Need help - Error Code "2SVM/1/2: CPU BO VOLTS"

Hello,
My older PowerMac G5 Quad (Late 2005 model) has issue - CPU funs are spinning very fast.
Checked with Hradware Test.
It saysError Code: 2SVM/1/2: CPU BO VOLTS
Also LED #2 and #7 are RED.
Please help to identify the problem.
Thank you,
Taras Pelekh

Tarasik,
The most helpful information in those posts is staring you in the face in the very first link:  it's quite possible—even probable—that you are running the wrong version of AHT (Apple Hardware Test).
Are you 100% certain you're using the version of AHT that came with your particular machine?  AHT is highly machine-specific and you cannot use a version that came with the install media for another Mac.
I also suspect that another, very important clue is contained in the last version of BDAqua's first post. 

Similar Messages

  • Error code 2SVM/1/2:CPU BO VOLTS - anyone know why?

    Hi. My older G5 has shown an error code as above. The fan blows on high speed, the red light luminates from the front panel. And then shuts off. Anyone tell me what is wrong, can I fix it? Thanks

    Hello, have you blown the Dust out lately?
    That's a Voltage sensor issue, see...
    http://mac.bigresource.com/Power-Mac-G5-2-0-DP-Apple-Hardware-Test-Error-2SVM-1- 2-CPU-B-AD7417-AD3-PLTNJzO6q.html

  • Need Help - Error Code : 0x800F0922 I cannot Activate my IIS InetPub

    Hi All Windows Expert;
    Need your kind help.
    When I activate my webservice IIS, it prompt me an error 0x800F0922 and the Installation of the InetPub will not continue.Hoping for your kind help because I need to run my IIS webservice.
    I tried whatever on the internet already but still no result

    Hi,
    Try tcode RSKC perform the tests for the characteristics mentioned by you. Execute and correct errors if any and then try loading data.
    you can also go for error handling option in infopackage that the load should not fail if x number of errors should only fail when the records exceeds the number x.
    Thus it will ignore the number of records you give in error handling
    Thanks
    Puneet
    Edited by: Puneet Chawla on Jan 17, 2008 9:18 AM

  • Maestro need help also code is 75957252

    maestro need help also code is 75957252 for bios password reset
    This question was solved.
    View Solution.

    Try
    60635894
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Maestro need help also code is 75957252 for bios password reset

    maestro need help also code is 75957252 for bios password reset
    This question was solved.
    View Solution.

    Check your other post. I replied there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My iphone wont turn on or restore,HELP error code 1015

    My iphone wont turn on or restore,HELP error code 1015

    jailbroken? if so we can't help here, try google.

  • Need help - Error: MDN is not found (code: 33)

    Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
    I have a galaxy s3
    Subject line edited into post.
    Message was edited by: Admin Moderator

    Make sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates.  Once the updates have been installed you will not receive the error "MDN is not found (code: 33).  You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
    Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion!

  • Trying to create a Invoice based on Order need help Error -5002

    the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
    I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
    here is my code
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 0
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00001"
    oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
    'adding Line
    oInvoice.Lines.Add
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 1
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00002"
    oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
    'adding Line
    oInvoice.Lines.Add
    lRetCode = oInvoice.Add
    If lRetCode <> 0 Then
        gObjCompany.GetLastError lErrCode, sErrMsg
        MsgBox (lErrCode & " " & sErrMsg)
    End If

    Indika,
    Only set your base types...
    (not items & description)
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 0
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00001"
    oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
    'adding Line (to fill the second item line)
    ' the 1st line item is there by default
    oInvoice.Lines.Add
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 1
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00002"
    oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
    'DO NOT Add THIS line
    ' (only if you want to add a 3rd line item)
    '''oInvoice.Lines.Add -> Don't add this
    lRetCode = oInvoice.Add
    If lRetCode <> 0 Then
        gObjCompany.GetLastError lErrCode, sErrMsg
        MsgBox (lErrCode & " " & sErrMsg)
    End If
    remember to add :
    oInvoice.CardCode = "your BP"
    oInvoice.DocDueDate = Now
    oInvoiceDoc.CardCode = txtDOCBPCode.Text

  • Help error code 7 opengl crash

    I get this when Premiere pro CS5 crashes :
    Your hardware  configuration does not meet minimum specifications needed to run the  application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7
    I think its becose of a large image that I am using. But I need it large to zoom out.
    Anyone else has that problem? Any fixes?
    I have the latest updates and last drivers  for my GTX 460

    Updates:
    Now cuda is not even loading. All projectrs that I open say that the projecgt was last using mercery engine playback (or said differently ) and now it will be without hardware acceleration.  So it's as if I dont have a valid GTX card.
    I am starting to regret selling my gtx 285 to upgrade with this one. But, might not be a fault in the card. Besides the crash from the large picture (the original problem) Any one has any idea why now Premiere does not detect, or use my card?
    Thanks
    I need to re-cut a documentary for a festival in April and I am heavy on After effect stuff and plug ins use.  I know hardware aceleration does not help with every types of effects but things are not playing smoothly at all. I guess I will have to lower the playback quality but with 24 G of ram, an i7 960 and Asus P6T pro mobo, raid cards... It should be a lot better then it is right now.

  • URGENT need help ERROR 0xc0000034

    Hello,
    Lastnight my laptop was updating the windows updates and this morning when I tried turning it back on I got a blue screen with the message Error code 0xc0000034
    I've read some in the forums and appareantly I need a recovery media or a windows 8 CD and I dont have any of those
    My laptop model is Satellite E45-B4200. I bought the laptop around july so is almost new.
    Please reply i am desesperate
    Solved!
    Go to Solution.

    Satellite E45-B4200
    According to Microsoft, trying and failing to boot several times will eventually take you to the recovery environment instead. According to Toshiba, you can also get there by pressing F2 or the zero key on powering up. 
    If you have completely shut down, Toshiba says you can get there using F12 to reach the UEFI boot menu and then selecting HDD Recovery. .
    Please try these out many, many times and let us know when you succeed. It looks like this.
    If you had created the recovery media on p. 45 of the User's Guide, we could use that.
       Satellite/Satellite Pro E40-B Series User’s Guide
    -Jerry

  • Need help for code

    Hi friends,
    I need help to get the java code to be used in netbeans 5.0
    I have to develop:
    1. Merge files using JFileChooser in netbeans 5.0
    2.Create files in the format .html, .doc, .pdf, etc
    3. Browse the file and attach to the MS Outlook
    Can anybody help me out plz to get the code for this or any reference from where I can understand the code for the same.
    Edited by: vinodmatlani81 on Oct 28, 2007 2:05 PM

    You must be using an old Google version, mine found lots of stuff:
    1. Merge files using JFileChooser in netbeans 5.0\\
    Depends on what you're merging, but here's Sun's basic IO tutorial: http://java.sun.com/docs/books/tutorial/essential/io/
    How to use the JFileChooser: http://java.sun.com/docs/books/tutorial/uiswing/components/filechooser.html
    2.Create files in the format .html, .doc, .pdf, etc\\
    For HTML, see the basic IO tutorial.
    PDF: http://www.lowagie.com/iText/
    DOC: http://schmidt.devlib.org/java/libraries-word.html
    3. Browse the file and attach to the MS Outlook\\
    http://www.sun.com/software/products/calendar_srvr/connector/index.xml

  • Error code : 2STH/1/3: CPU A AD7417 AD1 What does it mean?

    I get this error code while running AHT on my G5.
    2STH/1/3: CPU A AD7417 AD1
    AppleCare didn't have an answer immediately, I have to call back in a while. They guess it has something to do with the thermal management.
    Anybody out there who can give me a little more info?
    thx!

    AHT is a static program written on a read only medium. However Apple makes OS and firmware changes which render versions of AHT obsolete which if you run a older version sometimes you'll get errors.
    Not to say this is your particular problem, but it might be, so make sure first before spending the time and effort sending/delivering your machine somewhere just to find out nothing is wrong.
    Best to call and talk to a top brain at the Genius Bar first, they know what version is good for what OS/machine version.

  • Need password error code 03305

    Need pass code for mw hp dv2000 error code 03305
    This question was solved.
    View Solution.

    Hi,
    No, one OR the other, not all of them
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Apple Hardware Test Error Code     " 2STH/1/2:CPU A AD7417AD1 "

    Hi All,
    I have a G5 2.5 GHz dual processer that seems to work fine after 14 months. But when I run the Apple Hardware Test, I get the error message listed in my subject above. I talked to Apple and took the machine in for service. Servicer said get the latest upgrade of the AHD and try it instead of one that came with my machine. After some work (a good bit), I got Apple to send me the upgrade and when I run it, I still get the same error code! Does anyone have any suggestions? I could sure use them. Thanks,
    Chuck
    Powermac G5   Mac OS X (10.3.9)  
    Powermac G5   Mac OS X (10.3.9)  
    Powermac G5   Mac OS X (10.3.9)  
    Powermac G5   Mac OS X (10.3.9)  

    Although you do not have any symptoms(?) the same error was cause for concern here
    http://discussions.apple.com/thread.jspa?messageID=598444&#598444

  • Help, Error Code -36

    ok I keep trying to transfer large video files from an external Firewire hard drive to a my second internal hard drive. and after a while the file transfer stops because of Error code-36 It says "The finder cannot complete the operation because some data in "blank" could not be read or written. (Error code -36)"
    few things to point out
    All hard drives are formatted "Mac OS Extended (journaled)"
    The files are video files ".mov"
    The files are larger than 4GB
    and it freezes after transfering 1.97GB

    How is the external drive formatted, HFS or some windows format (FAT32 for instance)?
    Check [here|http://blogs.discovermagazine.com/badastronomy/2008/03/30/mac-os-tip-for- error-code-36] for a suggested solution, that may work.
    Also, try trashing the Finder's pref file in the folder /Users/Library/Preferences. Find the file "com.apple.finder.plist", send it to Trash (empty the Trash, if you want) and reboot.
    Also check the FW cable.
    /p

Maybe you are looking for