Need help disassembling Blackbird case!
So I decided to take apart and paint my case, but I've ran into an issue. I have already taken off the doors, removed the power supply, and all that stuff. But I can't seem to lift off the top piece of the case, after removing all the black screws lining the side of the case of course. Only the back part of it comes up about an inch, but the front part is stuck somewhere and now I can't even close the usb/card reader enclosure. I've tried for a while now and im stumped. If anyone has any experience with disassembling this case please help, I really want to get it painted! Thanks!
Like you, I took advantage of Apple's Crossgrade offer and sent in my FCP 4.5 install disc. When I filled out the PDF form to accompany my order, the official title of the offer was "Final Cut Pro 4, Final Cut Pro HD Upgrade to Final Cut Studio." The instructions on the left-hand side of the form stated; "Instructions
1. Fill out this order form and enclose it with
payment of US$199 plus applicable sales tax
and your original Final Cut Pro 4 or Final Cut
Pro HD Install DVD for each Final Cut Studio
Upgrade Kit ordered.
Apple recommends that you make
photocopies of the completed order form
and the face of the Final Cut Pro 4 or Final
Cut Pro HD Install DVD for your records.
2. Mail the completed order form, payment, and
the original Final Cut Pro 4 or Final Cut Pro HD
Install DVD to:
Apple
Attn: Final Cut Pro 4, Final Cut Pro HD
Upgrade to Final Cut Studio
P.O. Box 4014
South Bend, IN 46634-4014
Orders must be postmarked by March 19, 2007."
So three times on the order form the offer was referred to as an upgrade to FINAL CUT STUDIO. As I recall, Apple's website for the offer had the same verbiage.
What I can't figure out is that if I did the same thing as you, how do I know what I have and you don't? Is it Apple's fault you can't remember even though other people with the exact same experience do remember?
Well, David, YOU fire up your copy of FCP, DVDSP, Motion, LiveType, Color or any other effing apple product, and tell me where it says you have "Final Cut Studio 2"
I don't have Final Cut Studio 2. I have Final Cut Studio 1. That's what I received from Apple after sending in my FCP 4.5 install disc. Unless you were extremely lucky, that's what you should have received also.
-Bucko
Similar Messages
-
Hi there,
I need help logging in when it asks for username,password and host string.
I know it's prob simple but i'm new to this.
Please help me!!
thanks,
Julie.This binary file is in $ORACLE_HOME/bin
You have to set up ORACLE_HOME and ORACLE_SID in your user environnement (in the shell under Unix, somewhere in the Start->something menu under Windows).
Fred -
Need help in using a case statement in expression operator
Hi All,
I am using OWB version 10.2.0.1.0.
My requirement is to add a new column called call _zone_key in expression operator and map it to the target table. I need to use the below expression for populating call_zone_key values
Expression:
case when (INGRP1.CHARGETYPE in ('O','F') or INGRP1.TARIFF_GROUP in ('SMSINT','MMSINT')or ( INGRP1.CALL_TYPE = '002' and INGRP1.TARIFF_GROUP = 'MTV'))
then
(select call_zone_reltn_key from call_zone_reltn where
call_zone_cd=substr(case
when substr( INGRP1.B_SUBNO,1,2)='00'
then
substr( INGRP1.B_SUBNO,3)
else substr( INGRP1.B_SUBNO,1)
end,1,length(call_zone_cd))and rownum=1)
else -1
end
All the columns needed for using the above expression is available in INGRP1 but still I am unable to deploy the mapping using above expression. Call_zone_reltn table is also imported to the module. I am getting below error
Error:
Warning
ORA-06550: line 4980, column 2:
PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
NEW_MOD_MAP_CELL_USAGE_FCT_PRE
Create
Warning
ORA-06550: line 4989, column 43:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
* & - + ; / at for mod remainder rem <an exponent (**)> and
or group having intersect minus order start union where
connect || multiset
If i replace the expression with numbers such as 1 or 2, I am able to deploy the mapping.
Kindly help in fixing this issue.
Thanks,
KabilanYou can't use the SELECT statement inside the expression, you need to join both tables before the expression. Use a Join operator with this JOIN condition:
CALCULATED_CALL_ZONE_CD = call_zone_reltn.call_zone_cd ( + )
Where Calculated_call_zone_cd proceed from a previous expression:
CALCULATED_CALL_ZONE_CD = substr(case when substr( INGRP1.B_SUBNO,1,2)='00' then substr( INGRP1.B_SUBNO,3) else substr( INGRP1.B_SUBNO,1) end,1,length(call_zone_cd))
And after joining both tables, you can use another expression to get the rownum, then another filter operator to keep only the rownum = 1, and now you can use your expression without the SELECT, using the call_zone_cd column from the outgroup in the joiner operator (you need to include that column in the filter operator to use it).
Regards
ANA GH -
I realize this board is for Xperia tablets, but I don't see a board for Xperia Smartphones. I do hope someone here can help. I have a Sony Xperia T2 Ultra smartphone. I love the phone, but I purchased a case for it not realizing that the case doesn't have a slot on the side for the mini-usb connector, which means that I have to charge the phone with the case open.
I called Sony accessories, and they don't seem to make a case with a slot on the side. They have a very nice case, but again, it doesn't have the correct opening for the charger and you have to charge the phone with the case open.
I have also searched several websites for such a case with no luck.
Does anyone here know where I can find a wallet-style case for the Sony Xperia T2 Ultra with a magnetic closure (or some way of securing the case closed) that will actually allow me to charge the phone while the case is closed? Please let me know.This is the only "question" I could extract out of your confusing post:
"I want to know if it even can be done in Flash or would we need to use something else like PHP or Javascript?"
It can`t be done in Flash alone you need php.
With the experience level you already admitted to, I strongly advise to stay away from such a project, you will save you and our customer a lot of headaches, no offense. -
Need help with changing letter cases : (
Hey everyone, I have an assignment that needs to
1) allow the user to enter a sentence
2) count the number of upper case, lower case, spaces, and other characters in the sentence,
3) convert each first letter of a word into upper case if not already in upper case,
4) convert non first letters to lower case if not already in lower case
So, I have been successfull counting all characters, but I can't seem to find a way to convert the letter cases.
I understand I have to distinguish first letters and non first letters, and I did this by using a boolean.
Also, I tried to use a for loop and convert the letter cases accordingly by += 32 and -= 32.
This is what I have for now :
import javax.swing.JOptionPane;
public class Asg3 {
public static void main(String [] args) {
String sentence = JOptionPane.showInputDialog("Enter a Sentence!");
int length = sentence.length();
int counter = 0;
int uppercase = 0;
int lowercase = 0;
int space = 0;
int other = 0;
int total = 0;
boolean firstletter = true;
char thischarac;
for (counter = 0; counter < sentence.length(); counter++)
thischarac = sentence.charAt(counter);
if ( thischarac >= 65 && thischarac <= 90 ) {
++ uppercase;
else if ( thischarac >= 97 && thischarac <= 122 ) {
++ lowercase;
else if ( thischarac == 32) {
++ space;
else {
++ other;
++ total;
for (counter = 0; counter < sentence.length(); counter++) {
thischarac = sentence.charAt(counter);
if (firstletter == true) {
if (thischarac >= 97 && thischarac <= 122) {
thischarac -= 32;
else
if (firstletter == false)
if (thischarac >= 65 && thischarac <= 90) {
thischarac += 32;
System.out.println("You have entered: " + sentence);
System.out.println("Upper case Letters: " + uppercase);
System.out.println("Lower case Letters: " + lowercase);
System.out.println("The number of blank spaces: " + space);
System.out.println("The number of other characters: " + other);
System.out.println("Grand total: " + total);
System.exit( 0 );
I am stuck on this for hours now, and all googling, asking friends, going over lectures have failed, and this is my last resort.
I understand it is frustrating when students come here for homework, but I would really appreciate any hints or help.
Thank you!Oh, sorry I'm new and didn't realize the code button. Anyways, here it is
import javax.swing.JOptionPane;
public class Asg3 {
public static void main(String [] args) {
String sentence = JOptionPane.showInputDialog("Enter a Sentence!");
int length = sentence.length();
int counter = 0;
int uppercase = 0;
int lowercase = 0;
int space = 0;
int other = 0;
int total = 0;
boolean firstletter = true;
char thischarac;
for (counter = 0; counter < sentence.length(); counter++)
thischarac = sentence.charAt(counter);
if ( thischarac >= 65 && thischarac <= 90 ) {
++ uppercase;
else if ( thischarac >= 97 && thischarac <= 122 ) {
++ lowercase;
else if ( thischarac == 32) {
++ space;
else {
++ other;
++ total;
for (counter = 0; counter < sentence.length(); counter++) {
thischarac = sentence.charAt(counter);
if (firstletter == true) {
if (thischarac >= 97 && thischarac <= 122) {
thischarac -= 32;
else
if (firstletter == false)
if (thischarac >= 65 && thischarac <= 90) {
thischarac += 32;
System.out.println("You have entered: " + sentence);
System.out.println("Upper case Letters: " + uppercase);
System.out.println("Lower case Letters: " + lowercase);
System.out.println("The number of blank spaces: " + space);
System.out.println("The number of other characters: " + other);
System.out.println("Grand total: " + total);
System.exit( 0 );
}The problem I'm having is converting letters to their right cases. I need to change the first letters of a word to upper cases, and non first letters to lower cases. For example, if the sentence the user entered is
"tHIS AssigNMent IS harD!" , I would have to convert it to : "This Assignment Is Hard!"
What I tried to do is use a for loop and a boolean.
If firstletter == true, and if the character was lower case, I would subtract 32 from that character.
If firstletter == false, and if the character was upper case, I would add 32.
The problem here is that, what do I have to do to make it print the converted sentence? I have tried System.out.println( "The new sentence is :" + sentence); which gives me only the original sentence,
and System.out.println("The new sentence is :" + thiscarac); which gives me all capital letters.
So there are two main problems:
1) Is my forloop and boolean correct in converting the cases? Am I using the right method?
2) If so, how do I get the system to printout the new converted sentence?
Edited by: ShaRpy on Oct 28, 2008 4:51 PM -
Need help in writing test cases while upgradin oracle from 10g to 11g
hi all
I want to write test cases for ugrading oracle 10g to 11g i have some idea but want your input.and at the same time some people taking upgrade testing as to ensure that everything works after the upgrade - stremas, jobs, procedures.but i think as 11g is backward compatible all the things should work properly.If not then how can we write a test cases for that,your help is most welcome.
Thanks in advanceHi;
Please see below notes which could give you some idea to create your test case. By the way if your components are certified wiht 11g so there should be any bad issue for your upgrade
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Please check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios -
My current application acquires data when it sees a TTL trigger line. Then it wait until the next TTL pulse and continues taking data until the user stop the data acquisition process. I use "counter 0" as counter source. The program works well. However I need to read digital data everytime I take AI data. I plan to use "counter 1" to read the digital data. The trick is that I need to synchronize both AI and counter 1 readings. Therefore the counter 2 will acquire data when AI acquires data.
Here is the code I implemented and would like to know if it is correct. The new code (implementation of second counter) is in the bottom part of the code. I will really appreciate your help.
Yajai
Attachments:
code.txt 6 KBHi DrObb,
What is sounds like you want to do is to specify an external sample clock for your analog acquisition and a digital acquisition. Is there a reason in particular that you're using a counter? What hardware are you using? If you simply want to sample a digital and analog channel on the same clock edge, this won't be very difficult (provided your hardware supports hardware-timed digital IO). You can find an example of this being done in C by going to:
Start » All Programs » National Instruments » NI-DAQ » Text-Based Code Support » ANSI C Examples and then navigating to Synchronization\Multi-Function\ContAI-Read Dig Chan
Regards,
Sean
Sean Ferguson
Application Engineering Specialist | RF and Reconfigurable Test -
NEED HELP IN THIS PARTICULAR CASE OF ALV
*& Form f_event_build1
text
FORM f_event_build1.
DATA: ls_event TYPE slis_alv_event,
it_events LIKE TABLE OF ls_event "added
DATA : c_sub_end_of_page TYPE string VALUE 'SUB_END_OF_PAGE'.
*Pass set_pf_status as an event.
ls_event-name = slis_ev_PF_STATUS_SET.
MOVE 'SET_PF_STATUS' TO ls_event-form.
APPEND ls_event TO it_events.
CLEAR ls_event.
*Pass user_command as an event.
ls_event-name = slis_ev_USER_COMMAND.
MOVE 'USER_COMMAND' TO ls_event-form.
APPEND ls_event TO it_events.
CLEAR ls_event.
Pass top of page as event
ls_event-name = slis_ev_top_of_page.
MOVE 'SUB_TOP-OF-PAGE' TO ls_event-form.
APPEND ls_event TO it_events.
CLEAR ls_event.
*Pass end of page as an event.
ls_event-name = slis_ev_end_of_page.
MOVE c_sub_end_of_page TO ls_event-form.
APPEND ls_event TO it_events.
CLEAR ls_event.
ENDFORM. "f_event_build1
IN ANOTHER PERFORM AM CALLING THE FUNCTION MODULE AM DOING THIS
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = 'INVENTORY DOCUMENTS'
I_GRID_SETTINGS =
is_layout = struct_layout
it_fieldcat = it_fieldcatalog
I_SAVE = ' '
IS_VARIANT =
it_events = it_events[]
TABLES
t_outtab = it_item
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE s014.
ENDIF.
THEN AM CALLING THIS.
*& Form sub_top_of_page
text
FORM sub_top_of_page.
DATA: listwidth TYPE i,
ld_pagepos(10) TYPE c,
ld_page(10) TYPE c.
listwidth = 120.
WRITE: sy-uline(50).
SKIP. WRITE:/40 text-009, sy-pagno .
ENDFORM. "end_of_page
*& Form end_of_page
text
FORM sub_end_of_page.
DATA: listwidth TYPE i,
ld_pagepos(10) TYPE c,
ld_page(10) TYPE c.
listwidth = 120.
WRITE: sy-uline(50).
SKIP. WRITE:/40 text-009, sy-pagno .
ENDFORM. "end_of_page
NOW WHILE DEBUGGING ITS ENTERING TO THE TOP OF PAGE EVENT AND EVEN I CAN SEE WHAT ITS WRITING IN THE DISPLAY LIST BUTTON
BUTTON WHILE GETTING THE OUT PUT THE TOP OF PAGE IS NOT COMING
WOULD YOU PLEASE ASSIST ME
AM DOING THIS AS I NEED MY TEXTS IN THE TOP OF PAGE TO BE ADJUSTED AS PER INSTRUCTION .hi balaji thanks for the sugession but
by mistake i have written that code
actually i had already converted that code
else it would have not come inside the sub_top_of page
here is my code and see while posting the thread i have written that while debugging its coming inside the top of page event.
now would you please help me how to get the written data in the top of page
my top of page is coming totaly blank. means only sapce is coming no written data
though while debugging i can see that data is written.
ls_event-name = slis_ev_top_of_page.
MOVE 'SUB_TOP_OF_PAGE' TO ls_event-form.
APPEND ls_event TO it_events.
CLEAR ls_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_grid_title = 'INVENTORY DOCUMENTS'
is_layout = struct_layout
it_fieldcat = it_fieldcatalog
it_events = it_events[]
FORM sub_top_of_page.
WRITE: sy-uline(50).
SKIP. WRITE:/40 text-009, sy-pagno .
ENDFORM. "sub_top_of_page -
Need help to find protective case for iPhone 3G
I am looking for a protective case (preferably black one) for my new iPhone 3G that can protect the screen from scratches (without bubbles and fairly easy to install), protects the remainder from scratches, and allows access to all its buttons.
The Apple store seems to be out of many of them and it is difficult to tell on the online Apple store which one is actually going to work.
Does anyone have any suggestions?A friend of mine has an otterbox for his Touch. It it bullet-proof. They have one for the 1st gen iPhone, but not yet for the 3G. It should be out any second now. It is very high quality. I am waiting for that. I need something that I can strap to my arm or Camelbak strap and survive if I crash or it rains. That will. There are reviews on amazon. (cheaper on amazon than their own site)
-
Need help with special select case
Oracle DB 12c, I think 12.1.2
drop table person_tests;
create table person_tests (
person_id number,
test_type_id varchar2(1),
test_date date
insert into person_tests (person_id,test_type_id,test_date) values (1,'A',to_date('01012000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'A',to_date('01022000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'B',to_date('01032000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'B',to_date('01042000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'C',to_date('01052000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (2,'C',to_date('01062000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'A',to_date('01072001','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'A',to_date('01082000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'B',to_date('01092000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'B',to_date('01102000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'C',to_date('01102000','MMDDYYYY'));
Persons as participating in certain tests: A, B and C where each test is tagged with a date when done.
I need to output only people that completed 2 tests of type A, 2 tests of type B and 1 test of type C. I have to display the test type and the date of the most recent of those tests. In the example above, desired output would be
1 C 05-JAN-00
3 A 07-JAN-01
Hope this problem definition makes senseHi,
Sorry, I missed the requirement about showing the most recent test_type_id.
Assuming the date to be shown is the date the minimum requirements were fulfilled (whether of not gratutitous tests came afterwrds), you can do something like this:
WITH got_r_num AS
SELECT person_id, test_type_id, test_date
, ROW_NUMBER () OVER ( PARTITION BY person_id, test_type_id
ORDER BY test_date
) AS r_num
FROM person_tests
WHERE test_type_id IN ('A', 'B', 'C')
SELECT person_id
, MIN (test_type_id) KEEP (DENSE_RANK LAST ORDER BY test_date) AS last_test_type
, MAX (test_date) AS last_test_date
FROM got_r_num
WHERE r_num <= CASE test_type_id
WHEN 'A' THEN 2
WHEN 'B' THEN 2
WHEN 'C' THEN 1
END
GROUP BY person_id
HAVING COUNT (*) = 5 -- 2 'A's + 2 'B's + 1 'C'
What test_type_id would you want to display in case of a tie for the latest test?
I just saw your post saying that a person with 3 or more type 'A' tests should be excluded. In that case, my original solution (with = in the main WHERE clause) is what you want; only used LAST to get the latest test_type_id. The solution in this message is for the situation where you don't care if someone had 3 or more 'A's, but you want to ignore all but the first 2. -
Need help finding a Metal case for my Iphone
I sometimes work around heavy equipment and bump into things and I fear that I will break my Iphone so it is just sitting in a box until I can find something that will really protect it. What I would like is a metal case that has a metal cover that flips over the front glass part. I want to be able to have it withstand someone stepping on it and not break the glass or any part of it. I do have a metal case but it doesn't protect the front screen and I can't seem to find something that protects the whole thing. Has anyone seen what I am looking for and can point me to it. Thanks very much.
UriahSkyUriahsky,
Any case you put around the iPhone should also be transparent to radio waves around the antenna. Metal is not.
There are several hard plastic cases that are radio transparent, but I am not aware of any metal cases that meet your requirements, and would still allow the iPhone to access wireless networks or use the phone portion.
Hope this helps,
Nathan C. -
I Need Help ID-ing My Stolen Macbook Pro
Hello, my MacBook Pro 13" was stolen, it has Euro Keyboard Layout, Thats not common in Jamaica. Yesterday i saw a MacBook Pro at a Pawn Shop Fitting The Description of mine. How can i know for sure that its mine? i don't have the receipt, i dont know the serial number, its was not registered online at Apple either. Please help!!!! there must be a way.
Hey Arkansas11,
Thanks for the question. I understand you are experiencing issues with connecting your MacBook Pro to an HDMI TV. The following resource may help to resolve your issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
Hello all, and thanks for the help in advanced. I have the current version of iTunes, and am using Windows Vista. I have an iPod touch 2nd gen with the software 2.2.1, and have bought the software 3.2.1 and am having trouble downloading it completely. It starts up fine and downloads all but .1 mb, and then give me err 3259. I've read a couple of threads here in the forums, and I've disabled my firewall and tried to download, but no luck. I've seen someone say disable any anti-virus program I may have, but I've yet to try it, as I have my doubts about that and how it will help. But I will try it soon.
Any help? Thanks againI'm having the same problem. I bought an album with iTunes three days ago and it refuses to download the music. Funnily enough, I downloaded the "Free Single of the Week" from the iTunes Store homepage and it downloaded instantly. Also, I've got Vista, too.
I sent a problem request through e-mail via the iTunes website and got a generic response to the problem. One of the solutions to it is to uninstall and re-install iTunes. There' also a webpage with the rest of it linked here: http://support.apple.com/kb/TS1368
Hope that helps. If not, maybe we can help each other. -
Getting a new phone - need help transitioning
I had my Palm Pre Plus for Verizon for just over a month when the phone overheated and became non-functional. The Verizon store was unable to restore the phone to operational status and I am being shipped a new Palm Pre Plus.
Anyway, before the phone became totally disabled, I connected the device to my computer via USB and backed up all of the internal directories and files contained on the Pre Plus. Question: Am I able to restore all of the text messages, attachments, and photographs to the new phone? I am not worried about the email, contacts, and calendar since these were synchronized with my Google account and am assuming I can do the same with the new phone.
It looks as though much of this information is store in the directories I backed up.
Thank you.
Post relates to: Pre Plus p101vzw (Verizon)Hello and welcome to the forums;
Text messages, call logs, ringtone preferences, etc. are not backed up in the Profile, and are not stored on the USB portion of the drive. Pictures, mp3s, movies, and documents are stored in the USB drive, and those will be recovered.
As for attachments saved from emails, it depends on what type of attachment as to whether or not the file will be in the part of the USB drive you can access.
Hope this helps,
TreoAide -
New gtx 670 PE: need help oc'ing while maintaining longevitiy
Hey everyone,
so i recently picked up a GTX 670 Power edition, and have tinkered around with overclocking it.
so far, i have it at:
+40 Core voltage
114% power limit
+91 Core Clock
+635 Memory clock
I am currently stable running heaven benchmark and playing battlefield 3, with temperatures topping at 67c
now my question is, how safe is it to run +40mv on the corevoltage for everyday use and how far can voltage be pushed before hurting the card's lifespan. I wish to keep this card running at top shape for atleast 3 years, so im a bit worried about pumping excessive voltage through it.
I'm pretty new to GPU overclocking, but have some experience with cpu overclocking so i know that voltage and electromigration are a concern with cpu overclocking and its lifespan, thus im worried about pushing that core voltage slider too far. Can anyone give some advice?
Thanks!You are absolutely safe. You can't set dangerous voltages with Afterburner as long as gpu does not overheat. Your 67°C are very fine. You are 30°C from the max temp of 97°C (http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-670/specifications) so that's brilliant. Right now there is no problem with shortened lifespan in your case.
Maybe you are looking for
-
Getting extra scenes when burning from imovie to dvd using idvd.
I edited a movie using imovie and got it n the sequence I want. Then I burned it to dvd using idvd. However, when I view the dvd, it starts midway through the video, goes to the end, then starts over and shows me the whole video. The problem is, I
-
Hi, I am trying to use the SOAP lookup within an UDF. The example in Bhavesh blog worked great and when I plug in my web service lookup I have run into all sorts of issues. My response message from the webservice looks like this: <env:Envelope xmlns:
-
How to Configure ALE by defining Logical Systems, RFC destinations, Maintaining partner profiles, Outbound processing to exchange Idocs between systems.
-
ThankS Bob, now Well I try, .. I have:Tuxedo 6.5, and in wtc_admin.pdf, says that: User Authenticaion for Tuxedo 6.5,... "Tuxedo 6.5 users should set the Interoperate parameter to Yes.TheAclPolicy and CredentialPolicy elements are ignored and the Tux
-
Administration Console Connection Count
I'm unable to acquire an accurate connection count for live streams. My current setup entails a live Multi-Bitrate stream via HTTP HLS and HDS with DVR (HDS) and sliding window (HLS). My connection count persistently shows five connections, which i