Need help enabling PCI Express graphics slot on HP envy 700. HELP!

Hello, My name is Patrick. Im 14 and I need sombodys help. Before you finish reading and your about to leave a suggetion for me, Im ONLY 14 and im not that good with cpu WORDS. For instince, I had to search up what the pci express graphics slot was xD. Last time i tried to do this i had to call mutiple numbers that led me to breaking my cpu. If anybody could leave STEP-BY-STEP instructions to enable that pci express graphics i would be very appretiated. Now here are the things i know for sure. This craphics card is a Geforce 650 graphics card that i know for a fact can work on my Hp Envy desktop. I have enought power suplyage to power sed Graphics card. So I already know how to insert the card, But thats pretty much it. I dont know if i have to have the External graphics card in while enabling the pci graphics. So Please be very discrptive while you answer this. I have already failed once, and had to send in my cpu to the repair station in hp. THAT TOOK 15 DAYS! It is expose to be on my front porch in 2 days. The grapics card is a $115 dollar item that i do not want to return because it seems that it can improve my frames while playing my Video games. So if anybody could help me with this i would be very thankful. Just leave the steps down below in VERY discriptive words that a 14 year old would understand. Thank you. Lastly I know what the bios is and also how to get there. Thats is all, THANKS YOU I forgot to tell you. The BIGEST PROBLEM I HAD IS whenever i plugged in my graphics card it would show a black screen on my moniter as i would boot it  Up. I need help getting that picture

Hi:
Did you change the required BIOS settings before you installed your new video card?
If not, please follow the instructions at the link below...
http://support.hp.com/us-en/document/c03653200
If that doesn't get the video card to work, unfortunately, I don't have any other suggestions for you to try.

Similar Messages

  • MOVED: Onboard graphic card simultaneous with PCI Express graphic card

    This topic has been moved to Off-Topic Technical.
    https://forum-en.msi.com/index.php?topic=161634.0

    Hi,
    The following link shows the specs of your machine:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03499587#N432
    It clearly says:
    *Integrated video is not available if a graphics card is installed.
    Supports PCI Express x16 graphics cards.
    Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
    You don't need to disable the integrated video chip (or onboard video).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MSI NF980-G65 PCI express x16 slot question

    i was rewiring my case so i could get some cables out of the way, and as i was removing my graphics card, i pressed too hard on the little blue tail on the topmost PCI slot (the one closest to the processor socket) and the tail fell off. it looks like a bit of plastic chipped off the actual slot where the tail connects to the board, but i'm not sure if there's any damage to the slot, or if the slot has anything that has been compromised. the chip off the pci express x16 slot does not reach into the slot itself, there's no hole in the slot, i dont believe any of the connectors are touched, but i could be wrong.
    here's a picture of the motherboard with the tail on the top PCI express x16 slot.

    Quote from: pkmntrainer on 10-March-11, 05:14:05
    to clarify,
    it's just there to help guide the card in place and it's not a tab that releases a mechanism which physically lock the card in place.
    its actually lock the card in a place, but will be fine without it as well,
    when its filled well into the slot and secured by the screws

  • I need to 'enable download pictures/graphics' in my Comcast email.

    I get no images or graphics in my Comcast email. I need to 'enable download pictures/graphics' I believe to fix this. Text within a blank graphics box stated this. I'm using Firefox version 27. Windows XP. Comcast email server. Graphics quite showing in my email several months back all of a sudden. I've cleared the cache and cookies. I believe I tried resetting Firefox to default settings. I could try this again. Don't remember if I did this before or after email graphic problems. Comcast tech support could not help me. Thank you.

    Cor-el, there are no links to the email images in Tools>Page Info>Media that I can see. When I right click the image placeholder and click Inspect Element, It shows line after line of what looks like code. No images loading are only a problem in my Comcast email. I've had three tech reps at Comcast try to solve it. None could. Websites load fine. Could the problem have something to do with my graphics card and driver? Thanks.

  • PCI Express Expansion Slots

    I noticed that the Mac Pro offers 3 extra expansions slots for PCI Express graphics cards. How is it possible to SLI three graphics cards with no nForce MCP? Are the other slots even usable and how can you combine four graphics cards with no Crossfire or SLI?

    SLI and Crossfire are not supported at this time.
    The possibility to run more monitors is there with the extra slots, but not to combine video cards for faster frame rates on a one monitor.
    It's not Apple's fault, it's the limited capabilities in the Xeon chipset supposedly, not all slots can be 16x. A pair can be 8x though.
    I lost the link where Ars Tech explains it.

  • MSI 890FXA-GD70 - Can you use all 6 PCI Express expansion slots at once?

    Hey all,
    I'm trying to figure out if it's possible to use all 6 PCI Express expansion slots on the motherboard (the 5 Full x16 slot and the 1 x1 slot) at the same time?  I know I'd lose the capability for x16 bandwidth but does using any of the slots automatically disable any of the other slots?  I have 6 single wide x1 PCI express cards I want to use at the same time and they do not all seem to be getting recognized by the OS (W7 x64).
    Specs on the machine are:
    890FXA-GD70 Motherboard - BIOS 1.9
    AMD Sempron 145 CPU
    4 GB DDR3 Kingston RAM
    WD 160 GB Blue SATA HD
    Win7 x64
    Thanks!

    Quote
    I have 6 single wide x1 PCI express cards I want to use at the same time and they do not all seem to be getting recognized by the OS (W7 x64).
    What cards are they?
    By not recognised is mean, not detected? driver conflict?
    Quote
    I know I'd lose the capability for x16 bandwidth but does using any of the slots automatically disable any of the other slots?
    • 5 PCI Express 2.0 x16 slots
    - PCI_E1 supports up to PCIE x16 speed (when PCI_E3 is empty)
    - PCI_E5 supports up to PCIE x16 speed (when PCI_E6 is empty)
    - If you want to install two graphics cards, please use PCI_E1 & PCI_E5 slots
    - PCI_E3 & PCI_E6 support up to PCIE x8 speed
    - If you want to install four expansion cards into PCI_E1, E3, E5 & E6 slots, these four PCIE x 16 lanes  will auto arrange from x16/ x0/ x16/ x0 to x8/ x8/ x8/ x8
    - PCI_E4 supports up to PCIE x4 speed
    All PCI-E slots can be filled at the same time with no problem.
    They will run at x8,x8,x4,x8,x8
    The question mark is the small PCI-E x1 slot.
    It's not clear if will affect others or will be disabled, or will work fine with x1 speeds as adverted.
    What hapends if you fill 5x of those cards into the five of the PCI-E slots, except the small PCI-E x1 slot?

  • Full length pcie express 2 slot for fx soundblaster

    Can I use pcie express 2 slot for fx soundblaster. There are no small pcie slots on my H87M Pro4 asrock motherboard. I have a GTX760 Nvidea video in the first slot which is a pcie express 3. Also have an empty pcie express 2 full size slot available.

    Originally Posted by dinopkk
    You can use the PCI-Ex 2 slot for your sound card according to jmacguire in this thread http://forums.creative.com/showthread.php?t=710433&page=2
    Thank you for your reply. I will go ahead and install my sb card without worrying about wiping it out.

  • H530 - Variant: 57324689 PCI Express expansion slot ?

    Hi there.
    I can´t figure out if the expansion slot on board is a "real" pci express, or if perhaps it is something different..
    Can you pleace help me ?
    I need to fit a Firewire pci-express card or adapter of some sort to my computer...
    And the cheapest i have found is a firewire pci express card...
    The reason i ask, is that i can see H530 type computers with 3 pci-express slots, but my computer has only one ?!?
    And also i see something about that slot is only for some kind of wan card ?!?
    So i am a little confused...
    Pleace help me
    Kind Regards
    Peter

    hi pshdo,
    Welcome to Lenovo Community Forums!
      Can you take a photo of your mainboard slots.
    the reason is, Your system board might be different from this photo i found for H530,
        but if it is the same then, here it is
    Your system has 1 PCIE x16 most likely for GPU or Graphics card.
    Then you have this three small PCIE x1.
    check if that firewire adapter supports PCIE x1 then you good to go,
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • No way to enable PCI-E graphics

    Hopefully this is in the right place, not sure where to post BIOS questions. This seems to have been asked a lot around the net, however, there doesn't seem to be an adequate answer to it.
    I am running:
    Operating system is Windows 7Motherboard is Acer Veriton M6610G (Marked with Q67H2-AM v1.1).
    Bios is ACER ver. 2.10.1207
    GPU is GTX 770
    PSU is 700w
    The Graphics card is plugged in to the 16x slot, the fans spin, but no display and no device is recognized in device manager.
    I have tried a few solutions including uninstalling my onboard graphics driver from the device manager and going to upgrade my 600w power supply to a 700w one.
    I think the issue is that I need to change the BIOS to PEG or PCI Express. However, in the Bios the settings for both "Primary Video" and "Onboard Graphics" are grayed out, meaning that I can't change them.

    CrazyFoolMrT,
    It sounds like you are using the most up to date BIOS we have posted for that model. Since the BIOS you are using is LEGACY, you will need to make sure the video card you are using supports that type of BIOS and not UEFI only. There are video cards that support only LEGACY, only UEFI, and both.

  • Z68A-G45 (G3): BIOS screen unreadable on PCI express graphics card

    I have a Z68A-G45 (G3) board with Intel Core i3-2320T processor.  BIOS version is E7750IMS v11.2.
    When entering the BIOS setup screen with DEL, everything is fine when the display is connected to the motherboard HDMI port.
    When I plug in my MSI Nvidia 8500GT-based PCI express video card and connect the display to its HDMI (or DVI) port, the BIOS screen is corrupt and almost unreadable.  I can see some characters and images -- the BIOS is there, I can see the temperature readout -- but navigation is very difficult.  This problem occurred with BIOS version 11.0; I just flashed to 11.2 and the problem persists.
    Here's what it looks like
    Can anyone help?
    Thanks,
    Steve

    In case anybody's curious it turns out the issue was specific to the card.  I tried a different PCIe card and the BIOS screen showed up fine.
    So finally I ditched my old reliable nVidia card and used the Sandy Bridge integrated graphics instead.  No problems so far.

  • What version is my PCI Express x1 slot?

    I have an HP Pavillion m9500t.  What PCI Express x1 version does this PC have?

    Hi:
    According to the chipset specs from Intel, it has a PCI express revision of 1.1.
    http://ark.intel.com/products/31914/Intel-82G33-Graphics-and-Memory-Controller

  • K9N6PGM2-V COMPATABLE PCI EXPRESS GRAPHICS CARDS?

    Could anyone tell me what graphics cards best suit this mother board for about £40....Thanks

    In that price range, any PCI-Express card should work.

  • Defective Tecra S11 - Need new notebook with Express-Card-Slot

    My TECRA-S11-166 is faulty.
    I need a new Notebook with *Express-Card-Slot* and (if its possible) RS232.
    What kind of Notebook comes with a Express-Card-Slot ?

    Hi
    There are different Toshiba notebooks on the market and Toshiba releases new models in very short intervals.
    I would recommend you to visit the Toshiba notebook product page and to compare the available series and models.
    The Tecra laptops offer a business professional use and Portege series are very best in mobile computing.
    The Satellite series are entertainment machines designed to provide exceptional all-round performance.
    http://www.toshiba.eu/laptops/

  • Need very high PCIe throughput in your next design? Get help using Xilinx UltraScale, UltraScale+ devices in new White Paper

    The Xilinx UltraScale architecture has many features that make implementing high-performance PCIe designs possible. Each of the integrated PCIe blocks in Xilinx Virtex UltraScale+ and Kintex UltraScale+ devices can transfer more than 14Gbytes/s in each direction sustained throughput when configured to operate as PCIe Gen3 x16 or Gen4 x8 port using a 256-byte system Maximum Payload Size and most UltraScale and UltraScale+ devices incorporate more than one such integrated PCIe block.
    The transceivers in Xilinx devices based on the UltraScale architecture contain features that allow for very robust operation at these high PCIe data rates. These features include:
    Transmitter emphasis/equalization
    Auto-adaptive equalization
    In addition, most PCIe applications use some type of high-speed memory for data buffering. Here again, Xilinx UltraScale and UltraScale+ devices provide for robust PCIe designs by supporting high-speed DDR4-2400 and DDR4-2666 SDRAM.
    A new Xilinx White Paper, “PCI Express for UltraScale Architecture-Based Devices” (WP464), discusses these topics in much more detail.
     

    The Xilinx UltraScale architecture has many features that make implementing high-performance PCIe designs possible. Each of the integrated PCIe blocks in Xilinx Virtex UltraScale+ and Kintex UltraScale+ devices can transfer more than 14Gbytes/s in each direction sustained throughput when configured to operate as PCIe Gen3 x16 or Gen4 x8 port using a 256-byte system Maximum Payload Size and most UltraScale and UltraScale+ devices incorporate more than one such integrated PCIe block.
    The transceivers in Xilinx devices based on the UltraScale architecture contain features that allow for very robust operation at these high PCIe data rates. These features include:
    Transmitter emphasis/equalization
    Auto-adaptive equalization
    In addition, most PCIe applications use some type of high-speed memory for data buffering. Here again, Xilinx UltraScale and UltraScale+ devices provide for robust PCIe designs by supporting high-speed DDR4-2400 and DDR4-2666 SDRAM.
    A new Xilinx White Paper, “PCI Express for UltraScale Architecture-Based Devices” (WP464), discusses these topics in much more detail.
     

  • Can i install nVidia PCI express graphics card on a ATI X200 motherboard

    Is ATI X200 motherboard compatible with nVidia PCI Xpress graphics card(Gforce 6series card)?
    My system configuration
    AMD Athlon 64 3200+
    ATI XPRESS 200 RS482M2 Series  Motherboard
    512 MB DDR RAM

    It is indeed my friend, I have put an NVidea G-Force 6600 PCI-E in a MSI RS482M-IL Motherboard (using the ATI Chipset) and it works a dream  , not a problem.  The only advantage of using an ATI card is that the catalyst drivers on the CD for the motherboard works with the card! 

Maybe you are looking for