Need help-Error Message in HP Deskjet F4288 All-in-One

Please help why I am getting an 'E' in the 'Start Copy' Panel. The Power/Start button light is on and it is not blinking. The Colour Cartridge has red blinking light though it is almost full. The moment I switch on my Printer, I get 'E' and red blinking light only in Colour Print Cartridge. The Black Cartridge is showing its ink level. I had got my Colour Cartridge replaced just some time back. It's level should correctly display being higher than the Black one.
Troubleshooting : I have tried removing the Cartridge and reinstalling them. Though it showed the correct levels in both cartridges- Colour one being nearly double that of the Black, the moment I tried to print, it showed 'E' and again the red blinking light.

this is happening to me i have tried 3 new coour ink cartridges

Similar Messages

  • I receive a 0xc18a0301 error message on a Photosmart c5180 all in one

    I receive a 0xc18a0301 error message on a Photosmart c5180 all in one
    I try the reset prosedures listed on the hp website no solution work
    last option saids service the product
    what its the procedure if any to service the unit
    ATT
    Alex

    next time just said buy a diferent brand...

  • NEED HELP error messages - cannot install iTunes upgrade

    I'm running Windows Vista.
    I've been using iTunes for about a year, no problem.
    When I went to download the iTunes latest version I have had nothing but problems. I keep getting this error message on trying to install the upgrade for iTunes, and now I cannot even use iTunes:
    iTunes could not be installed because Visual Basic Script (VBscript) is not installed or has been disabled. Make sure VBscript is installed, turn off script blocking in anti-virus and personal firewall software, re-register VBscript, and then install iTunes.
    I have no idea what that message means and I need step by step directions on how to find out of perform whatever that message means.
    Your help would be GREATLY appreciated.
    Dell Optiplex   Windows Vista   VISTA for Business

    even though the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

  • Need Help: Error Message on MacBook Air

    Hello,
    My MacBook Air keeps showing the following error message after it is woken up from sleep:
    I do not have anything plugged in to the ports, and I have tried restarting and shutting down several times. I would appreciate any insight or solutions the community might have. Thank you!

    Hello S.W. Tyra
    That is interesting, especially since nothing is plugged in. I would start with resetting the SMC and NVRAM on your MacBook Air and then test it out. Let me know if this helps or if you are still having issues.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Regards,
    -Norm G.

  • Need help, error messages

    Error messages. Warning: Unresponsive plug-in. Shockwave Flash may be busy, etc.  This keeps coming up more
    frequently.  It does it mainly on my Yahoo home page and on Facebook Games.  I've had 4 different tech specialists
    try to fix this, unsuccessfully.  Another error message says, Your Adobe Flash Plug-in  has crashed.  I have a laptop,
    Windows 8.1, use Mozilla Firefox. Have installed the latest version of the Flash Player. Can you help me? Thanks. Mary

    I have had this same issue on a laptop and desktop. i have uninstalled, reinstalled, everything but format my machines.  I dont think this is my problem I believe it is an adobe issue.   I cant play facebook games or log on yahoo pages, my bank.   This has been a bad week so far.

  • Need help: error message in Log.

    Hi,
    I got the following error in log file when I open form in LC ES2 workspace. Does anyone solve it before?
    WARN  [com.adobe.document.XMLFormService] ALC-XTG-029-217: [2800] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
    Thanks.

    I zeroed in on this same error message today.  I can't tell you exactly what was causing it, but I can tell you exactly the object that was causing the issue.  It was a 1-row, 2 column table.  In one cell was some text that included hyphenation ("in-process").  In another cell was a drop-down menu with only two options defined: pass and fail.
    I noticed that as I was scrolling through the document, as long as this particular table was visible, I would get the same "bad hyphenation" message continuously, line after line, and once the screen threw up 8 lines of this same message at once.  But once I deleted the object, the error no longer appeared, and when I re-created the same table sans hyphen, no error messages.
    I must note that once the error message appeared, when I tried to work with the table-cells, the object no longer functioned as a joined table but instead worked like individual fields.
    My suggestion is to go through your document and look for table cells with hyphenated text, delete them completely and then re-type them without the hyphen included, and see if that takes care of the problem.  That's how I got rid of my error.

  • Re: Need help: error message "reached end of file while parsing"

    You are missing a closing brace "}" somewhere near the bottom half of your code.
    Edit:
    DrClap beat me to it.
    Edited by: Jin on Oct 2, 2007 1:33 PM

    well i just compiled the source that you have posted. it appears that you have declared a variable called "oper" within the Design method and tried to acces it from within the actionPerformed method (line 136). thats a scope error. one way to eliminate this error is to declare the oper var as global variable, i.e. along with the JButtons and stuff.
    another error is at the same place , the last if block. you might wanna use only the equals method like oper.equals("minus"). another way is oper.compareTo.("minus")==0.
    I believe this will hold for now. you may find the following stuff helpful, but probably you know this already.....
    In order to view your applet you can use an html that looks something like this
    <html>
    <body>
    <applet code="calc" width="400" height="400">
    </applet>
    </body>
    </html>
    to test it without a browser issue the command
    java sun.applet.AppletViewer app.html
    where app.html is the above html file and situated in same folder as calc.class file

  • Need help error message -42404

    Its saying something didn't download right but i dont know how to fix it. It took me 3 times to get the download to finish, help

    Could you post some minimal diagnostics for us please? (The list of installed components can sometimes give us a heads up on which component hasn't been installing.)
    In iTunes, go "Help > Run Diagnostics". Uncheck all four boxes, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • HELP! Issue with HP Deskjet F4180 All-In-One

    My black ink ran out and when I put in a new cartridge it refuses to print with black and only colour. I have removed all sticky tabs on the cartridge and it says that the ink level is full but its still not printing.

    hello,
    try to uninstall and reinstall the driver.
    keep me informed please...

  • How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

    I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

    Hi,
    What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
    For Android, please use the following app:
       https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

    I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer.  Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
    thanks,
    Natali

    Hello NatDeskjet2540,
    Welcome to the HP Support Forums!
    Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
    Hope this help, let me know.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Need help correcting message error number

    Hello, i need help correcting message number for running archiving test runs.
    05.08.2011 08:31:42 Message number 999999 reached. Log is full                                BL           252          E
    05.08.2011 08:31:42 Job cancelled after system exception ERROR_MESSAGE                        00           564          A
    Any help wopuld be appreciated.
    Regards.

    Summary
    Symptom
    One or several database tables of the application log contain too many entries.
    The following database tables belong to the application log:
    - BALHDR (all releases)
    - BALHDRP(< 4.6C)
    - BALM   (< 4.6C)
    - BALMP  (< 4.6C)
    - BALC   (< 4.6C)
    - BALDAT  (>= 4.6C)
    - BAL_INDX (all releases)
    Other terms
    RSSLG200,
    RSSLGK90,
    SLG2,
    application log,
    log
    delete,
    performance
    Reason and Prerequisites
    The application log is a tool to collect, save and display logs.
    Many different applications collect messages in the application log which contain information or messages for the end user. The application automatically log serves as a temporary storage for messages. The logs are written on the database but they are not automatically deleted.
    There is no general procedure for switching the application log on or off. Some applications provide this option or they offer the option of reducing the number of entries created. (See Notes 91519, 183960, 141244).
    The expiration date of application logs
    A log usually has an expiration date, which is set by the application, that calls the 'Application log' tool. If the application log does not set an expiration date, the 'Application log' tool sets the expiration date as 12/31/2098 or 12/31/9999,depending on the release, which allows the logs to stay in the system for as long as possible. The end user cannot set the expiration date. The expiration date does not mean that logs which have reached that date will automatically be deleted. It is used to control the deletion of logs when you call the Deletion report. The DEL_BEFORE flag in the BALHDR table determines whether or not the log can be deleted even before the expiration date is reached.
    DEL_BEFORE= SPACE means that the log can be deleted before the expiration date is reached. (Default value)
    DEL_BEFORE='X' means that the log can only be deleted after the expiration date.
    Solution
    Deleting the logs of the application log.
    Releases >= 4.6A:
    =====================================================================
    In Releases >= 4.6A, use Transaction SLG2.
    On the selection screen you can restrict the amount of logs to be deleted:
    The 'Object' and 'Subobject' fields specify the application area in which the logs were written (see F4 Help).
    The 'External Identification' field specifies the number which was          provided for this log by the application.
    o  If you also want to delete logs which have not reached the expiration date you must set the option "Also logs which can be deleted before the expiration date".
    Select 'Help with application' in Transaction SLG2 for further explanation of the procedure for deleting.
    SLG2 is a report transaction. The corresponding report is SBAL_DELETE. At regular intervals, this can be scheduled as a background job.
    Releases < 4.6A:
    =====================================================================
    For Releases < 4.6A, note the following instructions:
    In general, the deletion of application logs can be carried out in two steps:
    1. Report RSSLG200: Deletion of all logs which expired:
    Use report RSSLG200 to delete all logs whose expiration date is reached or exceeded. (This report is not yet available in the standard in Release 3.0F. In this case, the report can be installed in advance; see corrections attached to this note).
    As of Release 3.1H, Report RSSLG210 is also available. This report allows the definition of a job that runs regularly and deletes such logs.
    2. Report RSSLGK90: Deleting all logs for which a deletion is allowed before expiration:
    Sometimes, step 1 does not delete enough logs. The reason for this might be that the expiration date of the logs is too far in the future or that no expiration date has been defined at all (in this case, depending
    on the release, the assumed expiration date is 12/31/2098 or 12/31/9999)
    Use report RSSLGK90 for these logs.
    When you execute this report, you can restrict the logs to be deleted in a selection screen:
    The fields 'Object' and 'Subobject' specify the application area which wrote the logs (see F4 help).
    The field 'External number' indicates the number which was assigned by the application for this log.
    Field 'Log class' indicates the importance of the log.
    NOTE: By default, this field contains the value '4', this means only logs with additional information. If you want to delete all logs, enter the value '1' in this field. All logs with log class '1' or higher will then be deleted.
    The fields 'To date' and 'Until time' refer to the creation date of a log.
    If you enter 12/31/1998 and 23:59:59, you get all logs created in and before 1998
    NOTES:
    Client-dependency:
    Note that the application log tables are client-dependent. Therefore, you must delete data in each client.
    Which applications create entires in the application log:
    To determine which applications create the logs, look in Table BALHDR to see which objects the logs were created for ( Transaction SE16, Table BALHDR, Field OBJECT). You can find the text description for the object in Table BALOBJT. The application is usually derived from the name and text of the object. The log is displayed in Transaction SL61. The display is restricted to certain objects, among other things.
    Database error:
    If very many data exists on the DB, Report RSSLGK90 might cause problems. In this case, implement Note 138715.
    In very rare cases a dump is created even after Note 138715 was implemented:
        ABAP/4 runtime error  DBIF_RSQL_SQL_ERROR
        SQL error 1555 occurred accessing table "BALHDR "
        Database error text...: "ORA-01555: snapshot too old
    If you cannot correct the error by means of database utilities, Note 368700 provides a way to bypass this error.
    Report RSSLG200 can also run into problems. In this case, use the correction for Report RSSLG200 attached to this Note.
    Expiration date in Report RSSLGK90:
    There are logs on the database which may only be deleted explicitly after the expiration date (flag DEL_BEFORE = 'X' in table BALHDR). These logs are not deleted in advance by report RSSLGK90. Since, however, this flag is used very rarely, you can ignore this data.
    Restriction of the quantity of log data by the application:
    To avoid large quantities of logs from different applications, also refer to the following notes:
    - 91519
    - 183960
    - 141244
    Archiving logs:
    As of Release 6.20, it has been possible to archive logs.
    The logs are archived via archiving object BC_SBAL.
    The archiving programs are started via Transaction SARA (archive administration).
    Via Support Packages, the archiving of application logs has been made available for Releases 4.6C (SAPKB46C27), 4.6D (SAPKB46D17), and 6.10 (SAPKB61011) as well.
    Header Data
    Release Status: Released for Customer
    Released on: 04.08.2005  13:55:45
    Master Language: German
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: BC-SRV-BAL Basis Application Log
    Affected Releases
    Software
    Component Release From
    Release To
    Release And
    subsequent
    SAP_APPL 30 30F 31I  
    SAP_APPL 40 40A 40B  
    SAP_APPL 45 45A 45B  
    SAP_BASIS 46 46A 46D X
    SAP_BASIS 60 610 640 X
    Corrections Instructions
    Correction
    Instruction Valid
    from Valid
    to Software
    Component Last
    Modifcation
    158903 30F 30F SAP_APPL 16.05.2000  07:13:08
    162069 31H 45B SAP_APPL 16.05.2000  07:16:07
    Related Notes
    1009281 - LAW: Runtime error CONNE_IMPORT_WRONG_COMP_TYPE
    856006 - Mass processing saves unnecessary logs
    737696 - Add. info on upgrade to SAP R/3 Enterprise 4.70 Ext. 2 SR1
    706478 - Preventing Basis tables from increasing considerably
    637683 - Add info about upgrade to SAP R/3 Enterprise Core 4.70 Ext 2
    587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
    540019 - Report RJBTPRLO does not work correctly
    400687 - Delete application log: DBIF_RSQL_INVALID_CURSOR
    390062 - Additional information about upgrading to 4.6C SR2
    370601 - Composite SAP note: APO 3.0 and 3.1 performance
    365602 - M/AM: Sales agent determination log - perf.
    327285 - Additions to upgrade to 4.6C SR1
    183960 - ALE: Deactivating application logs for data transfers
    141244 - Deactivating the application log during data transfer
    138715 - RSSLGK90: Too many lock entries in the database
    118314 - Installing the interface to a separate EH&S
    91519 - Deleting logs of the application log
    Print Selected Notes (PDF) 
    Attributes
    Attribute Value
    Transaction codes BALC
    Transaction codes BALM
    Transaction codes CLEAR
    Transaction codes HIER
    Transaction codes SARA
    Transaction codes

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Need help getting new printer hp deskjet 3520 setup for eprint and wireless

    need help getting new printer hp deskjet 23520 stup for eprint and wireless

    Hi Pastorlee7,
    I see that you're having problems setting up your printer.  I would take a look at the document below.
    Hp deskjet 3520
    Let me know how it goes.  

  • Error message - The HP Deskjet 1510 Series was not found

    I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.

    Hey , Welcome to the HP Support Forums!
    I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below.   Please disconnect the USB Cable from your printer and computer before proceeding.   Step 1:  Remove Driver:  1. Click on your Start button    2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section.   3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall.  4. Next, click on the Start button and type Devices in the 'Ask me Anything' box  5. Click Devices and Printers   6. Under the Devices and Printers window look for your HP Deskjet.  If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window.  8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step.    Step 2: Clear Temp Files:  1. Click on your Start button   2. Type Run. Click Run to launch the Run dialogue box.   3. In the Run box type %temp% and click OK      4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step.    Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck!

Maybe you are looking for