Need help creating a function in SE37....

I am trying to use SE37 to create a function on a remote
SAP system that I will be calling as a BAPI/RFC from XI.
I will be passing in from XI several params and values
that will be referenced in the function code.
I am not a very experienced ABAP programmer, so I'm
hoping that someone can direct me to a tutorial or link
or FAQ that will explain to me the uses for the tabs in
SE37 such as Import, Export, Changing, Tables, etc.
I already have the source code for the function to be
created, just don't know how to fill in the blanks.
Thanks ..

Hi Berkeley,
Please check this links perhaps they may help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f629fa8911d386e70000e82011b8/content.htm
Regards,
Ferry Lianto

Similar Messages

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

Need help creating function

I'm having a real tough time trying to figure out a function
for a dynamic text box. What I am trying to do is have a function
to
call 2 random numbers to a dynamic text box. But the numbers
would be in the form of a question(which I am guessing would have
to be a string value) and then have button that would remove that
question and display a new question.
So, lets say I have this on frame 1 with a button that would
generate the fuction to a dynamic text box on frame 2.
var n1:Number = Math.floor(Math.random() * (13 - 1)) + 1;
var n2:Number = Math.floor(Math.random() * (13 - 1)) + 1;
I need the dynamic text box to display the numbers as a
question, like this for example:
n1 + "+" + n2 + "="
I'm not sure how to make a function for this.
Then a button on frame 2 would be pressed to remove the
question and display a new question.
I know I would need to call the function to generate a new
question but I'm not sure what code to use
to remove the displaying question.
Also, how would I create a counter to keep track of how many
questions are asked, that would add up to 10 questions.
Any suggestions or advice would be very appreciated.
Thanks

Thanks for the reply. Unfortunately I'm not really sure whats
going on in this code.
There's some things I forgot to mention. On frame 2 I have a
user imput text box to anwer the question. I have a function to
calc the numbers. The vars in my first post are the actual vars in
my script. I'll just display my code here so you can see what I'm
trying to do because I'm not sure how I would incorporate your
code. One more thing, I need to use these particular vars for this
project.
Sorry I'm really new to this stuff.
var questionsToAsk:Number = 10;
var questionsAsked:Number = 0;
var questionsCorrect:Number = 0;
var n1:Number = Math.floor(Math.random() * (13 - 1)) + 1;
var n2:Number = Math.floor(Math.random() * (13 - 1)) + 1;
var correctAnswer:Number;
var userAnswer:Number;
function randRange1() {
Math.floor(Math.random() * (13 - 1)) + 1;
return n1;
function randRange2() {
Math.floor(Math.random() * (13 - 1)) + 1;
return n2;
function calcOps(n1,n2) {
correctAnswer = n1 + n2;
return correctAnswer;
What do you suggest I try?

I need to create RFC function module which creates the IDOC

Hi-
Any idea how to create RFC function module which creates the outbound IDOC. If you have any sample code please forward to me.
Thanks,
Sony

My Problem is
Whenever they create Invoice using T-code's like FV65(Parked Document), automatically should create IDOC's...
I have used message type FIDCC1 but this message type is usefull only for Posting documents.
1. Whenever they create parked document, entries will be stored in BKPF(Parked Document-Filed-BKPF-BSTAT = 'V') and Bseg....
2. I have to read entries from those tables and should create IDOC...
3. I checked FM's(FI_IDOC_CREATE_FIDCC1, FI_IDOC_PREPARE) but are not useful...
4. Now I need to write one RFC function module and that FM should create the IDOC's....
Can anyone please help me out?
Thanks,
Sony

I need help with Analytic Function

Hi,
I have this little problem that I need help with.
My datafile has thousands of records that look like...
Client_Id Region Countries
[1] [1] [USA, Canada]
[1] [2] [Australia, France, Germany]
[1] [3] [China, India, Korea]
[1] [4] [Brazil, Mexico]
[8] [1] [USA, Canada]
[9] [1] [USA, Canada]
[9] [4] [Argentina, Brazil]
[13] [1] [USA, Canada]
[15] [1] [USA]
[15] [4] [Argentina, Brazil]
etc
My task is is to create a report with 2 columns - Client_Id and Countries, to look something like...
Client_Id Countries
[1] [USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexico]
[8] [USA, Canada]
[9] [USA, Canada, Argentina, Brazil]
[13] [USA, Canada]
[15] [USA, Argentina, Brazil]
etc.
How can I achieve this using Analytic Function(s)?
Thanks.
BDF

Hi,
That's called String Aggregation , and the following site shows many ways to do it:
http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Which one should you use? That depends on which version of Oracle you're using, and your exact requirements.
For example, is order importatn? You said the results shoudl include:
CLIENT_ID COUNTRIES
1        USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexicobut would you be equally happy with
CLIENT_ID COUNTRIES
1        Australia, France, Germany, China, India, Korea, Brazil, Mexico, USA, Canadaor
CLIENT_ID COUNTRIES
1        Australia, France, Germany, USA, Canada, Brazil, Mexico, China, India, Korea?
Mwalimu wrote:
... How can I achieve this using Analytic Function(s)?The best solution may not involve analytic functions at all. Is that okay?
If you'd like help, post your best attempt, a little sample data (CREATE TABLE and INSERT statements), the results you want from that data, and an explanation of how you get those results from that data.
Always say which version of Oracle you're using.
Edited by: Frank Kulash on Aug 29, 2011 3:05 PM

Iscripts - Need help creating a form in one

I am confused about delimiting in iscripts. I need to create the fiollowing form:
In iscript named IScript1
in function: buildform
buildform has these two inputs, firstname and lastname
the action of the form is also in iscript1 function getinputs
iscript getinputs will just print out the firstname and lastname
Could I get some help with this?
Thanks, Allen Cunningham

Your site is running on an Apache server, so it definitely doesn't support ASP. Apache frequently supports PHP, but I couldn't tell from the headers sent by your server whether it's supported on your site.
I suggest that you contact BT Business support to see if they offer a formmail script. Most hosting companies do. The support pages should describe how to set it up.

Need help creating landscape in AE

Hi, I need to create an animation of a train moving through different landscape scenes. I want the hills to be an actual 3D rendering with the train moving through them but I am unsure how to do this. I am familiar with 3D and can create the hills in my 3D application but how do I get my 3D hill into AE so the train, camera and lights etc. can interact with the hill?
1. How do i get my 3D hill into AE?
2. How do I add the train so it goes around the hills?
3. How do I get the camera and lights etc. to reflect on my 3D hill?

First of all, it would be very helpful to post an example of the kind of look you're going for or a similar shot you're trying to recreate. In animation there are limitless ways of making things so it really helps to be very specific. For now I can advise this much...
1. Render your hills out of your 3D application as an image sequence that supports transperancy if you want to layer them or you want the sky to show up behind them.
2. If you want the train to go around the hills, it really depends on how you make the train. Are you also rendering that in a 3D app?
3. I don't know what you mean by getting the camera to reflect, but when you make a layer 3D, After Effects shows the Material Options settings that allow you to control how your layers react to different lighting setups.

Aperture Workflow - need help creating workflow for photo management

Hi -
I currently shoot with a Canon SD890 (point & shoot) and a Nikon D300 (SLR). My photography is either personal photography or street photography. I may use some of my photography for a web project but that should not be considered right now. I shoot jpegs with the SD890 and RAW with the D300. I need to create a workflow that will allow me to manage all of my photos as well as the RAW vs JPEG aspect. Here are a few initial questions:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives?
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
Thanks for your help!

jnap818 wrote:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives? I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
No, use a single Library. Aperture will have no problems with the various formats or with various different cameras.
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
Actually those date or event driven batches of images are very logically "Projects" in Aperture. Simply name each group of images as you import into AP as a new Project.
IMO it is not good to import camera-to-Aperture (or direct to any app other than the Finder). Best is to use a card reader and use the Finder to copy images from the camera card to a folder on the computer hard drive.
Below is my Referenced-Masters workflow:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and cards are preferable.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive. I label that folder with the Project name suffixed with _masters, that way I can always find the Masters if Aperture forgets where they are.
• Eject CF.
• Burn backup copies of the original images to DVDs or to hard drives (optional backup step).
• Eject backup DVDs/hard drives (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
I strongly recommend that every Aperture user spend $35 and work through the tutorial CD Apple Pro Training Series: Aperture 2 (Apple Pro Training Series) by Ben Long, Richard Harrington, and Orlando Luna (Paperback - May 8, 2008), Amazon.com. Note that the value is in working the tutorial, not in using the book as a manual.
Good luck!
-Allen Wicks

Quick Time VR - need help creating qtvr

I'm teaching my middle school students web design and flash to create an interactive school map. I want to add 360 qtvr's but I need help - I can't seem to get information on how to create them. Any Los Angeles help possible?

QuickTime Pro doesn't create VR files. It only presents them.
http://www.panoramas.dk/quicktime/qtvr/software.html
A pretty good list of tools at that link.

New to Illustrator, need help creating a map?

Need to create a map of a neighborhood. New to program any help would be great!

rdelaroca,
There are vector maps available for many areas.
Or you may work on a locked image from Google Maps or something including the important parts/themes/whatever, using the Pen Tool as the primary tool for shapes in general.

Need Help Creating A Sub-Total Box On 3 Page Invoice

I have a 3 page Invoice with Grand Total on the last page that already totals all three pages together. No Problem here.
I copied & pasted a Sub-Total box from the Template Manager and attached it to the bottom of the first two invoice pages.
The problem is, the Sub-Total amounts continue to add the other page amounts. It's like I have three Grand Total boxes instead of two individual Sub-Total boxes.
Any help would be greatly appreciated!

Sorry for the delay in getting back to you ..... I was looking for a sample that I could provide.
The technique to use would be to get a list of all objects that are on the page that you want to create the subtotal on. Then with this reduced set of objects, search out the individual fields and add then together to make your total. In the example I have we created a function to do this and passed the object subtotal object itself to the function. The function then determines which page the object is on, gets all field objects from that page (in our case we are asking to add all fields called fldSavings), then cycles through each field and totals them and finally returns the sum back to the calling program. Hope this helps .... see the code below we call it in this way:
scoScript.getPageTotals(this.name);
Here is the function:
function getPageTotals(objFld){
var nPage = xfa.layout.absPage(objFld);
var oFields = xfa.layout.pageContent(nPage , "field");
var nFieldCount = oFields.length;
var numFldTotals = 0;
for (var nNodeCount = 0; nNodeCount < nFieldCount; nNodeCount++)
if (oFields.item(nNodeCount).name == "fldSavings")
numFldTotals = numFldTotals + oFields.item(nNodeCount).rawValue;
return numFldTotals;

Need help creating arraylist

I am trying to help a friend in school with a project and we need some help...
We need to write a program to estimate how much paint is needed to paint a house. Assuming we know the square feet that a gallon of paint covers, number of coats required, and the dimensions of the wall, window, door, or gable.
We are using a GUI to enter the data for the different regions.
We have the GUI created and the hierchy competed. I need some help creating the arraylist to run the program.
The user will enter a new region by selecting:
surface type
width
height
then you will be able to add or insert to include this region in the list.
You will also be able modify, delete, or navigate to existing regions in the list by selecting the appropriate navigigation buttons below:
( |< or < or > or >| )
Classes include:
PaintEstimatorView
PainEstimator Model
Regions:
Wall
Door
Gable
Window
And the Approriate Listners
Each region will have its own height and width which are set when the region is created
Each region will compute and return its area and the walls and gables will contribute to the surface; windows and doors will reduce the surface.
each region will calculate its area.
We need to include a View and Model
The view will manage the interface and the model will provide the necessary processing.
responsibilities of the view:
Instantiate and arrange the windowobjects
instantiate and initialize the model
handle user generated events such as button clicks and menu selections by sending message to the model
represent the model to the user.
Model:
Define and manage the applications data(coordinating the activities of several programmer defined classes)
respond to messages from the view
We have the GUI completed I just need some help getting the arraylist started to run the program.
We will need to keep a count and index of all the regions created by the user and you need to be able to shuffle throught them if you need to delete or modify them. You also need to insert windows and doors which will subtract from the total surface area but you have to go back to which ever wall or gable and create the window or door before or after that region.
If anybody could help it would be greatly appreciated.
Thanks in adavnce
Rus

Sorry, I forgot to add my code last night.
This is what we have so far.
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import java.awt.event.*;
public class TestSwingCommonFeatures extends JFrame {
private JRadioButton wall, window, gable, door;
private JButton computegal;
public TestSwingCommonFeatures() {
// Create a panel to group three buttons
JPanel p1 = new JPanel(new GridLayout(2, 2, 5, 5));
JTextField sqftpergal = new JTextField(8);
     JTextField coats = new JTextField(8);
     JTextField gallonsneeded = new JTextField(8);
     gallonsneeded.setEditable(false);
     p1.add(new JLabel("SQ ft / gallon"));
p1.add(sqftpergal);
p1.add(new JLabel("Number of gallons:"));
p1.add(coats);
p1.add(new JLabel("Gallons needed:"));
p1.add(gallonsneeded);
     p1.add(computegal = new JButton("Compute gallons needed"));
     //computegal;
p1.setBorder(new TitledBorder("Select gallons & coats"));
// Create a font and a line border
Font largeFont = new Font("TimesRoman", Font.BOLD, 20);
Border lineBorder = new LineBorder(Color.BLACK, 2);
// Create a panel to group two labels
// panel 2
     JPanel p2 = new JPanel(new GridLayout(4, 2, 5, 5));
p2.add(wall = new JRadioButton("wall"));
p2.add(gable = new JRadioButton("gable"));
     p2.add(new JButton("ADD"));
          p2.add(window = new JRadioButton("window"));
          p2.add(door = new JRadioButton("door"));
               p2.add(new JButton("Remove"));
p2.add(new JLabel("Width"));
p2.add(new JTextField(12));
     p2.add(new JButton("Insert"));
     p2.add(new JLabel("Height"));
p2.add(new JTextField(12));
     p2.add(new JButton("Delete"));
p2.setBorder(new TitledBorder("Controls"));
ButtonGroup radiogroup = new ButtonGroup();
radiogroup.add(wall);
radiogroup.add(gable);
     radiogroup.add(window);
     radiogroup.add(door);
//panel 3
     JPanel p3 = new JPanel(new GridLayout(2, 1, 5, 5));
p3.setBorder(new TitledBorder("Section Selection"));
     p3.add(new JButton("<|"));
          p3.add(new JButton("<"));
               p3.add(new JButton(">"));
                    p3.add(new JButton("|>"));
p3.add(new JLabel("Count"));
p3.add(new JTextField(4));
     p3.add(new JLabel("Index"));
p3.add(new JTextField(4));
// Add two panels to the frame
setLayout(new GridLayout(3, 1, 5, 5));
add(p1);
add(p2);
     add(p3);
public static void main(String[] args) {
// Create a frame and set its properties
JFrame frame = new TestSwingCommonFeatures();
frame.setTitle("TestSwingCommonFeatures");
frame.setSize(600, 400);
frame.setLocationRelativeTo(null); // Center the frame
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
private class UpdateListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Update button was clicked");
private class NavListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Nav button was clicked");
// Create a list to store data
java.util.ArrayList paintList = new java.util.ArrayList();
This is the GUI for the project that we have come up with. I have to write the arraylist for inside the model.
I have tried a couple different things but have been unsuccessful getting it to work. All I am looking for is a start of the arraylist I will try to figure out the rest myself.
Thanks

Need to create a function that will act like the save as browser function

I need to create a button on a web page that will open up a save dialog box and then save the current web page as an .html file on the persons hard drive. The reason for this is because the window is a pop up that does not have the browser menu or any toolbars showing just the what we call print view. This window was used only as a print view so people can print the form out but now the powers that be want a save button as well so the people can save it to there HD. I can do this in IE using javascript but no other browser allows that so I need to create something in java. I have read about the setHeader() to download the file but I am sort of new and from what I've read it all sounds like you will be downloading a specific file and not the web page as a file. Anyone have any ideas as to how I can accomplish this? It doesn't have to be the save as dialog box just a way the person can get the current web page on their HD for viewing offline and done at the press of a button. Thanks.

You'll be wanting to output a PDF or the like instead of a web page. That's the solution to your problem.
Please next time consider using a line break or two when you post. Thank you for your consideration.

Need help pl/sql function body returning SQL query - Reports

I need help with Grouping by on a report that I developed in my application.
I have posted my Code in
Apex.oracle.com
workspace : c a s e _ m a n a g e m e n t
User Id : public
Password : public
I need help on Page 38 Reports.
I get blank lines when I do break by first , second and third columns on the reports attribute.
So I think I have to write "group by " or Distinct in side the SQL query. But not sure how to do it there.
Thank you

Is this an APEX question, then try here:
Oracle Application Express (APEX)
Is this an Oracle Reports question, then try here:
Reports
Is this an SQL question:
Please provide sample data and expected output. Also please show what you have tried already.

Need help creating a function in SE37....

Similar Messages

Maybe you are looking for