Need help creating creating a webservice as per the documentation
I'm trying to setup a webservice with reliable messaging using the NWDS. I'm trying to follow the example given in http://help.sap.com/saphelp_nw72/helpdata/en/46/741a3dfcfa0eede10000000a155369/content.htm
I'm not familiar with J2EE development, so I don't know what wizard I should follow in the "File"->"New" to create the java class.
It looks partly like an application, because they are referring to the application-j2ee-engine.xml, but parly looks like an EJB because it has some EJB annotations (but does not implement any interface):
@SessionHandlingDT(enableSession=true)
public class MyClassBean {
Here is what I tried - I created a New Enterprise Application Project, and it shows application-j2ee-engine.xml and application.xml in the Navigator view. When I right clicked the project and said "New Module", there is a dialog box "Add Modules" "Select Web- and EJB- Modules" but the list is EMPTY.
Please advice.
Dear Customer,
I believe this is a wrong forum for this question.
I kindly ask you to raise this question at:
Service-Oriented Architecture (SOA) and SAP
Best Regards,
Ervin
Similar Messages
-
Hi everyone,
i'm fairly new to RAID scene and i need help for creating RAID 5 with 8 disk's.
I have HP ProLiant DL380 G6 with 8 disk's, each 500 GB.
i'm trying to create RAID 5 and to have one spare disk. I have made array from 7 disk and then create logical drive.
the last disk (8-th) i used as spare.
up to now i think i'm ok???
what confuse me is:
7 HDD X 500GB= 3500GB
after creating array i get 3200 GB, where i lose 300 GB??
after creating logical drive i get 2700 GB, where i lose 500 GB???
from 2700GB i give 150GB for system partition and for data storage i have only 2550 GB.
Why i lose 800GB??
Can someone explain me how RAID 5 works, do i create it correctly and why i lose so much space???
Is there other way to create RAID 5 without losing so much space?
Thanks you in advnce.The first 'loss' you encounter (300MB) is due to megabyte counting/rounding. A 500GB disk contains about 500.000.000 bytes. This quite a bit less than if counted properly using binary. you loose about 24288000 bytes per disk this way!
http://en.wikipedia.org/wiki/Mibibyte |
http://en.wikipedia.org/wiki/Megabyte
the second loss is due to how raid works.in raid 5 data is written to multiple disks to improve reliability. the simplies t form uses 3 disks: a write will cause half of the data to be written to disk 1, half to disk 2 and the XOR of both datahalfs to disk
3. In this scenario you will loose 33% of storage space and you can loose up to one of 3 disks.
By adding more disks, data can be spread more and the ratio available/raw will increase, or you can write aditionnal crc data and increase resliency for failures.
http://en.wikipedia.org/wiki/RAID
To check the exact algoritmes using on you RAID adapter, I would recommend contacting the vendor (or checking their support site) From your numbres, I do not think you will be able to configure RAID 5 on the same disks and having more available
space for your data.
MCP/MCSA/MCTS/MCITP -
Need Help to create new screen for RF Sapconsole
Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alainhi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren -
Need help in creating a chart from 3 datasets
Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate -
Need help to create report with jpeg/gif image
Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
JohnHi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John -
I need help with Creating Key Pairs
Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC��� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm����9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B���T� xp ��ccR}o���[!#I����lo������
����^"`8�|���Z>������&
d ����"B��
^5���a����jw9�����D���D�)�*3/h��7�|��I�d�$�4f�8_�|���yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
} -
Need help in creating Buttons in ADF10g
Hi,
My questions are:
1. Is it possible to modify the width of row in ADF10g. Because the width of rows in my output are high. So I want to reduce it.
2. I need help in creating a new 'createbutton' to create a newlist for the table . for this I have used create button but didnot succed.
3. I also need help in creating 'save button' to save modified data into the table.
4. I need help in creating a select-one-choice and select-one-list for columns of table.
Please help me.
regards,
sanjana
sanjanathe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord -
Need help in creating multiple signature forms?
need help in creating multiple signature forms that can be digitally signed in adobe reader
Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
try -- test the result
set theNumber to theNumber as integer
exit repeat -- success
end try
end repeat
tell application "Finder"
try -- make new folder
set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
try -- make new subfolder
make new folder at newFolder with properties {name:folderName & X}
on error number -48 -- skip errors if the folder is already there
end try
end repeat
end tell -
Need help in creating tabbed webpart in sharepoint and no of tabs in webpart should be dynamic.
under each tab i should be able to add multiple webparts(each tab will have webpart zone)
programatically i need to generate tabs and insert webpart zones under each tab.
Let me know how can i achieve this.
i followed below article.
http://msdn.microsoft.com/en-us/library/jj573263%28v=office.14%29.aspx
but in this article the tabs and webparts are static and we need to close each webpart .
Kindly let me know the approach.thanks in advancethe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord -
Need help for creat apple id in iphone 5s
need help for creat apple id in iphone 5s
See this support document for instructions. http://support.apple.com/kb/HT2731
-
I need help with creating PDF with Preview...
Hello
I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.I can't find it. I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
EDIT: I realized that you cant do batch sequences in standard. Any other ideas? -
I need help to create idoc from scrach.
i need help to create idoc from scrach.
Swamy Katta,
Please read "[the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]" before you post any further, and confirm that you have read them?
=> Search first, ask questions later please!
Julius -
I need help installing Lightroom 5. I tried the trial and it does not have an uninstall feature. Thus, I'm trying to activate with my new $9.99 per month subscription and it simply will not work. Very frustrating you already took my money and no results, and very difficult to get help.
Lightroom Trial uninstall wrote:
Very frustrating you already took my money and no results, and very difficult to get help.
Just for clarity, "we" haven't taken your money - this is a user-to-user forum, and you're not talking to Adobe.
Like Rob I'm a Windows user, and - like him - I thought "uninstalling" on Macs was simply a case of trashing the application. Google would seem to concur.
Not really a Lightroom/Adobe issue, then? -
Need help in modifying mapping parameters of out the box mapping
Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
RagIf you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay. -
Hi, Need help. I am trying to download the latest iTunes for Windows application but on running the program it says that it can not be completed as it can not find the folder location of the file "iTunes.msi" . Any clues would be appreciated
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Question in asa site-site vpn about "ident" ??
hi all , i have a topology as (192.168.0.0/24)LAN1----------------asa1---------------internet-----------------------asa2------------------LAN2(192.168.2.0/24) now , lan 1 can reach lan 2 by site to site vpn but i have a question : when i have #sh cry
-
My Ipod touch 5th gen has been disabled because I can't remember the passcode and has no wifi connection and when I plug it into itunes it says an error has occured. How do I fix it ?
-
Date and time stamp on dump & log file using EXPDP in HP-UX
Hi All, Can someone help me with the below issue O.S Version HP-UX B.11.31 U ia64 Oracle DB Version 11.2.0.3.0 , Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production #!/usr/local/bin/bash ORACLE_HOME=/u01/app/oracle/pr
-
Getting error 'root transaction wanted to commit, but transaction aborted'
We have a module in our project, which reads data from XML file and merges the data into the database. This merging at one end happens to a SQL Server 2005/SQL Server 2000 datbase. At the other end it happens to a Oracle database. We have a portal ap
-
Troubles to open After Effects CC
Hi Everybody, I have some troubles to open After Effects and also Premiere pro CC actually. this is the error message : ALERTE AFTER EFFECTS last report: <140735212468576> <GPUManager> <2> Sniffer Result code 3 Here are some informations about my com