Need Help Downloading Windows 2000 SP4.

I recently had a problem with my ipod installation disk and some one had told me I had to download Windows 2000 SP4, well Last night I had downloaded Windows 2000 Service Pack 4 and right after downloading it had been on my desktop so I went to click it and 2 Errors came up which said The W2KSP4_EN.EXE File Is Linked To Missing Export NTDLL.DLL:NTShutDownSystem, and the second Error said A Device Attached To The System Is Not Functioning.
I dont know much about computers and dont know what im doing wrong, I would uninstall it and download it again but I have dial Up and it takes 7 hours to download.
Can anyone help??

Most likely there is a problem with your downloaded file. Can you ask someone with Broadband to download it and burn a CD to you?
Windows 2000 Service Pack 4

Similar Messages

Rookie needs help downloading Windows Live Mobile to her BB Curve 8310

How do I download Windows Live Mobile to my BB Curve 8310??
I've tried both the Hotmail Windows Live and the link to the Blackberry Live, but am not getting anywhere.
The Hotmail Windows Live link comes thru, but if I click on it nothing happens or I get lots and lots of black little squares.
If I clik on the try it link for the blackberry specifically, I get a page that just tells more information, but nothing to download.....??
If I go the software page, I get confused; nothing there that is specifically for the Windows Live Mobile??
Any suggestions?? Thanks in advance!!
(Mrs) Loekie Maddra
Solved!
Go to Solution.

i have a question about the windows live mobile. Is it like instant messages? Does it drain the battery and are you notified of a text like the you are with SMS, MMS, and emails?
Nurse-Berry
Follow NurseBerry08 on Twitter

I get the following error "The procedure entry point RtlCaptureContext could not be located in the dynamic link library KERNEL32.Dll" Please help. Windows 2000 sp4

Firefox crashes frequently in Facebook.com.
and the error written above happens often and I think they are related??

That entry point is only available in Windows XP and later and not in Windows 2000.<br />
*http://msdn.microsoft.com/en-us/library/ms680591%28v=vs.85%29.aspx
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it happens on Facebook then you can also try to remove gadgets from your Facebook page to see if one of them is causing it.

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4

Hi
Sorry for re-posting on this JAVA FX Installation Form form (earlier on JAVA FX general )
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Status : Not able to install
Error : JavaFx(Tm) 1.2 can not be installed on system esrlier than Windows XP x86
May be my OS ( Window 2000 SP4 ) obsolete but I cannot update since Major of other (JAVA 1.5) dev happens on my system
Any Ideas ..... :(
with regards
Karthik

Don't crosspost, please!

How to configure Failed RID master in Windows 2000 SP4 DC?

We are still using windows 2000 SP4 server due to application compatiblity of our core application, this error has occur during a fire here in our office then the physical server itself, migrated to our DR site, then after that event the physical server
itself join again to its original place where as, in H.O branch.
First Problem:
Now our branch office site users always fails to log to their workstation, we still need to reset their password again and again after the day ends , and it will come back again tomorrow.
Second Problem:
When we are adding a user account it always say's "Windows cannot create the object because the Directory Service was unable to allocate a relative identifier" it predict that the RID master has been corrupted because of the migration
from site to site,
Can I still have answers here even though this is way way to obsolete from microsoft, I need help please :)

Hi thanks for your kind reply,
No, there are 4 DC in our environment but the forest root DC has the problem, I only create user accounts, I still not creating other object in active directory.and also the replication between root DC and other DC has problems. but I think its in the DNS
part, just need step by step process. :)
I'll give it a try on what you suggest but is this tried and tested? because when you replicate from corrupted FSMO roles DC, the new DC will also infected with errors,
By the way I already tried ntdsutil to fix the AD database and all are passed.

Need help my window is in thai and i dont understand at all.how to convert to english?

need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.

Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help installing windows free trial on boot camp

i need windows by thursday to run an application. I need to download windows onto boot camp on my mac but I am unable to purchase the software at a store or online. I am not the most tech savvy but I know there windows free trials available.. is there anyway to use a downloadable free trial from the internet and get it working on boot camp? I am in desperate need of help! Thank you!
I found a video on youtube teaching how to use a free trial with virtualbox but when I downloaded the free trial it said "the following disk image could not be opened" with the name of the file and next to it, it says image not recognized
If someone could pass me a link with instructions or any kind of help, i'td be greatly appreciated!

You should buy a copy from Microsoft and download it.
But I am not finding it, use Google.

PEAP on Windows 2000 SP4

I have setup PEAP with ACS Server and it works fine on Windows XP. How can I connect Windows 2000-SP4 PC to the access point with PEAP? Wireless service is running and I have enabled 802.1X with PEAP under the Authentication tab of the network card.
What options should I select under ACU?
Thanks

Hi Avil,
Have a look at this doc to see if it helps;
ACU Installation Precautions
Observe these precautions when you are installing the ACU:
PEAP client devices use the EAP 802.1X support provided in the Windows XP and Windows 2000 operating systems to enable authentication.
Note You must use the operating system to configure the authentication parameters of the PEAP supplicant.
Windows XP supports EAP 802.1X as a standard authentication type. Windows 2000 supports EAP 802.1X authentication with Service Pack 4, but does not provide a Zero Configuration for client adapters. Hence, the ACU (or equivalent) software must be used to configure the client adapter 802.11 operating parameters.
When installing the ACU software, select PEAP support during the initial installation. The PEAP supplicant cannot be added or enabled incrementally after installation; the ACU software must be reinstalled with the PEAP support option selected.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a008025d6ee.html#wp1007967
Hope this helps!
Rob
Please remember to rate helpful posts........

FMS3 on Windows 2000 sp4

hello, im installing FMS3 on windows 2000 sp4 and i encountered this message... something about kernel32.dll.
is this warning ok? or something that would make my FMS would not perform properly?

Hi Avil,
Have a look at this doc to see if it helps;
ACU Installation Precautions
Observe these precautions when you are installing the ACU:
PEAP client devices use the EAP 802.1X support provided in the Windows XP and Windows 2000 operating systems to enable authentication.
Note You must use the operating system to configure the authentication parameters of the PEAP supplicant.
Windows XP supports EAP 802.1X as a standard authentication type. Windows 2000 supports EAP 802.1X authentication with Service Pack 4, but does not provide a Zero Configuration for client adapters. Hence, the ACU (or equivalent) software must be used to configure the client adapter 802.11 operating parameters.
When installing the ACU software, select PEAP support during the initial installation. The PEAP supplicant cannot be added or enabled incrementally after installation; the ACU software must be reinstalled with the PEAP support option selected.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a008025d6ee.html#wp1007967
Hope this helps!
Rob
Please remember to rate helpful posts........

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

I need help installing windows 8.1 on my new laptop help me

i need help installing windows 8.1 on my new laptop Hp Pavilion g7-2298nr help me it installs from store no problem then ask to restart then i restart it it gets stuck at windows logo and drive light on side not blinking i have shut down then it starts fine how to fix this problem so i can get it to install i need do it tonight reply before 8pm

Hello,
Thank you for posting in the HP Support Forum.
Your computer comes with Win 8 pre-installed but one of the steps to install/run Windows 8.1 is having updated drivers for Windows 8.1
Please, go to Control Panel -> System (or Start -> type winver and open) and verify what is your current version - if it is Windows 8 or 8.1
Windows 8 is version 6.2.x
Windows 8.1 is version 6.3.x
If Windows 8 in place, then , please read this article and enroll in the steps:
http://www8.hp.com/us/en/pdf/instruct_update_win8.1_EN_tcm_245_1508074.pdf
Update to the latest drivers prior and post installation respectively for win 8/8.1 :
http://support.hp.com/us-en/product/HP-Pavilion-g7-2200-Notebook-PC-series/5296086/model/5333384/dri...
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution"

Need help downloading Adobe Acrobat X Pro

I purchased Adobe Acrobat X Pro & have an empty disc cover, i cannot locate the disc and need to reload teh software to my PC after a system refresh. I cannot locate the dowload under My Order History or My Download History. Can anyone assist?

Not it’s XI, but I was told it would accept it, it seems I’ve been misled?
Would you be able to help with a link to download Acrobat Pro X?
Re: Need help downloading Adobe Acrobat X Pro
created by Pat Willener<http://forums.adobe.com/people/pwillener> in Downloading, Installing, Setting Up - View the full discussion<http://forums.adobe.com/message/5519614#5519614

My ipad2 can't open a program in the explorer. It says that I need to download windows explorer 6 or higher. It opens other programs. How do I download windows explorer 6 or higher?

My ipad2 can't open a program in the explorer. It says that I need to download windows explorer 6 or higher. It opens other programs. How do I download windows explorer 6 or higher?

That is because whoever programmed the web site used Internet Explorer extentions. These will only run in Internet Explorer. So, use a computer with Windows to use that web site.

BOXI R2 SP4 on Windows 2000 SP4 and Internet Explorer 6 Service Pack 2

Hi
I have a customer that has BOXI R2 SP4 installed on Windows 2000 SP4. He is aware that Internet Explorer 6 Service Pack 1 is not supported for BOXI R2 SP4 but he is not able to find I.E SP2 for Windows 2000 SP4. What can he do as he is experiencing some inconsistencies in Webintelligence?
I have suggested already to:
downgrade BOXI R2 to SP3 and use the line 3 of code as this supports I.E. SP1
upgrade the O/S to XP and use BOXI R2 SP4 and I.E. SP2
Thank you in advance.
Regards,
Federica

I don't see any reason to downgrade BOXi R2 to SP3.
While Microsoft will continue to support Windows 2000 till 2010, BO advises recommends that customers be on the latest SP. In your customer's case, this will not be possible. Also tech support will require one to be on the latest SP before they will troubleshoot any issues. ADAPT resolution also requires on to be on the latest SP.
I think it prudent to upgrade the OS (on the clients) to XP.

Need Help Downloading Windows 2000 SP4.

Similar Messages

Maybe you are looking for