Need help - deadline approaching

Hi
I have a project done completely from multicam clips. Everything is fine when I play the clip in FCPX 10.1.1 . BUT when I try to export using share (master) the sound is gone only a loud his can be heard. As I said in FCPX it plays perfectly fine. The project was 10 days work and is finished ..... Any idea what can be wrong???
I work with FCP since over 8 years now, with X since 2 years, never had such probelms. I really need help !!! Thanks

If you want to use external application to record your computer sound you can try "SoundFlower" it routes audio from your computer (no ambience or external sound) to the recording software which can be (Quicktime, Screenflow, etc..) then find a way to combine audio with video from FCP.
Here is a how to record sound with sound flower
I hope this will solve.

Similar Messages

Help Needed Urgently- Deadline Approaching

I have developed a CD ROM, and it was working ok up til now.
When I go to play the projector file now, it sometimes runs out of
virtual memory, saying flash is low on memory. to increase
available memory quit flash and allocate more memory in the system
properties dialogue box.
Can somebody please tell me, is this that my computer hasn't
enough RAM or is there a properties menu i can't see?
the program is only 5.38MB so I can't see why there would be
a problem. there are quite a few videos in it, but the problems
don't occurr when I go to use the videos and they are streamed from
outside the projector so memory should only be used when they are
called on?
The frames it happens on are purely text, with an image, no
videos or major coding. It happens with three buttons that i can
see

I hope this helps. I had a similar problem when using scenes.
If you have a screen with more than one frame in a layer that
is recursive (no stop), it will just continue to loop around and
around, even though not necessarily visible to the user. I recall
that if the cycle goes more than a certain amount -- 256 loops(?)
-- Flash stops the program and gives that error.
Some of the experts here can (hopefully) provide the real
technical reason why this happens. But, I was able to fix it by
making sure that I did not have any recursive loops in any scene.
I hope this starts a thread of discussion with experts,
because I am pretty sure this the issue. You may also search for
resolutions using this principle as your search criteria. That is
how I found my solution.
r

Need help with Different approaches to setting variables in a Flash movie in Adobe Flash CS3 Professional Version

Hi,
I'm using Adobe Flash CS3 Professional version of Flash
software,
I need help and guidance on
Different approaches to setting variables in a Flash movie,
what I should do in the fla file, and in the html file.
Thanks, Gil

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help willing to pay NOW deadline!!!

Please email me here:
[email protected]
I need help NOW... We have a very serious deadline. I need a 20 min phone consultation from anyone out there that really knows. Final cut. Our aspect ratio is all messed up and we can not fix it. Please email breif credentials and we wil reply with phone number and cash thru PayPal.
Thx, Alex

Well no one wants to call me so here goes: We have two sequences, a demo reel of our special effects (from multi artist) and our doc demo reel. The SE demo reel was squished tall every time we exported to QT. So we had one of our employees fix it by making it extra wide to compensate. Now when we export the SE demo reel is fine but the doc demo reel is exporting too wide now. It is as if the setting for the SE demo reel aspect ratio settings have changed everything including the doc demo reel. These export options are driving us crazy, we can't seem to get this thing back the way it was. I suppose we could change every clip's aspect ratio by hand to compensate for the stretching wide, in other words squish it tall again to make it come out right. The who originally changed the aspect ratio to fix the first problem with the SE Demo changed everything to 33.33 but we can not figure out what it original was before they went in and changed each clip of the SE Demo. Confusing I know... Please help we have to have these overnighted by 5PM today!!! Can any one save us? Thanks, Alex

If anyone could help me I would be HUGELY appreciative - Uni deadline today and need help!

Hi
I'm reasonably new to indesign but know the basics. I have a deadline today but my InDesign CS6 is behaving strangely - If anyone could help me I would be HUGELY appreciative.
I'm trying to type like I normally would but whenever I try to place a piece of punctuation at the end of a paragraph or line, it places it at the start of the line.. even if my cursor is telling it to do differently. (see image)
I'm trying to place it at the end of legibility where my cursor is but it places it at the start of clarity at the start of the line!? does anyone have any ideas, need help with this ASAP
Thanks a lot!
Joe

@Joel – do you work with the Adobe World-Ready-Composer in conjunction with a RTL (Right-To-Left) character format? Maybe you could show us your paragraph with "Hidden Characters"on. Together with your definitions of the character style for the dot, the character style for all other characters and the paragraph style.
I could mimic something like you are showing with a very strange set of scripts generating a paragraph style and two character styles in InDesign CS5.5.
See the following screen grabs:
Character Style named "ZF_LTR" for all characters in the paragraph but the last one (the dot):
Character Style named "ZF_Arabic" for the last character in the paragraph:
Paragraph Style named "AF_MIXED2_LTR-RTL" for the whole paragraph. Not formatted properly for Arabic use. See the details in the section "Formateinstellungen" in the screen grab:
That would be an explanation…
Might be, that there is another one.
Uwe

DVD Studio Pro Newbie Needs Help!

I have a presentation deadline approaching and I need help desperately. I created my presentation using Keynote 3 (800*600 slides) and exported it to a Quicktime movie using H.264 compression at 29.97 fps (high quality settings). I then proceeded to use iDVD 6 and imported the Quicktime movie and created a simple menu using the templates provided.
I saved the entire project as a disk image and used the DVD player to check the disk image file. The quality of the DVD disk image file looked nothing like the original Quicktime movie. The images and text looked blurry and unprofessional.
I've spend quite some time on the iDVD and Keynote discussion forums and can't find a solution to my problem. The conclusion I've come is that the mpeg-2 encoder that iDVD 6 uses is problematic.
I don't want to start using DVD Studio Pro but I will in order to preserve the quality of my original Keynote presentation. So here are my questions...thank you in advance for your help guys....I really need it:
- I plan on playing the DVD on a 42" Plasma display at a sales office and also distributing it to potential buyers. Are my Keynote export settings optimal for iDVD use? Should I be using H.264 @ 29.97?
- If I must use DVDSP then what export/compression settings should I use in Keynote to preserve the quality? Keynote doesn't give me an option to use mpeg-2. I have ffmpegX so I can encode different formats...just need to know the correct one.
- Keynote exports separate audio and video files. I combined them using Quicktime. Is it possible to use the combined file in DVDSP or do they need to be separate.
Thanks for taking the time to read this post. Any help would be greatly appreciated. Also, if you have any reading material pertaining to this matter please provide link.
~Eddie~
PowerBook G4 Mac OS X (10.4.5)

You can use a mov file that contains both audio and video. DVD Studio Pro will compress the mov itself. I am not overly familiar with the codec H.264 but either way its a codec that compresses the video, and if I am right that codec is used for compressing video to web based file sizes, which means heavy compression. When I create DVD material I use M2V format which is what DVD SP wants anyways so it cuts time and drive space in half. If you export an mov and import it into DVD SP, DVD SP compresses the file again which is M2V. Now you have two files, with twice the compression time. When creating M2V the only thing that you need o be aware of is the bit rate, which needs to be adjusted pending the duration of the video. Use 29.97 if you are NTSC and full frame rate, which you should be.
If you can not create an M2V file with associated aiff audio file, than export your QT file as uncompressed or as a QT Movie. The file itself will be huge but DVD SP will compress it properly.
I hope this helps

Need Help in opening a Link or URL

Hi,
I need help in opening a URL (on the same server where CLM application is deployed). I have added a Button on ToolBar and added the code. but it's not working. the same java program is working on my local system. below is the code.
import java.io.*;
import java.util.*;
public class FileOpen
       public static void main(String[] args)
             FileOpen deleteList = new FileOpen();
             String url="http://www.google.com/";
               try {
                    String[] cmd = new String[4];
                    cmd[0] = "cmd.exe";
                    cmd[1] = "/C";
                    cmd[2] = "start";
                    cmd[3] = "c:
amd_SCCMLog.txt";
                    System.out.println(" cmd"+cmd);
                    Process p = Runtime.getRuntime().exec(cmd);
                    System.out.println(" cmd1"+cmd);
                    Process process = Runtime.getRuntime().exec("notepad");
                    System.out.println(" cmd2"+cmd);
                    } catch (IOException ioe)
                         ioe.printStackTrace();
             //System.out.println("Memberfarm: " + memberFarm);
Regards,
Puneet Aggarwal

Hi Puneet,
What exactly are you trying to do? Can you describe where in the system you are doing it? There are different options....
What about a document report with a link to the Web site URL you want to open?
What about a read-only URL field on the document, populated with the URL you want to open?
What about the desktop links channel?
Lots of different ways to skin that cat (sorry cat lovers) ..your code looks like it might be the most difficult approach.
-Howie Wexler
www.craftysystems.com

Newbie needs help with Flex app

Hi there. I am very new to Flex and also fairly new to
programming although I do have a little experience.
I am trying to create an app which stores code snippets or
common text I tend to use every day in my documents and emails.
So basically I need help on a design level. I can refer to
the developer's manual for exact instructions for commands, but I
need to know what to code first.
The app will consist of:
-a tree directory structure where I can create groups.
-There will be a basic text editor where I input all my data,
basic text formatting options (font, bullets etc) would be a bonus.
-A search function
-Finally it will ideally allow multiple client apps write to
a central database file over a network
Can anyone suggest how I should approach such a project?
Or are there any tutorials / source files which demonstrate
each bullet point?
thanks.

Hey jono,
I'm new too. But I think I might know the right components.
If you google any of these + flex 3 you should get some
decent documentation
tree - advanced dataGrid component
basic text editor - rich text editor component
search function - well, you're gonna need to read up on
arrays, and arraycollection. Once you get that stuff working, you
can write up a function to search for a string in an array.
network functionality - HTTPService, you can dump the
datagrid into a database, and have it load the database when you
open up the application.
Give these things a shot, tutorials / sources will come with
the google searches.

I need help switching back to iPhoto

In February of this year I switched from iPhoto to Aperture for very specific reasons. My laptop's hard drive was running out of space, as it was housing my photo library that was quickly approaching 25,000 photos and pushing about 30 Gigabytes, and I wanted to take advantage of Aperture's ability to store photo masters on an external drive.
So why switch back? When I described why I had switched and my experiences doing so back in February I had said that I ran into many problems all of which I was able to solve save two:
"The two things I have yet to solve, which are rather large things: 1) Spotlight can no longer find my photos since switching to [edit: from] iPhoto. I am really not sure where to start with fixing this so I think I’m just going to have to ask someone. 2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'. When I try to access the keywords that are “below” iPhoto Aperture freezes. Perhaps I have too many keywords (I do have an awful lot). I’m not sure how to solve this one yet either. Maybe there is a raw .plist file that I can manually edit (and I am willing to do so)." -- Me.
After using Aperture for the past 3+ months I've yet to resolve either of these issues. Recently there was an update to Aperture from Apple that, according to the documentation for the update, was supposed to help resolve my second issue with having too many keywords for Aperture to handle - but it hasn't helped much. So since switching to Aperture I've not tagged more than maybe fifty photos, which is discouraging because I know that once I switch back to iPhoto I'm going to be busy tagging photos again.
So I suppose you could say I'm switching back for two main reasons. First, I want it to be much easier to tag my photos since that is probably the single most important thing to me and the experience with iPhoto and Keyword Manager ( http://www.bullstorm.se/KeywordManager.php ) is far superior to that of using keywords in Aperture. Second, I want my photos to start showing up in Spotlight searches again. I'm more than willing to deal with the caveat, albeit a rather large one, that I won't have my photos with me wherever I go anywhere but that they'll forever reside on my firewire drive.
What I need help with...
When I open iPhoto I see all of the previews for the photos that I had the day I switched to Aperture. However, the originals have been moved by Aperture onto my firewire drive - so when I click on each photo all I get is a ( ! ) symbol. The previews still reference a file that does not exist yet the iPhoto database still retains all of the relevant metadata (date/time, keywords, comments, etc) that I had worked so hard to put into iPhoto. I need to retain this information and somehow get the originals back into place so that iPhoto sees them again.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be. 2) Move the entire library to my external firewire drive. 3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
Since I have Aperture store my photos by date - importing only the images that I've imported into Aperture should be a piece of cake. I do not need to retain any metadata from Aperture since I've only tagged a few photos in Aperture and all of the other information I may need should be on the original file (like date taken, etc.). I know I'm going to lose a lot of edits that I've done like cropping, rotating, color balancing, red-eye reduction, etc. but I'm more than willing to lose all of that if it means that I can pick up where I left off and get back into the swing of things in iPhoto.
I've Googled like crazy and haven't found someone doing exactly what I'm trying to accomplish so any help with my current situation is greatly appreciated. I've also posted this on my blog http://cdevroe.com/notes/back-to-iphoto/

cvdevroe
2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'.
Bear with me, my terminology may not be right. I'm heading in the opposite direction, and one of the advantages i see to Aperture is that I've got the same advantages in Keyword management as I have with KM in iPhoto.
Have you tried re-organising them using the control bar: Below the thumbs there's a drop down menu, by default it shows Photo Descriptors. Click on it and Select 'Edit Buttons'. You can merrily re-organise your Keywords in this window, and even have your changes reflected in live in the HUD.
As to the Spotlight searching, I'm afraid someone else will need to help on that one. Personally - and it's a regular on the iPhoto forums - I've never had much luck getting Spotlight to search within iPhoto for keywords, apart, of course, from using the search window in the iPhoto Window. I suspect a system-based search of iPhoto keywords is simply not possible.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be.
That will work, but they'll need to be exactly as they were.
2) Move the entire library to my external firewire drive.
Easily done, after you've copied it over launch iPhoto holding down the option (or alt) key and choose 'Locate'. Navigate to the new location and that''ll be your default iPhoto Library Folder thereafter.
3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
That should work too.
But the key is, can you return the iPhoto Library Folder exactly as it was, otherwise you'll need to create and populate a new library - and that will inevitable mean losing your keywords in iPhoto too.
FWIW, I need to keep iPhoto going for others in the household who are daunted by Aperture. My solution is a referenced library pointing towards the iPhoto Library Folder / Originals folder.
Regards
TD

I need help with a VB Application

I need help with building an application and I am on a tight deadline. Below I have included the specifics for what I need the application to do as well as the code that I have completed so far. I am having trouble getting the data input into
the text fields to save to a .txt file. Also, I need validation to ensure that the values entered into the text fields coincide with the field type. I am new to VB so please be gentle. Any help would be appreciated. Thanx
•I need to use the OpenFileDialog and SaveFileDialog in my application.
•Also, I need to use a structure.
1. The application needs to prompt the user to enter the file name on Form_Load.
2. Also, the app needs to use the AppendText method to write the Employee Data to the text file. My project should allow me to write multiple Employee Data to the same text file. The data should be written to the text file in the following format (comma
delimited)
FirstName, MiddleName, LastName, EmployeeNumber, Department, Telephone, Extension, Email
3. The Department dropdown menu DropDownStyle property should be set so that the user cannot enter inputs that are not in the menu.
Public Class Form1
Dim filename As String
Dim oFile As System.IO.File
Dim oWrite As System.IO.StreamWriter
Dim openFileDialog1 As New OpenFileDialog()
Dim fileLocation As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
openFileDialog1.InitialDirectory = "c:\"
openFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 1
openFileDialog1.RestoreDirectory = True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
fileLocation = openFileDialog1.FileName
End If
'filename = InputBox("Enter output file name")
'oWrite = oFile.CreateText(filename)
cobDepartment.Items.Add("Accounting")
cobDepartment.Items.Add("Administration")
cobDepartment.Items.Add("Marketing")
cobDepartment.Items.Add("MIS")
cobDepartment.Items.Add("Sales")
End Sub
Private Sub btnSave_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
'oWrite.WriteLine("Write e file")
oWrite.WriteLine("{0,10}{1,10}{2,10}{3,10}{4,10}{5,10}{6,10}{7,10}", txtFirstname.Text, txtMiddlename.Text, txtLastname.Text, txtEmployee.Text, cobDepartment.SelectedText, txtTelephone.Text, txtExtension.Text, txtEmail.Text)
oWrite.WriteLine()
End Sub
Private Sub btnExit_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
oWrite.Close()
End
End Sub
Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
txtFirstname.Text = ""
txtMiddlename.Text = ""
txtLastname.Text = ""
txtEmployee.Text = ""
txtTelephone.Text = ""
txtExtension.Text = ""
txtEmail.Text = ""
cobDepartment.SelectedText = ""
End Sub
End Class

Hi Mikey81,
Your issue is about VB programming, so Visual Basic forum is a better forum for your case. I moved this thread there,
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I need help with illustrator 10

I need help with illustrator 10, I have artwork I need to finish in it and it keep kicking me off.
I have added transparency, using SVG effects, a lot more detail and that is when it started kicking me off. I just added 2 gb of ram thinking it was ram I needed but it keeps kicking me off.
I think there is something I need to change in how I save it???
I have a mini mac, 10.5.8
The screen also turns white while I am working and when it does kick me off it says there is an error.I know I am behind the times but I am just trying to get this deadline done and be able to update my computer and such in a few months. Help!

I have very simple artwork and when I add any textures or transparency or
any type of detail from SVG effects it will not let me copy it and paste or
when I do try to move it everything turns white or it just kicks me off.
Then I cannot get back onto illustrator. It takes a very long time to save
it or move things. This has not happened before. I have been designing
for 25 years and am self taught. I can get on my simple designs. I am
saving my artwork as AI document. I just have to finish the designs and
put them into dropbox. I do not need to print. I did add 2 GB of ram
thinking the extra memory would help. I think I need to turn something off
and turn something on. There is an error window that comes up the says the
application illustrator has quit unexpectedly. I am at a dead end on what
to do!

Need help on Adhoc Request functionality in PI

Hi Experts ,
Need help on the design approach . How can PI handles if Sender System prefers to send an Adhoc Request(Outbound) to PI .
Here is the complete requirement .
" An Adhoc Request is send to PI from the Legacy Sender System (Whenever Legacy system has Planned and unplanned shutdowns) . Legacy system uses web client based request ( HTTP ) to PI . As soon as the http request is received to PI . PI needs provide back the information to Legacy System "
Note : PI needs to provide the Requested data to Legacy system from the External Shared folders . (Data content is stored in an .xml format in shared folders)
I can see file adapter is one of the option which i can choose to connect to the external folders .
How can i achieve the Adhoc Request functionality ? Needs advice and suggestions on this please ?
Regards,
Khan

Hi Aziz - I don't think you should worry about "Ad hoc" here. It's nothing but a specific request from your sender application.
Please refer to the scenario #8 SOAP- File and i assume it would be the same case with your interface.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f96dbf-adca-3010-ffb5-daf2d1f0e276?QuickLink=index&…

Need help in creating Knowledge module to aggregrate source data.

Hi Guys,
I am new to ODI and I am trying to create a Knowledge module. I went through the docs relating to Knowledge modules and APIs, so hopefully did my home work, I still find writing KM to be very challenging for the scenario, I have.
The following is my scenario.
I have two tables Employee and Department. Employee is the source and Department is the target. I need to sum salaries of all the employees belonging to a given department. And then insert the data into Department table.
Structure of the tables is as follows:
Employee(Source Table name)
Employee_id
Salary
Dept_id
Department(Target table name)
id
total_salary
Both target and source are on the same server. The user of this KM would drag and drop both source and target tables into interface and then map the columns. In the above case, Dept_id to id and salary to total_salary and then use this IKM. And off-course the user would indicate what columns would be aggregated on and what would be used as group by. One way to tag that, would be to use those UD1,UD2 tags in target column properties. (If there is another way to tag a column to indicate a column to be used for aggregation and a given column to be used in group by during run time in source, please let me know)
I choose to write IKM for this.
The challenging part is that I am having hard time figuring out the columns of source table as to what column should be used as group by and what column to be aggregated on. Since the tags are defined on Target columns and not on source columns. So have to figure out the appropriate columns through the mapping at run time.
The following is what I am planning to write in (Insert new rows ) command. And the part where I need help is how to compose select statement.
iinsert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
Select
source.column1,sum(source.column2) from <%=odiRef.getFrom()%> GROUP BY source.column1
Thanks.

I did try as per your advise.
Filter is not making a difference. Irrespective of me adding a filter or not, ODI generates a sql that has GROUP BY , just by looking at SUM(SALARY).
Coming back to the main issue, this does do what I wanted to do. I was planning on using a custom KM. But I guess, this is as good as custom KM, since the work done in an interface (assuming a custom KM exists) by going through either route is the same, so I can live with this approach.
Thanks for the help.

Need help in creating tabbed webpart in sharepoint + no of tabs in webpart should be dynamic.

Need help in creating tabbed webpart in sharepoint and no of tabs in webpart should be dynamic.
under each tab i should be able to add multiple webparts(each tab will have webpart zone)
programatically i need to generate tabs and insert webpart zones under each tab.
Let me know how can i achieve this.
i followed below article.
http://msdn.microsoft.com/en-us/library/jj573263%28v=office.14%29.aspx
but in this article the tabs and webparts are static and we need to close each webpart .
Kindly let me know the approach.thanks in advance

the Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord

Need help - deadline approaching

Similar Messages

Maybe you are looking for