Need help dont understand protection... always accessible by some browser extension

Hello,
Excuse me for my bad english no forum in french..
I have implemente adobe access and adobe access manager.
Its OK my config work.
I test to encrypt file with manager.
and test my video with this:
http://lab.flashedge.net/osmf/mediatester.html#
but... i dont understand why with some extension (chrome) example real player
and FVD downloader... my video is accessible....
when i request the trial to adobe i read the doc and i see that can
protect http progressive download... but i dont know how because
my video is always accessible.....................
do you have any doc reference or example... or some info to tell
me how can protect my content?
thanks alot

Hello,
We public a quickstart guide here, on how to quickly get basic playback set up and running on a system: http://www.adobe.com/support/flashaccess/pdfs/FAXS_3_0_QuickStart.pdf
For deeper documentation on how you would build up your client and server components, more resources can be found here: http://www.adobe.com/support/documentation/en/flashaccess/
cheers,
/Eric.

Similar Messages

Need help in understanding the error ORA-01843: not a valid month - ECX_ACT

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

I need help viewing password protected PDF files on my tablet

I need help veiwing password protected PDF files on my tablet

Any free apps available especially for this purpose?
not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

I need help in understanding the customization of Landscape in R/3.

I need help in understanding the customization of Landscape in R/3. Setup of SAP Landscape from an SAP SD point of view. Being as SAP SD consultant what would be my role in customizing the Landscape server. Help needed. Thx

Hi,
In a standard SAP project implementation, the 3 standard transport procedures are:
Development System (DEV) --> QA System (QAS) --> Production System (PRD)
In the above structure, the Training Client (TRN) could be made from the copy of PRD (after when real-time master data has been available) or from QA system (where configuration has been tested in DEV client, and the master data is uploaded manually for training purposes)
Sandbox (standalone): This can be refreshed with Golden Client to reflect the latest configuration performed to facilitate the development/testing purposes.
-Development (DEV): Where all system configurations and development activities are carried out.
-Quality Assurance (QAS): Where functional testing is carried out. The System Integration Testing (carried out by the -Development Team) and the User Acceptance Testing (carried out by XXX appointed personnel) is carried out in this server.
-Training (TRN): End Users are trained on this server.
-Production (PRD): After the System is commissioned all data entry and administrative functions will be carried out in this server.
This is by far the standard landscape architecture that is adopted and practiced in most implementations.
Hope the above helps.
Thanks.

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I'm receiving a message when I open Safari that says it is no longer supported & I need to disable some browser extension. How do I do this? I checked Safari Extensions on my Mac & found none.

I'm receiving a message when I open Safari that says my version is no longer supported(5.1.10) & I need to disable some browser extension. In Safari Extensions there are no extensions. What should I do? Thanks for your help.

I now use the TenFourFox browser on our remaining PowerPC Macs including a G4 PowerBook. Web sites see it as a newer version of FireFox tha and G4 can support and you get much better compatibility. Wikipedia info/history here:
http://en.wikipedia.org/wiki/TenFourFox
The TenFourFox official site and download is here:
http://www.floodgap.com/software/tenfourfox/
Downside: the last version of TFF that supports plug-ins was V17 so current versions won't play Flash animations. Even when TFF played Flash, the old G-series Mac processors were struggling with modern web video content, so you are not losing much.
If you must have smooth-playing web video, you'll need a new computer, as very little web video content is optimized for our PowerPC processors on old Macs.

Need help to understand about cluster

Hi,
I am a SQL developer, and need a little help to understand what clusters are. I never came across to create any cluster. Can someone plz help me with simple example, what is cluster and in which situation we create cluster?
Thanks
Shantanu

>
I am a SQL developer, and need a little help to understand what clusters are. I never came across to create any cluster. Can someone plz help me with simple example, what is cluster and in which situation we create cluster?
>
A cluster is used to store data from more than table together. The data would typically share the primary key. For example the scott DEPT and EMP table data is related based on the DEPTNO value so DEPTNO could be the cluster key.
If you created a cluster and then created copies of those tables in the cluster (e.g. myDEPT and myEMP) Oracle would store the dept and emp data for the same DEPTNO value together, even in the same block.
Then when you query dept and emp data using DEPTNO it will be faster to retrieve the DEPT and EMP data for that department since it is colocated in the same blocks.
The drawbacks are that when you only want data from one of the tables (e.g. emp) Oracle has to skip over the DEPT data since some of it will be in the same blocks that the EMP data is in.
So clusters and clustered tables are most useful when you always query multiple cluster tables using the cluster key. For some other operations they can be very inefficient.
See the Admin Guide for an example using the DEPT and EMP tables
http://docs.oracle.com/cd/E11882_01/server.112/e25494/clustrs003.htm#ADMIN11747

Need help for understanding the behaviour of these 2 queries....

Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1     1
A1     3
A1     5
A2     1
A2     3
A2     5
A3     1
A3     3
A3     5
A4     1
A4     3
A4     5
A5     1
A5     3
A5     5
Here in the output, I am not getting rows like
A1     2
A1     4
A2     2
A2     4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1     4
A2     1
A3     5
A4     2
A5     2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1     1
A1     2
A1     3
A1     4
A2     1
A3     1
A3     2
A3     3
A3     4
A3     5
A4     1
A4     2
A5     1
A5     2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?

If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old   1: insert into test values('&test')
new   1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old   1: insert into test values('&test')
new   1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old   1: insert into test values('&test')
new   1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old   1: insert into test values('&test')
new   1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy

Need help in understanding FA acquisition via Internal Order

Hi Gurus
I need your help in understanding the FA acquisition via Internal Order. The process we are following is that we create AUC using the AUC asset class and enter that AUC number in the settlement rule while creating IO. Once IO budget is approved, we release the IO. Once GR is completed, we do the Invoice receipt for the PO, followed by settlement of IO against the AUC. Afterwards, we create fixed asset in AS01 and enter this asset number in the settlement rule for the AUC in AIAB and settle the AUC to Fixed asset for the costs.
My question is that during all this process, I don't see the PO information in the AUC record. When I display AUC, under the Enviornment tab, I see the Purchase order link but when I click it, there is nothing in there. The reason could be that we are creating AUC seperatly and not from within the IO where it says create AUC. I am not sure what is the best way for the whole process.
I would be thankful if you can guide me.
Thanks,
Shalu

Hi
Can someone please help me with this issue?
Thanks,
Shalu

Need help to understand INSTALL command based on GPspec 2.1.1

Hi Friends..
Sorry before, i couldn't understand some commands based on GPSpec 2.1.1, i'm pretty new in this field..
So, i need your help to help me understand about the commands..
Firstly, i want to know what exactly the DATA that referred by INSTALL Command..
here's outlined in the GPSpec 2.1.1 for INSTALL Command (Chapter 9)..
CLA = '80' or '84'
INS = 'E6'              //INSTALL
P1   = 'xx'               //Reference control parameter P1
P2   = '00'               //Reference control parameter P2
Lc   = 'xx'                //Length of data field
Data 'xxxx'           //Install data (and MAC if present)
Le   = '00'What exactly the data referred?.
I thought the data which referred can be Applets, Packages, CAP files..
So, how to know the LC and Sequence bytes of the Applets/ Packages/ CAP files..
i found this LINK..
In the website i read an example of INSTALL Command..
Here's an example mentioned in the link above..
INSTALL FOR LOAD
84 E6 02 00 2B 10 A0 00 00 00 18 50 00 00 00 00 00 00 52 41 44 50 00 00 0E EF 0C C6 02 00 00 C8 02 00 00 C7 02 00 00 00 2A 8B 3A 01 3C 8E FD A4 (00)
00, 90 00 [Normal ending of the command.] Sorry, i'm still not understand about it..
Please help me regarding this..
Sorry, perhaps this question sounds silly..
Thanks in advance..

Hi,
As a hint, you want to use INSTALL for install and make selectable. You can have a look at the APDU that GPShell sends through for the final install command (hint: it will be a part of the load command). You can also execute install_for_load, load and install_for_install in GPShell to see these commands. The GP card spec is a little confusing for the INSTALL command so tracing GPShell may help you understand it.
Cheers,
Shane

Need help on understanding COLUMN_IID, COLUMN_ID and ROW_IID

Dear All,
I need some help in understanding the below three things.
COLUMN_IID, COLUMN_ID and ROW_IID
First let me write down the requirement :
I need to keep track of the scores on various status change.
In the design of the template, we have something called 'Company Objectives' and 'Team Objectives' and 'Individual Objectives'.
And under every heading, there are some objectives and a score beside it.
When the document is with the employee, then he/she decides the score (0-Not started and 5-Completed). And when the employee submits the document then it goes to manager. The manager may change the score against an objective.
Now, the requirement is with every change of status and substatus, i need to take a note of the score. Is this value stored in any standard table. I checked the table HRHAP_FURTHER but i cannot
When i check the Function Modules 'HRHAP_DOCUMENT_GET_DETAIL' and 'HRHAP_DOC_FURTHER_READ', then i see those values but against various ROW_IID and COLUMN_IID and COLUMN_ID. I need to know how to catch the ROW_IID and COLUMN_IDD and COLUMN_ID for a particular objective. And what is the concept of the ROW_IID and COLUMN_IID and COLUMN_ID.
Please let me know if something is not very clear. I will try to give some more explaination.

Hi,
For the context, in case it was not clear in the original message, we are talking Performance Management.
As you know the documents are based on appraisal templates. On document create this template is read and the different elements are generated. As we can have the same element type/id multiple times in a template/document we need something to uniquely identify them. This is done via the ROW_IIID.
Then for each element we can define which columns we use. A column is identified with COLUMN_ID, which i9s unique when we are on template configuration level. But on document level this is not the case. Due to the Part Appraiser columns (PAPP/PFGT) being multiplied by the number of part appraisers in the document the COLUMN_ID is not unique anymore. So we need to give them also a unique ID, which is the COLUMN_IID.
Thats the short answer, I will write a longer document on it one of these days in my blog.
Regards and Groetjes,
Maurice Hagen

Error Posting IDOC: need help in understanding the following error

Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!

Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash

E-Rows = NULL and A-Rows=42M? Need help in understanding why.

Hi,
Oracle Standard Edition 11.2.0.3.0 CPU Oct 2012 running on Windows 2008 R2 x64. I am using Oracle 10g syntax for WITH clause as the query will also run on Oracle 10gR2. I do not have a Oracle 10gR2 environment at hand to comment if this behaves the same.
Following query is beyond me. It takes around 2 minutes to return the "computed" result set of 66 rows.
SQL> WITH dat AS
2          (SELECT 723677 vid,
3                  243668 fid,
4                  TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
5                  TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
6             FROM DUAL
7           UNION ALL
8           SELECT 721850,
9                  243668,
10                  TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
11                  TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
12             FROM DUAL
13           UNION ALL
14           SELECT 723738,
15                  243668,
16                  TO_DATE ('16.03.2013', 'dd.mm.yyyy'),
17                  TO_DATE (' 04.04.2013', 'dd.mm.yyyy')
18             FROM DUAL)
19      SELECT /*+ GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
20        FROM dat
21 CONNECT BY LEVEL <= maxdt - mindt + 1
22 order by fid, vid, dtshow;
66 rows selected.
SQL>
SQL> SELECT * FROM TABLE (DBMS_XPLAN.display_cursor (NULL, NULL, 'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 9c4vma4mds6zk, child number 0
WITH dat AS         (SELECT 723677 vid,                 243668 fid,
            TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt            FROM DUAL
UNION ALL          SELECT 721850,                 243668,
   TO_DATE ('06.02.2013', 'dd.mm.yyyy'),                 TO_DATE ('
22.03.2013', 'dd.mm.yyyy')            FROM DUAL          UNION ALL
    SELECT 723738,                 243668,                 TO_DATE
('16.03.2013', 'dd.mm.yyyy'),                 TO_DATE (' 04.04.2013',
'dd.mm.yyyy')            FROM DUAL)     SELECT /*+
GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
    FROM dat CONNECT BY LEVEL <= maxdt - mindt + 1 order by fid, vid,
dtshow
Plan hash value: 1865145249
| Id | Operation                              | Name | Starts | E-Rows | A-Rows |   A-Time   | OMem | 1Mem | Used-Mem |
|   0 | SELECT STATEMENT                       |      |      1 |        |     66 |00:01:54.64 |       |       |          |
|   1 | SORT UNIQUE                           |      |      1 |      3 |     66 |00:01:54.64 | 6144 | 6144 | 6144 (0)|
|   2 |   CONNECT BY WITHOUT FILTERING (UNIQUE)|      |      1 |        |     42M|00:01:04.00 |       |       |          |
|   3 |    VIEW                                |      |      1 |      3 |      3 |00:00:00.01 |       |       |          |
|   4 |     UNION-ALL                          |      |      1 |        |      3 |00:00:00.01 |       |       |          |
|   5 |      FAST DUAL                         |      |      1 |      1 |      1 |00:00:00.01 |       |       |          |
|   6 |      FAST DUAL                         |      |      1 |      1 |      1 |00:00:00.01 |       |       |          |
|   7 |      FAST DUAL                         |      |      1 |      1 |      1 |00:00:00.01 |       |       |          |
--------------------------------------------------------------------------------------------------------------------------If I take out one of the UNION queries, the query returns in under 1 second.
SQL> WITH dat AS
2          (SELECT 723677 vid,
3                  243668 fid,
4                  TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
5                  TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
6             FROM DUAL
7           UNION ALL
8           SELECT 721850,
9                  243668,
10                  TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
11                  TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
12             FROM DUAL)
13      SELECT /*+ GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
14        FROM dat
15 CONNECT BY LEVEL <= maxdt - mindt + 1
16 order by fid, vid, dtshow;
46 rows selected.
SQL>
SQL> SELECT * FROM TABLE (DBMS_XPLAN.display_cursor (NULL, NULL, 'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 1d2f62uy0521p, child number 0
WITH dat AS         (SELECT 723677 vid,                 243668 fid,
            TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt            FROM DUAL
UNION ALL          SELECT 721850,                 243668,
   TO_DATE ('06.02.2013', 'dd.mm.yyyy'),                 TO_DATE ('
22.03.2013', 'dd.mm.yyyy')            FROM DUAL)     SELECT /*+
GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
    FROM dat CONNECT BY LEVEL <= maxdt - mindt + 1 order by fid, vid,
dtshow
Plan hash value: 2232696677
| Id | Operation                              | Name | Starts | E-Rows | A-Rows |   A-Time   | OMem | 1Mem | Used-Mem |
|   0 | SELECT STATEMENT                       |      |      1 |        |     46 |00:00:00.01 |       |       |          |
|   1 | SORT UNIQUE                           |      |      1 |      2 |     46 |00:00:00.01 | 4096 | 4096 | 4096 (0)|
|   2 |   CONNECT BY WITHOUT FILTERING (UNIQUE)|      |      1 |        |     90 |00:00:00.01 |       |       |          |
|   3 |    VIEW                                |      |      1 |      2 |      2 |00:00:00.01 |       |       |          |
|   4 |     UNION-ALL                          |      |      1 |        |      2 |00:00:00.01 |       |       |          |
|   5 |      FAST DUAL                         |      |      1 |      1 |      1 |00:00:00.01 |       |       |          |
|   6 |      FAST DUAL                         |      |      1 |      1 |      1 |00:00:00.01 |       |       |          |
26 rows selected.What I cannot understand is why the E-Rows is NULL for "CONNECT BY WITHOUT FILTERING (UNIQUE)" step and A-Rows shoots up to 42M for first case. The behaviour is the same for any number of UNION queries above two.
Can anyone please help me understand this and aid in tuning this accordingly? Also, I would be happy to know if there are better ways to generate the missing date range.
Regards,
Satish

May be, this?
WITH dat AS
            (SELECT 723677 vid,
                    243668 fid,
                    TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
                    TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
               FROM DUAL
             UNION ALL
             SELECT 721850,
                    243668,
                   TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
                   TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
              FROM DUAL
            UNION ALL
            SELECT 723738,
                   243668,
                   TO_DATE ('16.03.2013', 'dd.mm.yyyy'),
                   TO_DATE (' 04.04.2013', 'dd.mm.yyyy')
              FROM DUAL)
       SELECT vid, fid, mindt - 1 + LEVEL dtshow
         FROM dat
CONNECT BY LEVEL <= maxdt - mindt + 1
      and prior vid = vid
      and prior fid = fid
      and prior sys_guid() is not null
order by fid, vid, dtshow;
66 rows selected.
Elapsed: 00:00:00.03

Need help in understanding why so many gets and I/O

Hi there,
I have a sql file somewhat similar in structure to below:
delete from table emp;-- changed to Truncate table emp;
delete from table dept;--changed to Truncate table dept;
insert into emp values() select a,b,c from temp_emp,temp_dept where temp_emp.id=temp_dept.emp_id
update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);
commit --only at the end
the above file takes about 9-10 hrs to complete its operation. and
the values from v$sql for the statement
update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);
are as below:
SHARABLE_MEM PERSISTENT_MEM RUNTIME_MEM SORTS LOADED_VERSIONS OPEN_VERSIONS USERS_OPENING FETCHES EXECUTIONS PX_SERVERS_EXECUTIONS END_OF_FETCH_COUNT USERS_EXECUTING LOADS FIRST_LOAD_TIME INVALIDATIONS PARSE_CALLS DISK_READS DIRECT_WRITES BUFFER_GETS APPLICATION_WAIT_TIME CONCURRENCY_WAIT_TIME CLUSTER_WAIT_TIME USER_IO_WAIT_TIME PLSQL_EXEC_TIME JAVA_EXEC_TIME ROWS_PROCESSED COMMAND_TYPE OPTIMIZER_MODE OPTIMIZER_COST OPTIMIZER_ENV OPTIMIZER_ENV_HASH_VALUE PARSING_USER_ID PARSING_SCHEMA_ID PARSING_SCHEMA_NAME KEPT_VERSIONS ADDRESS TYPE_CHK_HEAP HASH_VALUE OLD_HASH_VALUE PLAN_HASH_VALUE CHILD_NUMBER SERVICE SERVICE_HASH MODULE MODULE_HASH ACTION ACTION_HASH SERIALIZABLE_ABORTS OUTLINE_CATEGORY CPU_TIME ELAPSED_TIME OUTLINE_SID CHILD_ADDRESS SQLTYPE REMOTE OBJECT_STATUS LITERAL_HASH_VALUE LAST_LOAD_TIME IS_OBSOLETE CHILD_LATCH SQL_PROFILE PROGRAM_ID PROGRAM_LINE# EXACT_MATCHING_SIGNATURE FORCE_MATCHING_SIGNATURE LAST_ACTIVE_TIME BIND_DATA TYPECHECK_MEM
18965 8760 7880 0 1 0 0 0 2 0 2 0 2 2011-05-10/21:16:44 1 2 163270378 0 164295929 0 509739 0 3215857850 0 0 20142 6 ALL_ROWS 656 E289FB89A4E49800CE001000AEF9E3E2CFFA331056414155519421105555551545555558591555449665851D5511058555155511152552455580588055A1454A8E0950402000002000000000010000100050000002002080007D000000000002C06566001010000080830F400000E032330000000001404A8E09504646262040262320030020003020A000A5A000 4279923421 50 50 APPS 0 00000003CBE5EF50 00 1866523305 816672812 1937724149 0 SYS$USERS 0 01@</my.sql -2038272289 -265190056 0 9468268067 10420092918 00000003E8593000 6 N VALID 0 2011-05-11/10:23:45 N 5 0 0 1.57848E+19 1.57848E+19 5/12/2011 4:39 0
1) how do i re-write this legacy script? and what should be done to improve performance?
2) Should i use PL/sql to re-write it?
3) Also help in understanding why a simple update statement is doing so many buffer gets and reading , Is this Read consistency Trap as i'm not committing anywhere in between or it is actually doing so much of work.
(assume dept table has cols emp_name and emp_id also)

update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);I guess that these are masked table names ? Nobody would have emp_name in a dept table.
Can you re-format the output, using "code" tags ( [ or { }
Hemant K Chitale
Edited by: Hemant K Chitale on May 12, 2011 12:44 PM

Duplicate partitions, need help to understand and fix.

So I was looking for a USB that I plugged in and went into /media/usbhd-sdb4/miles and realized all its contents was from my home directory.
So I created a random file in my home directory to see if it would also update /media/usbhd-sdb4/miles , and it did.
Can someone help me understand what is happening?
Also if I can fuse sdb4 and sdb2 as one, and partition it as my home directory without losing its contents?
Below is some information that I think would be helpful.
Thank you.
[miles]> cd /media/usbhd-sdb4/
[usbhd-sdb4]> ls -l
total 20
drwx------ 2 root root 16384 May 28 14:16 lost+found
drwx------ 76 miles users 4096 Oct 15 00:42 miles
[usbhd-sdb4]> cd miles
[miles]> pwd
/media/usbhd-sdb4/miles
[miles]>
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 19.5G 0 part
└─sda2 8:2 0 446.2G 0 part
sdb 8:16 0 465.8G 0 disk
├─sdb1 8:17 0 102M 0 part /media/usbhd-sdb1
├─sdb2 8:18 0 258.9M 0 part [SWAP]
├─sdb3 8:19 0 14.7G 0 part /
└─sdb4 8:20 0 450.8G 0 part /media/usbhd-sdb4
sr0 11:0 1 1024M 0 rom

Check your udev rules...

Need help dont understand protection... always accessible by some browser extension

Similar Messages

Maybe you are looking for