Need help editing and exporting using Final Cut Express - why does video end up with judder?!!

I've imported material from my JVC HD Camera and have edited a 52 minute sequence on Final Cut Express. I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
I've tried using iDVD to export but as you can imagine, the quality is not great. There's a judder on it. I have no idea where to start with using applications like MPEG Streamclip to convert the clip so that when it does get on to DVD, it doesn't judder. Can anyone help? This is driving me insane!!

I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
First step - just use this export as the import into iDVD. iDVD will take care of the necessary encoding to fit it on a DVD disk. The file size is of no concern; the only concern is the length (in time) of the video ... iDVD can fit about 2 hours of video on single layer DVD media; about 4 hours on dual-layer DVD media.
Regarding the judder, this is not specifically an iDVD issue. Do you see the judder when you play the video in the FCE Canvas window?

Similar Messages

When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

Because your clip properties do not match your sequence settings.
It will help a lot if you provide details ...
FCE Easy Setup
Sequence settings (vid rate, frame size, compressor)
Source of your clips (camcorder make/model, etc)
Clip properties (vid rate, frame size, compressor)

Created project using Final Cut Express 4, can I open it with Final Cut Pro

Created a short video using Final Cut Express 4, will my teacher be able to open this project up with Final Cut Pro???

Depends on exactly which version of FCP your teacher is using.

I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

I use Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V.
How do I import from camera to Final Cut without going through the intermediate step of using iMovie?

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it.

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo

Try outputting it as a MP4 or M4V
If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version.

I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

thanks I was afraid of upgrading to Pro X and having to redigitise all that footage again thx Tom

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

Exporting to FLV Using Final Cut Express

I am using Final Cut Express 4.0 to edit my full HD film footage (29.97fps 1920x1080HD). The final film will be uploaded to my website for viewing. I will be hosting my own videos and using my own player. I need to get the videos to .flv format for easy web viewing. Unfortunately, I have learned the hard way that FCE doesn't export to FLV nor does it predict your export file size. What a shame! My videos are 7.5 minutes long, so the files are large. Currently, I am using a two 3rd party free video converters. The first provides me more flexibility in compressing my video using H.264. I reduce the resolution to 1280x720HD for a reduced file size. Next, I use the other converter to take the compressed file and convert it to FLV. This is where the video becomes unbearable. I received better conversions when I uploaded to YouTube and allowed them to do it. The purpose for me trying to compress and encode the videos myself was to improve the quality of my videos on the web. Feedback I have received was that my free encoders aren't good. It has been suggested to me that I purchase Adobe Flash CS4 to convert to FLV. My problem is I don't want to spend $700 to convert a video. Do I have any other viable options?

Jason Castellani wrote:
I am using Final Cut Express 4.0 .. 29.97fps 1920x1080HD .. 7.5 minutes long .. using a two 3rd party free video converters. The first provides me more flexibility in compressing my video using H.264. I reduce the resolution to 1280x720HD .. use the other converter to take the compressed file and convert it to FLV. ..
no need for converter #1, .. the zillions of options in FCE's 'Export using QT'-dialog allow same settings..
450sec of 720/30fps material will create STILL huge files .. the point for setting the 'quality' is the socalled bitrate; e.g. famous tool VisualHub (not avail anymore) allowed a manual setting, to find a mix of size vs. pic quality. .. check your converter tool, where and how to set the bitrate. but: the better, the bigger ..
I dare to say, even the mentioned elaborated tools don't do wonders.
consider downsampling the framerate by half to 15 (in the 'Size' dialog on Export from within FCE).
consider an even smaller res 960x540 ..
don't forget to de-interlace for web-deilivery (reduces file size a lil'..)
downsize audio sampling rate to 22kHz.. mono .. saves a few MB ..

Do I need a blu ray burner to burn HD using Final Cut Express?

I just wanted to ask a question. I am new to burning after editing is complete. I am using Final Cut Express and have recorded my footage in HD. After trying to burn a disc using IDVD I realized it does not burn HD. So to be clear, in order for me to burn my HD finished sequences and have them be HD I need to purchase a blu-ray player?....also everyone keeps talking about Toast, what is this and do I need it to burn HD. Any advice would be much appreciated.
Thank

ANY DVD player cannot play HD content no matter what media it is on. HD content needs HD decoder and other circuitry and S/W which is not present on standard DVD player, just like standard definition TV cannot play HD programing. HD content has to be down converted with application such as iDVD to play on ANY DVD player, at which time it is no longer HD of course. In order to play high definition disc, you'll need HD content on HD media, blu-ray player and HDTV.
Message was edited by: ComPH1

Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

Using Final Cut Express for video editing without attaching external device

Hello,
I am a newbie to Final Cut Express as well as Mac's in general. I am wanting to use Final Cut Express for video editing of files, but without an attached camera. Is there any way to have Final Cut Express startup without having it prompt for an external A/V device? I just want to do some basic editing and use the chroma key feature. Can anyone help?
Greatly Appreciated,
Knight2000
iMAC Mac OS X (10.4.9)

Hi Zak,
Unfortunately, I've tried that and I get into an issue that was addressed in this posting: http://discussions.apple.com/thread.jspa?threadID=836595&tstart=120 where FCE will show the splash screen and then the program doesn't start. I then have to delete FCE preferences and then I will get the Easy Setup dialog box prompt me again for choosing the external device.
I am looking for a way to use FCE for video editing of files that I already have on my computer that I created using iClone software and is in .avi, or .mp4 format. I get FCE to work one time without the external device actually being attached, but then when restarting the program I get the dialog box asking for the external device and if it's not there, the program just closes, and to get it to work again, I have to delete the preference files and go through the process all over again which is time consuming especially when this is at work. If FCE is not the right program, can anyone suggest a good video editing program that doesn't require an external device and is as good or better than FCE?
Thanks again for your help and support,
Knight2000
iMAC Mac OS X (10.4.9)

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version

Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

Need help editing and exporting using Final Cut Express - why does video end up with judder?!!

Similar Messages

Maybe you are looking for