Need help creating horizontal scrollbar in graphic timelime (built in AI)!

I am trying to use Catlyst to build an interactive scrollbar on a graphic timeline build in Adobe Illustrator, I want to be able to scroll from one end of timeline to the other. Can anyone help? Thanks!

Can you post a screenshot of the timeline you are trying to convert. It will help in accurate response.
You would probably need to do it in two step:
- Have the graphic timeline converted into Datalist element, and make the data repeatable.
- Create a Horizontal Scrollbar component and add it to the datalist component (timeilne)
- If you have the Horizontal scrollbar designed, then select it and convert it to a Horizontal Scroll component (using the HUD - the black overlay that comes up when you select a graphic element)
- After conversion you would need to define the parts of the H. Scrollbar (Track, thumb, right button, left button). Note: It helps if you designed your H. Scrollbar with these components in AI/PSD.
- Now come back to the artboard, and select the H. Scrollbar by clicking on it.
- Cut the H. Scrollbar
- Click the Datalist element, and go to Edit Parts (in HUD)
- Paste the H . Scrollbar inside the Datalist element. This will attach the scrollbar to the data.
Hope this helps,
Fu

Similar Messages

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

Need help creating "rubber stamp" logo

I would like to create what should look like a rubber stamp, to place inside an Indesign document. Something like this (drawn very roughly in Photoshop):
However, although I have Illustrator CS4 (Macintosh version) I've never used it and could need some pointers. I use Photoshop a lot however, so if it's remotely similar it may not be that hard. Basically I want to know:
- how to create two circles, one inside the other aligned perfectly
- how to place text in between the two circles, following the curves
- how to place text in the middle circle
- how to make the whole logo "worn" as in "not evenly filled with ink", just like a real rubber stamp would look like on paper.
If the latter isn't possible in Illustrator I can easily do it in Photoshop when bitmapped, but if I could create everything in vector graphics the advantage would be a resizeable logo without any loss.

Thanks for all the suggestions and help!
I've now managed to create my "rubber stamp", but couldn't figure out how to get the "worn" effect.
The link posted above is one solution of course (haven't tried it, but understand the principle), however I personally don't think that makes it look realistic enough. So I exported the image into Photoshop, added a mask and painted through with very low opacity to let the background through here and there in varying densities.
That took care of the uneven ink and worn/damaged sections of the rubber stamp.
But upon importing the Photoshop file into my Indesign document I found out that my rubber stamp is a little too small, so now I need to import the Illustrator file into Photoshop again, resize it a little bigger, then apply the mask/editing again from scratch
I guess there's a better way to do this, only I haven't found out how yet. Suggestions?

Need help while Horizontal clustering

Hi All
I need help while creating horizontal clustering as I have below setup :-
1 windows machine
1 solaris machine
Over solaris machine my domain is active at directory /bea/wls/wls10.3.3/ . In this domain i have a cluster with 2 managed server. Now i want to create a managed server over windows machine and want to administer that from solaris machine admin server.
Can someone please help me with a step by step approiach for this. As i saw some posts but they say that while using pack and unpack commands the direcotry structure should be same which is not possible in my case.Please suggest
Sharad

Hi Sharad,
It is not mandatory to have the NodeManager for Horizontal Clustering. If you dont want to use NodeManager then do the following for Horizontal Clustering:
1.. Create 2-3 Managed Servers from AdminConsole. Suppose 3 Managed Servers MS1,MS2,MS3 …which u want to run on 3 Different Physical Boxes.
2.. Install WebLogic and JDK exactly same Identical Locations in the Managed Server Boxes as well… sothat the JAVA_HOME and WL_HOME and BEA_HOME directories will be same in all the Physical Boxes.
3.. Now Use the “pack/unpack” BEA utility to make the domain zip
if you use ”Pack/Unpack” weblogic utility to do this. By doing this you can ensure that you will never get invalid (domain salt file not found) Or Many Security & SSL Handshake related errors kind of error while starting your ManagedServer remotely. (for detail of Pack/Unpack commands)
http://download.oracle.com/docs/cd/E13179_01/common/docs92/pack/commands.html#wp1068441
4.. Now Whenever u want to start the Managed Servers go inside the “<DOMAIN_HOME>\bin” and then run the “startManagedWebLogic.sh” like folowing
If you want to use Nodemanager in this case then go with nmEnroll option to enroll your machine.
Open a Shell/command prompt in Box-B and then run setWLSEnv.sh/setWLSEnv.cmd
Then Enroll the Nodemanager using WLST command…
http://download-llnw.oracle.com/docs/cd/E15051_01/wls/docs103/nodemgr/nodemgr_config.html#wp1100844
Syntax: nmEnroll([domainDir], [nmHome])
     java weblogic.WLST
     connect('weblogic','weblogic','t3://1.1.1.1:7001')
     nmEnroll('/opt/apps/bea103/user_projects/MyDomainOne','/opt/apps/bea103/wlserver_10.3/common/nodemager')
Above command will Enroll the Nodemanager of Box-B in Domain (MyDomainOne) created in Box-A
--> Start Nodemanager in Box-B
--> Login to AdminConsole of Box-A and then check that the Machine-2 Nodemanager is showing “reachable” or “incative”…Ideally Now it should be ‘Reachable’
--> Login to AdminConsole and Now Create a Cluster and add these both Managed Servers In that Cluster.
--> Now start Both Managed Servers through AdminConsole.
Hope this is clear if you have any further query please let me know.
Regards,
Kal

How to create Horizontal scrollbar

I am using Form6i, how to create a horizontal scrollbar for a multi-record block?
Thanks!

A horizontal scroll bar is not an object that you can drag or resize like a vertical scrollbar. It is implicitly created when needed.
To get a horizontal scroll bar, you have to place the items you want to scroll on a STACKED CANVAS and set property Show Horizontal Scroll Bar of this canvas to Yes.

Need help creating landscape in AE

Hi, I need to create an animation of a train moving through different landscape scenes. I want the hills to be an actual 3D rendering with the train moving through them but I am unsure how to do this. I am familiar with 3D and can create the hills in my 3D application but how do I get my 3D hill into AE so the train, camera and lights etc. can interact with the hill?
1. How do i get my 3D hill into AE?
2. How do I add the train so it goes around the hills?
3. How do I get the camera and lights etc. to reflect on my 3D hill?

First of all, it would be very helpful to post an example of the kind of look you're going for or a similar shot you're trying to recreate. In animation there are limitless ways of making things so it really helps to be very specific. For now I can advise this much...
1. Render your hills out of your 3D application as an image sequence that supports transperancy if you want to layer them or you want the sky to show up behind them.
2. If you want the train to go around the hills, it really depends on how you make the train. Are you also rendering that in a 3D app?
3. I don't know what you mean by getting the camera to reflect, but when you make a layer 3D, After Effects shows the Material Options settings that allow you to control how your layers react to different lighting setups.

Aperture Workflow - need help creating workflow for photo management

Hi -
I currently shoot with a Canon SD890 (point & shoot) and a Nikon D300 (SLR). My photography is either personal photography or street photography. I may use some of my photography for a web project but that should not be considered right now. I shoot jpegs with the SD890 and RAW with the D300. I need to create a workflow that will allow me to manage all of my photos as well as the RAW vs JPEG aspect. Here are a few initial questions:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives?
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
Thanks for your help!

jnap818 wrote:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives? I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
No, use a single Library. Aperture will have no problems with the various formats or with various different cameras.
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
Actually those date or event driven batches of images are very logically "Projects" in Aperture. Simply name each group of images as you import into AP as a new Project.
IMO it is not good to import camera-to-Aperture (or direct to any app other than the Finder). Best is to use a card reader and use the Finder to copy images from the camera card to a folder on the computer hard drive.
Below is my Referenced-Masters workflow:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and cards are preferable.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive. I label that folder with the Project name suffixed with _masters, that way I can always find the Masters if Aperture forgets where they are.
• Eject CF.
• Burn backup copies of the original images to DVDs or to hard drives (optional backup step).
• Eject backup DVDs/hard drives (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
I strongly recommend that every Aperture user spend $35 and work through the tutorial CD Apple Pro Training Series: Aperture 2 (Apple Pro Training Series) by Ben Long, Richard Harrington, and Orlando Luna (Paperback - May 8, 2008), Amazon.com. Note that the value is in working the tutorial, not in using the book as a manual.
Good luck!
-Allen Wicks

Quick Time VR - need help creating qtvr

I'm teaching my middle school students web design and flash to create an interactive school map. I want to add 360 qtvr's but I need help - I can't seem to get information on how to create them. Any Los Angeles help possible?

QuickTime Pro doesn't create VR files. It only presents them.
http://www.panoramas.dk/quicktime/qtvr/software.html
A pretty good list of tools at that link.

New to Illustrator, need help creating a map?

Need to create a map of a neighborhood. New to program any help would be great!

rdelaroca,
There are vector maps available for many areas.
Or you may work on a locked image from Google Maps or something including the important parts/themes/whatever, using the Pen Tool as the primary tool for shapes in general.

Need help creating a layered component

I'm trying to create a component with one to sixteen layers of graphics in it, and I can't work out how to! The ideas I've had so far involved creating several images, adding graphics objects to them etc., and painting each individualy, and then painting them all to the main component. But the idea I came up with today seems smarter - actually make the component consist of sixteen (or less) other components, on top of one another. The only problem with this is that I don't know how to put one component onto another, and I don't know how to make sure they're in the right order (i.e. the foreground image is displayed above the background one).
If anyone has any suggestions/links for this - or an alternative solution to my problems - please post!
Thanks -
K

Sounds like you need to use Layered Panes:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

Need help creating arraylist

I am trying to help a friend in school with a project and we need some help...
We need to write a program to estimate how much paint is needed to paint a house. Assuming we know the square feet that a gallon of paint covers, number of coats required, and the dimensions of the wall, window, door, or gable.
We are using a GUI to enter the data for the different regions.
We have the GUI created and the hierchy competed. I need some help creating the arraylist to run the program.
The user will enter a new region by selecting:
surface type
width
height
then you will be able to add or insert to include this region in the list.
You will also be able modify, delete, or navigate to existing regions in the list by selecting the appropriate navigigation buttons below:
( |< or < or > or >| )
Classes include:
PaintEstimatorView
PainEstimator Model
Regions:
Wall
Door
Gable
Window
And the Approriate Listners
Each region will have its own height and width which are set when the region is created
Each region will compute and return its area and the walls and gables will contribute to the surface; windows and doors will reduce the surface.
each region will calculate its area.
We need to include a View and Model
The view will manage the interface and the model will provide the necessary processing.
responsibilities of the view:
Instantiate and arrange the windowobjects
instantiate and initialize the model
handle user generated events such as button clicks and menu selections by sending message to the model
represent the model to the user.
Model:
Define and manage the applications data(coordinating the activities of several programmer defined classes)
respond to messages from the view
We have the GUI completed I just need some help getting the arraylist started to run the program.
We will need to keep a count and index of all the regions created by the user and you need to be able to shuffle throught them if you need to delete or modify them. You also need to insert windows and doors which will subtract from the total surface area but you have to go back to which ever wall or gable and create the window or door before or after that region.
If anybody could help it would be greatly appreciated.
Thanks in adavnce
Rus

Sorry, I forgot to add my code last night.
This is what we have so far.
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import java.awt.event.*;
public class TestSwingCommonFeatures extends JFrame {
private JRadioButton wall, window, gable, door;
private JButton computegal;
public TestSwingCommonFeatures() {
// Create a panel to group three buttons
JPanel p1 = new JPanel(new GridLayout(2, 2, 5, 5));
JTextField sqftpergal = new JTextField(8);
     JTextField coats = new JTextField(8);
     JTextField gallonsneeded = new JTextField(8);
     gallonsneeded.setEditable(false);
     p1.add(new JLabel("SQ ft / gallon"));
p1.add(sqftpergal);
p1.add(new JLabel("Number of gallons:"));
p1.add(coats);
p1.add(new JLabel("Gallons needed:"));
p1.add(gallonsneeded);
     p1.add(computegal = new JButton("Compute gallons needed"));
     //computegal;
p1.setBorder(new TitledBorder("Select gallons & coats"));
// Create a font and a line border
Font largeFont = new Font("TimesRoman", Font.BOLD, 20);
Border lineBorder = new LineBorder(Color.BLACK, 2);
// Create a panel to group two labels
// panel 2
     JPanel p2 = new JPanel(new GridLayout(4, 2, 5, 5));
p2.add(wall = new JRadioButton("wall"));
p2.add(gable = new JRadioButton("gable"));
     p2.add(new JButton("ADD"));
          p2.add(window = new JRadioButton("window"));
          p2.add(door = new JRadioButton("door"));
               p2.add(new JButton("Remove"));
p2.add(new JLabel("Width"));
p2.add(new JTextField(12));
     p2.add(new JButton("Insert"));
     p2.add(new JLabel("Height"));
p2.add(new JTextField(12));
     p2.add(new JButton("Delete"));
p2.setBorder(new TitledBorder("Controls"));
ButtonGroup radiogroup = new ButtonGroup();
radiogroup.add(wall);
radiogroup.add(gable);
     radiogroup.add(window);
     radiogroup.add(door);
//panel 3
     JPanel p3 = new JPanel(new GridLayout(2, 1, 5, 5));
p3.setBorder(new TitledBorder("Section Selection"));
     p3.add(new JButton("<|"));
          p3.add(new JButton("<"));
               p3.add(new JButton(">"));
                    p3.add(new JButton("|>"));
p3.add(new JLabel("Count"));
p3.add(new JTextField(4));
     p3.add(new JLabel("Index"));
p3.add(new JTextField(4));
// Add two panels to the frame
setLayout(new GridLayout(3, 1, 5, 5));
add(p1);
add(p2);
     add(p3);
public static void main(String[] args) {
// Create a frame and set its properties
JFrame frame = new TestSwingCommonFeatures();
frame.setTitle("TestSwingCommonFeatures");
frame.setSize(600, 400);
frame.setLocationRelativeTo(null); // Center the frame
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
private class UpdateListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Update button was clicked");
private class NavListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Nav button was clicked");
// Create a list to store data
java.util.ArrayList paintList = new java.util.ArrayList();
This is the GUI for the project that we have come up with. I have to write the arraylist for inside the model.
I have tried a couple different things but have been unsuccessful getting it to work. All I am looking for is a start of the arraylist I will try to figure out the rest myself.
Thanks

Iscripts - Need help creating a form in one

I am confused about delimiting in iscripts. I need to create the fiollowing form:
In iscript named IScript1
in function: buildform
buildform has these two inputs, firstname and lastname
the action of the form is also in iscript1 function getinputs
iscript getinputs will just print out the firstname and lastname
Could I get some help with this?
Thanks, Allen Cunningham

Your site is running on an Apache server, so it definitely doesn't support ASP. Apache frequently supports PHP, but I couldn't tell from the headers sent by your server whether it's supported on your site.
I suggest that you contact BT Business support to see if they offer a formmail script. Most hosting companies do. The support pages should describe how to set it up.

Need help creating URL for getImage

In the following code example, I get an error when javac compiling. I need help, because I cannot determine what is wrong. "....." denotes extraneous code removed for readability.
import java.awt.*;
import java.io.*;
import java.applet.*;
import java.net.*;
public class testapp extends java.applet.Applet implements java.lang.Runnable
public static void main(String[] argv)
��.
public void init()
Toolkit toolkit = Toolkit.getDefaultToolkit();
Image image1 = toolkit.getImage("imageFile.gif");
Image image2 = toolkit.getImage( new URL("http://java.sun.com/graphics/people.gif"));
��
javac reports:
unreported exception java.net.MalformedURLException; must be caught or declared to be thrown
Image image2 = toolkit.getImage( new URL ("http://java.sun.com/graphics/people.gif"));
................................................^

With this recommended code:
===================
try { Image image2 = toolkit.getImage( new URL ("http://java.sun.com/graphics/people.gif"));}catch(MalformURLExceptione){System.out.println("Error"); }
======================
it now compiles ok, but when I access the page through the browser, I get "applet not initialized" and the page times out.
With the lines commented out, the page loads.
What does this tell us:
- all we have done is mask a problem that the compiler previously highlighted.
But what is the problem?
As far as I can tell, the code is exact copies from the examples posted online.
Where should System.out.println("Error"); be displayed? I can't find it. There might be a clue in the error message.

Need help creating many, many users.

Hi,
I need to create around 500,000 users in the iFS schema in the quickest possible way.
The java API will do about 2 a second, which gives me an overhead of a few days?!?
Any suggestions would be greatly appreciated.
Thanks, this list has never let me down yet ;o)
Paul.
null

Paul, we have not tested creating that many users in iFS, so we don't know if you will run into any issues. And I don't have any timed stats for creating users through XML.
But we believe that using the Java API is the fastest way to create users.
You will want to create the users in batch, and disconnect between batches, as the JVM memory will increase during the create.
So you may want to create the users 10,000 at a time, and then disconnect and reconnect to create the next 10,000. Set your java MX setting for the JVM as high as you can (say, 768M), and then measure your memory usage for the first 10,000 users to see close to the MX setting the JVM gets.

I need help creat

I install windows vista in my computer and conect my zen micro 5gb and dont work beacause is not compatible, my language is spanish i need help driver or some to fixed my problem thank you atte. jose campoy (my country is spain)

ok well i remeberin reading somewhere that the firmware needs upgraded to work with vista but it need to be done in a xp machine maybe try these forums over here http://forums.creative.com/creativel...d?board.id=dap

Need help creating horizontal scrollbar in graphic timelime (built in AI)!

Similar Messages

Maybe you are looking for