Need help creating installation media

Hello, I need some help.
I have installed arch, with kde, and I've been working on it couple weeks until finally configured the way I like it, and everything works fine (wireless, sound, video etc...)
Now I would like to create an install CD (or backub or ISO or whatever) that contains my current system as it is right now, with everything I have, including all the packages, and conky, and wallpaper, and network manager, and all the config files, I mean everything...
So if I want to format my harddisk, I can put back my system as it is now...
Is it possible?
And if it is, then how?

One thing you can try is create a tar archive of /home and /etc, then use these pacman tips to create a list of packages that you have currently installed. You can then use this list to install the packages on a fresh install. Even in /etc/ just backup the config files you need like for your wifi setup, xorg.conf and maybe rc.conf and leave the rest as they may change down the line. Your home partition contains the necessary settings for KDE, wallpaper and conky.
You should try this method in a virtual machine and see how well it works and what needs to be tweaked around. You don't want to backup "everything" (as in /bin /boot /tmp /var) as a fresh install will more than likely conflict with your backup files if you do intend to use them later.

Similar Messages

Windows 10 media creation tool closes after creating installation media

I have just upgraded my Windows 8 PC to Windows 8.1. Now I wanted to upgrade it to Windows 10, and for that I downloaded the media creation tool and used the "UPGRADE MY PC NOW" option. It downloaded fine and after the download it went to Verification and then to Creating Installation Media for Windows 10.After it was complete to 100% , the Window immediately closed and nothing happened. Any help?

I would create the bootable media and upgrade using that. You will need a 8gb or larger flash drive, once created you boot from that and start the upgrade process.

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need help with installation

I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.

Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
>

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

Creating Installation Media component for Database Provisioning in OEM 12c

When creating installation media to use in a database provisioning procedure, do I have to unzip and rezip Disk 1 and 2 before I load them into OEM? I mean can't I just upload the zip files and tell OEM which is the "Main File" via the drop down box in the "Specify Source" section of the "Select Files" tab of the software library entity page?

Thanks for the answer Courtney. Then may I ask, what is the meaning of that "Main File" selection box on the file page?

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

Aperture Workflow - need help creating workflow for photo management

Hi -
I currently shoot with a Canon SD890 (point & shoot) and a Nikon D300 (SLR). My photography is either personal photography or street photography. I may use some of my photography for a web project but that should not be considered right now. I shoot jpegs with the SD890 and RAW with the D300. I need to create a workflow that will allow me to manage all of my photos as well as the RAW vs JPEG aspect. Here are a few initial questions:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives?
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
Thanks for your help!

jnap818 wrote:
1) Should I separate the RAW and JPEGs in Aperture (two libraries)? One library for finished photos and one for negatives? I am interested to hear how others do this...especially if you use both point & shoot and SLR cameras.
No, use a single Library. Aperture will have no problems with the various formats or with various different cameras.
2) What folder structure should I use? Since I am not a professional photographer, I won't be shooting projects. I think something date or event driven would be best (preferably both).
Actually those date or event driven batches of images are very logically "Projects" in Aperture. Simply name each group of images as you import into AP as a new Project.
IMO it is not good to import camera-to-Aperture (or direct to any app other than the Finder). Best is to use a card reader and use the Finder to copy images from the camera card to a folder on the computer hard drive.
Below is my Referenced-Masters workflow:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and cards are preferable.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive. I label that folder with the Project name suffixed with _masters, that way I can always find the Masters if Aperture forgets where they are.
• Eject CF.
• Burn backup copies of the original images to DVDs or to hard drives (optional backup step).
• Eject backup DVDs/hard drives (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
I strongly recommend that every Aperture user spend $35 and work through the tutorial CD Apple Pro Training Series: Aperture 2 (Apple Pro Training Series) by Ben Long, Richard Harrington, and Orlando Luna (Paperback - May 8, 2008), Amazon.com. Note that the value is in working the tutorial, not in using the book as a manual.
Good luck!
-Allen Wicks

Need help creating landscape in AE

Hi, I need to create an animation of a train moving through different landscape scenes. I want the hills to be an actual 3D rendering with the train moving through them but I am unsure how to do this. I am familiar with 3D and can create the hills in my 3D application but how do I get my 3D hill into AE so the train, camera and lights etc. can interact with the hill?
1. How do i get my 3D hill into AE?
2. How do I add the train so it goes around the hills?
3. How do I get the camera and lights etc. to reflect on my 3D hill?

First of all, it would be very helpful to post an example of the kind of look you're going for or a similar shot you're trying to recreate. In animation there are limitless ways of making things so it really helps to be very specific. For now I can advise this much...
1. Render your hills out of your 3D application as an image sequence that supports transperancy if you want to layer them or you want the sky to show up behind them.
2. If you want the train to go around the hills, it really depends on how you make the train. Are you also rendering that in a 3D app?
3. I don't know what you mean by getting the camera to reflect, but when you make a layer 3D, After Effects shows the Material Options settings that allow you to control how your layers react to different lighting setups.

Quick Time VR - need help creating qtvr

I'm teaching my middle school students web design and flash to create an interactive school map. I want to add 360 qtvr's but I need help - I can't seem to get information on how to create them. Any Los Angeles help possible?

QuickTime Pro doesn't create VR files. It only presents them.
http://www.panoramas.dk/quicktime/qtvr/software.html
A pretty good list of tools at that link.

New to Illustrator, need help creating a map?

Need to create a map of a neighborhood. New to program any help would be great!

rdelaroca,
There are vector maps available for many areas.
Or you may work on a locked image from Google Maps or something including the important parts/themes/whatever, using the Pen Tool as the primary tool for shapes in general.

Need help for installation

Hello world,
I´m absolutely new in the world of SAP and just started lessons in ABAP on Netweaver 7.02.
Our teacher told us to install a mini SAP at home for training, so I download this :
SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition
And this is my problem : I never installed a system like this before.
My Notebook have : 2.16 GHz, 8 GB RAM, 500 GB Harddisk
Did I need something else and how can I get it ?
How to start installation ?
Is there any installation guide ?
I'll be thankful for any advice.
Peter

Hi Peter,
This two links are help for installation
Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
http://www.solution-soft.com/whitepapers/SAP/Time-Machine_Windows-2008_SAP-NetWeaver.htm
Regards,
Visu

Need help creating arraylist

I am trying to help a friend in school with a project and we need some help...
We need to write a program to estimate how much paint is needed to paint a house. Assuming we know the square feet that a gallon of paint covers, number of coats required, and the dimensions of the wall, window, door, or gable.
We are using a GUI to enter the data for the different regions.
We have the GUI created and the hierchy competed. I need some help creating the arraylist to run the program.
The user will enter a new region by selecting:
surface type
width
height
then you will be able to add or insert to include this region in the list.
You will also be able modify, delete, or navigate to existing regions in the list by selecting the appropriate navigigation buttons below:
( |< or < or > or >| )
Classes include:
PaintEstimatorView
PainEstimator Model
Regions:
Wall
Door
Gable
Window
And the Approriate Listners
Each region will have its own height and width which are set when the region is created
Each region will compute and return its area and the walls and gables will contribute to the surface; windows and doors will reduce the surface.
each region will calculate its area.
We need to include a View and Model
The view will manage the interface and the model will provide the necessary processing.
responsibilities of the view:
Instantiate and arrange the windowobjects
instantiate and initialize the model
handle user generated events such as button clicks and menu selections by sending message to the model
represent the model to the user.
Model:
Define and manage the applications data(coordinating the activities of several programmer defined classes)
respond to messages from the view
We have the GUI completed I just need some help getting the arraylist started to run the program.
We will need to keep a count and index of all the regions created by the user and you need to be able to shuffle throught them if you need to delete or modify them. You also need to insert windows and doors which will subtract from the total surface area but you have to go back to which ever wall or gable and create the window or door before or after that region.
If anybody could help it would be greatly appreciated.
Thanks in adavnce
Rus

Sorry, I forgot to add my code last night.
This is what we have so far.
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import java.awt.event.*;
public class TestSwingCommonFeatures extends JFrame {
private JRadioButton wall, window, gable, door;
private JButton computegal;
public TestSwingCommonFeatures() {
// Create a panel to group three buttons
JPanel p1 = new JPanel(new GridLayout(2, 2, 5, 5));
JTextField sqftpergal = new JTextField(8);
     JTextField coats = new JTextField(8);
     JTextField gallonsneeded = new JTextField(8);
     gallonsneeded.setEditable(false);
     p1.add(new JLabel("SQ ft / gallon"));
p1.add(sqftpergal);
p1.add(new JLabel("Number of gallons:"));
p1.add(coats);
p1.add(new JLabel("Gallons needed:"));
p1.add(gallonsneeded);
     p1.add(computegal = new JButton("Compute gallons needed"));
     //computegal;
p1.setBorder(new TitledBorder("Select gallons & coats"));
// Create a font and a line border
Font largeFont = new Font("TimesRoman", Font.BOLD, 20);
Border lineBorder = new LineBorder(Color.BLACK, 2);
// Create a panel to group two labels
// panel 2
     JPanel p2 = new JPanel(new GridLayout(4, 2, 5, 5));
p2.add(wall = new JRadioButton("wall"));
p2.add(gable = new JRadioButton("gable"));
     p2.add(new JButton("ADD"));
          p2.add(window = new JRadioButton("window"));
          p2.add(door = new JRadioButton("door"));
               p2.add(new JButton("Remove"));
p2.add(new JLabel("Width"));
p2.add(new JTextField(12));
     p2.add(new JButton("Insert"));
     p2.add(new JLabel("Height"));
p2.add(new JTextField(12));
     p2.add(new JButton("Delete"));
p2.setBorder(new TitledBorder("Controls"));
ButtonGroup radiogroup = new ButtonGroup();
radiogroup.add(wall);
radiogroup.add(gable);
     radiogroup.add(window);
     radiogroup.add(door);
//panel 3
     JPanel p3 = new JPanel(new GridLayout(2, 1, 5, 5));
p3.setBorder(new TitledBorder("Section Selection"));
     p3.add(new JButton("<|"));
          p3.add(new JButton("<"));
               p3.add(new JButton(">"));
                    p3.add(new JButton("|>"));
p3.add(new JLabel("Count"));
p3.add(new JTextField(4));
     p3.add(new JLabel("Index"));
p3.add(new JTextField(4));
// Add two panels to the frame
setLayout(new GridLayout(3, 1, 5, 5));
add(p1);
add(p2);
     add(p3);
public static void main(String[] args) {
// Create a frame and set its properties
JFrame frame = new TestSwingCommonFeatures();
frame.setTitle("TestSwingCommonFeatures");
frame.setSize(600, 400);
frame.setLocationRelativeTo(null); // Center the frame
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
private class UpdateListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Update button was clicked");
private class NavListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
System.out.println("Nav button was clicked");
// Create a list to store data
java.util.ArrayList paintList = new java.util.ArrayList();
This is the GUI for the project that we have come up with. I have to write the arraylist for inside the model.
I have tried a couple different things but have been unsuccessful getting it to work. All I am looking for is a start of the arraylist I will try to figure out the rest myself.
Thanks

Iscripts - Need help creating a form in one

I am confused about delimiting in iscripts. I need to create the fiollowing form:
In iscript named IScript1
in function: buildform
buildform has these two inputs, firstname and lastname
the action of the form is also in iscript1 function getinputs
iscript getinputs will just print out the firstname and lastname
Could I get some help with this?
Thanks, Allen Cunningham

Your site is running on an Apache server, so it definitely doesn't support ASP. Apache frequently supports PHP, but I couldn't tell from the headers sent by your server whether it's supported on your site.
I suggest that you contact BT Business support to see if they offer a formmail script. Most hosting companies do. The support pages should describe how to set it up.

Need help creating many, many users.

Hi,
I need to create around 500,000 users in the iFS schema in the quickest possible way.
The java API will do about 2 a second, which gives me an overhead of a few days?!?
Any suggestions would be greatly appreciated.
Thanks, this list has never let me down yet ;o)
Paul.
null

Paul, we have not tested creating that many users in iFS, so we don't know if you will run into any issues. And I don't have any timed stats for creating users through XML.
But we believe that using the Java API is the fastest way to create users.
You will want to create the users in batch, and disconnect between batches, as the JVM memory will increase during the create.
So you may want to create the users 10,000 at a time, and then disconnect and reconnect to create the next 10,000. Set your java MX setting for the JVM as high as you can (say, 768M), and then measure your memory usage for the first 10,000 users to see close to the MX setting the JVM gets.

Need help creating installation media

Similar Messages

Maybe you are looking for