Need help. Dreamweaver wont load due to font.

Dreamweaver CSS wont load. Saids its missing Tahoma font. I have Tahoma loaded in the system fonts. I do have Suitcase Fusion 5. Could that be it?

Thanks Ben,
Good to know. I will do that. Loaded the font into font book which allowed
the application to open. But will upgrade for a permanent fix.
On Mon, Jul 7, 2014 at 10:20 PM, Ben Pleysier <[email protected]>

Similar Messages

Need Help: Computer Wont Load!!!

ok here is what happened. my girlfriend was using her computer last night and it froze...she tried to restart it but it wont restart.
it starts up but just stays at the gray screen with the apple in the middle..what can we do...is the computer dead?

No, things will stay the same. The actual steps are:
1. Inserting the disc, pressing the power button, and immediately after the startup chime, press and hold the C key until you see the spinning gear icon appear on the grey splash screen.
2. After the machine has booted, pick your language, and when the Installer window appears, do not press Continue, but go to the Utilities menu in the menubar and open Disk Utility.
3. In Disk Utility, choose your normal startup volume in the pane on the left and then click Repair Disk. If any errors show in the window, run Repair Disk again until you see 'The volume appears to be OK' in green.
4. Quit Disk Utility, quit the installer and attempt to restart into your regular startup volume.
Joe

Need help with ACE Load Balancing Base on URL pattern

This is the first time for me trying to configure something like this on the ACE load balancer. I need help configuring a load balancing policy base on URL pattern. URL https://ineedhelp.com base on /willuhelpme and /imlost
Key: ineedhelp_key
cert: ineedhelp_cert
serverfarmA
serverA 10.1.1.1 443
serverfarmB
serverB 10.1.1.2 443
ineedhelp.com/willuhelpme-------serverfarmA
ineedhelp.ocm/imlost---------------serverfarmB

This is the first time for me trying to configure something like this on the ACE load balancer. I need help configuring a load balancing policy base on URL pattern. URL https://ineedhelp.com base on /willuhelpme and /imlost
Key: ineedhelp_key
cert: ineedhelp_cert
serverfarmA
serverA 10.1.1.1 443
serverfarmB
serverB 10.1.1.2 443
ineedhelp.com/willuhelpme-------serverfarmA
ineedhelp.ocm/imlost---------------serverfarmB

Help-Safari wont load any pages-others having same problem

Safari wont load any pages. Tried reinstalling Safari. Nothing. Zip. Notice that people on the Safari for Windows board are having the same problem.
WHAT IS GOING ON? Anyone know?
I get the menu bar, but not Bookmarks, etc. Cannot see a blank page. Cannot open a blank page, BUT my efforts (Untitled and Untitled 2) are reflected in the Dock. A right-click there shows that the pages are open, but obviously invisible.
I really need to fix this.
Firefox works. As do other apps.
Message was edited by: mashamax
EDIT:
The last thing I did before this happened was open a .pps file I got in email. If I do what was suggested in the Safari for Win post where someone is having the same problem: empty the cache, everything becomes greyed out. Its as if everything becomes invisible.
If I click on a link in Apple Mail, the URL shows up in the dock right-click as if it has mounted, but it hasn't. No window. Nothing.
Message was edited by: mashamax

Do you actually have a data plan from your cellular provider?
Being connected to 3G does not automatically indicate that a data plan exists on the account or is even set up correctly on the carrier side.

Need help with SQL*Loader not working

Hi all,
I am trying to run SQL*Loader on Oracle 10g UNIX platform (Red Hat Linux) with below command:
sqlldr userid='ldm/password' control=issue.ctl bad=issue.bad discard=issue.txt direct=true log=issue.log
And get below errors:
SQL*Loader-128: unable to begin a session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Can anyone help me out with this problem that I am having with SQL*Loader? Thanks!
Ben Prusinski

Hi Frank,
More progress, I exported the ORACLE_SID and tried again but now have new errors! We are trying to load an Excel CSV file into a new table on our Oracle 10g database. I created the new table in Oracle and loaded with SQL*Loader with below problems.
$ export ORACLE_SID=PROD
$ sqlldr 'ldm/password@PROD' control=prod.ctl log=issue.log bad=bad.log discard=discard.log
SQL*Loader: Release 10.2.0.1.0 - Production on Tue May 23 11:04:28 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader: Release 10.2.0.1.0 - Production on Tue May 23 11:04:28 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: prod.ctl
Data File: prod.csv
Bad File: bad.log
Discard File: discard.log
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table TESTLD, loaded from every logical record.
Insert option in effect for this table: REPLACE
Column Name Position Len Term Encl Datatype
ISSUE_KEY FIRST * , CHARACTER
TIME_DIM_KEY NEXT * , CHARACTER
PRODUCT_CATEGORY_KEY NEXT * , CHARACTER
PRODUCT_KEY NEXT * , CHARACTER
SALES_CHANNEL_DIM_KEY NEXT * , CHARACTER
TIME_OF_DAY_DIM_KEY NEXT * , CHARACTER
ACCOUNT_DIM_KEY NEXT * , CHARACTER
ESN_KEY NEXT * , CHARACTER
DISCOUNT_DIM_KEY NEXT * , CHARACTER
INVOICE_NUMBER NEXT * , CHARACTER
ISSUE_QTY NEXT * , CHARACTER
GROSS_PRICE NEXT * , CHARACTER
DISCOUNT_AMT NEXT * , CHARACTER
NET_PRICE NEXT * , CHARACTER
COST NEXT * , CHARACTER
SALES_GEOGRAPHY_DIM_KEY NEXT * , CHARACTER
value used for ROWS parameter changed from 64 to 62
Record 1: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 2: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 3: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 4: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 5: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 6: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 7: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 8: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 9: Rejected - Error on table ISSUE_FACT_TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 10: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 11: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 12: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 13: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 14: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 15: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 16: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 17: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 18: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 19: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 20: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 21: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 22: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 23: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 24: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 39: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table TESTLD:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255936 bytes(62 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 51
Total logical records rejected: 51
Total logical records discarded: 0
Run began on Tue May 23 11:04:28 2006
Run ended on Tue May 23 11:04:28 2006
Elapsed time was: 00:00:00.14
CPU time was: 00:00:00.01
[oracle@casanbdb11 sql_loader]$
Here is the control file:
LOAD DATA
INFILE issue_fact.csv
REPLACE
INTO TABLE TESTLD
FIELDS TERMINATED BY ','
ISSUE_KEY,
TIME_DIM_KEY,
PRODUCT_CATEGORY_KEY,
PRODUCT_KEY,
SALES_CHANNEL_DIM_KEY,
TIME_OF_DAY_DIM_KEY,
ACCOUNT_DIM_KEY,
ESN_KEY,
DISCOUNT_DIM_KEY,
INVOICE_NUMBER,
ISSUE_QTY,
GROSS_PRICE,
DISCOUNT_AMT,
NET_PRICE,
COST,
SALES_GEOGRAPHY_DIM_KEY
)

Need help on sql loader error

A similar issue is posted on http://www.dbforums.com/database-concepts-design/927987-using-sql-loader-load-data-multiple-files.html, but not a solution yet there, any help on this issue is highly appreciated.
an alternative solution is also appreciated?
Thanks!
Hi All,
I have a peculiar error while I try to load 2 tables(table name: enroll_emp_back & enroll_dep_back) using SQLLDR, the source file is a .csv file.
CTL FILE CONTENT:
LOAD DATA
TRUNCATE
INTO TABLE enroll_emp_back
WHEN (1:8) = 'EMPLOYEE'
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
(type NULLIF type= BLANKS,
enrollstmt_ctl_cust_seqnum NULLIF enrollstmt_ctl_cust_seqnum= BLANKS,
pctl_employee_seqnum NULLIF pctl_employee_seqnum= BLANKS,
pctl_lot NULLIF pctl_lot= BLANKS,
pctl_counter NULLIF pctl_counter= BLANKS,
first_name NULLIF first_name= BLANKS,
last_name NULLIF last_name= BLANKS,
mi NULLIF mi= BLANKS,
ssn NULLIF ssn= BLANKS,
cssn NULLIF cssn= BLANKS,
emp_id NULLIF emp_id= BLANKS,
pin NULLIF pin= BLANKS,
addr1 NULLIF addr1= BLANKS,
addr2 NULLIF addr2= BLANKS,
addr3 NULLIF addr3= BLANKS,
city NULLIF city= BLANKS,
state_cd NULLIF state_cd= BLANKS,
zip NULLIF zip= BLANKS,
country NULLIF country= BLANKS,
birth_date NULLIF birth_date= BLANKS,
hire_date NULLIF hire_date= BLANKS,
adj_service_date NULLIF adj_service_date= BLANKS,
elig_date NULLIF elig_date= BLANKS,
smoker_ind NULLIF smoker_ind= BLANKS,
spouse_smoker_ind NULLIF spouse_smoker_ind= BLANKS,
partic_grp_id NULLIF partic_grp_id= BLANKS,
enroll_window_start NULLIF enroll_window_start= BLANKS,
enroll_window_end NULLIF enroll_window_end= BLANKS,
total_ee_cost NULLIF total_ee_cost= BLANKS,
total_er_cost NULLIF total_er_cost= BLANKS,
emp_custom1 NULLIF emp_custom1= BLANKS,
emp_custom2 NULLIF emp_custom2= BLANKS,
emp_custom3 NULLIF emp_custom3= BLANKS,
emp_custom4 NULLIF emp_custom4= BLANKS,
emp_custom5 NULLIF emp_custom5= BLANKS,
custom1 NULLIF custom1= BLANKS,
ctl_ins_dttm NULLIF ctl_ins_dttm= BLANKS,
ctl_upd_dttm NULLIF ctl_upd_dttm= BLANKS,
ctl_trans_seqnum NULLIF ctl_trans_seqnum= BLANKS,
ctl_upd_seq NULLIF ctl_upd_seq= BLANKS,
ctl_deleted_ind NULLIF ctl_deleted_ind= BLANKS,
ben_year NULLIF ben_year = BLANKS,
activity_id NULLIF activity_id= BLANKS,
client_name NULLIF client_name= BLANKS,
doc_type NULLIF doc_type= BLANKS,
environment_type NULLIF environment_type= BLANKS
INTO TABLE enroll_dep_back
WHEN (1:9) = 'DEPENDENT'
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
(type NULLIF type= BLANKS,
enrollstmt_ctl_cust_seqnum NULLIF enrollstmt_ctl_cust_seqnum= BLANKS,
pctl_employee_seqnum NULLIF pctl_employee_seqnum= BLANKS,
pctl_enroll_dep_num NULLIF pctl_enroll_dep_num= BLANKS,
pctl_dep_num NULLIF pctl_dep_num= BLANKS,
first_name NULLIF first_name= BLANKS,
last_name NULLIF last_name= BLANKS,
ssn NULLIF ssn= BLANKS,
birth_date NULLIF birth_date= BLANKS,
relation NULLIF relation= BLANKS,
sex NULLIF sex= BLANKS,
student_ind NULLIF student_ind= BLANKS,
disabled_ind NULLIF disabled_ind= BLANKS,
ctl_ins_dttm NULLIF ctl_ins_dttm= BLANKS,
ctl_upd_dttm NULLIF ctl_upd_dttm= BLANKS,
ctl_trans_seqnum NULLIF ctl_trans_seqnum= BLANKS,
ctl_upd_seq NULLIF ctl_upd_seq= BLANKS,
ctl_deleted_ind NULLIF ctl_deleted_ind= BLANKS,
den_covered NULLIF den_covered= BLANKS,
deplife_covered NULLIF deplife_covered= BLANKS,
empadd_covered NULLIF empadd_covered= BLANKS,
med_covered NULLIF med_covered= BLANKS,
supadd_covered NULLIF supadd_covered= BLANKS,
suplife_covered NULLIF suplife_covered= BLANKS,
vis_covered NULLIF vis_covered= BLANKS
Error I get:
Table ENROLL_DEP_BACK:
0 Rows successfully loaded.
0 Rows not loaded due to data errors.
1 Row not loaded because all WHEN clauses were failed.
1 Row not loaded because all fields were null.
I dont know why the 'ENROLL_DEP_BACK' table is not getting loaded. If i change the above ctl file in such a way that it first loads ENROLL_DEP_BACK table, then the 'enroll_emp_back' table is not getting loaded.
Please help me on this?
Source File:
EMPLOYEE,2322,181340,1,1,Gervaise,Babic,,704345064,704-34-5064,10223914,12345,123 Felton Street,Building 1,Suite 1,Marlborough,WI,53121,USA,11-May-60,9-Mar-09,7-Jan-04,1-Jan-07,N,N,FTNES,15-Apr-09,22-Apr-09,$0.00 ,$96.78 ,9-Apr-09,,,,,,15-Apr-09,15-Apr-09,1103597,4,N,2009,OE,NESTLE,ENROLL,D
DEPENDENT,2322,181340,1,1,Antony,Broking,765304168,4/26/1962,SP,M,N,N,15-Apr-09,15-Apr-09,1103597,1,N,N,N,N,N,,,N
SQL command used: SQLLDR wedb/wedbo@nestle_10_sd1 CONTROL=AENUSA2.ctl data=ENROLL.csv LOG=AENUSA.log DIRECT=y
Thank You
Edited by: HarinathArasu on Oct 7, 2009 6:26 AM
Edited by: HarinathArasu on Oct 7, 2009 7:17 AM
Edited by: HarinathArasu on Oct 7, 2009 8:24 AM
Edited by: HarinathArasu on Oct 7, 2009 8:24 AM

When this error occurs it usually means there's some underlying schema changes taking place when you're trying to add a new article
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Itunes wont load due to java scriptcore.dll what do i do, itunes wont load due to java scriptcore.dll what do i do

Suddenly itunes stopped loading. I uninstalled it and tried to reinstall it but it wont load saying the Java sript core.dll is not valid. What do i do to fix this? And will i be able to get my downloads back?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Need help regarding icon loading

can i get help regarding icon loading in oracle forms???

ok make a folder name it icons and copy all u r gif icons and paste in the same folder(icons) and then copy the icons folder and paste in
D:\DevSuiteHome_1\forms\java\oracle\forms
when u want to display icon then do not use .gif(Note: sometimes also works with .gif) and one thing more becare about capital letter of gif-icons.it should be in small letter.i hope u understand.
sarah

HELP NEEDED! Browser wont load!

Hello, I have the Blackberry Curve 3G. I am on contract and never had any problem with my internet or browser.
I have had this problem for about a week now, everytime I use my track pad to click on the 'browser' icon nothing comes up, I have tryed to hold down the track pad so that 'launch' would come up, but still my browser will not come up. I rang up where I bought the blackberry from and they told me to do a system update, which I tryed but apparently I have the new software that is avaliable? What else could I do?
Blackberry user in need of help!

Hello Ellamurray31,
Please Open browser and click on Menu (Blackberry Sign) > Option > There will be a option to clear cache and cookies, please perfrom a cache and cookies clear. After cache and ookies clear pull out battery, while device is on and re-insert battery after a min.
This may help you to come out of the issue.
Good luck

Dreamweaver wont load??

Hi, I've recently installed te trial version of Dreamweaver
8, whcih I've been using with no problems. However as soon as I
moved the Dreamweaver launch icon to my desktop and double click to
open, it wont. It comes up with aan error but doesn't actually say
anything, you can only click ok, which then closes the launch. When
I put the icon back in my applications folder, it works fine?? any
thoughts?
Cheers
Phil

Delete the Cache folder.
On my system it is located here:
C:\Documents and Settings\ace\Application
Data\Macromedia\Dreamweaver
8\Configuration\SiteCache
"Waggs_55" <[email protected]> wrote in
message
news:et24ev$rbc$[email protected]..
> My Dreamweaver program will not load any more its saying
that its loading
> the
> catche file but then after waiting a while the program
stops responding
> and I
> have to go into task manager to delete it is there
anyone out there that
> can
> help me open my dreamweaver
>
> Thanks
>

New to Photoshop (CS4Ext) and need help with basic loading of images to new folder.

Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon. I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select and separate out some of interest to manipulate and share or get ready to print. It 's the most basic help one can need butI'm jut not clear on the workflow steps . Would appreciate someone walking me through the steps .
Thanks much

drmjp2 wrote:
Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon.
Let's see… First of all, this is the Photoshop Macintosh forum. Installed applications never, ever show up on your desktop as a "quick entry" icon on a Mac. Are you on a Windows PC maybe?
drmjp2 wrote:
I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select and separate out some of interest to manipulate and share or get ready to print.
Just select them with your mouse in the Finder and drag-copy them into the new folder. Done.

Need help in Sql Loader

Hi sir, i have one file
cointer header,batch and transactions
for example,
0PUAP03 071001721110000012000000037558 (header)
1200707103137000000010104 (batch)
2200707103137000000002845014D218499280101 10771450000 (transaction)
2200707103137000000007259014D506656680103 10770610000 (transaction)
1200707103108000000027454 (batch)
2200707103108000000005386014A100048730103 10084780000 (transaction)
2200707103108000000000856014D206225790303 10085530000 (transaction)
2200707103108000000002730014D206332650110 10084110000 (transaction)
2200707103108000000008783014D206805730207 10084730000 (transaction)
2200707103108000000003687014D207862300207 10084540000 (transaction)
2200707103108000000003282014D924725690206 10083910000 (transaction)
2200707103108000000002730014H912454050201 10084220000 (transaction)
Batch and transactions will be repeated
I want to use sqlloader to load into 3 tables,header,batch and transaction in one shot,
for header first characther is 0, for batch first characther is 1 and for transactions is 2
i need to use running number
for example
i have
header(header_id,date,...)
batch(header_id,batch_id,..)
transaction(header_id,batch_id,transaction_id..)
if i use this
when (1:1) = 0 {
header_id hdr_run.nextval
when (1:1) = 1 {
header_id hdr_run.currval
batch_id batch_run.nextval
when (1:1) = 2 {
header_id hdr_run.currval
batch_id batch_run.currval
transaction_id trans_run.nextval
if i do like above and if i do each one line is commit then its works but i dunt want it commit in each line,if we not commit in each line then different transactions goes under different batch,so any other idea ,please
i need it
thanks in advance

maybe this example might be of some help.
Load
Infile datafile.txt
Append
Into table dept
    when deptno !=''
    (deptno position(1:2) char,
     dname position(4:6) char,
     loc position(8:10) char)
Into table emp
    when empno !=''
    (empno position(12:13) char,
     ename position(15:19) char)

Need help - How to load data which contains \r\n

Hi All,
We have a requirement wherein we need to load the data from a .dat file, with fields separated by | symbol and the line separator specified as '\r\n'
INFILE '/scratch/xyz/abcd.dat' "STR '\r\n'"
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
Can you please help us load data which contains multiple lines in a single field to a database table field , keeping the line separator in ctl file as '\r\n' itself.
When we try bringing the '\r\n' within a text field enclosed in "" , the '\r\n' , sqlldr considers it as the end of that record and not as a data which needs to go into a column.
One option we have is to have the extraction process create the data in such a way that the fields with multiple lines , be brought in the .dat file enclosed in "" as
"Test
"|8989|abcd
where the new line in the first field is just '\n' .
Is there any other way in which the requirement can be addressed.
Version: SQL*Loader: Release 11.1.0.7.0
Thanks,
Rohin

In addition, you would need to know the character set encoding of the csv files (e.g. the code page used).
Basically you need to have the facts about both client (csv file) and database character set.
As suggested, use the available documentation - it's there to help you!
http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch2charset.htm

Really need help with a loading screen

Ok, here's my problem, I'm making a puzzle game and I can't seem to make my loading screen work with my main menu. The loading screen is represented by an image filling up with colour where the colouring takes place by means of a thread (and there's a string as well that paints the %) . Now the loading screen is supposed to appear after i click the start button from the main menu and after completely filling up (or when the tread dies) the game panel is suppposed to be show on screen. Between the loading I initialize all the components for the game. Now, when I press the start button, the whole screen freezes (for the duration of the loading thread) after which the game screen appears. What puzzles me more is that if i don't add the game screen the loading screen works like a charm.
Here's some of the code:
public void actionPerformed(ActionEvent e){
if(e.getActionCommand().compareTo("Start")==0){
//initializing the panel for the loading
ds=new Load();
//initializing the thread that makes the panel rainbow dream
anm=new Ompy();
x.remove(pent); //pent is the jpanel containing the main menu with the customised buttons, and x is the reference to the current JFrame's content pane
x.add(ds);
pack();
/* MediaTracker tracker=new MediaTracker(this);
tracker.addImage(ds.pic.im,2); //i tried using a media tracker to wait for the image of the loading jpanel
tracker.addImage(ds.fill.im,2);
try{tracker.waitForID(2);}
catch(InterruptedException ie){} */
anm.start(); //i start the thread
//without the folowing code the loading screen works perfectly
some code
Winx gs=new Winx(); //the panel containing the game interface
some code
while(anm.isAlive()){}
x.remove(ds); // i remove the loading screen
x.add(gs); //i add the game screen
anm=null;
ds=null;
setVisible(true);
gigaslave.requestFocusInWindow();
pack();
//here ends the code that shadows my loading screen :((
else {System.exit(0);}}
}I appreciate your help.

Thanks for all your help ...this is what i have so far and am working with:
import javax.swing.JOptionPane;
public class TVRemote{
     int volume = 5;
     int channel = 5;
     public void channelUp(){
          if(channel < 25){
               channel++;
     public void channelDown(){
          if(channel > 1){
               channel--;
     public void volumeUp(){
          if(volume < 10){
               volume++;
     public void volumeDown(){
          if(volume > 1){
               volume--;
public class VCRemote extends TVRemote{
     String tape = null;
     String mode = "Stop";
     public void insertTape(String t){
          tape = t;
     public void ejectTape(){
          tape = null;
     public void setMode(String m){
          mode = m;
     public String getMode(){
          return mode;
public String getMode(){
          if(tape == null){
               System.out.println("There is no tape");
          return mode;
I know it does have to be set as 2 files....I still need to put in a rewind and fast forward option would that be done the same way that public void insetTape is done? also I was wondering how i will interface it with the user? Cause the only output i see is a display message that there isn't any tape in the vcr.
Thankgs again for everyones help.

I need help with AppleScript for changing the font on numerous PowerCADD files

I am currently trying to write an AppleScript, but I really have no idea how one is written. I have looked up many tutorials, but to no avail.
What I'm trying to so is write a script that will take all my selected PowerCADD files, open them, change the font to Helvetica, then save the file. I have over a thousand files to do this to. So, you can see my need of an AppleScript to get this task completed.
If anyone out there knows how I would write this script, please submit it here.
Thank you so much for your time and help.

If anyone could help, that would be awesome =)

Need help. Dreamweaver wont load due to font.

Similar Messages

Maybe you are looking for