Need help: Dimensional column has assoc with more than 1 level
Hi,
I am trying to have multiple drill paths for a single dimension. For example, the Date dimension should be navigable by the following hierarchies:
DateDimension
+---- Calendar Year
......---- Calendar Quarter
............--- Calendar Month
..................-- Day
+---- Calendar Year
......---- Day
So, in other words, in Answers I should be able to add 'Calendar Year' to my report, display results, and then click down the path Calendar Year -> Calendar Quarter -> Calendar Month -> Day OR Calendar Year -> Day.
However, when I model this in the Admin tool, it allows it, but then I add the column in Answers and get a runtime error:
+[nQSError: 14064] Dimensional column [column name] has associations with more than one level+
This is possible in BO and other tools. If it is not possible in Oracle BI EE, then one alternative would be to have two separate versions of 'Calendar Year' added to the report in Answers, each with their own drill path.
Any ideas???
Thanks for any help you can provide.
Matt Warden
Balanced Insight, Inc.
Hi,
You try this one .
Create the Hierarchy Year --> Quarter--->Month-->Week-->Day in rpd as usual manner .But in Year report use navigate option in column properties add Quarterly Report (Caption it as 'Quarter')and Day level report(Caption it as 'Day') in navigate option.So when you click on Year column it i will prompt to select either Quarter or Day and when u select Quarter u will have normal drill functionality from Quarter to Month to Week and Day.Hope this helps you.
Thanks.
Similar Messages
-
Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2 -
CS3, exporting to tape has problems with more than two video tracks
Well, not quite, but that's the best I could do in the subject line.
I record multiple performances and edit scenes from among them. At times, this results in three or four video tracks on the timeline at once. Each track is 100% opaque, so only the top Enabled track shows. By Enabling or Disabling the various tracks, I can get the sequence I want.
And the sequence plays back fine in the Monitor window. But when I try to Export it to tape, as soon as I get to such a place, the image hiccups around the same small number of frames (think of the video equivalent of an audio sample).
It's not the number of video tracks. I can add Image Mattes on a third video track operating on the two below. I can add any number of titles on different tracks. They need to render, but then they export to tape perfectly.
What's different about three or more .avi tracks, even when they are Disabled?Thanks, Jim, for your reply to this and other threads. (Warning: I had two other questions — been saving them up for awhile — that I'll post shortly. It was too late already last night).
> AVIs need to be "read" from the hard drive and can create a bottleneck depending on certain conditions.
Agreed, but unless there is partial opacity in the top Enabled track, only one track at a time is exported. And in the cases I cited, the unused clips were Disabled. No need for Premiere to read them at all. I assume the state of each clip is part of the Project.
Ah well, I was only curious if I was missing something obvious, or perhaps it was a known bug that would be addressed. Apparently the additional resources needed for tape export push Premiere over some edge. Remember, I can watch (even Preview) the sequence in the Monitor window without seeing this artifact.
> Render before exporting to tape is SOP. Go with that.
Naturally. And I do. And if I didn't, Premiere would do it for me automatically before opening the Export to Tape window.
Thanks again. On to the next thread. -
Need help on downloading apps that are more than 20MB in size
I can only download apps less than 20MB in size. If i want to download others that are larger than 20MB, i have to use wifi... But after I connected my phone to my home network and clicked on the app, I am still unable to download it... The only message that pops up is to prompt me to connect to wifi.... but I thought I have connected it already??! So now the apps are grey in colour and stuck at the "loading" stage... Does anyone know how I can solve this problem? Thanks.
Hello, thanks for your answer... yups you are right, i went to the app store on the phone and the downloads started again.
I have one that is 22MB, one 124MB and one 36MB.... but i have tried to download those which are above 40MB but they can work... I don't know what happened to thes 3 apps...
Oh my, I have just started using iphone for 2weeks and i dun suppose my phone is out of space already?!! currently there are less than 40apps...
And the problem is i can't delete these apps that are stuck? when i press and hold, there is no "cross" at the top left hand corner... and i tried to uncheck the boxes in itunes to "un-sync" them.... but the apps remain greyed out on my phone... do you have any other ways to delete them?
Thanks alot! -
How to generate a certificate request with more than one OU?
We're using Sun Java System Web Server 6.1 SP4. The Corp. has it's own CA and organize their certificates in a hierarchical rule with more then one organization unit (OU) in a chain.
So what we need is generate a certificate requeste with more than one OU, but the Web Server wizard has only one text field for it. We've already tried to fill in this field the complete chain of OUs like "ou=orgX, ou=deptY, ou=secZ" and didn't work either.
Thank's in advance,
Jeff!Do you have tried with the command line "certutil" ?
#<SERVER-ROOT>/bin/https/admin/bin/certutil -
I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.) -
Report with more than 30 columns
XML Pub Gurus,
I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
Thanks in advance
Ram GWhat do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
1. Create your query with as many columns as you want.
2. Don't create a layout at all
3. Launch Excel Analyzer.
4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
5. Upload your excel Analyzer template back to the server
This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel. -
Attachment with more than 255 columns
Hi together,
i want to send a mail in background with an attachment with more than 255 columns through the function module SO_DOCUMENT_SEND_API1 . The required content-structure of this function module have 255 columns......
I try it also with the function module SO_DOCUMENT_REPOSITORY_MANAGER with the method 'SEND'
but i can't suppress the popup of this function module.
Have anybody an solution for me ?
br
Markus
Edited by: Markus Garyant on Aug 21, 2008 3:39 PMAttachement table has a strucutre SOLISTI1 which can contain only 255 characters BUT you can use the CL_ABAP_CHAR_UTILITIES=>CR_LF for the new line and CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB for the column separater.
You need to concatenate this Separters in the attachment table.
Check out this example:
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Regards,
Naimesh Patel -
Row chaining in table with more than 255 columns
Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahavuser10952094 wrote:
Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahavYesterday, I stated this on the forum "Tables with more than 255 columns will always have chained rows." My statement needs clarification. It was based on the following:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/schema.htm#i4383
"Oracle Database can only store 255 columns in a row piece. Thus, if you insert a row into a table that has 1000 columns, then the database creates 4 row pieces, typically chained over multiple blocks."
And this paraphrase from "Practical Oracle 8i":
V$SYSSTAT will show increasing values for CONTINUED ROW FETCH as table rows are read for tables containing more than 255 columns.
Related information may also be found here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c11schem.htm
"When a table has more than 255 columns, rows that have data after the 255th column are likely to be chained within the same block. This is called intra-block chaining. A chained row's pieces are chained together using the rowids of the pieces. With intra-block chaining, users receive all the data in the same block. If the row fits in the block, users do not see an effect in I/O performance, because no extra I/O operation is required to retrieve the rest of the row."
http://download.oracle.com/docs/html/B14340_01/data.htm
"For a table with several columns, the key question to consider is the (average) row length, not the number of columns. Having more than 255 columns in a table built with a smaller block size typically results in intrablock chaining.
Oracle stores multiple row pieces in the same block, but the overhead to maintain the column information is minimal as long as all row pieces fit in a single data block. If the rows don't fit in a single data block, you may consider using a larger database block size (or use multiple block sizes in the same database). "
Why not a test case?
Create a test table named T4 with 1000 columns.
With the table created, insert 1,000 rows into the table, populating the first 257 columns each with a random 3 byte string which should result in an average row length of about 771 bytes.
SPOOL C:\TESTME.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL255,
COL256,
COL257)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=1000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat are the results of the above?
Before the insert:
NAME VALUE
table fetch continue 166
After the insert:
NAME VALUE
table fetch continue 166
After the select:
NAME STATISTIC# VALUE
table fetch continue 252 332 Another test, this time with an average row length of about 12 bytes:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME2.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL256,
COL257,
COL999)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWith 100,000 rows each containing about 12 bytes, what should the 'table fetch continued row' statistic show?
Before the insert:
NAME VALUE
table fetch continue 332
After the insert:
NAME VALUE
table fetch continue 332
After the select:
NAME STATISTIC# VALUE
table fetch continue 252 33695The final test only inserts data into the first 4 columns:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME3.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL4)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat should the 'table fetch continued row' show?
Before the insert:
NAME VALUE
table fetch continue 33695
After the insert:
NAME VALUE
table fetch continue 33695
After the select:
NAME STATISTIC# VALUE
table fetch continue 252 33695 My statement "Tables with more than 255 columns will always have chained rows." needs to be clarified:
"Tables with more than 255 columns will always have chained rows +(row pieces)+ if a column beyond column 255 is used, but the 'table fetch continued row' statistic +may+ only increase in value if the remaining row pieces are found in a different block."
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Aug 5, 2009 9:52 AM
Paraphrase misspelled the view name "V$SYSSTAT", corrected a couple minor typos, and changed "will" to "may" in the closing paragraph as this appears to be the behavior based on the test case. -
Spool request with more than 255 columns
Hi,
Please let me know what formatting type has to be used to have spool output with more than 255 lines.
X_24_80_JP L ANY 00024 00080 ABAP list HR Japan: At least 24 rows by 80 columns
X_44_120 L ANY 00044 00120 ABAP/4 list: At least 44 rows by 120 columns
X_51_140_JP L ANY 00051 00140 ABAP list HR Japan: At least 51 rows by 140 columns
X_58_170 L ANY 00058 00170 ABAP/4 list: At least 58 rows by 170 columns
X_60_80_JP L ANY 00060 00080 ABAP list HR Japan: At least 60 rows by 80 columns
X_65_1024/4 L ANY 00065 01024 ABAP List: At Least 65 Lines 4*256=1024 Columns Four-Sided (Only for SAPlpd)
X_65_132 L ANY 00065 00132 ABAP list: At least 65 rows by 132 columns
X_65_132-2 L ANY 00065 00132 ABAP List: 2-column 65 characters 132 columns (only for SAPLPD from 4.15)
X_65_200 L ANY 00065 00200 ABAP list: at least 65 lines with 200 columns (not for all device types)
X_65_255 L ANY 00065 00255 ABAP/4 list: At least 65 rows with a maximum number of columns
X_65_256/2 L ANY 00065 00256 ABAP list: At least 65 lines 2*128=256 double columns (SAPLPD only)
X_65_512/2 L ANY 00065 00512 ABAP List: At least 65 Lines 2*256=512 Columns 2-sided (Only for SAPlpd)
X_65_80 L ANY 00065 00080 ABAP/4 list: At least 65 rows by 80 columns
X_65_80-2 L ANY 00065 00080 ABAP List: 2-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_65_80-4 L ANY 00065 00080 ABAP List: 4-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_90_120 L ANY 00090 00120 ABAP list: At least 90 rows by 120 columns
X_PAPER L ANY 00010 00010 ABAP/4 list: Default list formatting
X_PAPER_NT L ANY 00001 00001 ABAP/4 list: Obsolete (do not use)
X_POSTSCRIPT L ANY 00001 00001 Pre-prepared PostScript
X_SPOOLERR L ANY 00001 00001 ABAP list: Spooler problem report
X_TELEX L TELEX 00001 00001 Telex: 69 characters wide, only as many lines as supported by TTU
ZABC_SAP L ANY 00065 00550 LCM Report Page Type
I have created a custom Format Type with 65*550 (ZABC_SAP) , but still the output gets truncated in the spool.
In sp01 . For the spool request ... If it displayed in Graphical layoout ... Output is getting truncated but when we see in Raw format .. i can see the entire output. But it is not at all formatted.
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar BolisettyHello Tanuj,
You need to use a page format greater than 255 columns for sure. However still if it does not solve the issue then you may consider using the note 186603.
PS: I guess you are on a higher release than 4.6 C . For this release this note íIt has a text attachment for a report tat allows to display such spool requests.
Regards.
Ruchit. -
Table with more than 35 columns
Hello All.
How can one work with a table with more than 35 columns
on JDev 9.0.3.3?
My other question is related to this.
Setting Entities's Beans properties from a Session Bean
bought up the error, but when setting from inside the EJB,
the bug stays clear.
Is this right?
Thank youThank you all for reply.
Here's my problem:
I have an AS400/DB2 Database, a huge and an old one.
There is many COBOL Programs used to communicate with this DB.
My project is to transfer the database with the same structure and the same contents to a Linux/ORACLE System.
I will not remake the COBOL Programs. I will use the existing one on the Linux System.
So the tables of the new DB should be the same as the old one.
That’s why I can not make a relational DB. I have to make an exact migration.
Unfortunately I have some tables with more than 5000 COLUMNS.
Now my question is:
can I modify the parameters of the ORACE DB to make it accept Tables and Views with more than 1000 columns, If not, is it possible to make a PL/SQL Function that simulate a table, this function will insert/update/select data from many other small tables (<1000 columns). I want to say a method that make the ORACLE DB acting like if it has a table with a huge number of columns;
I know it's crazy but any idea please. -
General Scenario- Adding columns into a table with more than 100 million rows
I was asked/given a scenario, what issues do you encounter when you try to add new columns to a table with more than 200 million rows? How do you overcome those?
Thanks in advance.
svkFor such a large table, it is better to add the new column to the end of the table to avoid any performance impact, as RSingh suggested.
Also avoid to use any default on the newly created statement, or SQL Server will have to fill up 200 million fields with this default value. If you need one, add an empty column and update the column by using small batches (otherwise you lock up the whole
table). Add the default after all the rows have a value for the new column. -
Can I create a table with more than 40 columns ?
Hello,
I need to organize my work with a table and need about 66 columns. I am not very good with Numbers but I know a little bit of Pages. I cannot find a way to create a table with more than 40 columns... Is it hopeless ? (Pages '08 v. 3.0.3)
Thank you allIt's never too late to try to teach users that the Search feature is not only for helpers.
The number of columns allowed in Numbers is not a relevant value when the question is about Pages '08 tables.
I tried to copy a 256 columns Numbers table into a Pages '09 document.
I didn't got a table but values separated by TABs.
I tried to convert this text range in a table and got this clear message :
If I remember well, in Pages '08, the limit is 40 columns.
It seems that you are a specialist of inaccurate responses, but I'm not a moderator so I'm not allowed to urtge you to double check what you wrote before posting.
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:57:58
Please :
Search for questions similar to your own before submitting them to the community -
Create a logical column with more than one data source
I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388 -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts
-
Short Dump While Accessing RSA1 in BI7.0 with SP 21
Hi, The following short dump occurs, while Accessing RSA1 in BI7.0 Runtime Errors SYNTAX_ERROR Date and Time 26.10.2010 10:19:35 Short text Syntax error in program "CL_RSTRAN_STAT================CP ". What happened? Error in the ABAP Applic
-
Intercompany with Risk management
Hi SAP Prof, These is an issue with intercompany with multiple line items and each line item belongs to different company code... I have created intercompany sales order with multiple items(Each item belong to different Ccode) and i ha
-
How to set Bluetooth headset as a default answering device in iphone?
How to set Bluetooth headset as a default answering device in iphone?
-
Newbie w/i 60 days...need advise on dual OS and how to accomplish asap
Baltwo or anyone that can assist, You seem to give clear cut advise...can you help a complete newbie, less than 60 days with a 15.4 Mac ProBook, Core 2 Duo, Tiger OS X 10.4.10 I need to run dual OS systems most comfortable with Windows XP Professiona