Need help deciding between i5 and i7 X220

I am trying to decide between i5 and i7.  The extra money doesn't bother me and I know the i7 isn't that much faster than the i5.
There are problems with the mSata drives for those with i7/USB3 machines but I don't plan on using mSata yet.
Some people have had problems with their USB 3.0 ports not providing full speed.   As an aside, you can get newer USB 3.0 drivers from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19880&keyword=usb+3.0&lang=eng .  There is also new NEC/Renesas firmware at http://www.station-drivers.com/page/nec.htm.  I have used these on my desktop with an add-on NEC/Renesas-based USB 3.0 adapter with success. 
So the question is, are i7 owners happy with their choice or should i7 be avoided for now?
Also, any i7 owners have their USB 3.0 working fine with a USB 3.0 hard drive?
Are there any other issues such as heat or fan noise that are worse on the i7?

Also, will the batty life be affected by the i7/i5 choice?

Similar Messages

  • Need help deciding between AI and EPS for use in XML

    I am using a non-Adobe XML editing package/publishing engine. The vendor who set it up suggested that we use native AI files for editing and creating images, then export EPS files for use in the XML (it doesn't work with AI). The challenge is to keep the AI and EPS files in sync throughout the revision process.
    My question is around whether we really need to keep the AI files or not. What are the actual elements we would be missing if we skipped the AI and just used the EPS files? Are EPS files less editable? I plan to test this, but I'm looking for issues to keep an eye on through testing.

    I'm not sure whether PDF would be compatible, but I would not be surprised if it was not. If I create an image in Illustrator and save it as a PDF, will I be able to edit the PDF like an AI later? More importantly, is there anything from the AI format that would be missing in the PDF file?
    Bottom line is, I don't want to have to store two files for each figure, but I don't want to compromise the editability or rendering quality.
    Thanks for the quick answer!

  • Need help deciding between 2 slr cameras

    I would love some help in deciding between 2 cameras, canon digital rebel xt and nikon d50. Since both seem to be rated equally, I want to base my decision on which one is easier to work with in iphoto or at least adobe elements 2 or 3. I have heard that raw files are proprietary and I don't even know if either will work on my mac. (do not have usb2 only usb1).
    Especially since I do not have any experience with any digital camera, I would appreciate any suggestions.
    thank you

    Thank you all for responding. I have been away from my computer and again I am not receiving e-mails letting me know if someone has replied.
    To answer a few questions; I will mainly be doing iDVD and iMovie slideshows and a few good prints (hopefully). I will be mainly taking photos of family and especially a new baby. After some research I was told that slrs take faster pixs, therefore more suitable for a moving baby, especially if shooting in a continuous mode. I also do not want a long delay before I take another pix so I can capture that special baby expression. I also want sharp pictures with realistic colors and enough pixels to crop. Since I do edit, crop ... I thought RAW might be a better choice than jpgs, since I understand that jpgs lose a lot of quality when touched up.
    Since I did not know anyone answered me, I bought the Canon. I am somewhat disappointed. I do not know if it is my fault or the cameras. I went to about 7 stores and asked the salespeople their opinion and all varied. Quite a few told me I would get sharper photos with the Nikon and maybe they were right. My Canon shoots pretty good color (although a little on the orange side, especially skin colors), BUT THEY ARE ALL SOFT, as one saleman warned me about. I am very disappointed since a friend's Nikon coolpix 5200 has sharper images than my canon at a third of the price.
    I now have this dilemna in that I have till Sunday to exchange it for a Nikon, but I am afraid that I might be exchanging one problem for another, or that the softness is caused by me regardless which camera I use. In that case I prefer the canon because it is lighter.
    I also discovered that Minolta makes a camera with anti-shake that is in the same price range. Maybe that would solve my problem, however it is the heaviest of all 3, but I would be willing to buy it if the anti-shake gives a sharper photo. I want these photos to eventually look good on a HD television.

  • Hi, I need help deciding between 2 notebooks

    I have an Asus g1s which I bought from bestbuy 2 years back. I'm going to get it replaced soon and was trying to decide between a couple models. I really want a future proof laptop for gaming.
    here they are:
    Alienware M17x
    ntel® Core™2 Quad processor Q9000 2.0Ghz;
    4GB DDR3 SDRAM;
    DL DVD±RW/CD-RW drive;
    17" widescreen WXGA+ 1440x900;
    500GB hd 7200 rpm;
    Dual Nvidia GeForce GTX 260M graphics;
    PRICE:2,299.99
    Asus G72Gx
    Intel® Core™2 Quad processor Q9000 2.0Ghz;
    6GB DDR2 memory;
    DL DVD±RW/CD-RW drive;
    17.3" widescreen LED-backlit LCD 1600x900;
    640GB hard drive (320GB x 2; 7200 rpm);
    NVIDIA GeForce GTX 260M graphics;
    PRICE:1,299.99
    So as you can see the Alienware is a thousand bucks more and the only thing better about it is the gpu. The screen, the hd are a bit worse but I dont care about the tiny difference. I can't really tell which ones ram is better so what do you guys think?
    Is it really worth paying 1000$ more for dual gpus?
    (please feel free to ask me any questions)

    Personally, I would never get a laptop for gaming, unless it's an absolute must for some reason. You get a lot more for your money with a desktop system, heat is much less of an issue as well. Everyone I know with a gaming  laptop can't use it on a flat surface and either have to have a cooling mat or prop the laptop up to keep it from overheating.
    However, if you are going to get a gaming laptop I would go for one of the Core i7 (Nehalem) based models instead of Core 2 duo.
    Computers are NOT appliances, they MUST be maintained! Educate yourself on how to do this and save yourself headaches, repair bills, and lost data!

  • Need help deciding between two different Zen products [micro vs ... micr

    Hey all,
    Just bought a black zen micro last Wednesday and am loving it. Bought it from Best Buy and splurged on the extra protection plan. Unfortunatlly, after a trip to Fry's today, I'm questioning my impulse buy.
    At Fry's they have two different box sets of Zen Micros. One small one, like the one I got at Best Buy, with the player/battery, headphones, usb cable and smooth little pouch. But they also had a larger box with player/battery, headphones, usb cable, smooth little pouch AND an AC charger (and I'm not sure, but possibly a second battery?). I am assuming that this large box with more items (but still the same $99 price) is an older box. What I'm wondering is if there is any difference between the players in the two boxes. If there is not a difference, then I'm going back to Best Buy to get a refund and get one of the boxes at Fry's that has the charger with it (a much needed accessory for my uses). Of course, if the players do differ, I would have to find out in what way and weigh my option to keep what I have or return it and base a decision on that. That, of course, is what prompted this post.
    I know some players just can't help but be deffecti've, does this older box contain a series with a higher rate of returns? Does it look different (I really like the way the back lighting looks on mine)? Anyone have experience with one of the older boxed sets and one of the newer ones (bought one, then another for S.O.)?
    I'm already leaning towards return, but I just wanted to check with other creative users before I made my final decision.
    Thanks,
    -Jonathan

    There is no difference in the operation of the players. The very early Micros had the word "BACK" on the return button, the newer version just has a left pointing arrow. Supposedly, the newest units have a revision to the headphone jack, but there is no way of telling if you have the better or worse jack. The large box will also have the holder with the belt clip and stand. The Limited Edition has the extra battery, and is clearly marked with a sticker on the front of the box that says "Limited Edition FREE Extra Battery for 24 Hour Playtime. Some people say that the backlighting is different with the newer units, I dont know. The large box IS the older retail version. Hope this helps you.

  • Need help deciding between iMac or Display

    I'm hoping some of you mac pros can help me with some advice. A few months ago I made the switch and bought a macbook and realised how great it was for photography, but am now wishing I had a larger screen. I can't decide if I should keep the macbook and get a display to hook it up to, or sell the macbook and buy a new imac. If anyone with either of these could help me out with some pros and cons I would be most grateful !!!

    Hi LilacRose
    If you bought the Macbook for portability then buy a screen, if possible go to a dealer and take you Macbook to try some out.
    You probably will need at least a 20" so consider if you have permanent space for presumably an iMac (the keyboard will store under the screen on the stand) or the screen.
    It comes down to what other things you want to do with the machine, for instance if you want take it to show friends or family photos you have, then maybe keep the Macbook and have the benefit of the big screen for editing etc.
    Remember that although Macs hold their value you will still lose some money possibly.
    chris
    iMac 20" Intel Core Duo 2GB RAM   Mac OS X (10.4.8)   G3 600 iBook 640MB OS X (10.2.8) Lacie d2 60GB & 250GB Firewire Windows XP

  • Need help deciding between MacBook Pros...

    I have recently decided to switch to the MacSide and I narrowed my quest down to one of the 15" MacBook Pros.
    I will be editing for stop motion videos mostly. I will be using Final Cut Express. I imagine I will want to have FCE, garageband, iChat, and Safari all open at once. (I tend to multitask) I am unsure if the slight change in processor will make the $500 difference... or a big enough difference for the money. The 2.66GHz model also has a slightly better graphics card and 4GB of ram by default.
    Has anyone been in a similar situation in which they can share their thoughts?
    Thanks!
    ( I realized I put this in the incorrect category, so I am reposting.)

    i say if you can afford it do it! "go big or go home"
    i've had my powerbook g4 for about 5 years now, and it's running fine, a little slow! Sure, i know an upgrade is needed soon (im also running tiger). the macbook is a lot faster then my powerbook, n im runnin adobe suite and / or logic! but the main thing my old computer still rocks a little slower but runs fine!
    u could also invest in apple care ($350 us)!
    as for the graphic card, mine is older n crapier but it's fine, and i'm mostly doing visual stuff.
    so ya if you got the extra 500 do it, if not or u don't think its at necessory upgrade get apple care.
    Message was edited by: icahayes

  • Help deciding between BPM and Business Workflow

    Hi All,
    We are in the phase of deciding which tool to use for SAP Application systems from Workflow and Business Rules Engine Point of view.
    We recommended SAP Business Workflow + BRF+ for that.
    But SAP Business Workflow is not having monitoring UI as good as SAP BPM.
    So we are planning to propose the solution using SAP BPM instead of SAP Workflow.
    Our main requirement is HR Org structure data fetching and it is achievable with SAP BPM what I have studied so far.
    My question to the experts is whether SAP BPM can be integrated with SAP BRF+?
    Thanks in advance
    Message was edited by: Gareth Ryan - please don't use Urgent in your posts and try to use meaningful titles.

    Check out the following article, which provides a good overview of both solutions and gives guidance when to use what:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0bf9a3a-c607-2f10-3f82-cdeff15b7ce4?QuickLink=index&…
    The biggest difference (besides the underlying technology stack) is that by modeling processes in BPMN, business users gain transparency and become more involved in BPM projects, leading to better results.
    btw, SAP BPM is in the market for 5 years now and has more than one thousand productive customers.

  • MacBook Pro smell and need help deciding on which MacBook Pro to buy

    So I bought a 17-inch MacBook Pro from my brother in August of 2009. He bought it in March of 2008. A couple days ago I noticed that my MacBook Pro has been releasing a really bad smell almost as if burning plastic. But the smell isn't that bad. What could be wrong with my MacBook Pro? I'm getting a New 15 or 13-inch MacBook Pro in June so idk if I should just not worry about it? And I need help deciding if I should get a high end 13-inch MacBook Pro or a low end 15-inch MacBook Pro?

    What could be wrong with my MacBook Pro?
    Take your computer to an Apple Store. The staff will be able to check as to the cause of the smell.
    I'm getting a New 15 or 13-inch MacBook Pro in June so idk if I should just not worry about it? And I need help deciding if I should get a high end 13-inch MacBook Pro or a low end 15-inch MacBook Pro?
    Why not ask in the MacBook Pro (Late 2008 and 2009) forum area?

  • I need help importing navigation bars and rollover buttons from fireworks?

    I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
    Thanks

    In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons. 
    #1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing.  After 2-3 times of this, it gets old in a hurry.
    #2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
    #3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
    That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
    Nancy O.

  • I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

    I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
    Can you help? thank

    revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • HELP  Deciding between Windows laptops and OS X MacBook Pro!

    I'm going to college this coming fall and am in the market for a new laptop to bring with me. I've been debating between PC laptops and Apple laptops for months now. This all started with the release of the MBP and its Intel Duo processor. In short, the new MBP's intrigue me.
    So, I ask for help with deciding between the two. I'm very used to Windows XP; I have a Dell desktop and a Sony Vaio laptop. I do know the basics of
    OS X because we use them at my high school.
    My main question is, Why should I make the jump from Windows to Apple/
    OS X?
    Also, I have looked at several other notebooks, comparing features with prices. The 15.4" MBP is running at $2000. For the same price, I can get a similar Windows laptop with more technical features (more GB hard drive/more RAM).
    MAC-80GB HD ; 512MB DDR2 RAM
    SONY NOTEBOOK-100GB HD ; 1GB DDR2 RAM
    Is the Apple notebook slower? I just have many questions, and I hope someone is able to answer at least a few and "teach me" the Apple way. Any help is appreciated!!
      Windows XP  

    Hi, eightnotes. welcome to the forum.
    In my opinion, there are several reasons why you should make the jump.
    The first and biggest reason is the user experience, i.e. ease of use and low-maintenance OS. You're familiar with Windows, so you know you almost need to have a degree in computer science to properly secure, protect and maintain a Windows pc against internet threats. The Mac OS is not so threatened, so you will spend less time and energy worrying about it, securing it, and fixing it when it breaks.
    Another reason is the way that Mac OS X is well integrated to fit the hardware that runs it. I've always believed that one of Windows biggest weaknesses is the fact that computer manufacturers must properly engineer their hardware to conform to the requirements of Windows OS. Of course, some are better than others, and God help you if you have a problem. "Who ya gonna call?". If it's OS X on Macintosh, you're gonna call Apple.
    And finally, I think Apple provides the best suite of software that a consumer can get for everyday use. iLife (with iPhoto, iTunes, iMovie, iDVD and Garage Band) is simply the best at digital photos, music and video. If you need more than that, add iWork or MS Office for the writing and publishing... add other third party apps for other things and you're still using excellent, solid apps.
    There you go! Three very good reasons (IMHO) why you should make the jump.
    And here's one more for good measure. The ability to run Windows XP natively (and maybe Vista next year) on the newest Intel-based Macs. If you make the switch and just can't seem to tear yourself away from the dark side that is Windows, then you can always visit it from the comfort of your couch and your lap with your new MacBook Pro and Boot Camp.
    So, even though the price may seem greater for the MacBook Pro, once you factor in all the advantages and factor out the hassles, the MacBook Pro is the way to go.
    I hope this is helpful.
    Regards... d.i.

  • Need help with ASA 5512 and SQL port between DMZ and inside

    Hello everyone,
    Inside is on gigabitEthernet0/1 ip 192.9.200.254
    I have a dmz on gigabitEthernet2 ip 192.168.100.254
    I need to pass port 443 from outside to dmz ip 192.168.100.80 and open port 1433 from 192.168.100.80 to the inside network. 
    I believe this will work for port 443:
    object network dmz
    subnet 192.168.100.0 255.255.255.0
    object network webserver
    host 192.168.100.80
    object network webserver
    nat (dmz,outside) static interface service tcp 443 443
    access-list Outside_access_in extended permit tcp any object webserver eq 443
    access-group Outside_access_in in interface Outside
    However...How would I open only port 1433 from dmz to inside?
    At the bottom of this message is my config if it helps.
    Thanks,
    John Clausen
    Config:
    : Saved
    ASA Version 9.1(2) 
    hostname ciscoasa-gcs
    domain-name router.local
    enable password f4yhsdf.4sadf977 encrypted
    passwd f4yhsdf.4sadf977 encrypted
    names
    ip local pool vpnpool 192.168.201.10-192.168.201.50
    interface GigabitEthernet0/0
     nameif outside
     security-level 0
     ip address 123.222.222.212 255.255.255.224 
    interface GigabitEthernet0/1
     nameif inside
     security-level 100
     ip address 192.9.200.254 255.255.255.0 
    interface GigabitEthernet0/2
     nameif dmz
     security-level 100
     ip address 192.168.100.254 255.255.255.0 
    interface GigabitEthernet0/3
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/4
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/5
     shutdown
     no nameif
     no security-level
     no ip address
    interface Management0/0
     management-only
     nameif management
     security-level 100
     ip address 192.168.1.1 255.255.255.0 
    ftp mode passive
    dns server-group DefaultDNS
     domain-name router.local
    object network inside-subnet
     subnet 192.9.200.0 255.255.255.0
    object network netmotion
     host 192.9.200.6
    object network inside-network
     subnet 192.9.200.0 255.255.255.0
    object network vpnpool
     subnet 192.168.201.0 255.255.255.192
    object network NETWORK_OBJ_192.168.201.0_26
     subnet 192.168.201.0 255.255.255.192
    object network NETWORK_OBJ_192.9.200.0_24
     subnet 192.9.200.0 255.255.255.0
    access-list outside_access_in extended permit icmp any4 any4 log disable 
    access-list Outside_access_in extended permit udp any object netmotion eq 5020 
    access-list split standard permit 192.9.200.0 255.255.255.0 
    access-list VPNT_splitTunnelAcl standard permit 192.9.200.0 255.255.255.0 
    pager lines 24
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    mtu management 1500
    mtu dmz 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside) source static inside-network inside-network destination static vpnpool vpnpool
    nat (inside,outside) source static NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24 destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
    object network netmotion
     nat (inside,outside) static interface service udp 5020 5020 
    nat (inside,outside) after-auto source dynamic any interface
    access-group Outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 123.222.222.1 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 management
    http 192.9.200.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac 
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac 
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac 
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac 
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac 
    crypto ipsec security-association pmtu-aging infinite
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ca trustpool policy
    crypto ikev1 enable outside
    crypto ikev1 policy 10
     authentication crack
     encryption aes-256
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 20
     authentication rsa-sig
     encryption aes-256
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 30
     authentication pre-share
     encryption aes-256
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 40
     authentication crack
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 50
     authentication rsa-sig
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 60
     authentication pre-share
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 70
     authentication crack
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 80
     authentication rsa-sig
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 90
     authentication pre-share
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 100
     authentication crack
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 110
     authentication rsa-sig
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 120
     authentication pre-share
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 130
     authentication crack
     encryption des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 140
     authentication rsa-sig
     encryption des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 150
     authentication pre-share
     encryption des
     hash sha
     group 2
     lifetime 86400
    telnet 192.9.200.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    dhcpd address 192.168.1.2-192.168.1.254 management
    dhcpd enable management
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ssl encryption aes128-sha1 3des-sha1
    webvpn
     enable outside
     anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2 regex "Windows NT"
     anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3 regex "Intel Mac OS X"
     anyconnect enable
     tunnel-group-list enable
    group-policy SSLVPN internal
    group-policy SSLVPN attributes
     dns-server value 192.9.200.13
     vpn-tunnel-protocol ssl-client 
     split-tunnel-policy tunnelspecified
     split-tunnel-network-list value split
     default-domain value router.local
    group-policy VPNT internal
    group-policy VPNT attributes
     dns-server value 192.9.200.13
     vpn-tunnel-protocol ikev1 l2tp-ipsec 
     split-tunnel-policy tunnelspecified
    split-tunnel-network-list value VPNT_splitTunnelAcl
     default-domain value router.local
    username grimesvpn password 7.wersfhyt encrypted
    username grimesvpn attributes
     service-type remote-access
    tunnel-group SSLVPN type remote-access
    tunnel-group SSLVPN general-attributes
     address-pool vpnpool
     default-group-policy SSLVPN
    tunnel-group SSLVPN webvpn-attributes
     group-alias SSLVPN enable
    tunnel-group VPNT type remote-access
    tunnel-group VPNT general-attributes
     address-pool vpnpool
     default-group-policy VPNT
    tunnel-group VPNT ipsec-attributes
     ikev1 pre-shared-key *****
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map 
      inspect ftp 
      inspect h323 h225 
      inspect h323 ras 
      inspect rsh 
      inspect rtsp 
      inspect esmtp 
      inspect sqlnet 
      inspect skinny  
      inspect sunrpc 
      inspect xdmcp 
      inspect sip  
      inspect netbios 
      inspect tftp 
      inspect ip-options 
      inspect icmp 
    service-policy global_policy global
    prompt hostname context 
    no call-home reporting anonymous
    Cryptochecksum:36271b5a1b9382621e14c3aa635e2fbb
    : end

    Hi Vibor. Apologies if my comment was misunderstood.  What I meant to say was that the security level of the dmz interface should probably be less than 100. 
    And therefore traffic could be controlled between DMZ and inside networks. 
    As per thr security level on the DMZ interface. ....... that command is correct. :-)

Maybe you are looking for