Need Help: Error Message on MacBook Air

Hello,
My MacBook Air keeps showing the following error message after it is woken up from sleep:
I do not have anything plugged in to the ports, and I have tried restarting and shutting down several times. I would appreciate any insight or solutions the community might have. Thank you!

Hello S.W. Tyra
That is interesting, especially since nothing is plugged in. I would start with resetting the SMC and NVRAM on your MacBook Air and then test it out. Let me know if this helps or if you are still having issues.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Regards,
-Norm G.

Similar Messages

PSE 10 "help" - error message re Adobe Air

I am unable to access the PSE help within PSE 10. Each time I get an error message indicating that the problem relates to Adobe Air and that I should re-install it (Adobe Air). I have tried re-installing both Adobe Air and PSE10 but the problem persists - any suggestions
Thanks Dave
PS OS Windows 7 prof (64bit)

A clean re-install should have solved it.
I'd do these steps:
Close PSE.
Use Task Manager's "Processes" tab to kill any running Adobe or PhotoshopElements processes.
Use the Control Panel to uninstall Adobe AIR.
Reboot.
Get the latest version of AIR from here:
http://get.adobe.com/air/
Install AIR.
Ken

Need help to connect from MacBook Air to a Dell 1610HD projector.

I need to mirror the display on my MacBook Air to a projector, I've gone to the System Preferences and it detects my Apple TV but not the Projector need help.

I have tried and I have the partition, but when I try to reinstall Mac OS X then it says that there is a mistake try to reinstall Mac OS X again, then I try to reinstall it again but with no luck, the same problem keeps up coming

NEED HELP error messages - cannot install iTunes upgrade

I'm running Windows Vista.
I've been using iTunes for about a year, no problem.
When I went to download the iTunes latest version I have had nothing but problems. I keep getting this error message on trying to install the upgrade for iTunes, and now I cannot even use iTunes:
iTunes could not be installed because Visual Basic Script (VBscript) is not installed or has been disabled. Make sure VBscript is installed, turn off script blocking in anti-virus and personal firewall software, re-register VBscript, and then install iTunes.
I have no idea what that message means and I need step by step directions on how to find out of perform whatever that message means.
Your help would be GREATLY appreciated.
Dell Optiplex Windows Vista VISTA for Business

even though the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

Need help, error messages

Error messages. Warning: Unresponsive plug-in. Shockwave Flash may be busy, etc. This keeps coming up more
frequently. It does it mainly on my Yahoo home page and on Facebook Games. I've had 4 different tech specialists
try to fix this, unsuccessfully. Another error message says, Your Adobe Flash Plug-in has crashed. I have a laptop,
Windows 8.1, use Mozilla Firefox. Have installed the latest version of the Flash Player. Can you help me? Thanks. Mary

I have had this same issue on a laptop and desktop. i have uninstalled, reinstalled, everything but format my machines. I dont think this is my problem I believe it is an adobe issue. I cant play facebook games or log on yahoo pages, my bank. This has been a bad week so far.

Need help: error message in Log.

Hi,
I got the following error in log file when I open form in LC ES2 workspace. Does anyone solve it before?
WARN [com.adobe.document.XMLFormService] ALC-XTG-029-217: [2800] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
Thanks.

I zeroed in on this same error message today. I can't tell you exactly what was causing it, but I can tell you exactly the object that was causing the issue. It was a 1-row, 2 column table. In one cell was some text that included hyphenation ("in-process"). In another cell was a drop-down menu with only two options defined: pass and fail.
I noticed that as I was scrolling through the document, as long as this particular table was visible, I would get the same "bad hyphenation" message continuously, line after line, and once the screen threw up 8 lines of this same message at once. But once I deleted the object, the error no longer appeared, and when I re-created the same table sans hyphen, no error messages.
I must note that once the error message appeared, when I tried to work with the table-cells, the object no longer functioned as a joined table but instead worked like individual fields.
My suggestion is to go through your document and look for table cells with hyphenated text, delete them completely and then re-type them without the hyphen included, and see if that takes care of the problem. That's how I got rid of my error.

Need help to get my Macbook Air start up

Just anyone knows about an apple macbook air notebook. I by misstake shut it down doing a software update.... now it wont start up.

Shutting down during an update can be very damaging to the stability of the operating system. It can even render the machine unable to boot.
You should probably try to do a "repair install" of the operating system. What version are you running?
For the moment, assuming you have Lion, boot to the Recovery Partition by turning tre computer on, while holing down the Option key. Select the Recover HD, and boot to it.
First run the Disk Utility to "Repair Disk" and Repair Permissions" on the startup drive partition. Then you can either give it another try to boot up normally, and/or proceed to do a reinstallation of Lion. The reinstallation should not disturb your existing data, but as always that is why you have to maintain a backup regimen, just in case the worst happens.
http://support.apple.com/kb/HT4718
Hopefully after you are finished, all your apps will work as before, and none were damaged during the untimely shutdown which precipitated all of this. Again, if it has problems, the alleviation of such is dependednt on the health of your backups.

Re: Need help: error message "reached end of file while parsing"

You are missing a closing brace "}" somewhere near the bottom half of your code.
Edit:
DrClap beat me to it.
Edited by: Jin on Oct 2, 2007 1:33 PM

well i just compiled the source that you have posted. it appears that you have declared a variable called "oper" within the Design method and tried to acces it from within the actionPerformed method (line 136). thats a scope error. one way to eliminate this error is to declare the oper var as global variable, i.e. along with the JButtons and stuff.
another error is at the same place , the last if block. you might wanna use only the equals method like oper.equals("minus"). another way is oper.compareTo.("minus")==0.
I believe this will hold for now. you may find the following stuff helpful, but probably you know this already.....
In order to view your applet you can use an html that looks something like this
<html>
<body>
<applet code="calc" width="400" height="400">
</applet>
</body>
</html>
to test it without a browser issue the command
java sun.applet.AppletViewer app.html
where app.html is the above html file and situated in same folder as calc.class file

Need help-Error Message in HP Deskjet F4288 All-in-One

Please help why I am getting an 'E' in the 'Start Copy' Panel. The Power/Start button light is on and it is not blinking. The Colour Cartridge has red blinking light though it is almost full. The moment I switch on my Printer, I get 'E' and red blinking light only in Colour Print Cartridge. The Black Cartridge is showing its ink level. I had got my Colour Cartridge replaced just some time back. It's level should correctly display being higher than the Black one.
Troubleshooting : I have tried removing the Cartridge and reinstalling them. Though it showed the correct levels in both cartridges- Colour one being nearly double that of the Black, the moment I tried to print, it showed 'E' and again the red blinking light.

this is happening to me i have tried 3 new coour ink cartridges

Need help error message -42404

Its saying something didn't download right but i dont know how to fix it. It took me 3 times to get the download to finish, help

Could you post some minimal diagnostics for us please? (The list of installed components can sometimes give us a heads up on which component hasn't been installing.)
In iTunes, go "Help > Run Diagnostics". Uncheck all four boxes, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Need help downloading cs4 onto macbook air from an external disk drive

All the disks are loaded onto the drive but it gets to a certain point and then asks for insert disk 2. After attempting several times and trying different methods, now the setup menu won't even open.

Hi Emilie,
Kindly try to Download CS4 products.
Here are the install instructions.
Install from desktop | CS4 products | Windows XP, Vista
Install CS4 products | Windows, Mac OS
Thanks,
Atul Saini

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?

An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7)

Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

Startup – Question Mark
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

Need help correcting message error number

Hello, i need help correcting message number for running archiving test runs.
05.08.2011 08:31:42 Message number 999999 reached. Log is full                                BL           252          E
05.08.2011 08:31:42 Job cancelled after system exception ERROR_MESSAGE                        00           564          A
Any help wopuld be appreciated.
Regards.

Summary
Symptom
One or several database tables of the application log contain too many entries.
The following database tables belong to the application log:
- BALHDR (all releases)
- BALHDRP(< 4.6C)
- BALM   (< 4.6C)
- BALMP (< 4.6C)
- BALC   (< 4.6C)
- BALDAT (>= 4.6C)
- BAL_INDX (all releases)
Other terms
RSSLG200,
RSSLGK90,
SLG2,
application log,
log
delete,
performance
Reason and Prerequisites
The application log is a tool to collect, save and display logs.
Many different applications collect messages in the application log which contain information or messages for the end user. The application automatically log serves as a temporary storage for messages. The logs are written on the database but they are not automatically deleted.
There is no general procedure for switching the application log on or off. Some applications provide this option or they offer the option of reducing the number of entries created. (See Notes 91519, 183960, 141244).
The expiration date of application logs
A log usually has an expiration date, which is set by the application, that calls the 'Application log' tool. If the application log does not set an expiration date, the 'Application log' tool sets the expiration date as 12/31/2098 or 12/31/9999,depending on the release, which allows the logs to stay in the system for as long as possible. The end user cannot set the expiration date. The expiration date does not mean that logs which have reached that date will automatically be deleted. It is used to control the deletion of logs when you call the Deletion report. The DEL_BEFORE flag in the BALHDR table determines whether or not the log can be deleted even before the expiration date is reached.
DEL_BEFORE= SPACE means that the log can be deleted before the expiration date is reached. (Default value)
DEL_BEFORE='X' means that the log can only be deleted after the expiration date.
Solution
Deleting the logs of the application log.
Releases >= 4.6A:
=====================================================================
In Releases >= 4.6A, use Transaction SLG2.
On the selection screen you can restrict the amount of logs to be deleted:
The 'Object' and 'Subobject' fields specify the application area in which the logs were written (see F4 Help).
The 'External Identification' field specifies the number which was          provided for this log by the application.
o If you also want to delete logs which have not reached the expiration date you must set the option "Also logs which can be deleted before the expiration date".
Select 'Help with application' in Transaction SLG2 for further explanation of the procedure for deleting.
SLG2 is a report transaction. The corresponding report is SBAL_DELETE. At regular intervals, this can be scheduled as a background job.
Releases < 4.6A:
=====================================================================
For Releases < 4.6A, note the following instructions:
In general, the deletion of application logs can be carried out in two steps:
1. Report RSSLG200: Deletion of all logs which expired:
Use report RSSLG200 to delete all logs whose expiration date is reached or exceeded. (This report is not yet available in the standard in Release 3.0F. In this case, the report can be installed in advance; see corrections attached to this note).
As of Release 3.1H, Report RSSLG210 is also available. This report allows the definition of a job that runs regularly and deletes such logs.
2. Report RSSLGK90: Deleting all logs for which a deletion is allowed before expiration:
Sometimes, step 1 does not delete enough logs. The reason for this might be that the expiration date of the logs is too far in the future or that no expiration date has been defined at all (in this case, depending
on the release, the assumed expiration date is 12/31/2098 or 12/31/9999)
Use report RSSLGK90 for these logs.
When you execute this report, you can restrict the logs to be deleted in a selection screen:
The fields 'Object' and 'Subobject' specify the application area which wrote the logs (see F4 help).
The field 'External number' indicates the number which was assigned by the application for this log.
Field 'Log class' indicates the importance of the log.
NOTE: By default, this field contains the value '4', this means only logs with additional information. If you want to delete all logs, enter the value '1' in this field. All logs with log class '1' or higher will then be deleted.
The fields 'To date' and 'Until time' refer to the creation date of a log.
If you enter 12/31/1998 and 23:59:59, you get all logs created in and before 1998
NOTES:
Client-dependency:
Note that the application log tables are client-dependent. Therefore, you must delete data in each client.
Which applications create entires in the application log:
To determine which applications create the logs, look in Table BALHDR to see which objects the logs were created for ( Transaction SE16, Table BALHDR, Field OBJECT). You can find the text description for the object in Table BALOBJT. The application is usually derived from the name and text of the object. The log is displayed in Transaction SL61. The display is restricted to certain objects, among other things.
Database error:
If very many data exists on the DB, Report RSSLGK90 might cause problems. In this case, implement Note 138715.
In very rare cases a dump is created even after Note 138715 was implemented:
    ABAP/4 runtime error DBIF_RSQL_SQL_ERROR
    SQL error 1555 occurred accessing table "BALHDR "
    Database error text...: "ORA-01555: snapshot too old
If you cannot correct the error by means of database utilities, Note 368700 provides a way to bypass this error.
Report RSSLG200 can also run into problems. In this case, use the correction for Report RSSLG200 attached to this Note.
Expiration date in Report RSSLGK90:
There are logs on the database which may only be deleted explicitly after the expiration date (flag DEL_BEFORE = 'X' in table BALHDR). These logs are not deleted in advance by report RSSLGK90. Since, however, this flag is used very rarely, you can ignore this data.
Restriction of the quantity of log data by the application:
To avoid large quantities of logs from different applications, also refer to the following notes:
- 91519
- 183960
- 141244
Archiving logs:
As of Release 6.20, it has been possible to archive logs.
The logs are archived via archiving object BC_SBAL.
The archiving programs are started via Transaction SARA (archive administration).
Via Support Packages, the archiving of application logs has been made available for Releases 4.6C (SAPKB46C27), 4.6D (SAPKB46D17), and 6.10 (SAPKB61011) as well.
Header Data
Release Status: Released for Customer
Released on: 04.08.2005 13:55:45
Master Language: German
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-SRV-BAL Basis Application Log
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 30 30F 31I
SAP_APPL 40 40A 40B
SAP_APPL 45 45A 45B
SAP_BASIS 46 46A 46D X
SAP_BASIS 60 610 640 X
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Last
Modifcation
158903 30F 30F SAP_APPL 16.05.2000 07:13:08
162069 31H 45B SAP_APPL 16.05.2000 07:16:07
Related Notes
1009281 - LAW: Runtime error CONNE_IMPORT_WRONG_COMP_TYPE
856006 - Mass processing saves unnecessary logs
737696 - Add. info on upgrade to SAP R/3 Enterprise 4.70 Ext. 2 SR1
706478 - Preventing Basis tables from increasing considerably
637683 - Add info about upgrade to SAP R/3 Enterprise Core 4.70 Ext 2
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
540019 - Report RJBTPRLO does not work correctly
400687 - Delete application log: DBIF_RSQL_INVALID_CURSOR
390062 - Additional information about upgrading to 4.6C SR2
370601 - Composite SAP note: APO 3.0 and 3.1 performance
365602 - M/AM: Sales agent determination log - perf.
327285 - Additions to upgrade to 4.6C SR1
183960 - ALE: Deactivating application logs for data transfers
141244 - Deactivating the application log during data transfer
138715 - RSSLGK90: Too many lock entries in the database
118314 - Installing the interface to a separate EH&S
91519 - Deleting logs of the application log
Print Selected Notes (PDF)
Attributes
Attribute Value
Transaction codes BALC
Transaction codes BALM
Transaction codes CLEAR
Transaction codes HIER
Transaction codes SARA
Transaction codes

Error message generating Adobe Air output Unable to build a valid certificate chain for the signer

error message generating Adobe Air Output: Unable to build a valid certificate chain for the signer.

Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
If you are using RoboHelp, which version?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Need Help: Error Message on MacBook Air

Similar Messages

Maybe you are looking for