUGZ =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SID = BUGZ)
    (HS = OK)
)listener.ora
SID_LIST_LISTENER =
(SID_LIST =
     (SID_DESC =
        (ORACLE_HOME = /u00/app/oracle/product/11.1.0/db_1)
        (SID_NAME = BUGZ)
        (PROGRAM = dg4odbc)
        (ENVS ="LD_LIBRARY_PATH=/u00/app/oracle/product/11.1.0/db_1/lib:/usr/lib64:/usr/lib")
.../u00/app/oracle/product/11.1.0/db_1/hs/admin/initbugz.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO=bugz
HS_FDS_TRACE_LEVEL=off
HS_FDS_SHAREABLE_NAME=/usr/lib64/libmyodbc5.so
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P15
# ODBC specific environment variables
set ODBCINI=/u00/home/oracle/.odbc.ini
# Environment variables required for the non-Oracle system
set HOME=/u00/home/oracle
~/u00/home/oracle/.odbc.ini
[ODBC Data Sources]
[bugz]
Driver      = /usr/lib64/libmyodbc5.so
DATABASE    = bugzilla
DESCRIPTION = MySQL ODBC 5.x Connector
PORT        = 3306
SERVER      = bugzilla
UID         = bugquery
PWD         = password
CHARSET     = latin1
TRACEFILE   = /tmp/myodbc-bugzdsn.trc
TRACE       = OFFODBC Test
isql -v bugz
+---------------------------------------+
| Connected!                            |
|                                       |
| sql-statement                         |
| help [tablename]                      |
| quit                                  |
|                                       |
+---------------------------------------+
SQL> help bugs
[Bunch of stuff omitted]
SQLRowCount returns 31
31 rows fetched
SQL>

I did the delete and reconnected and the rows where created again.
I am testing with two SQL statements right now from TOAD and from SQLPlus.
A. select bugs."bug_id" as Ticket, bugs."short_desc", bugs."bug_status" AS Status, bugs."assigned_to", dump(bugs."short_desc") from "bugs"@BUGZ bugs where "bug_id" = 2;
B. select bugs."bug_id" as Ticket, bugs."short_desc", bugs."bug_status" AS Status, bugs."assigned_to" from "bugs"@BUGZ bugs
When I issue "A" I get good looking results. When I issue "B" I get an error.
SQL> select bugs."bug_id" as Ticket, bugs."short_desc", bugs."bug_status" AS Status, bugs."assigned_to", dump(bugs."short_desc") from "bugs"@BUGZ bugs where "bug_id" = 2;
    TICKET
short_desc
STATUS                                                           assigned_to
DUMP(BUGS."SHORT_DESC")
         2
COMA computer has updates set to auto install please disable and allow me to ch
oose
CLOSED                                                                     8
Typ=1 Len=168: 0,67,0,79,0,77,0,65,0,32,0,99,0,111,0,109,0,112,0,117,0,116,0,101
    TICKET
short_desc
STATUS                                                           assigned_to
DUMP(BUGS."SHORT_DESC")
,0,114,0,32,0,104,0,97,0,115,0,32,0,117,0,112,0,100,0,97,0,116,0,101,0,115,0,32,
0,115,0,101,0,116,0,32,0,116,0,111,0,32,0,97,0,117,0,116,0,111,0,32,0,105,0,110,
0,115,0,116,0,97,0,108,0,108,0,32,0,32,0,112,0,108,0,101,0,97,0,115,0,101,0,32,0
,100,0,105,0,115,0,97,0,98,0,108,0,101,0,32,0,97,0,110,0,100,0,32,0,97,0,108,0,1
08,0,111,0,119,0,32,0,109,0,101,0,32,0,116,0,111,0,32,0,99,0,104,0,111,0,111,0,1
    TICKET
short_desc
STATUS                                                           assigned_to
DUMP(BUGS."SHORT_DESC")
15,0,101
SQL> select bugs."bug_id" as Ticket, bugs."short_desc", bugs."bug_status" AS Status, bugs."assigned_to" from "bugs"@BUGZ bugs;
ERROR:
ORA-28528: Heterogeneous Services datatype conversion error
ORA-02063: preceding line from BUGZ
no rows selectedThe bugs table looks like this:
CREATE TABLE `bugs` (
`bug_id` mediumint(9) NOT NULL auto_increment,
`assigned_to` mediumint(9) NOT NULL,
`bug_file_loc` mediumtext,
`bug_severity` varchar(64) NOT NULL,
`bug_status` varchar(64) NOT NULL,
`creation_ts` datetime default NULL,
`delta_ts` datetime NOT NULL,
`short_desc` varchar(255) NOT NULL,
`op_sys` varchar(64) NOT NULL,
`priority` varchar(64) NOT NULL,
`product_id` smallint(6) NOT NULL,
`rep_platform` varchar(64) NOT NULL,
`reporter` mediumint(9) NOT NULL,
`version` varchar(64) NOT NULL,
`component_id` smallint(6) NOT NULL,
`resolution` varchar(64) NOT NULL default '',
`target_milestone` varchar(20) NOT NULL default '---',
`qa_contact` mediumint(9) default NULL,
`status_whiteboard` mediumtext NOT NULL,
`votes` mediumint(9) NOT NULL default '0',
`lastdiffed` datetime default NULL,
`everconfirmed` tinyint(4) NOT NULL,
`reporter_accessible` tinyint(4) NOT NULL default '1',
`cclist_accessible` tinyint(4) NOT NULL default '1',
`estimated_time` decimal(7,2) NOT NULL default '0.00',
`remaining_time` decimal(7,2) NOT NULL default '0.00',
`deadline` datetime default NULL,
`alias` varchar(20) default NULL,
`cf_type` varchar(64) NOT NULL default '---',
`cf_notes` mediumtext,
`keywords` mediumtext NOT NULL,
PRIMARY KEY (`bug_id`),
UNIQUE KEY `bugs_alias_idx` (`alias`),
KEY `bugs_assigned_to_idx` (`assigned_to`),
KEY `bugs_creation_ts_idx` (`creation_ts`),
KEY `bugs_delta_ts_idx` (`delta_ts`),
KEY `bugs_bug_severity_idx` (`bug_severity`),
KEY `bugs_bug_status_idx` (`bug_status`),
KEY `bugs_op_sys_idx` (`op_sys`),
KEY `bugs_priority_idx` (`priority`),
KEY `bugs_product_id_idx` (`product_id`),
KEY `bugs_reporter_idx` (`reporter`),
KEY `bugs_version_idx` (`version`),
KEY `bugs_component_id_idx` (`component_id`),
KEY `bugs_resolution_idx` (`resolution`),
KEY `bugs_target_milestone_idx` (`target_milestone`),
KEY `bugs_qa_contact_idx` (`qa_contact`),
KEY `bugs_votes_idx` (`votes`),
CONSTRAINT `fk_bugs_assigned_to_profiles_userid` FOREIGN KEY (`assigned_to`) REFERENCES `profiles` (`userid`) ON UPDATE CASCADE,
CONSTRAINT `fk_bugs_component_id_components_id` FOREIGN KEY (`component_id`) REFERENCES `components` (`id`) ON UPDATE CASCADE,
CONSTRAINT `fk_bugs_product_id_products_id` FOREIGN KEY (`product_id`) REFERENCES `products` (`id`) ON UPDATE CASCADE,
CONSTRAINT `fk_bugs_qa_contact_profiles_userid` FOREIGN KEY (`qa_contact`) REFERENCES `profiles` (`userid`) ON UPDATE CASCADE,
CONSTRAINT `fk_bugs_reporter_profiles_userid` FOREIGN KEY (`reporter`) REFERENCES `profiles` (`userid`) ON UPDATE CASCADE
) ENGINE=InnoDB AUTO_INCREMENT=4570 DEFAULT CHARSET=utf8;Edited by: Sky13 on Dec 22, 2011 1:36 PM

HT4199 I need help connecting to my WIFI. I purchased a new router and am having trouble connecting.

I need help connecting to my WiFi. I purchased a new router and am having trouble connecting.

your gonna want to contact your internet service provider for the best info on setting that router up. but for connecting to wifi on the iphone, ipad, and ipod
go to
settings > wifi
then choose your connection and enter the password

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Need help connecting to Oracle to create database

Am student taking DBA course; have altered pfile so that path shows where createdb is located. Cannot connect to Oracle; keep getting message "insufficient privileges." Createdb file amended per book to "REMOTE_LOGIN_PASWORDFILE=exclusive" and still can't connect. Can I grant connect privileges to internal/oracle? Tried several times to create database and am now using new database name to try again, but when I get to svrmgrl and type in "connect internal" and give password "oracle" as book says to do I get the "insufficient privileges" message again. Need help.

Linda,
when you use exclusive in remote_login_passwordfile is necessary make one file. Use the following instructions:
orapw file=orapw<SID> password=<password> entries=<users>
where
file=name of password file (mandatory)
password=password for SYS and INTERNAL (mandatory)
entries=maximum number of distinct DBA and OPERs (opt)
There are no spaces around the equal to (=) character.
Find orapwd.exe by Windows Explorer
Bye,
DQC

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

I am trying to rent a movie on iTunes. It keeps telling me that I need to connect to wifi or download on a computer. I am connected. What is the issue? This is maddening!

I am trying to rent a movie on iTunes. It keeps telling me that I need to connect to wifi or download on a computer. I am connected. What is the issue? This is maddening!

If you are using a Windows based computer, try disabling anti virus software and turn off the Firewall.
iTunes for Windows: Troubleshooting security software issues
Then try downloading iTunes media.

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

At your end you will be using your WiFi signal. At the other end the iPhone would be using the 3G cellular signal. The cellular plan would need to be provisioned to allow FaceTime calls over cellular.

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Need help connecting to wifi using PEAP

Similar Messages

Maybe you are looking for